Flow with separation of an ideal fluid past a wing of infinite aspect ratio with a triangular protrusion

A study is made of the steady flow of an incompressible ideal fluid past a rectangular wing of infinite aspect ratio that has a protrusion on its leading edge. The protrusion is a triangular plate of small aspect ratio. It is assumed that flow separation occurs only from the side edges of the protrusion. An asymptotic solution to the problem is found for = O(), = o(1), where is the half-angle at the tip of the protrusion, and is the angle of attack. The results of numerical calculations are given.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 65–72, May–June, 1982.We are sincerely grateful to G. P. Svishchev for posing the problem and for interest in the work.     

Determination of permeability tensors for two-phase flow in homogeneous porous media: Theory

In this paper we continue previous studies of the closure problem for two-phase flow in homogeneous porous media, and we show how the closure problem can be transformed to a pair of Stokes-like boundary-value problems in terms of pressures that have units of length and velocities that have units of length squared. These are essentially geometrical boundary value problems that are used to calculate the four permeability tensors that appear in the volume averaged Stokes' equations. To determine the geometry associated with the closure problem, one needs to solve the physical problem; however, the closure problem can be solved using the same algorithm used to solve the physical problem, thus the entire procedure can be accomplished with a single numerical code.Nomenclature a a vector that maps V onto , m^-1. - A a tensor that maps V onto . - A area of the - interface contained within the macroscopic region, m². - A area of the -phase entrances and exits contained within the macroscopic region, m². - A area of the - interface contained within the averaging volume, m². - A area of the -phase entrances and exits contained within the averaging volume, m². - Bo Bond number (= (=(–)g²/). - Ca capillary number (= v/). - g gravitational acceleration, m/s². - H mean curvature, m^-1. - I unit tensor. - permeability tensor for the -phase, m². - viscous drag tensor that maps V onto V. - ^* dominant permeability tensor that maps onto v , m². - ^* coupling permeability tensor that maps onto v , m². - characteristic length scale for the -phase, m. - l characteristic length scale representing both and , m. - L characteristic length scale for volume averaged quantities, m. - n unit normal vector directed from the -phase toward the -phase. - n unit normal vector representing both n and n . - n unit normal vector representing both n and n . - P pressure in the -phase, N/m². - p superficial average pressure in the -phase, N/m². - p intrinsic average pressure in the -phase, N/m². - p –p , spatial deviation pressure for the -phase, N/m². - r ₀ radius of the averaging volume, m. - r position vector, m. - t time, s. - v fluid velocity in the -phase, m/s. - v superficial average velocity in the -phase, m/s. - v intrinsic average velocity in the -phase, m/s. - v –v , spatial deviation velocity in the -phase, m/s. - V volume of the -phase contained within the averaging volmue, m³. - averaging volume, m³. Greek Symbols V /, volume fraction of the -phase. - viscosity of the -phase, Ns/m². - density of the -phase, kg/m³. - surface tension, N/m. - (v +v ^T ), viscous stress tensor for the -phase, N/m².     

Mixed convection flow in narrow vertical ducts

The mixed convection flow in a vertical duct is analysed under the assumption that , the ratio of the duct width to the length over which the wall is heated, is small. It is assumed that a fully developed Poiseuille flow has already been set up in the duct before heat from the wall causes this to be changed by the action of the buoyancy forces, as measured by a buoyancy parameter . An analytical solution is derived for the case when the Reynolds numberRe, based on the duct width, is of 0 (1). This is extended to the case whenRe is 0 (^–1) by numerical integrations of the governing equations for a range of values of representing both aiding and opposing flows. The limiting cases, || 1 andR=Re of 0 (1), andR and both large, with of 0 (R ^1/3) are considered further. Finally, the free convection limit, large with R of 0 (1), is discussed.

