Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Rare earth metal bis(alkyl) complexes bearing a monodentate arylamido ancillary ligand: Synthesis,structure, and Olefin polymerization catalysis

The reaction of Ln(CH₂SiMe₃)₃(thf)₂ with 1 equiv. of the amine ligand 2,6-ⁱPr₂C₆H₃NH(SiMe₃) gave the corresponding amido-ligated rare earth metal bis(alkyl) complexes [2,6-ⁱPr₂C₆H₃N(SiMe₃)]Ln(CH₂SiMe₃)₂(thf) (Ln = Sc (1), Y (2), Ho (3), Lu (4)), which represent rare examples of bis(alkyl) rare earth metal complexes bearing a monodentate anionic ancillary ligand. In the case of Gd, a similar reaction gave the bimetallic complex Gd₂(μ-CH₂SiMe₂NC₆H₃ⁱPr₂-2,6)₃(thf)₃ (5) through intramolecular C–H activation of a methyl group of Me₃Si on the amido ligand by Gd–CH₂SiMe₃ and the subsequent ligand redistribution. Complexes 1–5 were structurally characterized by X-ray analyses. On treatment with 1 equiv of [Ph₃C][B(C₆F₅)₄] in toluene at room temperature, complexes 1–4 showed high activity for the living polymerization of isoprene. The 1/[Ph₃C][B(C₆F₅)₄] system showed high activity also for the polymerization of 1-hexene and styrene.     

Synthesis,characterization and fluorescence properties of hexanuclear zinc(II) complexes

Two hexanuclear zinc(II) complexes, [Zn₆(L¹)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · CH₃CN (1 · CH₃CN) and [Zn₆(L²)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · 4CH₃CN (2 · 4CH₃CN), where HL¹ = 4-methyl-2,6-bis(cyclohexylmethyliminomethyl)-phenol and HL² = 4-methyl-2,6-bis(1-naphthalylmethyliminomethyl)-phenol, have been synthesized and characterized by elemental analysis, FT-IR and fluorescence spectroscopic methods, and by X-ray diffraction analysis. In the asymmetric unit of complex 1, two of the three zinc atoms have pentacoordinate geometries and the other is tetrahedrally coordinated, whereas the three distinct Zn atoms in complex 2 adopt three different coordination environments, namely distorted octahedral, trigonal bipyramidal and tetrahedral. The fluorescence properties of the ligands and complexes have been investigated.     

Heterofunctionalized phosphines derived from (2-formylphenyl)diphenylphosphine and their reactions with oxorhenium(V) complexes

Reactions of [ReOCl₃(PPh₃)₂] with a potentially tridentate Schiff base derived from (2-formylphenyl)diphenylphosphine and 2-aminophenol, HL¹P, (HL¹P = Ph₂PC₆H₄-2-HCN(C₆H₄-2-OH)) result in a rapid decomposition of the Schiff base and the formation of a large number of hitherto non-identified metal-containing species, while from similar reactions with the analogoue phosphine oxide HL¹PO, (HL¹PO = Ph₂P(O)C₆H₄-2-HCN(C₆H₄-2-OH)) products of the compositions [ReOCl₂(PPh₃)(L¹PO)] (1) and [Re(NC₆H₄-2-OH)Cl₃(PPh₃)₂] (2) could be isolated. The structure of 2 is an experimental proof of the preceding, metal-induced cleavage of the C–N double bond. A subsequent reaction of the released 2-aminophenol forms the final phenylimido ligand.Reduction of HL¹P with NaBH₄ gives the phosphine amine H₂L²P (H₂L² = Ph₂P(C₆H₄-2-CH₂NH(C₆H₄-2-OH))) in good yield. Reactions of H₂L²P with common oxorhenium(V) complexes result in the formation of the stable rhenium(V) complex [ReOCl₂(HL²P)] (3) with a facially coordinated HL²P^? ligand.     

