Non-aqueous synthetic methodology for TiW(5) polyoxometalates: protonolysis of [(MeO)TiW(5)O(18)](3-) with alcohols, water and phenols

The tetra-n-butylammonium (TBA) salt of [(MeO)TiW(5)O(18)](3-) 1 was reacted with alcohols ROH to give primary, secondary and tertiary alkoxide derivatives [(RO)TiW(5)O(18)](3-) (R = Et 2, (i)Pr 3 and (t)Bu 4), whilst hydrolysis afforded [(mu-O)(TiW(5)O(18))(2)](6-) 5 rather than the hydroxo derivative (R = H). In reactions with (i)PrOH and (t)BuOH, impurity peaks observed at 1015 and 1020 ppm in the (17)O NMR spectra indicate alkoxide degradation and Ti=O bond formation via reactions analogous to those occurring at the surfaces of solid heteropolyacids. Aryloxides [(ArO)TiW(5)O(18)](3-) were prepared by reacting 1 with phenols ArOH (Ar = C(6)H(5) 6, C(6)H(4)Me-4 7, C(6)H(4)(t)Bu-4 8, C(6)H(4)OH-4 9, C(6)H(4)OH-3 10, C(6)H(3)(OH)(2)-3,5 11 and C(6)H(4)CHO-2 13). TiW(5)O(18) units were linked by reacting 1 with 9 to give [(mu-1,4-OC(6)H(4)O)(TiW(5)O(18))(2)](6-) 12. (17)O and (183)W NMR spectra are reported and X-ray crystal structures were obtained for TBA salts of anions 3-10 and 13, which showed that the titanium is six-coordinate in all cases. Reactions were monitored by (1)H NMR, including a 2D-EXSY study of methoxo exchange, and the slow rates observed are probably associated with the reluctance of titanium in these anions to achieve seven-coordination.     

Nucleophilic reactivity and oxo/sulfido substitution reactions of MVIO3 Groups (M = Mo, W)

The nucleophilic reactivity of oxo ligands in the groups M(VI)O(3) in the trigonal complexes [(Me(3)tacn)MO(3)] (M = Mo (1), W (10)) and [(Bu(t)(3)tach)MO(3)] (M = Mo (5), W (14)) has been investigated. Complexes 1/10 can be alkylated with MeOTf to give [(Me(3)tacn)MO(2)(OMe)](1+) (2/11), silylated with Pr(i)(3)SiOTf to form [(Me(3)tacn)MO(2)(OSiPr(i)(3))](+) (3/12), and protonated with HOTf to yield [(Me(3)tacn)MoO(2)(OH)](+) (4). Similarly, complexes 5/14 can be silylated to [(Bu(t)(3)tach)MO(2)(OSiPr(i)(3))](+) (6/15) and protonated to [(Bu(t)(3)tach)MO(2)(OH)](+) (7/16). Products were isolated as triflate salts in yields exceeding 70%. When excess acid was used, the dinuclear mu-oxo species [(Bu(t)(3)tach)(2)M(2)O(5)](2+) (8/17) were obtained. X-ray structures are reported for 2-4, 6-8, 12, and 15-17. All mononuclear complexes have dominant trigonal symmetry with a rhombic distortion owing to a M[bond]OR bond (R = Me, SiPr(i)(3), H), which is longer than M[double bond]O oxo interactions; the latter exert a substantial trans influence on M[bond]N bond lengths. Oxo ligands in 5/14 undergo replacement with sulfide. Lawesson's reagent effects formation of [(Bu(t)(3)tach)MS(3)] (9/18), 14 with excess B(2)S(3) yields incompletely substituted [(Bu(t)(3)tach)WOS(2)] (20), and 5 with excess B(2)S(3) yields [(Bu(t)(3)tach)Mo(IV)O(S(4))] (19). The structures of 9, 19, and 20 are reported. Precedents for M(VI)S(3) groups in five- and six-coordinate molecules are limited. This investigation is the first detailed study of the behavior of M(VI)O(3) groups in nucleophilic and oxo/sulfido substitution reactions and should be useful in synthetic approaches to the active sites of the xanthine oxidase enzyme family and of certain tungstoenzymes. (Bu(t)(3)tach = 1,3,5-tri-tert-butyl-1,3,5-triazacyclohexane, Me(3)tacn = 1,4,7-trimethyl-1,4,7-triazacyclonane; OTf = triflate).     

1,4-dioxobenzene compounds of gallium: reversible binding of pyridines to [[((t)Bu)(2)Ga](2)(mu-OC(6)H(4)O)](n) in the solid state

