Simultaneous demodulation and dispersion compensation of WDM DPSK channels using optical ring resonator

We have introduced and comprehensively analyzed a novel scheme of simultaneous demodulation and dispersion compensation of wavelength division multiplexed (WDM) non-return-to zero (NRZ) differential phase shift keying (DPSK) optical link using an optical ring resonator (ORR) based filter. Using extensive numerical simulation we have demonstrated the transmission of 10.7 Gb/s WDM DPSK channels having 50 GHz and 100 GHz spacing over 400 km of unrepeatered reach at 20 dB optical-signal-to-noise-ratio (OSNR) to achieve a bit error rate (BER) of 10^? 3.     

Flat and compact switchable dual wavelength output at 1060 nm from ytterbium doped fiber laser with an AWG as a wavelength selector

A dual-wavelength ytterbium doped fiber laser with a narrowest spacing of 0.53 nm and widest spacing of 12.2 nm at 1064 nm is presented in this paper. An arrayed waveguide grating (AWG) together with an optical channel selector (OCS) have also been incorporated in the proposed setup that works as a switchable mechanism giving 23 different wavelength tunings. Producing an average output power of ?8 dB m and side mode suppression ratio (SMSR) of 59.65 dB, this dual-wavelength fiber laser is quite stable with an output power variance as low as 0.47 dB giving it an advantage due to its switching ability and stable dual-wavelength output powers.     

Novel optical add-drop multiplexer based on dual racetrack resonators

In this paper, we designed and fabricated a four-channel optical add-drop multiplexer (OADM) based on dual racetrack resonators. The size of the fabricated device is only 2400 μm × 500 μm. The fabricated device can effectively and perfectly realize the signals upload and download. The free spectral range (FSR) of OADM is about 15.2 nm. We take the spectral responses near 1555 nm as an example. When the device acts as an optical drop multiplexer, the minimum insertion loss is 4.481 dB and the maximum extinction ratio is 31.931 dB. The maximum adjacent channels crosstalk is -9.845 dB. When the device acts as an optical add multiplexer, the minimum insertion loss is 0.944 dB and all of the extinction ratios are bigger than 25 dB. The maximum crosstalk is -16.531 dB which indicates the crosstalk can be neglected.     

A filterless optical millimeter-wave generation based on frequency octupling

A novel method of a filterless optical millimeter-wave (MMW) signal generation with frequency octupling using four nested Mach–Zehnder modulators (MZMs) is proposed for Radio-over-fiber systems. By symmetrically biasing the MZMs and using two RF driving signals with 90 deg phase delay, a cost-effective, high-quality and filterless optical millimeter-wave at 80 GHz with an optical harmonic distortion suppression ratio exceeding 40 dB is obtained. The proposed system is insensitive to the MZM bias drift, which demonstrates a relatively higher stability. So it is a viable solution for the future ultra-high frequency MMW applications.     

10 Gb/s optical carrier distributed network with W-band (0.1 THz) short-reach wireless communication system

Millimeter-wave (mm-wave) operated in W-band (75 GHz–0.11 THz) is of particular interests, since this frequency band can carry signals at much higher data rates. We demonstrate a 10 Gb/s optical carrier-distributed network with the wireless communication system. The mm-wave signal at carrier frequency of 0.1 THz is generated by a high speed near-ballistic uni-traveling carrier photodiode (NBUTC-PD) based transmitter (Tx), which is optically excited by optical short pulses. The optical pulse source is produced from a self-developed photonic mm-wave waveform generator (PMWG), which allows spectral line-by-line pulse shaping. Hence these optical pulses have high tolerance to fiber chromatic dispersion. The W-band 10 Gb/s wireless data is transmitted and received via a pair of horn antennas. The received 10 Gb/s data is envelope-detected and then used to drive an optical modulator at the remote antenna unit (RAU) to produce the upstream signal sending back to the central office (CO). 20 km single mode fiber (SMF) error free transmission is achieved. Analysis about the optimum repetition rate of the optical pulse source and the transmission performance of the upstream signal are also performed and discussed.     