Rare earth metal bis(alkyl) complexes bearing amino phosphine ligands: Synthesis and catalytic activity toward ethylene polymerization

Reactions of neutral amino phosphine compounds HL^1-3 with rare earth metal tris(alkyl)s, Ln(CH₂SiMe₃)₃(THF)₂, afforded a new family of organolanthanide complexes, the molecular structures of which are strongly dependent on the ligand framework. Alkane elimination reactions between 2-(CH₃NH)-C₆H₄P(Ph)₂ (HL¹) and Lu(CH₂SiMe₃)₃(THF)₂ at room temperature for 3 h generated mono(alkyl) complex (L¹)₂Lu(CH₂SiMe₃)(THF) (1). Similarly, treatment of 2-(C₆H₅CH₂NH)-C₆H₄P(Ph)₂ (HL²) with Lu(CH₂SiMe₃)₃(THF)₂ afforded (L²)₂Lu(CH₂SiMe₃)(THF) (2), selectively, which gradually deproportionated to a homoleptic complex (L²)₃Lu (3) at room temperature within a week. Strikingly, under the same condition, 2-(2,6-Me₂C₆H₃NH)-C₆H₄P(Ph)₂ (HL³) swiftly reacted with Ln(CH₂SiMe₃)₃(THF)₂ at room temperature for 3 h to yield the corresponding lanthanide bis(alkyl) complexes L³Ln(CH₂SiMe₃)₂(THF)_n (4a: Ln = Y, n = 2; 4b: Ln = Sc, n = 1; 4c: Ln = Lu, n = 1; 4d: Ln = Yb, n = 1; 4e: Ln = Tm, n = 1) in high yields. All complexes have been well defined and the molecular structures of complexes 1, 2, 3 and 4b-e were confirmed by X-ray diffraction analysis. The scandium bis(alkyl) complex activated by AlEt₃ and [Ph₃C][B(C₆F₅)₄], was able to catalyze the polymerization of ethylene to afford linear polyethylene.     

Supramolecular aspects of iron(II) crown-dipyridyl spin-crossover compounds

The synthesis, structures and magnetism of the complexes [Fe^II(3-bpp)₂][bpmdcK](SeCN)_1.7(ClO₄)_1.3·MeOH·H₂O (1), [Fe^II(3-bpp)₂]₄[bpmdcH₂(H₂O)₂](ClO₄)₁₀·7H₂O·3MeOH (2) and cis-[Fe^II₂(NCSe)₂((3,5-Me₂pz)₃CH)₂(μ-bpmdc)]·2MeCN (3) (where 3-bpp = 2,6-di(pyrazole-3yl)pyridine, bpmdc = N,N′-bis(4-pyridyl-methyl)diaza-18-crown-6) and (3,5-Me₂pz)₃CH = tris(3,5-dimethylpyrazole)methane, are presented. These compounds form a study of the supramolecular influence of host–guest/crown-ether interactions and cation-to-crown hydrogen-bonding effects upon d⁶ spin transitions, the latter occurring above, or near to, room temperature in 1 and 2. Desolvation effects also influence the T_1/2 values. The dinuclear compound 3 contains covalent pyridyl (crown) N to Fe bridge bonding and remains high spin.     

Rare-earth metal dichloride and bis(alkyl) complexes containing amidinate-amidopyridinate ligands: synthesis,structure, and reactivity

A reaction of anhydrous yttrium chloride with an equimolar amount of lithium amidinateamidopyridinate obtained in situ by metallation of N,N’-bis(2,6-dimethylphenyl)-N-{6-[(2,6-dimethylphenyl)amino]pyridin-2-yl}acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N(2,6-Me₂C₆H₃)C(Me)=N(2,6-Me₂C₆H₃), L¹H) (1) with n-butyllithium in THF at–70 °C was used to synthesize the yttrium dichloride complex (L¹)YCl₂(THF)₂ (2). The lutetium bis(alkyl) complex, namely, N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl-N-{6-[(2,6-dimethylphenyl)amido]pyridin-2-yl}acetimidoamidinatebis(trimethylsilylmethyl)lutetium (4), was obtained by the reaction of N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl)-N-(6-((2,6dimethylphenyl)amino)pyridin-2-yl)acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N-(2,6-Me₂C₆H₃)C(Me)=N(2,6-Pr ₂ ⁱ C₆H₃), L²H (3)) with an equimolar amount of Lu(CH₂SiMe₃)₃(THF)₂. Complex 4 was found to be very stable and did not show indications of C—H-activation and other kinds of disintegration in benzene or toluene solution even upon prolonged heating at 60 °C. The reaction of complex 4 with an equimolar amount of 2,6-diisopropylaniline in toluene solution at room temperature led to the formation of the lutetium alkyl-anilide complex (L²)Lu(CH₂SiMe₃)(NH-2,6-Pr ₂ ⁱ C₆H₃) (5). A three-component system 4—AlBu ₃ ⁱ —[X][B(C₆F₅)₄] ([X] = [Ph₃C], [PhNHMe₂], the molar ratio of 1: 10: 1) was found to catalyze polymerization of isoprene.     