The gallium aryloxide polymer, [[((t)Bu)(2)Ga](2)(mu-OC(6)H(4)O)](n)(1) is synthesized by the addition of Ga((t)()Bu)(3) with hydroquinone in a noncoordinating solvent, and reacts with pyridines to yield the yellow compound [((t)()Bu)(2)Ga(L)](2)(mu-OC(6)H(4)O) [L = py (2), 4-Mepy (3), and 3,5-Me(2)py (4)] via cleavage of the Ga(2)O(2) dimeric core. The analogous formation of Ga((t)()Bu)(2)(OPh)(py) (5) occurs by dissolution of [((t)Bu)(2)Ga(mu-OPh)](2) in pyridine. In solution, 2-4 undergo dissociation of one of the pyridine ligands to yield [((t)()Bu)(2)Ga(L)(mu-OC(6)H(4)O)Ga((t)Bu)(2)](2), for which the DeltaH and DeltaS have been determined. Thermolysis of compounds 2-4 in the solid-state results in the loss of the Lewis base and the formation of 1. The reaction of 1 or [((t)Bu)(2)Ga(mu-OPh)](2) with the vapor of the appropriate ligand results in the solid state formation of 2-4 or 5, respectively. The deltaH and deltaS for both ligand dissociation and association for the solid-vapor reactions have been determined. The interconversion of 1 into 2-4, as well as [((t)Bu)(2)Ga(mu-OPh)](2) into 5, and their reverse reactions, have been followed by (13)C CPMAS NMR spectroscopy, TG/DTA, SEM, EDX, and powder XRD. Insight into this solid-state polycondensation polymerization reaction may be gained from the single-crystal X-ray crystallographic packing diagrams of 2-5. The crystal packing for compounds 2, 3, and 5 involve a head-to-head arrangement that is maintained through repeated ligand dissociation and association cycles. In contrast, when compound 4 is crystallized from solution a head-to-tail packing arrangement is formed, but during reintroduction of 3,5-Me(2)py in the solid state-vapor reaction of compound 1, a head-to-head polymorph is postulated to account for the alteration in the deltaH of subsequent ligand dissociation reactions. Thus, the deltaH for the condensation polymerization reaction is dependent on the crystal packing; however, the subsequent reversibility of the reaction is dependent on the polymorph.     

Insights into the metathesis reaction involving M-M,C-C,and M-C triple bonds from computations employing density functional theory on model compounds M2(OH)6 and M2(SH)6, where M = Mo and W

Calculations employing density functional theory (Gaussian 98, B3LYP, LANL2DZ, 6-31G) have been undertaken to interrogate the factors influencing the metathesis reaction involving M-M, C-C, and M-C triple bonds for the model compounds M(2)(EH)(6), M(2)(EH)(6)(mu-C(2)H(2)), and [(HE)(3)M(tbd1;CH)](2), where M = Mo, W and E = O, S. Whereas in all cases the ethyne adducts are predicted to be enthalpically favored in the reactions between M(2)(EH)(6) compounds and ethyne, only when M = W and E = O is the alkylidyne product [(HO)(3)W(tbd1;CH)](2) predicted to be more stable than the alkyne adduct. For the reaction M(2)(EH)(6)(mu-C(2)H(2)) --> [(HE)(3)M(tbd1;CH)](2), the deltaG degrees values (kcal mol(-)(1)) are -6 (M = W, E = O), +5 (M = Mo, E = O), +18 (M = W, E = S), and +21 (M = Mo, E = S) and the free energies of activation are calculated to be deltaG() = +19 kcal mol(-)(1) (M = W, E = O) and +34 kcal mol(-)(1) (M = Mo, E = O), where the transition state involves an asymmetric bridged structure M(2)(OH)(4)(mu-OH)(2)(CH)(mu-CH) in which the C-C bond has broken; C.C = 1.89 and 1.98 A for W and Mo, respectively. These results are discussed in terms of the experimental observations of the reactions involving ethyne and the symmetrically substituted alkynes (RCCR, where R = Me, Et) with M(2)(O(t)()Bu)(6) and M(2)(O(t)()Bu)(2)(S(t)()Bu)(4) compounds, where M = Mo, W.     

An approach to the synthesis of polyoxometalate encapsulating different kinds of oxoanions as heteroions: bisphosphitopyrophosphatotriacontamolybdate [(HPO3)2(P2O7)Mo30O90]8-

A yellow [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion was prepared as a tetrapropylammonium (Pr(4)N(+)) salt from a 50 mM Mo(VI)-2 mM P(2)O(7)(4-)-4 mM HPO(3)(2-)-0.95 M HCl-60% (v/v) CH(3)CN system at ambient temperature. The (Pr(4)N)(8)[(HPO(3))(2)(P(2)O(7))Mo(30)O(90)] salt crystallized in the orthorhombic space group P(nma) (No. 62), with a = 30.827(2) A, b = 22.8060(15) A, c = 30.928(2) A, V = 21743(3) A(3), and Z = 4. The structure contained a (P(2)O(7))Mo(12)O(42) fragment derived from the removal of each corner-shared Mo(3)O(13) unit in a polar position from a [(P(2)O(7))Mo(18)O(54)](4-) structure, and each side of the (P(2)O(7))Mo(12)O(42) fragment was capped by a B-type (HPO(3))Mo(9)O(24) unit. The [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion was characterized by voltammetry and IR, UV-vis, and (31)P NMR spectroscopy. Unlike the Keggin and Dawson anions and the parent [(P(2)O(7))Mo(18)O(54)](4-) anion, the [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion exhibited two-electron redox waves in CH(3)CN with and without acid.     

