A DFT study of the adsorption and dissociation of CO on Fe(100): influence of surface coverage on the nature of accessible adsorption states.

In the present article, we report adsorption energies, structures, and vibrational frequencies of CO on Fe(100) for several adsorption states and at three surface coverages. We have performed a full analysis of the vibrational frequencies of CO, thus determining what structures are stable adsorption states and characterizing the transition-state structure for CO dissociation. We have calculated the activation energy of dissociation of CO at 0.25 ML (ML = monolayers) as well as at 0.5 ML; we have studied the dissociation at 0.5 ML to quantify the destabilization effect on the CO(alpha3) molecules when a neighboring CO molecule dissociates. In addition, it is shown that the number and nature of likely adsorption states is coverage dependent. Evidence is presented that shows that the CO molecule adsorbs on Fe(100) at fourfold hollow sites with the molecular axis tilted away from the surface normal by 51.0 degrees. The asorprton energy of the CO molecule is -2.54 eV and the C-O stretching frequency is 1156 cm(-1). This adsorption state corresponds to the alpha3 molecular desorption state reported in temperature programmed desorption (TPD) experiments. However, the activation energy of dissociation of CO(alpha3) molecules at 0.25 ML is only 1.11 eV (approximately 25.60 kcal mol(-1)) and the gain in energy is -1.17 eV; thus, the dissociation of CO is largely favored at low coverages. The activation energy of dissociation of CO at 0.5 ML is 1.18 eV (approximately 27.21 kcal mol(-1)), very similar to that calculated at 0.25 ML. However, the dissociation reaction at 0.5 ML is slightly endothermic, with a total change in energy of 0.10 eV Consequently, molecular adsorption is stabilized with respect to CO dissociation when the CO coverage is increased from 0.25 to 0.5 ML.     

CO adsorption on Ag(100) and Ag/MgO(100)

Theoretical studies of CO adsorption on a two-layer Ag(100) film and on a two-layer Ag film on a MgO(100) support are reported. Ab initio calculations are carried at the configuration interaction level of theory using embedding methods to treat the metal-adsorbate region and the extended ionic solid. The metal overlayer is considered in two different structures: where Ag-Ag distances are equal to the value in the bulk solid, and for a slightly expanded lattice in which the Ag-Ag distances are equal to the O-O distance on the MgO(100) surface. The calculated adsorption energy of Ag(100) on MgO(100) is 0.58 eV per Ag interfacial atom; the Ag-O distance is 2.28 A. A small transfer of electrons from MgO to Ag occurs on deposition of the silver overlayer. CO adsorption at an atop Ag site is found to be the most stable for adsorption on the two-layer Ag film and also for adsorption on Ag deposited on the oxide; CO adsorption energies range from 0.12 to 0.19 eV. The CO adsorption energy is reduced for the Ag/MgO system compared to adsorption on the unsupported metal film thereby providing evidence for a direct electronic effect of the oxide support at the metal overlayer surface. Expansion of the Ag-Ag distance in the two-layer system also reduces the adsorption energy.     

Dissociation kinetics of energy-selected Cp(2)Mn(+) ions studied by threshold photoelectron-photoion coincidence spectroscopy

Threshold photoelectron-photoion coincidence spectroscopy has been used to investigate the dissociation kinetics of the manganocene ion, Cp(2)Mn(+) (Cp = eta(5)-cyclopentadienyl). The Cp loss reaction was found to be extremely slow over a large ion internal energy range. By simulating the measured asymmetric time-of-flight peak shapes and breakdown diagram, the 0 K thermochemical dissociation limit for CpMn(+) production was determined to be 9.55 +/- 0.15 eV. A CpMn(+)-Cp bond energy of 3.43 eV was obtained by combining this CpMn(+) + Cp dissociation limit with the Cp(2)Mn adiabatic ionization energy of 6.12 +/- 0.07 eV. Combining the measured onset with known heats of formation of Cp and Mn(+), the Cp-Mn(+) bond energy was determined to be 3.38 +/- 0.15 eV. These results lead to 298 K heats of formation of Cp(2)Mn(+) and CpMn(+) of 863 +/- 7 and 935 +/- 16 kJ/mol, respectively. Finally, by combining these results with a previous measurement of the CpMn(CO)(3) --> CpMn(+) + 3CO + e(-) dissociation limit, we arrive at a new value for Delta(f)H degrees (298K)(CpMn(CO)(3)) of -424 +/- 17 kJ/mol.     