---

Mischkonvektion in engen senkrechten Rohren

Zusammenfassung Mischkonvektion in einem senkrechten Rohr wird unter der Voraussetzung untersucht, daß das Verhältnis der Rohrbreite zur Länge, über welche die Wand beheizt wird, klein ist. Es wird angenommen, daß sich bereits eine voll entwickelte Poiseuille-Strömung in dem Rohr eingestellt hat, bevor Antriebskräfte, gemessen mit dem Auftriebsparameter , aufgrund der Wandbeheizung die Strömung verändern. Es wird eine analytische Lösung für den Fall erhalten, daß die mit der Rohrbreite als charakteristische Länge gebildete Reynolds-ZahlRe konstant ist. Dies wird mittels einer numerischen Integration der wichtigsten Gleichungen auf den FallRe =f (^–1) sowohl für Gleich- als auch für Gegenstrom ausgedehnt. Weiterhin werden die beiden Grenzfälle betrachtet, wenn || 1 undR=Re konstant ist, sowieR und beide groß mit proportionalR ^1/3. Schließlich wird der Grenzfall der freien Konvektion, großes mit konstantem R, diskutiert.

---

Nomenclature g acceleration due to gravity - Gr Grashof number - G modified Grashof number - h duct width - l length of the heated section of the duct wall - p pressure - Pr Prandtl number - Q flow rate through the duct - Q ₀ heat transfer on the wally=0 - Q ₁ heat transfer on the wally=1 - Re Reynolds number - R modified Reynolds number - T temperature of the fluid - T ₀ ambient temperature - T applied temperature difference - u, velocity component in thex-direction - v, velocity component in they-direction - x, co-ordinate measuring distance along the duct - y, co-ordinate measuring distance across the duct - buoyancy parameter - ₀ modified buoyancy parameter, ₀=R ^–1/3 - coefficient of thermal expansion - ratio of duct width to heated length, =h/l - (non-dimensional) temperature - _w applied temperature on the wally=0 - kinematic viscosity - density of the fluid - ₀ shear stress on the wally=0 - ₁ shear stress on the wally=1 - stream function     

A Direct Method for the Identification of the Permeability Field Based on Flux Assimilation by a Discrete Analog of Darcy's Law

Inverse models to determine the permeability are generally based on existing forward models for the pressure. The permeabilities are adapted in such a way that the calculated pressures match the specified pressures in a number of points. To assimilate a priori knowledge about the flux, we introduce the flux assimilation method, which is based on the vector potential–pressure formulation of Darcy's law. Thanks to an unconventional discretization technique – the edge-based face element method – not only the specified pressures, but also specified information about the flux density can easily be assimilated. A relatively simple, but insightful analytical example illustrates the potential of this method.     

Concentration dependence of the critical viscoelastic properties of gelatin at the gel point

Gelatin gel properties have been studied through the evolution of the storage [G()] and the loss [G()] moduli during gelation or melting near the gel point at several concentrations. The linear viscoelastic properties at the percolation threshold follow a power-law G()G() and correspond to the behavior described by a rheological constitutive equation known as the Gel Equation. The critical point is characterized by the relation: tan = G/G = cst = tan ( · /2) and it may be precisely located using the variations of tan versus the gelation or melting parameter (time or temperature) at several frequencies. The effect of concentration and of time-temperature gel history on its variations has been studied. On gelation, critical temperatures at each concentration were extrapolated to infinite gel times. On melting, critical temperatures were determined by heating step by step after a controlled period of aging. Phase diagrams [T = f(C)] were obtained for gelation and melting and the corresponding enthalpies were calculated using the Ferry-Eldridge relation. A detailed study of the variations of A with concentration and with gel history was carried out. The values of which were generally in the 0.60–0.72 range but could be as low as 0.20–0.30 in some experimental conditions, were compared with published and theoretical values.     

Irrotational outflow of liquid from a stream through a lateral hole of finite depth

An algorithm is constructed for numerical determination of the flow parameters and coefficient of contraction of a jet in the case of irrotational lateral outflow of liquid from a semiinfinite stream through a nozzle of finite depth situated at an arbitrary angle to the mainstream flow. The solution is based on the use of N. E. Zhukovskii's method and the Schwarz-Christoffel formula. The results of calculations for a nozzle situated at an angle = /2 ± , where = /6, are given.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 162–164, January–February, 1977.     