Numerical analysis of a direct UV-written 1 × 8 double smooth octagon microrings resonant wavelength demulti/multiplexer

A microring resonant wavelength demulti/multiplexer (MRRWDM) based on UV-written technology is designed. By using a double smooth octagon microrings structure, a 1 × 8 device around the central wavelength of 1550.918 nm with the wavelength spacing of 1.4 nm is presented. Analytical results based on coupled mode theory show that the 3 dB bandwidth is about 0.22 nm, the insertion loss is less than 0.7 dB, and the crosstalk is below ?47 dB for every output channel of the designed device without tolerances.     

High-bandwidth and low-loss photonic crystal power-splitter with parallel output based on the integration of Y-junction and waveguide bends

A 1×2 power-splitter with parallel output that exhibits high-bandwidth and low-loss splitting for TE-polarized light is designed based on a photonic crystal slab in a silicon-on-insulator (SOI) material. The high performance is achieved by the integration of a Y-junction and 60° waveguide bends, which is designed to ensure single-mode operation, and keep the output channels of the power-splitter be parallel to the input channel. With a three-dimensional finite-difference time-domain (3D-FDTD) technique, ultralow-loss output of the optimized power-splitter with normalized transmission above 45% (in the range 3.216±0.18 dB) is obtained in the high-bandwidth range 1472–1634 nm, which covers the entire C-band of optical communication. In addition, the simulation results demonstrate that when the manufacture error of the lattice shift (dx) is in the range of ±10 nm, the disturbance of the transmission and the bandwidth are 1.52% and 6.79%, respectively. Both the specific result and the general idea of integration design are promising in the optical integrated circuit (OIC) and integrated optical devices in the future.     

A novel polarization splitter in ZnTe tellurite glass three-core photonic crystal fiber

A kind of polarization splitter in ZnTe tellurite glass three-core photonic crystal fiber has been proposed. The polarization splitter is based on the phenomenon of resonant tunneling. We use the finite element method and the full-vector beam propagating method to analyze the characteristics of three-core photonic crystal fiber. Compare with the silica glass three-core PCF, the ZnTe tellurite glass three-core PCF have higher extinction ratios and lower coupling loss, the extinction ratios ERA = ? 164.2681 dB and ERC = ? 37.1742 dB at the wavelength λ = 1.55 μm, and the coupling loss is lower than 0.02 dB. The 8.7983-mm-long splitter is proposed to achieve extinction ratio better than ? 20 dB and a bandwidthof 20 nm.     

An energy-efficient tie-type architecture for stable and wavelength-tunable SOA-based fiber laser

A new and energy-efficient tie-type architecture for stable and wavelength-tunable semiconductor optical amplifier (SOA)-based fiber ring laser is proposed and experimentally investigated. Here, the tie-type laser configuration is constructed by two Sagnac fiber loops. The proposed laser also can extend the lasing wavelength to longer wavelength (L-band) even only the C-band SOA is used. The proposed tie-type architecture has >5 dB higher output optical power at bias current of 80 mA when compared with the single ring SOA-based fiber laser. In this measurement, the output power, wavelength tuning range, side-mode suppression ratio (SMSR) and output stability of proposed fiber laser have also been analyzed and discussed.     

1.55 μm silicon-based reflection-type waveguide-integrated thermo-optic 2 × 2 switch

In this work a waveguide-integrated 2 × 2 switch operating at the infrared communication wavelength of 1550 nm is proposed and theoretically discussed. The device is based on the total internal reflection (TIR) phenomenon and the thermo-optic effect (TOE) in hydrogenated amorphous silicon (a-Si:H) and crystalline silicon (c-Si). It takes advantage of a bandgap-engineered a-Si:H layer to explore the properties of an optical interface between materials showing similar refractive indexes but different thermo-optic coefficients. In particular, thanks to modern plasma-enhanced chemical vapour deposition (PECVD) techniques, the refractive index of the amorphous film can be properly tailored to match that of c-Si at a given temperature. TIR may be therefore achieved at the interface by acting on the temperature. The device is integrated in a 4 μm-wide and 3 μm-thick single-mode rib waveguide. The substrate is a silicon-on-insulator (SOI) wafer with an oxide thickness of 500 nm. We calculated an output crosstalk always better than 24 dB and insertion losses as low as 3.5 dB.     

