UV-absorption and fluorimetric methods for the determination of alprazolam in pharmaceutical formulation

The development of UV and fluorescence spectrophotometric methods for the quantitative determination of alprazolam in dosage forms using As(III)?SDS system. The two simple and sensitive, spectrophotometric and spectrofluorimetric methods were developed for the determination of alprazolam (ALP) in tablets. These methods are based on formation of ALP?As(III) complex in the presence of SDS. The UV-spectrum of 30% methanolic solution of ALP (5 × 10^?5 M) at pH 6.5 (Mclivaine buffer) was run between 200 and 380 nm. The absorption spectrum of ALP exhibits two peaks with a λ_max. at 255 nm and a weak band at 325 nm. When the spectra of the drug were run at varying pH in the region 200–380 nm, one isosbestic point at 290 nm was observed, which indicated the presence of two ionic conditions in solution. The complex exhibited an absorption maximum at 265 nm and emission peak at 520 nm with respect to the excitation wavelength of 325 nm. The spectrophotometric method was found to be linear in 8.0–17.0 μg ml^?1 range with detection limit of 13.520 μg ml^?1, while 0.05–9.5 μg ml^?1 range was with detection limit of 1.048 × 10^?2 μg ml^?1 by spectrofluorimetric method. The mean percentage recovery of the added quantity was found to be 99.54 (spectrophotometric method) and 100.22 (spectrofluorimetric method) and the %RSD are lower than 0.478 and 0.296 determined spectrophotomerically and spectrofluorimtrically, respectively. This indicates that the proposed method is accurate. The apparent ionization constant of ALP was found to be 9.29. The spectra, experimental conditions were set followed by determination stoichiometry, stability constant and thermodynamic parameters of the As(III), Co(II), Ni(II), and Zn(II) complexes with ALP at pH 6.5. The proposed methods have been successfully applied to the assay of ALP in tablets and the results were statistically evaluated.     

Ion-pairing and reversed phase liquid chromatography for the determination of three different quinolones: Enrofloxacin,lomefloxacin and ofloxacin

Two simple and sensitive high performance liquid chromatographic (HPLC) methods have been developed for the simultaneous determination of three different quinolones: enrofloxacin, lomefloxacin and ofloxacin in their pure and dosage forms, one with reversed phase HPLC and the other with ion-pair HPLC. In reversed phase HPLC, method (A), the mobile phase consists of 2.18% aqueous solution of KH₂PO₄ with pH adjusted to 2.4 ± 0.2 with acetonitrile (80:20; v/v), the mobile phase pumped at flow rate of 1.2 ml min^?1. A Neucleosil C₁₈ column (10 μm, 100 Å), 250 mm length × 4.6 mm diameter was utilized as stationary phase. Detection was affected spectrophotometrically at 294 nm. While in ion-pair HPLC, method (B), the mobile phase was aqueous solution of 0.65% sodium perchlorate and 0.31% ammonium acetate adjusted to pH 2.2 ± 0.2 with orthophosphoric acid: acetonitrile (81:19; v/v), the mobile phase pumped at flow rate of 1.5 ml min^?1. A μ bondapack C₁₈ column (10 μm, 100 Å), 250 mm length × 4.6 mm diameter was utilized as stationary phase. Detection was affected spectrophotometrically at 294 nm. Linearity ranges for enrofloxacin, lomefloxacin and ofloxacin were 4.0–108, 7.0–112 and 8.0–113 μg ml^?1, respectively using method A and 8.0–112, 7.0–112 and 5.0–105 μg ml^?1, respectively applying method B. Minimum detection limits obtained were 0.013, 0.023 and 0.035 μg ml^?1 for enrofloxacin, lomefloxacin and ofloxacin, respectively using method A, and 0.028, 0.023 and 0.011 μg ml^?1 using method B. The proposed methods were further applied to the analysis of enrofloxacin in injection and tablets containing the ofloxacin and lomefloxacin drugs, and the results were satisfied.     