Formation of N-I charge-transfer bonds and ion pairs in polyiodides with imidotellurium cations

[((t)BuNH)Te(mu-N(t)Bu)(2)Te(N(t))Bu)][OSO(2)CF(3)] (4a) is obtained in quantitative yields by the treatment of [((t)BuN)Te(mu-N(t)Bu)(2)Te(N(t)Bu)] (1) with HCF(3)SO(3). The reaction of 4a with LiI and iodine in the molar ratio 1:1:4.5 affords a product that, upon recrystallization from acetonitrile, was found to be a solid solution of [((t)BuNH)Te(mu-N(t)Bu)(2)Te(N(t)Bu)](2)I(20) (5a) and [((t)BuNH)Te(mu-N(t)Bu)(2)Te(NH(t)Bu)](2)I(18) (5b). Consequently, the crystal structure is disordered, containing 88.3(1)% of 5a.2MeCN and 11.7(1)% of 5b.2MeCN. The I(20) framework is involved in two symmetry-equivalent N-I-I-I-I fragments, two I(3)(-) ions, and three I(2) molecules that are linked together by I...I secondary bonding interactions. The bonding in the N-I-I-I-I fragment can be considered in terms of the lp(N) --> sigma*(I(2)) and pi(I(2)) --> sigma*(I(2)) charge-transfer interactions involving one [((t)BuNH)Te(mu-N(t)Bu)(2)Te(N(t)Bu)](+) cation and two I(2) units. The N-I bond length of 2.131(7) A, the I-I distances of 3.118(1), 3.095(2), and 2.788(2) A, and the angle I(2)-I(2) angle of 84.75(4) degrees are consistent with this bonding scheme. The I-I bond distances in the two symmetry-equivalent I(3)(-) ions are 3.113(1) and 2.792(2) A, and those in two crystallographically independent I(2) molecules are 2.736(2) and 2.743(1) A. The formal I(18)(4)(-) anion in 5b.2MeCN consists of four I(3)(-) anions and three I(2) molecules linked by I...I secondary bonds. One crystallographically independent I(3)(-) anion is connected to the [((t)BuNH)Te(mu-N(t)Bu)(2)Te(HN(t)Bu)](2+) cation by two hydrogen bonds [H...I = 2.823(5) and 2.983(5) A; N...I = 3.697(8) and 3.857(9) A]. The I(3)(-) anions and I(2) molecules in 5b show virtually identical bond parameters to those in 5a. The treatment of 1 with iodine and the reactions of its methylated derivatives, [((t)BuNMe)Te(mu-N(t)Bu)(2)Te(N(t)()Bu)][OSO(2)CF(3)] and [((t)BuNMe)Te(mu-N(t)Bu)(2)Te(MeN(t)Bu)][OSO(2)CF(3)](2), with LiI and iodine also afford highly moisture-sensitive polyiodides, either by the formation of N-I charge-transfer complexes or by ionic interactions. The crystal structures of the partially hydrolyzed products, [((t)BuIN)Te(mu-N(t))Bu)(2)Te(mu-O)](2)(I(3))(2) (3), [((t)BuMeN)Te(mu-N(t)Bu)(2)Te(mu-O)](2)(I(3))(2) (6), and 6.2MeCN, are also reported.     

Low-coordinate chromium siloxides: the "box" [Cr(mu-Cl)(mu-OSitBu3)]4, distorted trigonal [(tBu3SiO)3Cr][Na(benzene)] and [(tBu3SiO)3Cr][Na(dibenzo-18-c-6)], and trigonal (tBu3SiO)3Cr

Treatment of CrCl(2)(THF)(2) with NaOSi(t)Bu(3) afforded the tetrameric "box" [Cr(mu-Cl)(mu-OSi(t)Bu(3))](4) (1, X-ray). THF cleaved 1 to provide trans-(silox)ClCr(THF)(2) (2), whereas degradation of 1 with 4-picoline caused disproportionation and the generation of trans-Cl(2)Cr(4-pic)(2) and trans-(silox)(2)Cr(4-pic)(x) (n = 2, 3; 3, 3-4-pic). Chromous centers in 1 were antiferromagnetically coupled, and density functional calculations on the high-spin (multiplicity = 17) model [Cr(mu-Cl)(mu-OH)](4) (1') revealed that its singly occupied 3d orbitals spanned an energy range of approximately 2 eV. The addition of 8 equiv of Na(silox) to 1 yielded [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na.C(6)H(6) (4, Y shaped, angle OCrO(Na) = 91.28(7) degrees), and treatment of 4 with dibenzo-18-crown-6 produced [(silox)(3)Cr][Na(dibenzo-18-crown-6)] (5, angle OCrO = approximately 120 degrees, (120 + alpha) degrees, (120 - alpha) degrees). Calculations of [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na (4') and Cr(silox)(3)(-) (5') provided reasonable matches with the experimental geometries (X-ray). The trigonal chromic derivative (silox)(3)Cr (6) was synthesized from CrCl(3)(THF)(3) for structural and calculational comparisons to the chromous derivatives.     

Aluminium alkyl and aryloxide complexes of pyrazine and bipyridines: synthesis and structure