Bis(alkyl) yttrium complex containing a new tridentate amidinate ligand: synthesis and structure

New potentially tridentate amidine containing the quinoline fragment in the lateral chain, viz., NC₉H₆-8-NHC(Bu^t)N-2,6-Prⁱ ₂-C₆H₃ (1), was synthesized by the reaction of chloroimine 2,6-Prⁱ ₂-C₆H₃-N=C(Bu^t)Cl and lithium derivative of 8-aminoquinoline NC₉H₆-8-NHLi. The elimination of alkane under the action of amidine 1 on Y(CH₂SiMe₃)₂(THF)₂ in THF affords bis(alkyl) yttrium complex [NC₉H₆-8-NC(Bu^t)N-2,6-Prⁱ ₂-C₆H₃]Y(CH₂SiMe₃)₂(THF) (2), monomeric in the crystalline state.     

Activation process of 3-alkyl-substituted ansa-bis(indenyl) zirconocenes by MAO

The ansa-indene compound {1-Me₂Si(3-C₉H₆Et)₂} (1) was prepared by alkylation of the unsubstituted ansa-indene. This compound was converted, by reaction with nBuLi, to the dilithium compound [Li₂{1-Me₂Si(3-C₉H₅Et)₂}] (2). ansa-Zirconocene [Zr{1-Me₂Si(3-η⁵-C₉H₅Et)₂}Cl₂] (3) was prepared by the reaction of ZrCl₄ with 2 in ether/toluene at −78 °C. The molecular structure of meso-3 was determined by single crystal X-ray diffraction studies. The ansa-zirconocene 3 exhibits a greater activity in ethylene polymerization than reference complexes such as [Zr{1-Me₂Si(η⁵-C₉H₆)₂}Cl₂] and [Zr{1-C₂H₄(η⁵-C₉H₅)₂}Cl₂] and, in addition, it maintained a reasonable level of activity after 12 h of contact with MAO solution. Furthermore, the different elementary steps in the activation process of ethylene polymerization for substituted complexes [Zr{1-Me₂Si(3-η⁵-C₉H₅R)₂}Cl₂] (R = Et 3, Me 4, nPr 5 and nBu 6) by commercial methylaluminoxane (MAO) have been studied by UV–vis spectroscopy. Addition of MAO in large excess ([Al]/[Zr] = 2000) at −78 °C yields a previously unreported intermediate in the activation process of metallocenes; this intermediate has an absorption band centered at λ = 639 nm. We report here the influence of the type of catalyst, ring substitution, type of cocatalyst and addition of THF on the activation process of these metallocenes.     

Dimeric and monomeric palladium(II) parent-amido (NH2) complexes: Synthesis,characterization, and reactivity

The treatment of [PdL₃(NH₃)]OTf (L₃ = (PEt₃)₂(Ph) (1), (2,6-(Cy₂PCH₂)₂C₆H₃) (3)) with NaNH₂ in THF afforded dimeric and monomeric parent-amido palladium(II) complexes with bridging and terminal NH₂, respectively, anti-[Pd(PEt₃)(Ph)(μ-NH₂)]₂ (2) and Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂) (4). The dimeric complex 2 crystallizes in the space group P2₁/n with a = 13.228(2) Å, b = 18.132(2) Å, c = 24.745(2) Å, β = 101.41(1)°, and Z = 4. It has been found that there are two crystallographically independent molecules with Pd(1)–Pd(2) and Pd(3)–Pd(4) distances of 2.9594 (10) and 2.9401(9) Å, respectively. The monomeric amido complex 4 protonates from trace amounts of water to give the cationic ammine species [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₃)]⁺. Complex 4 reacts with diphenyliodonium triflate ([Ph₂I]OTf) to give aniline complex [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂Ph)]OTf (5). Reaction of 4 with dialkyl acetylenedicarboxylate (DMAD, DEAD) yields diastereospecific palladium(II) vinyl derivative (Z)–(Pd(Cy₂PCH₂)₂C₆H₃)(CR = CR(NH₂)) (R = CO₂Me (6a), CO₂Et (6b)). Reacting complexes 6a and 6b with p-nitrophenol produces (Pd(Cy₂PCH₂)₂C₆H₃)(OC₆H₄–p-NO₂) (8) and cis-CHR = CR(NH₂), exclusively.     