Energetics of cyclohexene adsorption and reaction on Pt(111) by low-temperature microcalorimetry

The heat of adsorption and sticking probability of cyclohexene on Pt(111) were measured as a function of coverage using single-crystal adsorption calorimetry in the temperature range from 100 to 300 K. At 100 K, cyclohexene adsorbs as intact di-sigma bonded cyclohexene on Pt(111), and the heat of adsorption is well described by a second-order polynomial (130 - 47 theta - 1250 theta(2)) kJ/mol, yielding a standard enthalpy of formation of di-sigma bonded cyclohexene on Pt(111) at low coverages of -135 kJ/mol and a C-Pt sigma bond strength of 205 kJ/mol. At 281 K, cyclohexene dehydrogenates upon adsorption, forming adsorbed 2-cyclohexenyl (c-C6H(9,a)) and adsorbed hydrogen, and the heat of adsorption is well described by another second-order polynomial (174 - 700 theta + 761 theta(2)) kJ/mol. This yields a standard enthalpy of formation of adsorbed 2-cyclohexenyl on Pt(111) at a low coverage of -143 kJ/mol. At coverages below 0.10 ML, the sticking probability of cyclohexene on Pt(111) is close to unity (>0.95), independent of temperature.     

The dissociation kinetics of energy-selected CpMn(CO)(3)(+) ions studied by threshold photoelectron-photoion coincidence spectroscopy

Threshold photoelectron-photoion coincidence spectroscopy has been used to investigate the dissociation kinetics of the cyclopentadienyl manganese tricarbonyl ion, CpMn(CO)(3)(+). The ionization energy of CpMn(CO)(3) was measured from the threshold photoelectron spectrum to be 7.69 +/- 0.02 eV. The dissociation of the CpMn(CO)(3)(+) ion proceeds by the sequential loss of three CO molecules. The first and third CO loss reactions were observed to be slow (lifetimes in the microsecond range). By simulating the resulting asymmetric time-of-flight peak shapes and breakdown diagram, 0 K onsets for three product ions were determined to be 8.80 +/- 0.04, 9.43 +/- 0.04, and 10.51 +/- 0.06 eV, respectively. Combined with the adiabatic ionization energy, the three successive Mn-CO bond energies in the CpMn(CO)(3)(+) were found to be alternating with values of 1.11 +/- 0.04, 0.63 +/- 0.04, and 1.08 +/- 0.06 eV, respectively. Using a scaled theoretical Cp-Mn(+) bond energy of 3.10 +/- 0.10 eV and the combined results from theory and experiment, the 298 K gas-phase heat of formation of CpMn(CO)(3) is suggested to be -419 +/- 15 kJ/mol. Based on this value, the 298 K heats of formation of CpMn(CO)(3)(+), CpMn(CO)(2)(+), CpMnCO(+), and CpMn(+) are 325 +/- 15, 546 +/- 15, 719 +/- 15, and 938 +/- 15 kJ/mol, respectively. By scaling theoretical calculated neutral bond energies with the experimental information derived in this study, the successive Mn-CO bond energies were estimated to be 1.88, 1.10, and 1.03 eV, respectively, while the Cp-Mn bond energy was found to be 2.16 eV. Comparison between the quantum chemical calculations and experimental values shows that the loss of CO groups follows the lowest energy adiabatic path, in which electronic spin on the metal center is not conserved.     

Thermodynamic analysis of the temperature dependence of OH adsorption on Pt(111) and Pt(100) electrodes in acidic media in the absence of specific anion adsorption

The effect of temperature on the voltammetric OH adsorption on Pt(111) and Pt(100) electrodes in perchloric acid media has been studied. From a thermodynamic analysis based on a generalized adsorption isotherm, DeltaG degrees , DeltaH degrees , and DeltaS degrees values for the adsorption of OH have been determined. On Pt(111), the adsorption enthalpy ranges between -265 and -235 kJ mol(-1), becoming less exothermic as the OH coverage increases. These values are in reasonable agreement with experimental data and calculated values for the same reaction in gas phase. The adsorption entropy for OH adsorption on Pt(111) ranges from -200 J mol(-1) K(-1) (low coverage) to -110 J mol(-1) K(-1) (high coverage). On the other hand, the enthalpy and entropy of hydroxyl adsorption on Pt(100) are less sensitive to coverage variations, with values ca. DeltaH degrees = -280 kJ mol(-1) and DeltaS degrees = -180 J mol(-1) K(-1). The different dependence of DeltaS degrees with coverage on both electrode surfaces stresses the important effect of the substrate symmetry on the mobility of adsorbed OH species within the water network directly attached to the metal surface.     