The reaction of AlMe(3) and [((t)Bu)(2)Al(micro-OPh)](2) with pyrazine (pyz), 4,4'-bipyridine (4-4'-bipy), 1,2-bis(4-pyridyl)ethane (bpetha) and 1,2-bis(4-pyridyl)ethylene (bpethe) yields (Me(3)Al)(2)(micro-pyz)(1), (Me(3)Al)(2)(micro-4,4'-bipy)(2), (Me(3)Al)(2)(micro-bpetha)(3), (Me(3)Al)(2)(micro-bipethe)(4), Al((t)Bu)(2)(OPh)(pyz)(5), [((t)Bu)(2)Al(OPh)](2)(micro-4,4-bipy)(6a), [((t)Bu)(2)Al(OPh)](2)(micro-bpetha)(7a), [((t)Bu)(2)Al(OPh)](2)(micro-bipethe)(8a). Compounds 1-4, 6a and 7a have been confirmed by X-ray crystallography. In solution compounds 1-4 undergo a rapid ligand-dissociation equilibrium resulting in a time-average spectrum in the (1)H NMR. In contrast, the solution equilibria for compounds 5-8a are sufficiently slow such that the mono-aluminium compounds may be observed by (1)H NMR spectroscopy: Al((t)Bu)(2)(OPh)(4,4-bipy)(6b), Al((t)Bu)(2)(OPh)(bpetha)(7b) and Al((t)Bu)(2)(OPh)(bpethe)(8b). The inability to isolate [((t)Bu)(2)Al(OPh)](2)(micro-pyz) and the relative stability of each complex is discussed with respect to the steric interactions across the bridging ligand (L) and the electronic effect on one Lewis acid-base interaction by the second Lewis acid-base interaction on the same ligand.     

Hydroxide-promoted core conversions of molybdenum-iron-sulfur edge-bridged double cubanes: oxygen-ligated topological PN clusters

The occurrence of a heteroatom X (C, N, or O) in the MoFe7S9X core of the iron-molybdenum cofactor of nitrogenase has encouraged synthetic attempts to prepare high-nuclearity M-Fe-S-X clusters containing such atoms. We have previously shown that reaction of the edge-bridged double cubane [(Tp)2Mo2Fe6S8(PEt3)4] (1) with nucleophiles HQ- affords the clusters [(Tp)2Mo2Fe6S8Q(QH)2](3-) (Q = S, Se) in which HQ- is a terminal ligand and Q(2-) is a mu2-bridging atom in the core. Reactions with OH- used as such or oxygen nucleophiles generated in acetonitrile from (Bu3Sn)2O or Me3SnOH and fluoride were examined. Reaction of 1 with Et4NOH in acetonitrile/water generates [(Tp)2Mo2Fe6S9(OH)2]3- (3), isolated as [(Tp)2Mo2Fe6S9(OH)(OC(=NH)Me)(H2O)](3-) and shown to have the [Mo2Fe6(mu2-S)2(mu3-S)6(mu6-S)] core topology very similar to the P(N) cluster of nitrogenase. The reaction system 1/Et4NOH in acetonitrile/methanol yields the P(N)-type cluster [(Tp)2Mo2Fe6S9(OMe)2(H2O)](3-) (5). The system 1/Me3SnOH/F- affords the oxo-bridged double P(N)-type cluster {[(Tp)2Mo2Fe6S9(mu2-O)]2}5- (7), convertible to the oxidized cluster {[(Tp)2Mo2Fe6S9(mu2-O)]2}4- (6), which is prepared independently from [(Tp)2Mo2Fe6S9F2(H2O)](3-)/(Bu3Sn)2O. In the preparations of 3-5 and 7, hydroxide liberates sulfide from 1 leading to the formation of P(N)-type clusters. Unlike reactions with HQ-, no oxygen atoms are integrated into the core structures of the products. However, the half-dimer composition [Mo2Fe6S9O] relates to the MoFe7S9 constitution of the putative native cluster with X = O. (Tp = hydrotris(pyrazolyl) borate(1-)).     

Silver(I)-ethynide clusters constructed with phosphonate-functionized polyoxovanadates

Two neutral silver(I)-phenylethynide clusters incorporating the [((t)BuPO(3))(4)V(4)O(8)](4-) unit as an integral shell component, namely {(NO(3))(2)@Ag(16)(C≡CPh)(4)[((t)BuPO(3))(4)V(4)O(8)](2)(DMF)(6)(NO(3))(2)}·DMF·H(2)O and {[(O(2))V(2)O(6)](3)@Ag(43)(C≡CPh)(19)[((t)BuPO(3))(4)V(4)O(8)](3)(DMF)(6)}·5DMF·2H(2)O, have been isolated and characterized by X-ray crystallography. The central cavities of the Ag(16) and Ag(43) clusters are occupied by two NO(3)(-) and three [(O(2))V(2)O(6)](4-) template anions, respectively.     

High-nuclearity sulfide-rich molybdenum[bond]iron[bond]sulfur clusters: reevaluation and extension