Reactions of alkali metal and yttrium alkyls with a sterically demanding bis(aryloxysilyl)methane: Formation of aryloxide complexes by Si-O bond cleavage

Reaction of bis(bromodimethylsilyl)methane (BrSiMe₂)₂CH₂ (1) with two equivalents of 2,6-diisopropylphenol (Ar′OH) in the presence of the auxiliary base NEt₃ affords the bis(aryloxysilyl)methane (Ar′OSiMe₂)₂CH₂ (2) as a colourless oil following work-up. The reaction of 2 with [Li(Buⁿ)] in the presence of [K(OBu^t)] promoted Si-O bond cleavage and the sole isolable product from this reaction was found to be the colourless, crystalline heterobimetallic complex [{Li(OAr′)}₂{K(OAr′)}₂(THF)₄] (3). The in situ reaction of 2 with one equivalent of [Li(Buⁿ)] in the presence of one equivalent of [K(OBu^t)] and subsequent addition to one equivalent of [Y(I)₃(THF)_3.5] afforded colourless, crystalline [Y(OAr′)(I)₂(THF)₃] (4) as the only isolable product. No reaction was observed between [Y(Bn)₃(THF)₃] (Bn = CH₂C₆H₅) and one equivalent of 2 in toluene at room temperature; heating solutions led to decomposition and recovery of 2. In THF, the reaction between 2 and one equivalent of [Y(Bn)₃(THF)₃] resulted in Si-O bond cleavage with concomitant Si-C bond formation to give (BnSiMe₂)₂CH₂ (5) as a colourless oil and the colourless, crystalline compounds [Y(OAr′)₂(Bn)(THF)] (7), and [Y(OAr′)₃(THF)₂] (8) which were separated by fractional crystallisation. In an attempt to prepare 7 by a rational route, [Y(OAr′)₂(I)(THF)₂] (6) was prepared from the reaction of [Y(I)₃(THF)_3.5] with two equivalents of [K(OAr′)]. However, although 6 could be prepared by a rational salt elimination route, attempts to convert it to 7 resulted instead in 8 being recovered as the only isolable product. This is proposed to be the result of Schlenk-type equilibria, which is supported by the observation that dissolution of pure 6 in benzene results in the additional presence of 8 in the ¹H NMR spectrum over 12 h. Compound 7 was prepared rationally from the reaction between [Y(Bn)₃(THF)₃] and two equivalents of HOAr′. However, although crystalline 7 could be isolated in sufficient quantities for analysis, NMR spectra were consistent with the formation of 8 in solution from Schlenk-type equilibria. Compounds 2–8 have been variously characterised by X-ray diffraction, NMR and FTIR spectroscopy, and CHN microanalyses.     

Luminescent coordination polymers with extended Au(I)–Ag(I) interactions supported by a pyridyl-substituted NHC ligand

Reaction of [Ag(CH₃impy)₂]PF₆, 1, with Au(tht)Cl produces the monometallic Au(I)-species [Au(CH₃impy)₂]PF₆, 2. Treatment of 2 with excess AgBF₄ in acetonitrile, benzonitrile or benzylnitrile produces the polymeric species {[AuAg(CH₃impy)₂(L)](BF₄)₂}_n, (L = CH₃CN,3; L = C₆H₅CN, 4; L = C₆H₅CH₂CN, 5) where the Au(I) centers remain bound to two carbene moieties while the Ag(I) centers are coordinated to two alternating pyridyl groups and a solvent molecule (L). Reaction of 2 with AgNO₃ in acetonitrile produces the zig-zag mixed-metal polymer {[AuAg(CH₃impy)₂(NO₃)]NO₃}_n, 6, that contains a coordinated nitrate ion in place of the coordinated solvent species. All of these polymeric materials are dynamic in solution and dissociate into their respective monometallic components. Compounds 2–6 are intensely luminescent in the solid-state and in frozen solution. All of these complexes were characterized by ¹H, ¹³C NMR, electronic absorption and emission spectroscopy and elemental analysis.     