Utility of oxidation–reduction reaction for the spectrophotometric determination of amlodipine besylate

A simple, rapid, accurate, precise and sensitive spectrophotometric method for the determination of amlodipine besylate (ADB) in bulk sample and in dosage forms is described. The method is based on oxidation of the drug by potassium permanganate in acidic medium and determine the unreacted oxidant by measuring the decrease in absorbance for five different dyes; methylene blue (MB), acid blue 74 (AB), acid red 73 (AR), amaranth dye (AM) and acid orange 7 (AO) at a suitable λ_max 663, 609, 511, 520, and 484 nm, respectively. Regression analysis of Beer's law plots showed good correlation in the concentration ranges 1.0–24, 0.9–22, 1.2–26, 0.9–12.8 and 1.0–14 μg ml^?1, respectively. The apparent molar absorptivity, Sandell sensitivity, detection and quantitation limits were calculated. For more accurate results, Ringbom optimum concentration ranges were 1.2–22.4, 1.1–20, 1.4–24.5, 1.0–12.3 and 1.3–13.2 μg ml^?1, respectively. Statistical treatment of the results reflects that the proposed procedures are precise, accurate and easily applicable for the determination of amlodipine besylate in pure form and in pharmaceutical preparations.     

Stability-indicating liquid chromatography for determination of clopidogrel bisulfate in tablets: Application to content uniformity testing

The present study describes a simple stability-indicating reversed-phase HPLC assay for antiplatelet drug, clopidogrel bisulfate. Separation of the drug and the degradation products, under stress conditions was successfully achieved on a C-18 column utilizing 0.01 M Na₂HPO₄ (pH 4): acetonitrile in the ratio 80:20 v/v, pumped at a flow rate of 0.5 ml min^?1 with UV detection at 235 nm. The retention time of clopidogrel was 6.84 min. The method was satisfactorily validated with respect to linearity, precision, accuracy, selectivity, sensitivity and ruggedness. The response was linear in the range of 0.2–3.5 μg ml^?1 with detection limit 0.079 μg ml^?1. The suggested method was successfully applied for the analysis of clopidogrel in bulk and in commercial tablets. The results were favorably compared to those obtained by a reference method. The proposed method was successfully applied to the content uniformity testing of tablets and for determination of clopidogrel in presence of its co-administered drug, acetyl salicylic acid.     

Hollow fiber supported liquid membrane microextraction of Cu2+ followed by flame atomic absorption spectroscopy determination

Hollow fiber supported liquid membrane microextraction, a relatively new sample preparation technique, has attracted much interest in the field of environmental analysis. In the current study, a novel method based on hollow-fiber liquid-phase microextraction and flame atomic absorption spectrometry (FAAS) for the measurement of copper ion in aqueous samples is described. Hollow-fiber liquid-phase microextraction conditions such as the type of extraction solvent, pH, the stirring rate, and the amounts of chelating agents, sample volume, and the extraction time were investigated. Under the optimized conditions, the linear range was found to be 0.01–15 μg ml^?1 for copper ion, and the limit of detection to be 0.004 μg ml^?1. Tap water and surface water samples collected from Mashhad, Iran and Dorongar river; Khorasan, Iran, respectively, were successfully analyzed using the proposed method. The recoveries from the spiked water samples were 72.4% and 105%, respectively; and the relative standard deviation (RSD) at the 2 μg ml^?1 level was 6%.     

The determination of trace lead in drinking water by flow injection spectrophotometry

Lead is the non-essential trace element in the human body, and it has been confirmed that drinking water is one of the sources of lead in human body. In the research, based on the sensitive colour reaction of lead with I^?–EV⁺–PVA, a simple, sensitive, accurate and portable method for the determination of trace lead in drinking waters was proposed. Chemicals and physicals had been optimized in detail. The apparent molar absorption coefficient was up to 7.4 × 10⁵ mol L^?1 cm^?1. The developed method provided a linearity range over 5–80 μg L^?1. The regression deviation was between 0.71% and 2.33%. The 3σ detection limit was 0.9 μg L^?1. Close to the quantitation limit for the analyte the relative standard deviation was 1.10% (n = 10) at 40 μg L^?1. The method developed here for analysis of lead yielded results that were comparable with those of the GFAAS.     