High-nuclearity Mo[bond]Fe[bond]S clusters are of interest as potential synthetic precursors to the MoFe(7)S(9) cofactor cluster of nitrogenase. In this context, the synthesis and properties of previously reported but sparsely described trinuclear [(edt)(2)M(2)FeS(6)](3-) (M = Mo (2), W (3)) and hexanuclear [(edt)(2)Mo(2)Fe(4)S(9)](4-) (4, edt = ethane-1,2-dithiolate; Zhang, Z.; et al. Kexue Tongbao 1987, 32, 1405) have been reexamined and extended. More accurate structures of 2-4 that confirm earlier findings have been determined. Detailed preparations (not previously available) are given for 2 and 3, whose structures exhibit the C(2) arrangement [[(edt)M(S)(mu(2)-S)(2)](2)Fe(III)](3-) with square pyramidal Mo(V) and tetrahedral Fe(III). Oxidation states follow from (57)Fe M?ssbauer parameters and an S = (3)/(2) ground state from the EPR spectrum. The assembly system 2/3FeCl(3)/3Li(2)S/nNaSEt in methanol/acetonitrile (n = 4) affords (R(4)N)(4)[4] (R = Et, Bu; 70-80%). The structure of 4 contains the [Mo(2)Fe(4)(mu(2)-S)(6)(mu(3)-S)(2)(mu(4)-S)](0) core, with the same bridging pattern as the [Fe(6)S(9)](2-) core of [Fe(6)S(9)(SR)(2)](4-) (1), in overall C(2v) symmetry. Cluster 4 supports a reversible three-member electron transfer series 4-/3-/2- with E(1/2) = -0.76 and -0.30 V in Me(2)SO. Oxidation of (Et(4)N)(4)[4] in DMF with 1 equiv of tropylium ion gives [(edt)(2)Mo(2)Fe(4)S(9)](3-) (5) isolated as (Et(4)N)(3)[5].2DMF (75%). Alternatively, the assembly system (n = 3) gives the oxidized cluster directly as (Bu(4)N)(3)[5] (53%). Treatment of 5 with 1 equiv of [Cp(2)Fe](1+) in DMF did not result in one-electron oxidation but instead produced heptanuclear [(edt)(2)Mo(2)Fe(5)S(11)](3-) (6), isolated as the Bu(4)N(+)salt (38%). Cluster 6 features the previously unknown core Mo(2)Fe(5)(mu(2)-S)(7)(mu(3)-S)(4) in molecular C(2) symmetry. In 4-6, the (edt)MoS(3) sites are distorted trigonal bipramidal and the FeS(4) sites are distorted tetrahedral with all sulfide ligands bridging. M?ssbauer spectroscopic data for 2 and 4-6 are reported; (mean) iron oxidation states increase in the order 4 < 5 approximately 1 < 6 approximately 2. Redox and spectroscopic data attributed earlier to clusters 2 and 4 are largely in disagreement with those determined in this work. The only iron and molybdenum[bond]iron clusters with the same sulfide content as the iron[bond]molybdenum cofactor of nitrogenase are [Fe(6)S(9)(SR)(2)](4-) and [(edt)(2)Mo(2)Fe(4)S(9)](3-)(,4-).     

Synthesis and characterization of Mo(6) chalcobromides and cyano-substituted compounds built from a novel [(Mo(6)Br(i)(6)Y(i)(2))L(a)(6)](n)()(-) discrete cluster unit (Y(i) = S or Se and L(a) = Br or CN)

The syntheses, crystal structures determined by single-crystal X-ray diffraction, and characterizations of new Mo(6) cluster chalcobromides and cyano-substituted compounds with 24 valence electrons per Mo(6) cluster (VEC = 24), are presented in this work. The structures of Cs(4)Mo(6)Br(12)S(2) and Cs(4)Mo(6)Br(12)Se(2) prepared by solid state routes are based on the novel [(Mo(6)Br(i)(6)Y(i)(2))Br(a)(6)](4)(-) (Y = S, Se) discrete units in which two chalcogen and six bromine ligands randomly occupy the inner positions, while the six apical ones are fully occupied by bromine atoms. The interaction of these two compounds with aqueous KCN solution results in apical ligand exchange giving the two first Mo(6) cyano-chalcohalides: Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)S(2))(CN)(6)](3).16H(2)O and Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)Se(2))(CN)(6)](3).16H(2)O. Their crystal structures, built from the original [(Mo(6)Br(i)(6)Y(i)(2))(CN)(a)(6)](4)(-) discrete units, will be compared to those of the two solid state precursors and other previously reported Mo(6) cluster compounds. Their redox properties and (77)Se NMR characterizations will be presented. Crystal data: Cs(4)Mo(6)Br(12)S(2), orthorhombic, Pbca (No. 61), a = 11.511(5) A, b = 18.772(5) A, c = 28.381 A (5), Z = 8; Cs(4)Mo(6)Br(12)Se(2), Pbca (No. 61), a = 11.6237(1) A, b = 18.9447(1) A, c = 28.4874(1) A, Z = 8; Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)S(2))(CN)(6)](3).16H(2)O, Pm-3m (No. 221), a = 17.1969(4) A, Z = 1; Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)Se(2))(CN)(6)](3).16H(2)O, Pm-3m (No. 221), a = 17.235(5) A, Z = 1.     

Anion-directed crystallization of coordination polymers: syntheses and characterization of Cu(4)(2-pzc)(4)(H(2)O)(8)(Mo(8)O(26)).2H(2)O and Cu(3)(2-pzc)(4)(H(2)O)(2)(V(10)O(28)H(4)).6.5H(2)O (2-pzc = 2-pyrazinecarboxylate)

Two new copper 2-pyrazinecarboxylate (2-pzc) coordination polymers incorporating [Mo(8)O(26)](4-) and [V(10)O(28)H(4)](2-) anions were synthesized and structurally characterized: Cu(4)(2-pzc)(4))(H(2)O)(8)(Mo(8)O(26)).2H(2)O (1) and Cu(3)(2-pzc)(4)(H(2)O)(2)(V(10)O(28)H(4)).6.5H(2)O (2). Crystal data: 1, monoclinic, space group P2(1)/n, a = 11.1547(5) A, b = 13.4149(6) A, c = 15.9633(7) A, beta = 90.816(1) degrees; 2, triclinic, space group P1, a = 10.5896(10) A, b = 10.7921(10) A, c = 13.5168(13) A, alpha = 104.689(2) degrees, beta = 99.103(2) degrees, gamma = 113.419(2) degrees. Compound 1 contains [Cu(2-pzc)(H(2)O)(2)] chains charge-balanced by [Mo(8)O(26)](4-) anions. In compound 2, layers of [Cu(3)(2-pzc)(4)(H(2)O)(2)] form cavities that are filled with [V(10)O(28)H(4)](2-) anions. The magnetic properties of both compounds are described.     

