Oxygen assisted deposition of Sr2FeMoO6 thin films on SrTiO3(1 0 0)

Epitaxial thin films of Sr₂FeMoO₆ (SFMO) were prepared by pulsed laser deposition on SrTiO₃(1 0 0) substrate. Thin films have been grown under different gas environments and they were structurally characterised by XRD. In contrast to previous reports, deposition carried out in the presence of a small amount of O₂ with Ar yields high-quality SFMO films with a saturation magnetic moment of 3.8 μ_B. These SFMO films were strained in such a way that they were elongated along the c-axis and compressed in the ab-axes directions. The large low-field magnetoresistance seen in these films has been attributed to the tunneling across the antisite boundaries.     

Colossal magnetoresistance effect in epitaxially grown La2/3Ca1/3MnO3 perovskite-like manganite thin films

We report in this work, study on colossal magnetoresistance (CMR) effect in epitaxial La_2/3Ca_1/3 MnO₃ thin films grown on SrTiO₃ (0 0 1) substrates by pulsed laser deposition (PLD) technique. The films were grown on as-received SrTiO₃ substrates and on SrTiO₃ substrates prepared by HF etching (Koster et al., Appl. Phys. Lett. 73 (1998) 2920; V. Leca et al., Wet etching methods for perovskite substrates, University of Twente, MESA+ Research Institute, Low Temperature Division). Two of the samples were annealed in different conditions to investigate the films heat treatment effect on electric and magnetic properties. Electrical resistance was done using the four-probe method at temperatures in the range of 2–375 K without a magnetic field and in an external field of 5 T applied in the film plane. Resistance-magnetic field (R vs. H) at 77 K for the two annealed samples was done in a 5 T sweep magnetic field. The surface morphology and structural information of the films were obtained using atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. Secondary ion mass spectroscopy (SIMS) analysis was performed on the annealed samples to investigate any possible chemical reaction between La_2/3Ca_1/3MnO₃ thin films and SrTiO₃ substrate.     

In situ RHEED monitor of the growth of epitaxial anatase TiO2 thin films

Epitaxial anatase TiO₂ thin films were successfully grown on (0 0 1) SrTiO₃ substrates by the laser molecular-beam epitaxy (laser-MBE) method. The whole growth process is monitored by in situ reflection high-energy electron diffraction (RHEED). RHEED monitoring shows a transition from a streaky pattern to a spot pattern during deposition, indicating different growth modes of TiO₂ film. The RHEED patterns are in consistent with the RHEED intensity oscillation results. The atomic force microscopy (AFM) and X-ray diffraction (XRD) investigation show that the thin films have single crystalline orientation with roughness less than three unit cells.     

Magnetic properties of high quality superconducting laser ablated thin films

We present experimental results obtained forRBa₂Cu₃O_7 − x(R = Y,Er) expitaxial thin films obtained through pulsed laser deposition (PLD) and grown on yttria stabilized zirconia (YSZ) and SrTiO₃(STO) substrates. The films have been deposited by using low deposition rates (f = 4 Hz) and with control of the film surface temperature rather than that of the sample holder leading to a high quality of the epitaxy.     

Enhanced superconducting properties in epitaxial FeSe thin films with self-assembled Fe3O4 nanoparticles

In this paper we report epitaxial tetragonal iron selenide thin films grown on single crystal SrTiO₃ (STO) (0 0 1) and MgO (0 0 1) substrates by a pulsed laser deposition (PLD) technique. Deposition temperature and annealing process are found to be critical for achieving the tetragonal phase and the optimum superconducting properties of the films. The critical transition temperature of the thin films ranges from 2 K to 11.5 K depending on the deposition temperature and annealing condition. The samples with higher critical transition temperatures show better film crystallinity along with self-assembled Fe₃O₄ nanoparticles (～15 nm in average particle size) in the films according to both X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis. Besides the better crystallinity achieved in the films, the formation of Fe₃O₄ nanoparticles could assist the formation of the tetragonal FeSe phase and thus lead to the enhanced superconducting properties.     

Growth of Sr2CrReO6 epitaxial thin films by pulsed laser deposition

We report the growth, structural, magnetic, and electrical transport properties of epitaxial Sr₂CrReO₆ thin films. We have succeeded in depositing films with a high crystallinity and a relatively large cationic order in a narrow window of growth parameters. The epitaxy relationship is Sr₂CrReO₆ (SCRO) (0 0 1) [1 0 0]∥SrTiO₃ (STO) (0 0 1) [1 1 0] as determined by high-resolution X-ray diffraction and scanning transmission electron microscopy (STEM). Typical values of saturation magnetization of M_S (300 K)=1 μ_B/f.u. and ρ (300 K)=2.8 mΩ cm have been obtained in good agreement with previous published results in sputtered epitaxial thin films. We estimate that the antisite defects concentration in our thin films is of the order of 14%, and the measured Curie temperature is T_C=481(2) K. We believe these materials be of interest as electrodes in spintronic devices.     