Determination of triclosan,triclocarban and methyl-triclosan in aqueous samples by dispersive liquid–liquid microextraction combined with rapid liquid chromatography

In this study, dispersive liquid–liquid microextraction (DLLME) combined with ultra-high-pressure liquid chromatography (UHPLC)–tunable ultraviolet detection (TUV), has been developed for pre-concentration and determination of triclosan (TCS), triclocarban (TCC) and methyl-triclosan (M-TCS) in aqueous samples. The key factors, including the kind and volume of extraction solvent and dispersive solvent, extraction time, salt effect and pH, which probably affect the extraction efficiencies were examined and optimized. Under the optimum conditions, linearity of the method was observed in the range of 0.0500–100 μg L^?1 for TCS, 0.0250–50.0 μg L^?1 for TCC, and 0.500–100 μg L^?1 for M-TCS, respectively, with correlation coefficients (r²) > 0.9945. The limits of detection (LODs) ranged from 45.1 to 236 ng L^?1. TCS in domestic waters was detected with the concentration of 2.08 μg L^?1. The spiked recoveries of three target compounds in river water, irrigating water, reclaimed water and domestic water samples were achieved in the range of 96.4–121%, 64.3–84.9%, 77.2–115% and 75.5–106%, respectively. As a result, this method can be successfully applied for the rapid and convenient determination of TCS, TCC and M-TCS in real water samples.     

Assay of caffeoylquinic acids in Baccharis trimera by reversed-phase liquid chromatography

Baccharis trimera commonly named ‘carqueja’, is wide-spread in South America and are used as raw material for herbal medicines. A reversed-phase liquid chromatography (RP-LC) method coupled to diode array detector was developed for the analysis of caffeoylquinic acids (CQAs), the main compounds responsible for its digestive activity. The identity of the quinic acids was established by mass spectrometry and were them: 5-O-[E]-caffeoylquinic acid, 3,4-O-[E]-dicaffeoylquinic acid, 3,5-O-[E]-dicaffeoylquinic acid, 4,5-O-[E]-dicaffeoylquinic acid and a tricaffeoylquinic acid. The RP-LC method for the quantitation of the caffeoylquinic acids was validated according to ICH guidelines, based on the following parameters: linearity, selectivity, robustness, limits of detection and quantification, precision and recovery. Hydroalcoholic extracts were prepared by the maceration of the plant material with ethanol:water 1:1 (v/v) in a 0.1:25 g mL^?1 plant:solvent ratio in a water bath at 40 °C. Validation data indicated that the HPLC method proposed is suitable for the analysis of caffeoylquinic acids in B. trimera raw material. The results of the LOD and LOQ analyses for the 5-CQA were 4.1 μg mL^?1 and 12.5 μg mL^?1, respectively, 1.3 μg mL^?1, 3.9 μg mL^?1 for 4,5-diCQA and 1.7 μg mL^?1, 5.1 μg mL^?1 for triCQA. The levels of total CQAs ranged from 2.1 to 4.0 g% (w/w). The influence of season harvest and site collection was also evaluated and variations were observed in the results and can be related to phonologic phase, different locations, seasons and soil. Long term and photostability of plant material were carried out and was observed a stable behavior during the time of the experiments.     