High speed ultra short pulse fiber ring laser using photonic crystal fiber nonlinear optical loop mirror

A scheme to generate high speed optical pulse train with ultra short pulse width is proposed and experimentally studied. Two-step compression is used in the scheme: 20 GHz and 40 GHz pulse trains generated from a rational harmonic actively mode-locked fiber ring laser is compressed to a full width at half-maximum (FWHM) of ~ 1.5 ps using adiabatic soliton compression with dispersion shifted fibers (DSF). The pulse trains then undergo a pedestal removal process by transmission through a cascaded two photonic crystal fiber (PCF)-nonlinear optical loop mirrors (NOLM) realized using a double-ring structure. The shortest output pulse width obtained was ~ 610 fs for 20 GHz pulse train and ~ 570 fs for 40 GHz pulse train. The signal to noise ratio of the RF spectrum of the output pulse train is larger than 30 dB. Theoretical simulation of the NOLM transmission is conducted using split-step Fourier method. The results show that two cascaded NOLMs can improve the compression result compared to that for a single NOLM transmission.     

Advanced multifunctional optical switch for multimode optical fiber networks

In this work, an advanced multifunctional optical switch based on multimode fibers is proposed. It can work as a 3 × 1 optical multiplexer/combiner, a 2 × 2 optical switch, a variable optical attenuator and a variable optical power splitter. All these functionalities can be developed in the same device without any hardware modification, only by using the proper ports and control electronics.The proposed switch has been developed for being used in the visible and near infrared wavelength range: 450–650 nm for optical fiber automobile applications, 650–850 nm for home broadband applications; and 850–1300 nm for multimode fiber access networks. Up to three different types of twisted nematic liquid crystal cells have been designed and fabricated for fulfilling these different wavelength ranges as part of the proposed device.The multifunctional switch has been implemented and experimentally tested. Crosstalk usually better than ? 15 dB at 532 nm, 660 nm and 850 nm, in any state has been measured. Switching is achieved at voltage levels of 4 Vrms. Fiber to fiber insertion losses when operating as a 2 × 2 optical switch, range from 10 to 15 dB within 200 nm wavelength range; with a non-optimized optics for collimation and coupling.     

Multi-wavelength bismuth-based erbium-doped fiber laser based on four-wave mixing effect in photonic crystal fiber

A stable multi-wavelength erbium-doped fiber laser based on four-wave mixing (FWM) in a photonic crystal fiber (PCF) is demonstrated in this paper. The phase matching condition for four-wave mixing in the photonic crystal fiber has been enhanced using a seed signal and a polarisation controller to control the states of polarisation in the ring laser cavity. At a maximum pump power of 1480 nm, 5 lines are observed with nearly 2.15 nm spacing between the lines, and with a signal to noise ratio of more than 20 dB. The number of channels and wavelength spacing can be controlled by varying the output coupler ratio.     

Third-order photonic-crystal distributed-feedback quantum cascade lasers

We demonstrate room-temperature operation of broad-area edge-emitting photonic-crystal distributed-feedback quantum cascade lasers at λ ～ 4.6 μm. The lasers use a weak-index perturbed third-order photonic-crystal lattice to control the optical mode in the wafer plane. Utilizing this coupling mechanism, the near-diffraction-limited beam quality with a far-field profile normal to the facet can be obtained. Single-mode operation with a signal-to-noise ratio of about 20 dB is achieved in the temperature range of 85–290 K. The single-facet output power is above 1 W for a 55 μm × 2.5 mm laser bar at 85 K in pulsed mode.     

Improving the performance of electrical duty-cycle division multiplexing with optimum signal level spacing

Performance optimization of 3 × 10 Gbps conventional electrical-duty-cycle division multiplexing (C-E-DCDM) technique is investigated. It is shown that controlling signal level spacing can optimize its performance. Two level spacing optimization techniques, one in electrical domain and another in optical domain are examined. In general, performance of the C-E-DCDM is improved significantly using both approaches. The results show by optimization, an improvement of around 5.5 dB can be achieved for the C-E-DCDM in terms of receiver sensitivity and optical signal-to-noise ratio using both electrical and optical methods. However, chromatic dispersion tolerance in one of the optimization approaches is degraded by around 34 ps/nm for negative dispersion, while the positive dispersion tolerance improved compared to the C-E-DCDM.     