Transcendentally small transversality in the rapidly forced pendulum

The rapidly forced pendulum equation with forcing sin((t/), where =<₀^p,p = 5, for ₀, sufficiently small, is considered. We prove that stable and unstable manifolds split and that the splitting distanced(t) in the ( ,t) plane satisfiesd(t) = sin(t/) sech(/2) +O( ₀ exp(–/2)) (2.3a) and the angle of transversal intersection,, in thet = 0 section satisfies 2 tan/2 = 2S _s = (/2) sech(/2) +O(( ₀ /) exp(–/2)) (2.3b) It follows that the Melnikov term correctly predicts the exponentially small splitting and angle of transversality. Our method improves a previous result of Holmes, Marsden, and Scheuerle. Our proof is elementary and self-contained, includes a stable manifold theorem, and emphasizes the phase space geometry.     

The third-normal stress difference in entangled melts: Quantitative stress-optical measurements in oscillatory shear

Stress-optical measurements are used to quantitatively determine the third-normal stress difference (N ₃ = N ₁ + N ₂) in three entangled polymer melts during small amplitude (<15%) oscillatory shear over a wide dynamic range. The results are presented in terms of the three material functions that describe N ₃ in oscillatory shear: the real and imaginary parts of its complex amplitude ₃ ^* = ₃ - i ₃ , and its displacement ₃ ^d . The results confirm that these functions are related to the dynamic modulus by ² ₃ ^* ()=(1-)[G ^*())– G ^*(2)] and ² ₃ ^d ()=(1- )G() as predicted by many constitutive equations, where = –N ₂/N ₁. The value of (1-) is found to be 0.69±0.07 for poly(ethylene-propylene) and 0.76±0.07 for polyisoprene. This corresponds to –N ₂/N ₁ = 0.31 and 0.24±0.07, close to the prediction of the reptation model when the independent alignment approximation is used, i.e., –N ₂/N ₁ = 2/7 – 0.28.     

Construction of exact numerical solutions of the stationary traveling wave type for viscous thin films

An effective numerical procedure, based on the Galerkin method, for finding solutions of the stationary traveling wave type in the complete formulation is proposed for the case of viscous liquid films. Examples of a viscous film flowing freely down a vertical surface have been calculated. The calculations have been made for various values of the dimensionless surface tension , including =0. The method makes it possible to predict a number of bifurcations that occur as decreases. The existence of numerous families of stationary traveling waves when 1 was demonstrated in [6]. The present study shows that as 1 all but one of these families of wave solutions disappear. The shape of the periodic and solitary waves and the pressure distribution in the film are found for various . When =0 and the wave number is fairly small, the periodic solution has a singularity, as predicted in [14]: at the crest of the wave a corner point appears; the angle between the tangents at this point =140–150. The method proposed can be used to calculate other wavy film flows.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 94–100, May–June, 1990.     

Effect of blowing on the resistance of a sphere in laminar flow of viscous fluid

Using the method of matching asymptotic expansions [1–3], a stationary field of velocities is obtained in the vicinity of a sphere for Reynolds numbers R and R computed from the blowing velocity and the fluid flow, respectively; they satisfy the relations R² 1 and R 1. It is also shown that for intensive blowing (R 1), the resistive force is considerably smaller than that found by using the Stokes formula. For weak blowing the results are in good agreement with the solution of Oseen.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskai Fiziki, No. 3, pp. 110–114, May–June, 1972.     

Classification of linear viscoelastic solids based on a failure criterion

An isotropic, incompressible linear viscoelastic solid subjected to a step shear displacement fails if the relaxation function G(s) is such that 0<G(0)< and –<G(0)0. In this case, the discontinuity in displacement propagates into the interior of the body. The discontinuity will not propagate however if G(0)= or G(0)=–. In the former case there is a diffusion-like smoothening of discontinuous data characteristic of parabolic equations. The case G(0)= may be achieved by composing the kernel as a sum of a smooth kernel and a delta function at the origin times a viscosity coefficient. If the viscosity is small, the smoothing will take place in a propagating layer which scales with the small viscosity. The case of G(0)=– is interesting in the sense that the solution is C smooth but the boundary of the support of the solution propagates at a constant wave spped. If 0<G(0)< and –<G(0)<0, then the material accomodates stress waves under step traction leading to an elastic steady state.     