Utilization of oxidation reactions for the spectrophotometric determination of captopril using brominating agents

Three simple, accurate and sensitive methods (A–C) for the spectrophotometric assay of captopril (CPL) in bulk drug, in dosage forms and in the presence of its oxidative degradates have been described. The methods are based on the bromination of captopril with a solution of excess brominating mixture in hydrochloric acid medium. After bromination, the excess brominating mixture is followed by the estimation of surplus bromine by three different reaction schemes. In the first method (A), the determination of the residual bromine is based on its ability to bleach the indigo carmine dye and measuring the absorbance at 610 nm. Method B, involves treating the unreacted bromine with a measured excess of iron(II) and the remaining iron(II) is complexed with 1,10-phenanthroline and the increase in absorbance is measured at 510 nm. In method (C), the surplus bromine is treated with excess of iron(II) and the resulting iron(III) is complexed with thiocyanate and the absorbance is measured at 478 nm. In all the methods, the amount of bromine reacted corresponds to the drug content. The different experimental parameters affecting the development and stability of the color are carefully studied and optimized. Beer's law is valid within a concentration range of 0.4–6.0, 0.4–2.8 and 1.2–4.8 μg mL^?1 for methods A, B and C, respectively. The calculated apparent molar absorptivity was found to be 5.16 × 10⁴, 9.95 × 10⁴ and 1.74 × 10⁵ L mol^?1 cm^?1, for methods A, B and C, respectively. Sandell's sensitivity, correlation coefficients, detection and quantification limits are also reported. No interference was observed from common additives found in pharmaceutical preparations. The proposed methods are successfully applied to the determination of CPL in the tablet formulations with mean recoveries of 99.94–100.11% and the results were statistically compared with those of a reference method by applying Student's t- and F-test.     

Development of a solid phase extraction method for the multielement determination of trace metals in natural waters including sea-water by FI-ICP-MS

An automated solid phase extraction method by flow analysis on-line inductively coupled plasma mass spectrometry (FI-ICP-MS) for the determination of cobalt, chromium, nickel, cadmium, manganese, zinc, copper and lead in sea-water and other natural waters is described. The system is based on retention of the analytes onto a minicolumn packed with a chelating resin, 1,5-bis (2-pyridyl)-3-sulphophenyl methylene thiocarbonohydrazide immobilized on aminopropyl-controlled pore glass, placed in the injection valve of a simple flow manifold. The effects of chemical and flow variables were investigated and selected as a compromise between sensitivity and sampling frequency. So, the sample solutions (adjusted to pH 8.0 ± 0.5) were passed through the column. After washing the column with water, the adsorbed metals were subsequently eluted into the plasma with 4% m/m nitric acid. Detection limits of the trace metals (180 s sample loading time at a sample flow rate of 0.7 mL min^? 1; sampling frequency 8.6 h^? 1) were 0.002 μg L^? 1 for Co, 0.057 μg L^? 1 for Cr, 0.117 μg L^? 1 for Ni, 0.004 μg L^? 1 for Cd, 0.210 μg L^? 1 for Mn, 0.260 μg L^? 1 for Zn, 0.030 μg L^? 1 for Cu and 0.020 μg L^? 1 for Pb, with enrichment factors between 2.2 and 6.8. The accuracy of the proposed method was checked with certified reference materials (CRMs) of sea-water SLEW 3, LGC6016 and CASS-5, river water SLRS-5 and fortified lake water TMDA-54.4. The results from the determination of these metals were in agreement with the certified values and recovery values ranged between 92.2 and 110.6%. The method was applied to the determination of these metal ions in sea-water samples collected in the Málaga Bay in order to realize a pilot study necessary to generate preliminary information on which to base a more detailed pollution study by heavy metals of the Bay.     

An efficient upconversion luminescence energy transfer system for determination of trace amounts of nitrite based on NaYF4:Yb3+, Er3+ as donor

Based on NaYF₄:Yb³⁺, Er³⁺ upconversion nanocrystals as donor and 4-((4-(2-aminoethylamino)naphthalen-1-yl)diazenyl) benzenesulfonic acid dihydrochloride (ANDBS) as acceptor, an efficient luminescence energy transfer (LET) system was developed for selective and sensitive determination of trace amounts of nitrite. Based on Griess Reaction, ANDBS was generated by the quantitative reaction of nitrite, sulfanilamide and N-(1-naphtyl)-ethylenediamine dihydrochloride (N1NED). The degree of the overlaps between the emission spectrum of NaYF₄:Yb³⁺, Er³⁺ and the absorption spectrum of ANDBS were effective for luminescence energy transfer. Under the optimal condition, the upconversion luminescence quenching of NaYF₄:Yb³⁺, Er³⁺ was in proportion to the trace amounts of nitrite. The detection limit for nitrite achieved is 0.0046 μg mL^?1 and the system shows high sensitivity towards nitrite at 0.008000–0.2500 μg mL^?1 range.     