Improvement of polarization extinction in silicon waveguide devices

The SOI based waveguide devices are found to be highly polarization sensitive. Unwanted polarization excitations can be attenuated by integrating a TE- or TM-pass polarizer. A large attenuation of TM-polarized light has been observed when a thin film of metal is coated on the top of silicon rib waveguide, while TE-polarized light remains almost unaffected. The attenuation of TM-polarized light is attributed to the plasmonic absorption of the evanescent field in the metal cladding. Typically, with an Al cladding of thickness ～ 100 nm and a length of 1 mm on top of a single-mode (λ ～ 1550 nm) SOI rib waveguide structure, TE vs TM extinction ratio of ～ 15 dB has been obtained. Integrating such waveguide polarizers in a directional coupler and MZI based DWDM channel interleaver, we have also achieved an improvement in polarization extinction by ～ 15 dB.     

Design and VNA-measurement of coplanar waveguide (CPW) on benzocyclobutene (BCB) at THz frequencies

The low permittivity and the low loss tangent of the benzocyclobutene polymer (BCB) offers to coplanar waveguides (CPW) a low dispersive propagation properties at THz frequency. These transmission lines have been designed, modeled with a three dimensional (3D) solver of Maxwell equations based on finite element method (FEM) from 20 to 1000 GHz at various characteristic impedances (Z_c). Their dispersion and losses (radiation, conduction and dielectric) have been investigated separately versus the waveguide size, the nature of the substrate (dielectric or semiconductor) to optimize the THz signal propagation. Monomode CPW on BCB numerically designed for various Z_c were realized and measured with vector network analyzer (VNA). S-parameters of CPW are de-embedded by optimization of the accesses’ model. A good agreement is found between experimental and numerical results with low attenuation constants of 2.7 dB/mm and 3.5 dB/mm at 400 GHz and 500 GHz, respectively.     

Sub-THz continuous wave generation scheme using high-order harmonics modulated lightwave

We propose a sub-THz continuous wave (CW) generation scheme using a high-order harmonics modulated lightwave (HML) to reduce an electronic dependency of a conventional double sideband suppressed carrier (DSB-SC) scheme. The electronic dependency should be overcome to increase frequency tunability of the conventional DSB-SC scheme. This is because the frequency of a local oscillator (LO), f_LO, should be one-half frequency of the frequency of a desired sub-THz CW in the conventional DSB-SC scheme. The proposed scheme is formed by adding an optical feedback loop to the conventional DSB-SC scheme. In order to verify our proposed scheme, a 120 GHz CW is generated using the LO with f_LO = 20 GHz. Based on our experimental results, we have found that the frequency of the LO can be reduced by our proposed scheme up to one-sixth (20 GHz) of 120 GHz. The 120 GHz CW generated by the proposed scheme has 52 dB higher photomixed output power with narrow spectral linewidth than that of the 120 GHz CW generated by the conventional DSB-SC scheme using the LO with f_LO = 20 GHz. Consequently, our proposed scheme can be helpful to reduce the electronic dependency of the conventional DSB-SC scheme.     

Inherently gain flattened S-band erbium doped fiber amplifier based on dual core resonant leaky fiber

A co-axial dual core resonant leaky optical fiber (DCRLF) is designed for inherent gain equalization of S-band erbium doped fiber amplifier (EDFA). Resonance tail of leakage loss of the fiber into the S-band region is utilized to flatten the gain. We have numerically studied the effect of various design parameters and their fabrication tolerances on gain flattening. We show 23.5 dB flat gain with ± 0.9 dB ripple over 30 nm bandwidth (1490–1520 nm) using 120 mW pump. The study should be useful in designing optical fiber amplifiers for optical communication system employing wavelength division multiplexing.     

Proposal for a 4-channel all optical demultiplexer using 12-fold photonic quasicrystal

In this work, 12-fold photonic quasicrystal (PQC) with cross section equals to 138 μm² has been used to design a 4-channel optical demultiplexer. The size of structure promises its applications in optical integrated circuits (OICs) and also, wavelength division multiplexing (WDM) communication devices. Finite difference time domain (FDTD) method has been employed in order to investigate the structure's band gap and output waveforms of each channel. Four channels, with spacing less than 1 nm and cross-talk level better than ? 2.8 dB have been separated by introducing defects in L-shaped and line defect waveguides (LDWs) in the crystal's structure. It has been shown that, L-shaped waveguides (LWs) are quite more frequency selective than line defect waveguides. Also, it has been found that the exact tuning of the central wavelength of each channel is possible by making use of defects with different radiuses and sites in the waveguides.