Electrochemical, spectroscopic, structural, and magnetic characterization of the reduced and protonated alpha-Dawson anions in [Fe(eta(5)-C(5)Me(5))(2)](5)[HS(2)Mo(18)O(62)].3HCONMe(2).2Et(2)O and [NBu(4)](5)[HS(2)Mo(18)O(62)].2H(2)O(1)

Reaction of excess Fe(cp)(2) (cp = eta(5)-C(5)Me(5)) dissolved in Et(2)O with [NHex(4)](4)[S(2)Mo(18)O(62)] in acetonitrile, followed by recrystallization of the precipitated solid from N,N'-dimethylformamide (DMF), leads to isolation of the complex [Fe(cp)(2)](5)[HS(2)Mo(18)O(62)].3DMF.2Et(2)O. The solid has been characterized by microanalysis, by voltammetric analysis, by (1)H NMR, diffuse reflectance infrared, EPR, and M?ssbauer spectroscopies, and by temperature-dependent magnetic susceptibility measurements. The data are consistent with the presence of a paramagnetic [Fe(cp)(2)](+) cation and a diamagnetic two-electron-reduced [HS(2)Mo(18)O(62)](5-) anion. The related salt [NBu(4)](5)[HS(2)Mo(18)O(62)].2H(2)O crystallizes in space group C2/c with a = 25.1255(3) A, b = 15.4110(2) A, c = 35.8646(4) A, beta = 105.9381(4), V = 13353.3(3) A(3), and Z = 4. The (2 e(-), 1 H(+))-reduced anion exists as the alpha-Dawson isomer, and its structure may be compared with those of the oxidized and (4 e(-), 3 H(+))-reduced anions as they exist in [NEt(4)](4)[S(2)Mo(18)O(62)].MeCN and [NBu(4)](5)[H(3)S(2)Mo(18)O(62)].4MeCN, respectively. Overall, the anion expands significantly upon the addition of two and then four electrons. However, the Mo...Mo distances along the bonds which connect the two equatorial belts decrease in the order 3.801, 3.780, and 3.736 A, making these distances the shortest for the three inequivalent sets of corner-sharing octahedra in each anion. This is consistent with the two or four added electrons localizing essentially in molecular orbitals which are bondiing with respect to interactions between the belts.     

Investigations of the TeCl(4)-(t)BuNHLi Reaction: Synthesis, X-ray Structures, and Fluxional Behavior of the Tellurium-Nitrogen Compounds [Li(2)Te(N(t)Bu)(3)](2), {[LiTe(N(t)Bu)(2)(NH(t)Bu)](2)LiCl}(2), and {Te(2)(N(t)Bu)(4)[LiTe(N(t)Bu)(2)(NH(t)Bu)]LiCl}(2)

The reaction of (t)BuNHLi with TeCl(4) in toluene at -78 degrees C produces (t)BuNTe(&mgr;-N(t)Bu)(2)TeN(t)Bu (1) (55%) or [((t)BuNH)Te(&mgr;-N(t)Bu)(2)TeN(t)Bu]Cl (2) (65%) for 4:1 or 7:2 molar ratios, respectively. The complex {Te(2)(N(t)Bu)(4)[LiTe(N(t)Bu)(2)(NH(t)Bu)]LiCl}(2) (5) is obtained as a minor product (23%) from the 4:1 reaction. It is a centrosymmetric dimer in which each half consists of the tellurium diimide dimer 1 bonded through an exocyclic nitrogen atom to a molecule of LiTe(N(t)Bu)(2)(NH(t)Bu) which, in turn, is linked to a LiCl molecule. Crystals of 5 are monoclinic, of space group C2/c, with a = 27.680(6) ?, b = 23.662(3) ?, c = 12.989(2) ?, beta = 96.32(2) degrees, V = 8455(2) ?(3), and Z = 4. The final R and R(w) values were 0.046 and 0.047. At 65 degrees C in toluene solution, 5 dissociates into 1, LiCl, and {[LiTe(N(t)Bu)(2)(NH(t)Bu)](2)LiCl}(2) (4), which may also be prepared by treatment of [Li(2)Te(N(t)Bu)(3)](2) (6) with 2 equiv of HCl gas. The centrosymmetric structure of 6 consists of a distorted hexagonal prism involving two pyramidal Te(N(t)Bu)(3)(2)(-) anions linked by four Li atoms to give a Te(2)N(6)Li(4) cluster. Crystals of 6 are monoclinic, of space group P2(1)/c, with a = 10.194(2) ?, b = 17.135(3) ?, c = 10.482(2) ?, beta = 109.21(1) degrees, V = 1729.0(5) ?(3), and Z = 2. The final R and R(w) values were 0.026 and 0.023. VT (1)H and (7)Li NMR studies reveal that, unlike 1, compounds 2, 4, and 6 are fluxional molecules. Possible mechanisms for these fluxional processes are discussed.     