New,simple and validated kinetics spectrophotometric method for determination of moxifloxacine in its pharmaceutical formulations

The objective of this research was to develop a kinetic spectrophotometric method for determination of moxifloxacine (MOXF) in pure form and pharmaceutical formulations. The method was based on the formation of a colored N-vinyl chlorobenzoquinone derivative of MOXF by its reaction with 2,3,5,6-tetrachloro-1,4-benzoquinone in presence of acetaldehyde.The formation of the colored product was monitored spectrophotometrically by measuring the absorbance at 652 nm. Factors affecting the reaction were studied and optimized. The stoichiometry of the reaction was determined, and the reaction pathway was postulated. The activation energy of the reaction was calculated and found to be 6.65 kJ mol^?1. Under the optimized conditions, the initial rate and fixed time (at 5 min) methods were utilized for constructing the calibration graphs. The graphs were linear in concentration ranges 5–100 and 15–150 μg ml^?1 with limit of detection of 2.0 and 5.0 μg ml^?1 for the initial rate and fixed time methods, respectively. The analytical performance for both methods was fully validated, and the results were satisfactory. No interference was observed from the excipients that are commonly present in the pharmaceutical formulations. The proposed method was successfully applied to the determination of MOXF in its pharmaceutical formulations. The label claim percentages were 101.25 ± 0.73% and 100.92 ± 0.65% for the initial rate and fixed time method, respectively. Statistical comparison of the results with those obtained by a reference spectrophotometric method showed excellent agreement between the accuracy and precision of the two methods. The proposed method has great value in its application to the analysis of MOXF in quality control laboratories.     

Copper(II)–neocuproine reagent for spectrophotometric determination of captopril in pure form and pharmaceutical formulations

A simple, rapid, sensitive and accurate spectrophotometric method for the determination of captopril in pure form and pharmaceutical formulations is developed. The procedure is based on the reaction of copper(II) with captopril in the presence of neocuproine (NC) (2,9-dimethyl-1,10-phenanthroline) reagent in acetate buffer at pH 5.0. Copper(II) is reduced easily by captopril to Cu(I)–neocuproine complex, which shows an absorption maximum at 448 nm. Beer’s law was obeyed in the concentration range 0.3–3.0 μg mL^?1 with a minimum detection limit (LOD) of 0.039 μg mL^?1 and a quantification limit (LOQ) of 0.129 μg mL^?1. For more accurate results, Ringbom optimum concentration ranges was 0.5–2.7 μg mL^?1. The apparent molar absorbtivity and Sandell sensitivity were calculated. The validity of the proposed method was tested by analyzing the pure and pharmaceutical formulations and compared well with those obtained by the official method and demonstrated good accuracy and precision.     

Kinetic spectrophotometric determination of hyoscine butylbromide in pure form and in pharmaceutical formulations

A simple and sensitive kinetic method was described for the determination of hyoscine butylbromide in pharmaceutical preparations. The method is based upon a kinetic investigation of the oxidation reaction of the drug with alkaline potassium permanganate at room temperature for a fixed time of 15 min. The absorbance of the colored manganate ion was measured at 610 nm. The absorbance–concentration plot was rectilinear over the range of 1.0–10 μg mL^?1 (r = 0.9999) and detection limit of 0.092 μg mL^?1. The concentration of hyoscine butylbromide was calculated using the corresponding calibration equation for the fixed-time method. The determination of hyoscine butylbromide by the fixed-concentration and rate constant methods is also feasible with the calibration equations obtained but the fixed-time method has been found to be more applicable. The different experimental parameters affecting the development and stability of the colors were carefully studied and optimized. The proposed method was applied to the determination of hyoscine butylbromide in pharmaceutical formulations. The results obtained were in good agreement with those obtained using the official British Pharmacopeial method (2004).     