Propagation of a spherical wave in nonlinearly compressible and elastoplastic materials

The problem of spherical wave propagation in soil under the action of an intense uniformly decreasing load ₀(t) applied to the boundary of a cavity with radius r₀ is considered. Soil with a high stress level is modeled either by ideally nonlinearly compressible or elastoplastic material, taking account of linear irreversible unloading for the material. In contrast to [1–7], in order to describe material movement use is made of strain theory [8] with determining functions = (), _i=_i(_i), where , _i, , _i are the first and second invariants of strain and stress tensors. During material loading these functions are presented in the form of polynomials ()=(_i+₂¦¦), _ii)=(_i-_2i)_i, in which constant coefficients _i, _i=1, 2) are determined by experiment, taking account of the triaxial stressed state of soil. Solution of the problem is constructed by an analytically reversible method, with prescribed shape for the shock-wave (SW) surface in the form of a second-degree polynomial relating to time t and a numerical method of characteristics for a prescribed arbitrarily decreasing load _i(t). On the basis of the analytical equations obtained, calculations are carried out for material parameters (including loading profile) in a computer and stresses and mass velocity of plastic and elastoplastic materials are compared.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 4, pp. 95–100, July–August, 1986.The authors express their sincere thanks to Kh. A. Rakhmatulin for discussing the results of this work.     

Hypersonic flow past blunt-edged delta wings

A method is proposed for calculating hypersonic ideal-gas flow past blunt-edged delta wings with aspect ratios = 100–200. Systematic wing flow calculations are carried out on the intervals 6 M 20, 0 20, 60 80; the results are analyzed in terms of hypersonic similarity parameters.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 175–179, September–October, 1990.     

Thermodynamically complete equations of state for α-, ε-, and γ-iron

The numerical model of phase transition in iron in stress waves described in [1] contains equations of state with a limited range of applicability. They do not consider thermal excitation of conduction electrons and the presence of and — -triple point on the phase equilibrium curve, the effect of which should appear in shock loading of porous or preheated specimens. The present study will offer thermodynamically complete equations of state for the -, -, -phases of iron, free of these shortcomings.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 3, pp. 112–114, May–June, 1986.     

On the Ellipticity of the Middle Surface of a Shell and its Application to the Asymptotic Analysis of ‘Membrane’ Shells

We consider a surface S = (), where ² is a bounded, connected, open set with a smooth boundary and : ³ is a smooth map; let () denote the components of the two-dimensional linearized strain tensor of S and let 0 with length 0 > 0. We assume the the norm ,|| ()||0, in the space V0() = { H¹() × H¹() × L²(); = 0 on 0 } is equivalent to the usual product norm on this space. We then establish that this assumption implies that the surface S is uniformly elliptic and that we necessarily have 0 = .     