Electronic charge transfer between Au nano-particles and TiO2-terminated SrTiO3(0 0 1) substrate

The interaction between Au nano-particles and oxide supports is recently discussed in terms of the catalytic activities. This paper reports the electronic charge transfer between Au nano-particles and TiO₂-terminated SrTiO₃(0 0 1) substrate, which is compared with that for stoichiometric(S)-, pseudo-stoichiometric(S¹)- and reduced(R)-TiO₂(1 1 0) supports. We observed the photoelectron spectra of Au 4f, O 2s, Ti 3p, and Sr 4p lines and also measured the work functions for Au/oxides supports using synchrotron-radiation light. As the results, all the O 2s, Ti 3p, and Sr 4p lines for Au/SrTiO₃(0 0 1) show lower binding energy shifts in a quite same manner and abrupt increase in the work function is seen in an initial stage. This clearly evidences an electronic charge transfer from the substrate to Au probably due to a much larger work function of Au than SrTiO₃(0 0 1), which leads to an upward band bending (0.3 eV) just like a Schottky contact. Electronic charge transfers also take place at Au/S- and Au/S¹-TiO₂(1 1 0) and Au/R-TiO₂(1 1 0) interfaces, where electrons are transferred from Au to S- and S¹-TiO₂ and from R-TiO₂ to Au, as predicted by ab initio calculations.     

Measurement of optical and surface properties of PLZT thin films

Lanthanum-modified lead zirconate titanate (Pb_0.93La_0.07(Zr_0.3Ti_0.7)_0.93O₃, PLZT7/30/70) thin films with and without a seeding layer of PbTiO₃ (PT) were successfully deposited on indium-doped tin oxide (ITO) coated glass substrate via spin coating in conjunction with a sol–gel process, and a top transparent conducting thin film of SnO₂ was also prepared in the same way. The thicknesses of PLZT and PT layers are 0.5 μm and 24 nm, respectively. The retardance of PLZT film was measured by a new heterodyne interferometer and enhanced by application of a seeding layer of PT. The Pockels linear electro-optical coefficient of PLZT film with a PT layer was determined to be 3.17 × 10^?9 m/V when the refractive index is considered as 2.505, which is one order larger than 1.4 × 10^?10 m/V for PLZT12/40/60 doped with Dy reported in the literature. The root-mean-square (rms) roughness of PLZT thin film with a PT layer (R_rms = 6.867 nm) was larger than that of PLZT film (R_rms = 0.799 nm). From the comparisons, the average transmittance of PLZT film with a PT seeding layer was 77.01%, which was a little smaller than that of PLZT film (around 80.75%). Experimental results imply that the PT seeding layer plays a key role in the increase of retardance value, leading to a higher Pockels coefficient.     

Oxygen adatoms at SrTiO3(0 0 1): A density-functional theory study

We present a density-functional theory study addressing the energetics and electronic structure properties of isolated oxygen adatoms at the SrTiO₃(0 0 1) surface. Together with a surface lattice oxygen atom, the adsorbate is found to form a peroxide-type molecular species. This gives rise to a non-trivial topology of the potential energy surface for lateral adatom motion, with the most stable adsorption site not corresponding to the one expected from a continuation of the perovskite lattice. With computed modest diffusion barriers below 1 eV, it is rather the overall too weak binding at both regular SrTiO₃(0 0 1) terminations that could be a critical factor for oxide film growth applications.     

Thickness dependence of the soft ferroelectric mode in SrTiO3 thin films deposited on MgO

We have measured the complex dielectric constants of SrTiO₃ thin films deposited on MgO substrate, by using the broadband terahertz time-domain spectroscopy. The dielectric dispersion of SrTiO₃ thin films with thickness of 1046, 460 and 55 nm has been observed in the frequency range from 0.1 to 8 THz. The dispersion mainly consists of the TO1 ferroelectric soft mode with a slight absorption of the TO2 phonon mode. From the analysis of the obtained dispersion, we found that the soft mode frequency hardens as the thickness of the film becomes thinner, and is extremely large compared with the bulk crystals. The damping of the soft mode is also larger than that of bulk SrTiO₃, which suggests the extrinsic nature of the broadening of the soft mode dispersion. In the thinnest film of 55 nm, even the shape of the dielectric dispersion changes, which may be related to integrated defects near the interface.     