Synthesis of (adamantylimido)vanadium(V)-alkyl complexes containing aryloxo ligands and their use as the catalyst precursors for ring-opening metathesis polymerization of norbornene, and ring-opening polymerization of tetrahydrofuran

Various (adamantylimido)vanadium(V) dialkyl complexes containing aryloxo ligands, V(NAd)(CH₂SiMe₃)₂(OAr) [Ad = 1-adamantyl (1); Ar = Ph (a), 4-FC₆H₄ (b), 2,6-F₂C₆H₃ (c), 2,6-Me₂C₆H₃ (d), C₆F₅ (e)], have been prepared and identified. These complexes were employed as the catalyst precursors for ring-opening metathesis polymerization (ROMP) of norbornene (NBE) in the presence of PMe₃ at 80 °C. The activity was strongly affected by the aryloxo substituent and increased in the order: C₆H₅ < 4-FC₆H₄ < 2,6-Me₂C₆H₃ << 2,6-F₂C₆H₃, C₆F₅. The same trend was observed in the ROMPs by the arylimido-aryloxo analogues, V(NAr′)(CH₂SiMe₃)₂(OAr) (2a-e; Ar′ = 2,6-Me₂C₆H₃), under the same conditions, and the activities by the arylimido analogues were generally higher than the adamantylimido analogues in most case. The (imido)vanadium(V) complexes containing O-2,6-F₂C₆H₃ (1,2c) or OC₆F₅ (1,2e) exhibited high catalytic activities, and these results strongly suggest that electronic as well as steric factors play a role. Living ring-opening polymerization of THF proceeded in the presence of V(NAd) (CH₂SiMe₃)(OAr)₂ (Ar = 2,6-Me₂C₆H₃, C₆F₅) and [Ph₃C][B(C₆F₅)₄], affording high molecular weight polymers with narrow molecular weight distributions (ex. M_n = 2.11 × 10⁵, M_w/M_n = 1.18).     

Synthesis and structure of mono- and dinuclear cyclopentadienyl–indenyl complexes of iron(II) and further reactions to mixed tri- and tetranuclear iron–cobalt complexes

The reaction of a mixture of sodium cyclopentadienide and the monolithium salt or dilithium salt of 2,2-bis(indenyl)propane with FeCl₂ leads to the mononuclear complex [(η⁵-C₅H₅)Fe(η⁵-ind-C(CH₃)₂-ind)] (ind = 1-indenyl) (1) and the dinuclear complex [{(η⁵-C₅H₅)Fe(η⁵-ind)}₂C(CH₃)₂] (2), respectively. [(η⁵-Me₅C₅)Fe(tmeda)Cl] reacts with dilithium 1,1′-biindenyl under formation of [{(η⁵-Me₅C₅)Fe}₂(μ-η⁵:η⁵-1,1′-biind)] (4). Due to the annelated arene rings of the η⁵-indenyl ligands, 2 and 4 may act as 4-electron donor ligands, as exemplified by the reaction with the triple-decker complex [{(η⁵-Me₅C₅)Co}₂(μ-η⁶:η⁶-toluene)], which afforded the tetranuclear dimer of triple-decker complexes [{(η⁵-C₅H₅)Fe(η⁵-Me₅C₅)Co(μ-η⁵:η⁴-1-ind)}₂C(CH₃)₂] (3) and the trinuclear complex [{(η⁵-Me₅C₅)Fe}₂(η⁵-Me₅C₅)Co(μ₃-η⁵:η⁴:η⁵-1,1′-biind)] · Et₂O (5 · Et₂O) by replacement of the central toluene deck, respectively. The [(η⁵-Me₅C₅)Co] fragments of 3 and 5 are bonded via the six-membered rings of the indenyl ligands in a η⁴-fashion. Caused by the coordination to the Co atoms the six-membered rings lose their planarity and adopt a butterfly structure. The coordination geometry of the Fe atoms is similar in all five complexes. Each Fe atom is coordinated by the C atoms of one of the five-membered rings of the indenyl ligands in a slightly distorted η⁵ manner (η³ + η²-coordination) and by a cyclopentadienyl ligand in a regular η⁵-fashion. The structures of 3 and 5 represent the first examples of slipped triple-decker complexes which comprise indenyl ligands in a μ-η⁵:η⁴ coordination mode.     