Extraction and preconcentration of trace levels of cobalt using functionalized magnetic nanoparticles in a sequential injection lab-on-valve system with detection by electrothermal atomic absorption spectrometry

A new approach to performing extraction and preconcentration employing functionalized magnetic nanoparticles for the determination of trace metals is presented. Alumina-coated iron oxide nanoparticles were synthesized and used as the solid support. The nanoparticles were functionalized with sodium dodecyl sulfate and used as adsorbents for solid phase extraction of the analyte. Extraction, elution, and detection procedures were performed sequentially in the sequential injection lab-on-valve (SI-LOV) system followed by electrothermal atomic absorption spectrometry (ETAAS). Mixtures of hydrophobic analytes were successfully extracted from solution using the synthesized magnetic adsorbents. The potential use of the established scheme was demonstrated by taking cobalt as a model analyte. Under the optimal conditions, the calibration curve showed an excellent linearity in the concentration range of 0.01–5 μg L^?1, and the relative standard deviation was 2.8% at the 0.5 μg L^?1 level (n = 11). The limit of detection was 6 ng L^?1 with a sampling frequency of 18 h^?1. The present method has been successfully applied to cobalt determination in water samples and two certified reference materials.     

Column solid phase extraction and determination of ultra-trace Au,Pd and Pt in environmental and geological samples

A new sorbent based on cysteine modified silica gel (SiG-cys) was prepared and studied for preconcentration and separation of noble metals Au(III), Pd(II), Pt(II), Pt(IV). Its extraction efficiency was examined by batch and column solid phase extraction procedures. Laboratory experiments performed showed that sorbent is characterized with high selectivity, permiting quantitative sorption (93–97%) of noble metals Au, Pd and Pt from acidic media 0.1–2 mol L^? 1 HCl and unsignificant sorption (less than 2%) for common base metals like Cu, Fe, Mn and Zn. The analytes retained on the sorbent are effectively eluted with 0.1 mol L^? 1 thiourea in 0.1 mol L^? 1 HCl and measured by ETAAS or ICP OES under optimal instrumental parameters. The sorbent showed high mechanical and chemical stability and extraction efficiency was not changed after 500 cycles of sorption/desorption. The sorbent was successfully applied in analyticals procedures for preconcentration and determination of Au, Pd and Pt in geological and soil samples. Detection limits (3σ criteria) achieved, depending on the instrumental methods used are: ETAAS (0.005 μg L^? 1 for Au in river and sea water, 0.002 μg g^? 1 for Au in copper ore and copper concentrate); ICP OES (0.03 μg L^? 1 for Pd and 0.06 μg L^? 1 for Pt in river and sea water, 0.006 μg g^? 1 for Pd in copper ore and copper concentrate and 0.002 μg g^? 1 for soluble Pt in soil). The accuracy of the procedures developed was confirmed by added/found method for sea and river water; by the analysis of national certified materials (copper ore and copper concentrate for Au and Pd) and by determination of the sum of soluble Pt(II) + Pt(IV) in spiked soil samples.     

Determination of gallium at trace levels using a spectrofluorimetric method in synthetic U–Ga and Ga–As solutions

A simple, easy to use and selective spectrofluorimetric method for the determination of trace levels of gallium has been developed. A new Schiff base, N-o-vanillidine-2-amino-p-cresol (OVAC) was synthesized and its fluorescence activity with gallium investigated. Based on this chelation reaction, a spectrofluorimetric method has been developed for the determination of gallium in synthetically prepared Ga–U and Ga–As samples buffered at pH 4.0 using acetic acid–sodium acetate. The chelation reaction between Ga(III) and N-o-vanillidine-2-amino-p-cresol was very fast, requiring only 30 min at room temperature to complex completely. The limit of detection (LOD) (3σ) for Ga(III) was 7.17 nM (0.50 μg L^?1), determined from the analysis of 11 different solutions of 20 μg L^?1 Ga(III).     