Electron energy loss studies of room-temperature co adsorption on Cu(100) induced by electron or ion irradiation

A custom-built multi-technique portable spectrometer was used to study the vibrational (and electronic) excitations associated with the “anomalous” CO adsorption recently observed on clean and oxidized Cu(100) surfaces at room temperature. Results from the electron energy loss (and thermal desorption) experiments have provided strong evidence for in-situ CO production induced by low-energy electron or ion irradiation of CO or C₂H₄ on Cu(100). In particular, the C-O vibrational stretch frequency for the room-temperature CO adsorption was found to be red-shifted by 9 meV from its nominal position (259 meV) and could be observed even at temperature as high as 420 K. Several plausible mechanisms involving coadsorbate interactions with CO on metal surfaces have been discussed. A direct interaction model involving partial bonding between CO, adsorbed on an atop site, and a coadsorbed O atom in a four-fold hollow site was found to be adequate in explaining the observed red shift and the apparent stabilization of CO on Cu(100) at room temperature.     

Mechanisms of and effect of coadsorption on water dissociation on an oxygen vacancy of the MgO(100) surface

The dissociation mechanism of a water molecule at an oxygen vacancy on the MgO(100) surface was studied by using the embedded cluster method at the DFT/B3 LYP level, while the energetic information was refined by using the IMOMO method at the CCSD level. We found that a water molecule initially adsorbs on one of the magnesium ions surrounding the vacancy site with a binding energy of 15.98 kcal mol(-1). It then can dissociate on the MgO(100) surface along two possible dissociation pathways. One pathway produces a hydroxyl group bonded to the original magnesium with a proton filling the vacancy via a transition state with a barrier of 4.67 kcal mol(-1) relative to the adsorbed water configuration. The other pathway yields two hydroxy groups; the hydroxy group originally belonging to the water molecule fills the vacancy, while the hydrogen atom binds with the surface oxygen to form the other hydroxy group. Hydrogen atoms of these hydroxy groups can recombine to form a hydrogen molecule and the surface is healed. Although the barrier (14.09 kcal mol(-1)) of the rate-controlling step of the latter pathway is higher than that of the former one, the energies of all of its stationary points are lower than that of the separated reactants (H(2)O+cluster). The effects of water coadsorption are modeled by placing an additional water molecule near the active center, which suggests that the more coadsorbed water molecules further stabilize the hydroxy species and prevent the hydrogen molecule formation through the latter pathway. The results support the photoemission spectral evidence of water dissociation on the defective MgO(100) surface at low water coverage.     

A photoelectron and TPEPICO investigation of the acetone radical cation

The valence shell photoelectron spectrum, threshold photoelectron spectrum, and threshold photoelectron photoion coincidence (TPEPICO) mass spectra of acetone have been measured using synchrotron radiation. New vibrational progressions have been observed and assigned in the X 2B2 state photoelectron bands of acetone-h6 and acetone-d6, and the influence of resonant autoionization on the threshold electron yield has been investigated. The dissociation thresholds for fragment ions up to 31 eV have been measured and compared to previous values. In addition, kinetic modeling of the threshold region for CH3* and CH4 loss leads to new values of 78 +/- 2 kJ mol(-1) and 75 +/- 2 kJ mol(-1), respectively, for the 0 K activation energies for these two processes. The result for the methyl loss channel is in reasonable agreement with, but slightly lower than, that of 83 +/- 1 kJ mol(-1) derived in a recent TPEPICO study by Fogleman et al. The modeling accounts for both low-energy dissociation channels at two different ion residence times in the mass spectrometer. Moreover, the effects of the ro-vibrational population distribution, the electron transmission efficiency, and the monochromator band-pass are included. The present activation energies yield a Delta(f)H298 for CH3CO+ of 655 +/- 3 kJ mol(-1), which is 4 kJ mol(-1) lower than that reported by Fogleman et al. The present Delta(f)H298 for CH3CO+ can be combined with the Delta(f)H298 for CH2CO (-47.5 +/- 1.6 kJ mol(-1)) and H+ (1530 kJ mol(-1)) to yield a 298 K proton affinity for ketene of 828 +/- 4 kJ mol(-1), in good agreement with the value (825 kJ mol(-1)) calculated at the G2 level of theory. The measured activation energy for CH4 loss leads to a Delta(f)H298 (CH2CO+*) of 873 +/- 3 kJ mol(-1).     