The extension of Beltrami's ellipsoid to anisotropic bodies

Summary The spectral decomposition of the compliance, stiffness, and failure tensors for transversely isotropic materials was studied and their characteristic values were calculated using the components of these fourth-rank tensors in a Cartesian frame defining the principal material directions. The spectrally decomposed compliance and stiffness or failure tensors for a transversely isotropic body (fiber-reinforced composite), and the eigenvalues derived from them define in a simple and efficient way the respective elastic eigenstates of the loading of the material. It has been shown that, for the general orthotropic or transversely isotropic body, these eigenstates consist of two double components, ₁ and ₂ which are shears (₂ being a simple shear and ₁, a superposition of simple and pure shears), and that they are associated with distortional components of energy. The remaining two eigenstates, with stress components ₃, and ₄, are the orthogonal supplements to the shear subspace of ₁ and ₂ and consist of an equilateral stress in the plane of isotropy, on which is superimposed a prescribed tension or compression along the symmetry axis of the material. The relationship between these superimposed loading modes is governed by another eigenquantity, the eigenangle .The spectral type of decomposition of the elastic stiffness or compliance tensors in elementary fourth-rank tensors thus serves as a means for the energy-orthogonal decomposition of the energy function. The advantage of this type of decomposition is that the elementary idempotent tensors to which the fourth-rank tensors are decomposed have the interesting property of defining energy-orthogonal stress states. That is, the stress-idempotent tensors are mutually orthogonal and at the same time collinear with their respective strain tensors, and therefore correspond to energy-orthogonal stress states, which are therefore independent of each other. Since the failure tensor is the limiting case for the respective _x, which are eigenstates of the compliance tensor S, this tensor also possesses the same remarkable property.An interesting geometric interpretation arises for the energy-orthogonal stress states if we consider the projections of _x in the principal₃D stress space. Then, the characteristic state ₂ vanishes, whereas stress states ₁, ₃ and ₄ are represented by three mutually orthogonal vectors, oriented as follows: The ₃ and ₄ lie on the principal diagonal plane (₃₁₂) with subtending angles equaling (–/2) and (-), respectively. On the positive principal ₃-axis, is the eigenangle of the orthotropic material, whereas the ₁-vector is normal to the (₃₁₂)-plane and lies on the deviatoric -plane. Vector ₂ is equal to zero.It was additionally conclusively proved that the four eigenvalues of the compliance, stiffness, and failure tensors for a transversely isotropic body, together with value of the eigenangle , constitute the five necessary and simplest parameters with which invariantly to describe either the elastic or the failure behavior of the body. The expressions for the _x-vector thus established represent an ellipsoid centered at the origin of the Cartesian frame, whose principal axes are the directions of the ₁-, ₃- and ₄-vectors. This ellipsoid is a generalization of the Beltrami ellipsoid for isotropic materials.Furthermore, in combination with extensive experimental evidence, this theory indicates that the eigenangle alone monoparametrically characterizes the degree of anisotropy for each transversely isotropic material. Thus, while the angle for isotropic materials is always equal to _i = 125.26° and constitutes a minimum, the angle || progressively increases within the interval 90–180° as the anisotropy of the material is increased. The anisotropy of the various materials, exemplified by their ratiosE _L/2G_L of the longitudinal elastic modulus to the double of the longitudinal shear modulus, increases rapidly tending asymptotically to very high values as the angle approaches its limits of 90 or 180°.     

Über den Einfluß von Querkrümmung und Dichte bei inhomogenen turbulenten Freistrahlen

Zusammenfassung Zur Berechnung turbulenter Strömungen wird das k--Modell im Ansatz für die turbulente Scheinzähigkeit erweitert, so daß es den Querkrümmungs- und Dichteeinfluß auf den turbulenten Transportaustausch erfaßt. Die dabei zu bestimmenden Konstanten werden derart festgelegt, daß die bestmögliche Übereinstimmung zwischen Berechnung und Messung erzielt wird. Die numerische Integration der Grenzschichtgleichungen erfolgt unter Verwendung einer Transformation mit dem Differenzenverfahren vom Hermiteschen Typ. Das erweiterte Modell wird auf rotationssymmetrische Freistrahlen veränderlicher Dichte angewendet und zeigt Übereinstimmung zwischen Rechnung und Experiment.

---

On the influence of transvers-curvature and density in inhomogeneous turbulent free jets

The prediction of turbulent flows based on the k- model is extended to include the influence of transverse-curvature and density on the turbulent transport mechanisms. The empirical constants involved are adjusted such that the best agreement between predictions and experimental results is obtained. Using a transformation the boundary layer equations are solved numerically by means of a finite difference method of Hermitian type. The extended model is applied to predict the axisymmetric jet with variable density. The results of the calculations are in agreement with measurements.