Oscillation of surface in-plane lattice spacing during epitaxial growth of BaTiO3 and SrTiO3 on SrTiO3(1 0 0)

In-plane lattice spacing oscillation was observed as functions of surface coverage and growing film thickness by reflection high-energy electron diffraction during the growth of strained BaTiO₃ and unstrained SrTiO₃ epitaxial layers on SrTiO₃(1 0 0). For BaTiO₃/SrTiO₃, the oscillation continued until the critical thickness is reached, whereas for SrTiO₃/SrTiO₃, oscillation was observed only at the initial few monolayer growth. The origin of oscillations is discussed in relation to the non-tetragonal elastic distortion occurring at the free edges of 2D single monolayer islands. The amplitude of the oscillation strongly depended on the island size and density.     

Preparation and properties of Y1−xHoxBa2Cu3O7−δ thin films by TFA-MOD method

Y_1?xHo_xBa₂Cu₃O_7?δ (x = 0, 0.1, 0.2, 0.3, 0.4, 0.5) thin films were prepared on LaAlO₃ (0 0 1) substrates by trifluoroacetate metal organic deposition (TFA-MOD) without change of the processing parameters. The highest J_c was attributed to the sample of Y_0.6Ho_0.4Ba₂Cu₃O_7?δ thin film, whose critical current density is about 1.6 times as compared to that of YBa₂Cu₃O_7?δ thin film at 77 K and self field. The flux pinning type was not varied with Ho substitution and can be attributed to δl pinning model, which is attributed to the close ionic radius between the Y³⁺ and Ho³⁺ ions. The improvement of J_c by Ho substitution without change of the processing parameters will provide an effective route to enhance the J_c of YBCO-based thin films using TFA-MOD method.     

Self-assembly of well-ordered and highly uniform nanoripples induced by focused ion beam

Well-ordered and highly uniform nanoripple structures on the surface of single crystal LaAlO₃ (1 0 0), SrTiO₃ (1 0 0) and Al₂O₃ (0 0 0 1) were formed via self-assembly (not by beam writing) by focused ion-beam bombardment. The morphology and topography of nanoripple structures were characterized using in-situ focused ion-beam/scanning electron microscope, as well as ex-situ atomic force microscopy. Under off-normal bombardment without sample rotation, the characteristic wavelength of nanoripples varying from 248 to 395 nm on the LaAlO₃ (1 0 0) surface can be obtained by changing ion fluence and incident angle. When all sputtering parameters except the ion fluence are constant, the wavelength of nanoripples is increased with the enhanced ion fluence. These results demonstrate the potential application of using ion sputtering method for fabricating the well-ordered and highly uniform nanoripples which can be used in nanodevices.     

Preparation of solution-based YBCO films with BaSnO3 particles

The YBCO films with BaSnO₃ (BSO) particles were prepared on LAO (0 0 1) substrates by metal organic deposition using trifluoroacetates (TFA-MOD) via introducing SnCl₄ powders into the YBCO precursor solution. It was found that with the increase of the SnCl₄ contents, the slower decomposition and higher temperature for nucleation during the reaction were requested compared to that of pure YBCO film. The YBCO films with different contents of Sn with dense surface and well c-alignment were obtained under optimized heat treatment, and the BaSnO₃ phases were detected by XRD analysis. Litter effect of BSO particles on the T_c and J_c values of YBCO films was found. All YBCO films with BSO particles had T_c values over 90 K and J_c values over 1 MA/cm². A significant enhancement of J_c was observed for YBCO films with BSO particles compared to that of pure YBCO film by the field dependence of J_c values. The best property was obtained for YBCO film with 6 mol.% Sn at 77 K under magnetic field. The results showed that the J_c value of YBCO film with 6 mol.% Sn was enhanced by a factor of 2 in 2 T, and over a factor of 10 beyond 4 T compared to that of pure YBCO film.     

Effective demagnetizing factors in ferromagnetic resonance equations

A simple method of deriving effective demagnetizing factors (N_x^e,N_y^e) for the use of Kittel's ferromagnetic resonance formula is reported. The effective demagnetizing factors are expressed by an anisotropy energy (G) and a static field direction (θ,φ). By this derivation method, the resonance equations of thin films having a uniaxial or a four-fold anisotropy are obtained when a static field is rotated in the film plane. Six arrangements are calculated: (1) perpendicular anisotropy, (2) in-plane anisotropy, (3) cubic-crystal (0 0 1) face, (4) cubic-crystal (0 1 1) face, (5) cubic-crystal (1 1 1) face, and (6) oblique anisotropy films.     