Interconversion and Reactivity of Two Heterometallic Tin-Containing Cuboidal Clusters from [Mo(3)S(4)(H(2)O)(9)](4+): X-ray Structure of the Single Cube with an Mo(3)SnS(4) Core

The Mo(3)SnS(4)(6+) single cube is obtained by direct addition of Sn(2+) to [Mo(3)S(4)(H(2)O)(9)](4+). UV-vis spectra of the product (0.13 mM) in 2.00 M HClO(4), Hpts, and HCl indicate a marked affinity of the Sn for Cl(-), with formation of the more strongly yellow [Mo(3)(SnCl(3))S(4)(H(2)O)(9)](3+) complex complete in as little as 0.050 M Cl(-). The X-ray crystal structure of (Me(2)NH(2))(6)[Mo(3)(SnCl(3))S(4)(NCS)(9)].0.5H(2)O has been determined and gives Mo-Mo (mean 2.730 ?) and Mo-Sn (mean 3.732 ?) distances, with a difference close to 1 ?. The red-purple double cube cation [Mo(6)SnS(8)(H(2)O)(18)](8+) is obtained by reacting Sn metal with [Mo(3)S(4)(H(2)O)(9)](4+). The double cube is also obtained in approximately 50% yield by BH(4)(-) reduction of a 1:1 mixture of [Mo(3)SnS(4)(H(2)O)(10)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+). Conversely two-electron oxidation of [Mo(6)SnS(8)(H(2)O)(18)](8+) with [Co(dipic)(2)](-) or [Fe(H(2)O(6)](3+) gives the single cube [Mo(3)SnS(4)(H(2)O)(12)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+) (up to 70% yield), followed by further two-electron oxidation to [Mo(3)S(4)(H(2)O)(9)](4+) and Sn(IV). The kinetics of the first stages have been studied using the stopped-flow method and give rate laws first order in [Mo(6)SnS(8)(H(2)O)(18)](8+) and the Co(III) or Fe(III) oxidant. The oxidation with [Co(dipic)(2)](-) has no [H(+)] dependence, [H(+)] = 0.50-2.00 M. With Fe(III) as oxidant, reaction steps involving [Fe(H(2)O)(6)](3+) and [Fe(H(2)O)(5)OH](2+) are implicated. At 25 degrees C and I = 2.00 M (Li(pts)) k(Co) is 14.9 M(-)(1) s(-)(1) and k(a) for the reaction of [Fe(H(2)O)(6)](3+) is 0.68 M(-)(1) s(-)(1) (both outer-sphere reactions). Reaction of Cu(2+) with the double but not the single cube is observed, yielding [Mo(3)CuS(4)(H(2)O)(10)](5+). A redox-controlled mechanism involving intermediate formation of Cu(+) and [Mo(3)S(4)(H(2)O)(9)](4+) accounts for the changes observed.     

New high-dimensional networks based on polyoxometalate and crown ether building blocks

Three novel supramolecular assemblies constructed from polyoxometalate and crown ether building blocks, [(DB18C6)Na(H(2)O)(1.5)](2)Mo(6)O(19).CH(3)CN, 1, and [(Na(DB18C6)(H(2)O)(2))(3)(H(2)O)(2)]XMo(12)O(40).6DMF.CH(3)CN (X = P, 2, and As, 3; DB18C6 = dibenzo-18-crown-6; DMF = N,N-dimethylfomamide), have been synthesized and characterized by elemental analyses, IR, UV-vis, EPR, TG, and single crystal X-ray diffraction. Compound 1 crystallizes in the tetragonal space group P4/mbm with a = 16.9701(6) A, c = 14.2676(4) A, and Z = 2. Compound 2 crystallizes in the hexagonal space group P6(3)/m with a = 15.7435(17) A, c = 30.042(7) A, gamma = 120 degrees, and Z = 2. Compound 3 crystallizes in the hexagonal space group P6(3)/m with a = 15.6882(5) A, c = 29.9778(18) A, gamma = 120 degrees, and Z = 2. Compound 1 exhibits an unusual three-dimensional network with one-dimensional sandglasslike channels based on the extensive weak forces between the oxygen atoms on the [Mo(6)O(19)](2)(-) polyoxoanions and the CH(2) groups of crown ether molecules. Compounds 2 and 3 are isostructural, and both contain a novel semiopen cagelike trimeric cation [(Na(DB18C6)(H(2)O)(2))(3)(H(2)O)(2)](3+). In their packing arrangement, an interesting 2-D "honeycomblike" "host" network is formed, in which the [XMo(12)O(40)](3)(-) (X = As and P) polyoxoanion "guests" resided.     

Heterobimetallic, cubane-like Mo(3)S(4)M' cluster cores containing the noble metals M' = Ru, Os, Rh, Ir. Unprecedented tri(mu-carbonyl) bridge between ruthenium atoms in [(eta(5)-Cp')(3)Mo(3)S(4)Ru)2(mu-CO)3]2+