Determination of zinc and copper in human hair by slurry sampling employing sequential multi-element flame atomic absorption spectrometry

The present work proposes a direct method based on slurry sampling for the determination of zinc and copper in human hair samples by multi-element sequential flame atomic absorption spectrometry. The slurries were prepared by cryogenic grinding and sonication of the samples. The optimization step was performed using univariate methodology and the factors studied were: nature and concentration of the acid solution, amount sample/slurry volume, sonication time, and particle size. The established experimental conditions are the use of a sample mass of 50 mg, 2 mol L^− 1 nitric acid solution, sonication time of 20 min and slurry volume of 10 mL. Adopting the optimized conditions, this method allows the determination of zinc and copper with detection limits of 88.3 and 53.3 ng g^− 1, respectively, and precision expressed as relative standard deviation (RSD) of 1.7% and 1.6% (both, n = 10) for contents of zinc and copper of 100.0 and 33.3 μg g^− 1, respectively. The accuracy was checked and confirmed by analysis of two certified reference materials of human hair. The procedure was applied for the determination of zinc and copper in two human hair samples. The zinc and copper contents varied from 100.0 to 175.6 and from 3.2 to 32.8 μg g^− 1, respectively. These samples were also analyzed after complete digestion in a closed system and determination by FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.     

On-line preconcentration/separation of inorganic arsenic and antimony by poly (aryl ether ketone) containing pendant carboxyl groups prior to microwave plasma atomic spectrometry determinations

A flow injection-column adsorption preconcentration-microwave plasma atomic emission spectrophotometric (FI-column-MP-AES) method is developed for on-line determining trace levels of inorganic arsenic and antimony released from packaging glass containers. The developed methodology involves a micro-column packed with poly (aryl ether ketone) containing pendant carboxyl groups (PEK-L) for adsorption preconcentration procedure before the determination by MP-AES. The main parameters affecting the preconcentration/separation are investigated in details. Under the optimized conditions, the detection limit of the proposed technique is 0.27 μg L^? 1 for As and 0.38 μg L^? 1 for Sb. Precisions, evaluated as repeatability of results (relative standard deviation with n = 7), are 2.8 and 1.8% respectively for As and Sb. The proposed method has been applied to different reference materials and glass bottle packaging samples with satisfactory results.     

Utilization of bromination reactions for the determination of carbamazepine using bromate–bromide mixture as a green brominating agent

One titrimetric and two spectrophotometric procedures have been developed for the assay of carbamazepine (CBZ) in bulk drug, formulations and spiked human urine. The methods are based on the bromination of CBZ by the bromine generated in situ by the action of the acid on the bromate–bromide mixture. The twin advantages of avoiding liquid bromine and analysis in a cost-effective manner are realized. In titrimetry, the drug was treated with a known excess of bromate–bromide mixture in hydrochloric acid medium followed by the determination of unreacted bromine iodometrically. Spectrophotometry involves the addition of a measured excess of bromate–bromide reagent in acid medium to CBZ, and after the reaction is ensured to be complete, the residual bromine was determined by reacting with a fixed amount of either methyl orange and measuring the absorbance at 510 nm (method A) or indigo carmine and measuring the absorbance at 610 nm (method B). Titrimetric procedure is applicable over the range of 1.00–7.50 mg CBZ, and the calculations are based on a 1:1 reaction stoichiometry (CBZ:KBrO₃). In spectrophotometric methods, Beer’s law is valid within concentration ranges of 0.25–1.50 and 0.50–6.00 μg ml⁻¹ CBZ for methods A and B, respectively. The proposed methods were successfully applied to the determination of CBZ in tablets and syrup, in addition to spiked human urine by the spectrophotometric methods, with mean recoveries of 95.50–104.0% and the results were statistically compared with those of an official method by applying Student’s t-test and F-test.