Use of film thickness and Cu additive to improve (0 0 1) texture in MgO/FePtCu(C) bilayers

A multilayer structure has been proposed that demonstrates improved (0 0 1) texture for FePt-based L1₀ perpendicular media. Achieving a strong perpendicular magnetic anisotropy requires aligning the L1₀ crystallographic c-axis along the film normal. The ordered L1₀ FePt structure is tetragonal with a c/a ratio close to 0.965. This makes discriminating between the three crystallographic variants ([1 0 0], [0 1 0], and the desired [0 0 1]) difficult. Alloying FePt with Cu to reduce the c/a ratio and using a multilayer approach to keep the magnetic layers thin results in a structure with an adjustable M_rt and a strong (0 0 1) texture (rocking curve widths around 2°). This is a remarkable improvement in texture from pure FePt multilayered films or monolithic FePt(X) films. The proposed [MgO(2 nm)/Fe_50−xPt₅₀Cu_x(5 nm)]_×n structure limits grain size in the vertical (perpendicular) direction albeit not in the plane of the film. Carbon can be added to the FePtCu layer to reduce the grain size with minimal degradation of the (0 0 1) orientation.     

Densely mapping the phase diagram of cuprate superconductors using a spatial composition spread approach

A novel spatial composition spread approach was used successfully to deposit a 52-member library of La_2?xSr_xCuO₄ (0 ? x ? 0.18) using magnetron sputtering combined with physical masking techniques. Two homemade targets of La₂CuO₄ and La_1.82Sr_0.18CuO₄ were sputtered at a power of 41 W RF and 42 W DC, respectively, in a process gas of 15 mTorr argon. The libraries were sputtered onto LaSrAlO₄ (0 0 1), SrTiO₃ (1 0 0) and MgO (1 0 0) substrates through a 52-slot shadow mask for which a ?20 V substrate bias was applied to prevent resputtering. The resulting amorphous films were post-annealed (800 °C for 1 h then at 950 °C for 2 h) in a tube sealed with oxygen gas. Wavelength Dispersive Spectroscopy (WDS) analysis revealed the expected linear variation of Sr content from 0 to 0.18 with an approximate change of 0.003 per library member. Transport measurements revealed superconducting transitions as well as changes in the quasiparticle scattering rate. These transitions and scattering rate changes were mapped to produce the T-hole concentration phase diagram.     

Structural and electrochemical characterization of mesoporous thin films of Nb2xV2 − 2xO5 upon lithium intercalation

Nb_2xV_2 ? 2xO₅ (0 ≤ x ≤ 1) powders were prepared by a synthetic route based on the inorganic polymerization of alkoxy-choride precursors and characterized by a combination of X-ray diffraction, ⁵¹V and ⁹³Nb NMR and Raman spectroscopy. Amorphous mesoporous thin films of similar compositions were successfully prepared by a modified Evaporation Induced Self Assembly method using polystyrene-b-polyethyleneoxide diblock copolymer as structuring agent. The electrochemical properties of the mesoporous films upon lithium insertion–deinsertion are investigated by cyclic voltammetry. This study highlights the advantages of such nanoarchitecture in terms of increased capacity to insert lithium.     

Effective utilization of spray pyrolyzed CeO2 as optically passive counter electrode for enhancing optical modulation of WO3

Nanocrystalline cerium oxide (CeO₂) thin films were deposited onto the fluorine doped tin oxide coated glass substrates using methanolic solution of cerium nitrate hexahydrate precursor by a simple spray pyrolysis technique. Thermal analysis of the precursor salt showed the onset of crystallization of CeO₂ at 300 °C. Therefore, cerium dioxide thin films were prepared at different deposition temperatures from 300 to 450 °C. Films were transparent (T ~ 80%), polycrystalline with cubic fluorite crystal structure and having band gap energy (Eg) in the range of 3.04–3.6 eV. The different morphological features of the film obtained at various deposition temperatures had pronounced effect on the ion storage capacity (ISC) and electrochemical stability. The larger film thickness coupled with adequate degree of porosity of CeO₂ films prepared at 400 °C showed higher ion storage capacity of 20.6 mC cm^? 2 in 0.5 M LiClO₄ + PC electrolyte. Such films were also electrochemically more stable than the other studied samples. The Ce⁴⁺/Ce³⁺ intervalancy charge transfer mechanism during the bleaching–lithiation of CeO₂ film was directly evidenced from X-ray photoelectron spectroscopy. The optically passive behavior of the CeO₂ film (prepared at 400 °C) is affirmed by its negligible transmission modulation upon Li⁺ ion insertion/extraction, irrespective of the extent of Li⁺ ion intercalation. The coloration efficiency of spray deposited tungsten oxide (WO₃) thin film is found to enhance from 47 to 53 cm² C^? 1 when CeO₂ is coupled with WO₃ as a counter electrode in electrochromic device. Hence, CeO₂ can be a good candidate for optically passive counter electrode as an ion storage layer.