Reaction of the methylcyclopentadienyl (Cp') cluster compound [(eta(5)-Cp')(3)Mo(3)S(4)][pts] (pts = p-toluenesulfonate) with noble metal alkene complexes resulted in the formation of four new heterobimetallic cubane-like Mo(3)S(4)M' cluster cores (M' = Ru, Os, Rh, Ir). Thus, reaction with [(1,5-cod)Ru(CO)(3)] or [(1,3-cod)Os(CO)(3)] (cod = cyclooctadiene) afforded [(eta(5)-Cp')(3)Mo(3)S(4)M'(CO)(2)][pts] (M' = Ru: [1][pts]; M' = Os: [2][pts]). When [1][pts] was kept in CH(2)Cl(2)/pentane solution, partial loss of carbonyl ligands occurred and the carbonyl-bridged dicubane cluster [((eta(5)-Cp')(3)Mo(3)S(4)Ru)(2)(mu-CO)(3)][pts](2) was isolated. An X-ray crystal structure revealed the presence of the hitherto unobserved Ru(mu-CO)(3)Ru structural element. The formation of cluster compounds containing Mo(3)S(4)Rh and Mo(3)S(4)Ir cores was achieved in boiling methanol by reacting [(eta(5)-Cp')(3)Mo(3)S(4)][pts] with [M'Cl(cyclooctene)(2)](2) (M' = Rh, Ir) in the presence of PPh(3). In this way [(eta(5)-Cp')(3)Mo(3)S(4)M'Cl(PPh(3))][pts] (M' = Rh, Ir) could be isolated. An alternative route to the Mo(3)S(4)Rh cluster core was found in the reaction of [(eta(5)-Cp')(3)Mo(3)S(4)][pts] with [RhCl(1,5-cod)](2), which yielded [(eta(5)-Cp')(3)Mo(3)S(4)Rh(cod)][pts](2) ([7][pts](2)). Substitution of the cod ligand in [7][pts](2) by 1,3-bis(diphenylphosphanyl)propane (dppp) gave [(eta(5)-Cp')(3)Mo(3)S(4)Rh(dppp)][pts](2).     

Syntheses, structures, and magnetic properties of low-dimensional heterometallic complexes based on the versatile building block [(Tp)Cr(CN)3]-

Using the tricyano precursor (Bu(4)N)[(Tp)Cr(CN)(3)] (Bu(4)N(+) = tetrabutylammonium cation; Tp = tris(pyrazolyl)hydroborate), a pentanuclear heterometallic cluster [(Tp)(2)Cr(2)(CN)(6)Cu(3)(Me(3)tacn)(3)][(Tp)Cr(CN)(3)](ClO(4))(3)·5H(2)O (1, Me(3)tacn = N,N',N'-trimethyl-1,4,7-triazacyclononane), three tetranuclear heterometallic clusters [(Tp)(2)Cr(2)(CN)(6)Cu(2)(L(OEt))(2)]·2.5CH(3)CN (2, L(OEt) = [(Cp)Co(P(O)(OEt)(2))(3)], Cp = cyclopentadiene), [(Tp)(2)Cr(2)(CN)(6)Mn(2)(L(OEt))(2)]·4H(2)O (3), and [(Tp)(2)Cr(2)(CN)(6)Mn(2)(phen)(4)](ClO(4))(2) (4, phen = phenanthroline), and a one-dimensional (1D) chain polymer [(Tp)(2)Cr(2)(CN)(6)Mn(bpy)](n) (5, bpy = 2,2'-bipyridine) have been synthesized and structurally characterized. Complex 1 shows a trigonal bipyramidal geometry in which [(Tp)Cr(CN)(3)](-) units occupy the apical positions and are linked through cyanide to [Cu(Me(3)tacn)](2+) units situated in the equatorial plane. Complexes 2-4 show similar square structures, where Cr(III) and M(II) (M = Cu(II) or Mn(II)) ions are alternatively located on the rectangle corners. Complex 5 consists of a 4,2-ribbon-like bimetallic chain. Ferromagnetic interactions between Cr(III) and Cu(II) ions bridged by cyanides are observed in complexes 1 and 2. Antiferromagnetic interactions are presented between Cr(III) and Mn(II) ions bridged by cyanides in complexes 3-5. Complex 5 shows metamagnetic behavior with a critical field of about 22.5 kOe at 1.8 K.     

Synthesis, characterization, and photoresponsive properties of a series of Mo(IV)-Cu(II) complexes

Six Mo(IV)-Cu(II) complexes, [Cu(tpa)](2)[Mo(CN)(8)]·15H(2)O (1, tpa = tris(2-pyridylmethyl)amine), [Cu(tren)](2)[Mo(CN)(8)]·5.25H(2)O (2, tren = tris(2-aminoethyl)amine), [Cu(en)(2)][Cu(0.5)(en)][Cu(0.5)(en)(H(2)O)][Mo(CN)(8)]·4H(2)O (3, en = ethylenediamine), [Cu(bapa)](3)[Mo(CN)(8)](1.5)·12.5H(2)O (4, bapa = bis(3-aminopropyl)amine), [Cu(bapen)](2)[Mo(CN)(8)]·4H(2)O (5, bapen = N,N'-bis(3-aminopropyl)ethylenediamine), and [Cu(pn)(2)][Cu(pn)][Mo(CN)(8)]·3.5H(2)O (6, pn = 1,3-diaminopropane), were synthesized and characterized. Single-crystal X-ray diffraction analyses show that 1-6 have different structures varying from trinuclear clusters (1-2), a one-dimensional belt (3), two-dimensional grids (4-5), to a three-dimensional structure (6). Magnetic and ESR measurements suggest that 1-6 exhibit thermally reversible photoresponsive properties on UV light irradiation through a Mo(IV)-to-Cu(II) charge transfer mechanism. A trinuclear compound [Cu(II)(tpa)](2)[Mo(V)(CN)(8)](ClO(4)) (7) was synthesized as a model of the photoinduced intermediate.