---

Bezeichnungen Wirbelabsorptionskoeffizient - c_i Massenkonzentration der Komponente i - c_D, c_L, c, c₁, c₂ Konstanten des Turbulenzmodells - d Düsendurchmesser - E bezogene Dissipationsrate - f bezogene Stromfunktion - f Korrekturfunktion für die turbulente Scheinzähigkeit - j turbulenter Diffusionsstrom - k Turbulenzenergie - k_i Schrittweite in -Richtung - K dimensionslose Turbulenzenergie - L turbulentes Längenmaß - M_i Molmasse der Komponente i - p Druck - allgemeine Gaskonstante - r Querkoordinate - r_0,5 Halbwertsbreite der Geschwindigkeit - r_0,5c Halbwertsbreite der Konzentration - T Temperatur - u Geschwindigkeitskomponente in x-Richtung - v Geschwindigkeitskomponente in r-Richtung - x Längskoordinate - y allgemeine Funktion - Y_i diskreter Wert der Funktion y - Relaxationsfaktor für Iteration - turbulente Dissipationsrate - transformierte r-Koordinate - kinematische Zähigkeit - Exponent - transformierte x-Koordinate - Dichte - _k, Konstanten des Turbulenzmodells - Schubspannung - allgemeine Variable - Stromfunktion - Turbulente Transportgröße Indizes 0 Strahlanfang - m auf der Achse - r mit Berücksichtigung der Krümmung - t turbulent - mit Berücksichtigung der Dichte - im Unendlichen - Schwankungswert oder Ableitung einer Funktion - – Mittelwert Herrn Professor Dr.-Ing. R. Günther zum 70. Geburtstag gewidmet     

Investigation of the flow past wings of infinite span with a blunt leading edge in the vorticity interaction regime

An asymptotic analysis of the Navier-Stokes equations is carried out for the case of hypersonic flow past wings of infinite span with a blunt leading edge when 0, Re , and M . Analytic solutions are obtained for an inviscid shock layer and inviscid boundary layer. The results of a numerical solution of the problems of vorticity interaction at the blunt edge and on the lateral surface of the wing are presented. These solutions are compared with the solution of the equations of a thin viscous shock layer and on the basis of this comparison the boundaries of the asymptotic regions are estimated.deceasedTranslated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 120–127, November–December, 1987.     

The boundary-layer flow past a suddenly heated vertical surface in a saturated porous medium

The boundary-layer flow generated on an impermeable vertical surface in a saturated porous medium is considered in the case when wall heating at a rate proportional tox is switched on at timet=0, (x measures distance along the wall and is a constant). The similarity equations which hold in the limit of larget are discussed and are shown to have a solution only for >–1. The behaviour of the solution as –1 and as is obtained. Numerical solutions of the initial value problem are then obtained for a range of values of . A direct numerical integration is possible for 1, while an iterative procedure is required for <1, with the numerical scheme becoming unstable for =–0.5.

---

Grenzschichtströmung an einer plötzlich aufgeheizten vertikalen Fläche, in einem gesättigten porösen Medium

Zusammenfassung Es wird die an einer undurchlässigen, vertikalen Fläche hervorgerufene Grenzschichtströmung im Falle eines Einschalten der Heizung beit=0 betrachtet. Die Stärke der Wandheizung is proportional zux , wobeix die Koordinate längs der Wand ist und eine Konstante. Die Ähnlichkeitsgleichungen werden für den Bereich von großen Zeitent besprochen und es wird gezeigt, daß eine Lösung nur für >–1 vorliegt. Es wird das Verhalten der Lösungen für –1 und erhalten. Numerische Lösungen für die Anfangsbedingungen des Problems werden für eine Reihe von -Werten errechnet. Eine direkte numerische Integration ist für 1 möglich, während für <1 eine Iteration erforderlich ist, wobei das numerische Verhalten für =–0.5 instabil wird.

     

On surface waves in generalized thermoelasticity

Knowles' representation theorem for harmonically time-dependent free surface waves on a homogeneous, isotropic elastic half-space is extended to include harmonically time-dependent free processes for thermoelastic surface waves in generalized thermoelasticity of Lord and Shulman and of Green and Lindsay.r , , r , , .This work was done when author was unemployed.