Displacement,reduction, and ligand redistribution reactivity of the cationic mono-C5Me5 Ln2+ complexes (C5Me5)Ln(BPh4) (Ln = Sm,Yb)

The reactivity of the mono(pentamethylcyclopentadienyl) divalent lanthanide tetraphenylborate complexes, (C₅Me₅)Ln(BPh₄) (Ln = Sm, 1; Yb, 2), was investigated to determine how Ln²⁺ and (BPh₄)^1? reactivity would combine in these species. The (BPh₄)^1? ligand in (C₅Me₅)Yb(BPh₄) can be displaced with KN(SiMe₃)₂ to form the heteroleptic divalent dimer, {(C₅Me₅)Yb[μ-N(SiMe₃)₂]}₂ (3). Both 1 and 2 reduce phenazine to give the bis(pentamethylcyclopentadienyl) ligand redistribution products, [(C₅Me₅)₂Ln]₂(μ-C₁₂H₈N₂). 2,2-Bipyridine is reduced by 1 to yield the ligand redistribution product, (C₅Me₅)₂Sm(C₁₀H₈N₂) (4), while 2 does not react with bipyridine. Tert-butyl chloride is reduced by 1 to form the trimetallic pentachloride complex [{(C₅Me₅)(THF)Sm}₃(μ-Cl)₅][BPh₄] (6), in a reaction that appears to use the reductive capacity of both Sm²⁺ and (BPh₄)^1?.     

Dinuclear ruthenium(I) complexes of the type [Ru2(CO)4L2] with carboxylate or 2-pyridonate ligands: Evaluation as catalysts for olefin cyclopropanation with diazoacetates

Dinuclear ruthenium(I,I) carboxylate complexes [Ru₂(CO)₄(μ-OOCR)₂]_n (R = CH₃ (1a), C₃H₇ (1b), H (1c), CF₃ (1d)) and 2-pyridonate complex [Ru₂(CO)₄(μ-2-pyridonate)₂]_n (3) catalyze efficiently the cyclopropanation of alkenes with methyl diazoacetate. High yields are obtained with terminal nucleophilic alkenes (styrene, ethyl vinyl ether, α-methylstyrene), medium yields with 1-hexene, cyclohexene, 4,5-dihydrofuran and 2-methyl-2-butene. The E-selectivity of the cyclopropanes obtained from the monosubstituted alkenes and the cycloalkenes decreases in the order 1b > 1a > 1d > 1c. The cyclopropanation of 2-methyl-2-butene is highly syn-selective. Several complexes of the type [Ru₂(CO)₄(μ-L¹)₂]₂ (4) and (5), [Ru₂(CO)₄(μ-L¹)₂L²] (L² = CH₃OH, PPh₃) (6)–(9) and [Ru₂(CO)₄(CH₃CN)₂(μ-L¹)₂] (10) and (11), where L¹ is a 6-chloro- or 6-bromo-2-pyridonate ligand, are also efficient catalysts. Compared with catalyst 3, a halogen substituent at the pyridonate ligand affects the diastereoselectivity of cyclopropanation only slightly.     

Synthesis,structure and magnetic properties of {Mn5(OC(O)CH3)6(OC(O)C6H5)4}∞

The ligand exchange reaction between Mn(OC(O)CH₃)₂ and benzoic acid under solvothermal conditions in toluene at 110 °C yields colorless crystals of {Mn₅(OC(O)CH₃)₆(OC(O)C₆H₅)₄}_∞ (1). The asymmetric unit of this complex is Mn_2.5(OC(O)CH₃)₃(OC(O)C₆H₅)₂ with each of the three different Mn(II) atoms in 6-fold coordination and one of the benzoate ligands exhibiting the rare μ₃-symmetric bridging mode (O–Mn–O angle = 57°). The structure consists of edge-shared Mn₁₂ loops arranged in a honeycomb-like 2D sheet with the acetate ligands displaced slightly out of the plane. The sheets are spaced at 12 Å and linked into a 3D network via weak intersheet interactions. Magnetic susceptibility characterization of 1 indicates antiferromagnetic exchange with a Weiss constant of −165 K and a transition toward ferromagnetic exchange below 10 K corroborated with a finite imaginary component in the variable temperature susceptibility data.     

Mixed ligands supported yttrium alkyl complexes:: Synthesis, characterization and catalysis toward lactide polymerization

Treatment of yttrium tris(alkyl)s, Y(CH₂SiMe₃)₃(THF)₂, by equimolar H(C₅Me₄)SiMe₃(HCp′) and indene (Ind-H) afforded (η⁵-Cp′)Y(CH₂SiMe₃)₂(THF) (1) and (η⁵-Ind)Y(CH₂SiMe₃)₂(THF) (2) via alkane elimination, respectively. Complex 1 reacted with methoxyamino phenols, 4,6-(CH₃)₂-2-[(MeOCH₂CH₂)₂-NCH₂]-C₆H₂-OH (HL¹) and 4,6-(CMe₃)₂-2-[(MeOCH₂CH₂)₂-NCH₂]-C₆H₂-OH (HL²) gave mixed ligands supported alkyl complexes [(η⁵-Cp′)(L)]Y(CH₂SiMe₃) (3: L = L¹; 4: L = L²). Whilst, complex 2 was treated with HL² to yield [(η⁵-Ind)(L²)]Y(CH₂SiMe₃) (5). The molecular structures of 3 and 5 were confirmed by X-ray diffraction to be mono(alkyl)s of THF-free, adopting pyramidal and tetragonal-bipyramidal geometry, respectively. Complexes 3 and 5 were high active initiators for the ring-opening polymerization of l-lactide to give isotactic polylactide with high molecular weight and narrow to moderate polydispersity.     

Synthesis,structure, spectroscopy and redox energetics of a series of uranium(IV) mixed-ligand metallocene complexes

A series of uranium(IV) mixed-ligand amide–halide/pseudohalide complexes (C₅Me₅)₂U[N(SiMe₃)₂](X) (X = F (1), Cl (2), Br (3), I (4), N₃ (5), NCO (6)), (C₅Me₅)₂U(NPh₂)(X) (X = Cl (7), N₃ (8)), and (C₅Me₅)₂U[N(Ph)(SiMe₃)](X) (X = Cl (9), N₃ (10)) have been prepared by one electron oxidation of the corresponding uranium(III) amide precursors using either copper halides, silver isocyanate, or triphenylphosphine gold(I)azide. Agostic U?H–C interactions and η³-(N,C,C′) coordination are observed for these complexes in both the solid-state and solution. There is a linear correlation between the chemical shift values of the C₅Me₅ ligand protons in the ¹H NMR spectra and the U^IV/U^III reduction potentials of the (C₅Me₅)₂U[N(SiMe₃)₂](X) complexes, suggesting that there is a common origin, that is overall σ-/π-donation from the ancillary (X) ligand to the metal, contributing to both observables. Optical spectroscopy of the series of complexes 1–6 is dominated by the (C₅Me₅)₂U[N(SiMe₃)₂] core, with small variations derived from the identity of the halide/pseudohalide. The considerable π-donating ability of the fluoride ligand is reflected in both the electrochemistry and UV-visible-NIR spectroscopic behavior of the fluoride complex (C₅Me₅)₂U[N(SiMe₃)₂](F) (1). The syntheses of the new trivalent uranium amide complex, (C₅Me₅)₂U[N(Ph)(SiMe₃)](THF), and the two new weakly-coordinating electrolytes, [Pr₄N][B{3,5-(CF₃)₂C₆H₃}₄] and [Pr₄N][B(C₆F₅)₄], are also reported.     

Synthesis and properties of iron (II) quinoline-2-carboxylates,crystal structure of trans-diaquabis(quinoline-2-carboxylato)iron (II) bis(dichloromethane) solvate

Two mononuclear iron complexes with the quinoline-2-carboxylate ion (quin-2-c ion) have been obtained by the reaction of iron powder with quinoline-2-carboxylic acid in dichloromethane. The compounds [Fe(quin-2-c)₂] (1), [Fe(quin-2-c)₂(H₂O)₂] · 2CH₂Cl₂ (2) and [Fe(quin-2-c)₂(H₂O)₂] · 2EtOH · 2H₂O (3) have been investigated by IR and UV–Vis spectroscopy, magnetic susceptibility and field-dependent magnetization measurements. The structure of 2 has been characterised by X-ray diffraction. The 2D bilayered frameworks of 2 and 3 are constructed by extensive hydrogen bonding interactions between water and the organic ligand coordinated to iron (II). The magnetic properties of 2 and 3 were interpreted on the basis of a spin Hamiltonian that included axial and rhombic crystal field components. The weak antiferromagnetic (2) and ferromagnetic (3) interactions are evident in the low temperature data and possibly occur via strong hydrogen bonds.