The influence of promoters and poisons on carbon monoxide adsorption on Rh(100): a DFT study.

Density functional theory calculations were performed to determine the pairwise lateral interaction energies between carbon monoxide and coadsorbed elements from the first three rows of the periodic table on a Rh(100) surface. The atoms were placed in a c(2x2) arrangement of fourfold hollow sites and the carbon monoxide probe molecule in a p(2x2) arrangement, so that each CO molecule had four atoms as nearest neighbours. The alkali atoms show an attractive interaction with CO while the other atoms show a repulsive interaction. For second-row elements the maximum repulsion is at nitrogen and for third-row elements at sulphur. Attempts to correlate the interaction energies with properties of the system, such as electronegativity, distances, or change in work function, failed, which implies that each combination of adsorbates needs to be calculated separately.     

CO-NO and CO-O(2) interactions on Cu(100) between 25 and 200 K studied with infrared reflection absorption spectroscopy

Infrared reflection absorption spectroscopy (IRAS) has been used to study CO-NO and CO-O(2) interactions on Cu(100) between 25 and 200 K. A strong repulsive interaction between CO and NO on Cu(100) at 25 K causes tilting of the CO molecules away from the surface normal and a blue-shift of the CO vibrational frequency. Upon warming and decomposition of the NO, the CO molecules return to a bonding position normal to the surface plane. The vibrational frequency of CO blue-shifts from 2087 to 2136 cm(-1) upon coadsorption with N and O atoms formed from NO decomposition. On the other hand, the interaction of CO with O(2) at 27 K on Cu(100) in the submonolayer regime induces a red-shift of the CO vibrational frequency. Atomic oxygen, formed on Cu(100) by dissociation of O(2) at 95 K, induces a blue-shift of the vibrational frequency of coadsorbed CO to 2116 cm(-1). The CO vibrational frequency shifts to 2091 cm(-1) when the surface is annealed to 140 K, implying a change in the adsorption geometry of the oxygen atoms on Cu(100).     

Calcium adsorption on MgO(100): energetics, structure, and role of defects

The adsorption of Ca on the MgO(100) surface at 300 K has been studied using microcalorimetry, in combination with LEED, AES, ISS, work function, sticking probability measurements, and density functional theory (DFT) calculations. The MgO(100) thin films (approximately 4 nm thick) were grown epitaxially on a 1 microm thick Mo(100) single-crystal. The sticking probability of Ca on MgO(100) at 300 K is unity. On the basis of AES and ISS measurements, it was determined that Ca grows mainly as 3D particles on the MgO(100) surface with a density of approximately 1 x 10(12) islands/cm2. Ca adsorbs initially at defect sites with a very high heat of adsorption (approximately 410 kJ/mol). DFT calculations attribute this high initial heat to Ca binding to kink sites (376 kJ/mol), step sites (205 kJ/mol), and lower concentrations of stronger binding sites. The heat of adsorption decreases rapidly with coverage, reaching a minimum of 162 kJ/mol at approximately 0.3 ML, where Ca is mainly adding to small 3D Ca clusters. Afterward, it increases to the value of bulk Ca heat of sublimation (178 kJ/mol) at approximately 1.2 ML, attributed to the increase in stability with increasing Ca particle size. A 1.0 eV decrease of the work function with Ca coverage from 0 to 0.3 ML indicates that Ca adsorbed at defects is cationic, in agreement with calculations showing that Ca donates electron density to the MgO. Light ion sputtering of the MgO(100) surface generates point defects, but these do not change the heat of adsorption versus coverage, implying that they do not nucleate Ca particles. Oxygen vacancies are a likely candidate; DFT calculations show that F and F+ center vacancies bind Ca more weakly than terrace sites. More extensive sputtering creates extended defects (such as steps and kinks) that adsorb Ca with heats of adsorption up to approximately 400 kJ/mol, similar to that at the intrinsic defect sites.     

Pd(Cu)在MgO(100)表面吸附CO和O2的理论研究

采用固体镶嵌势能模型和DFT/B3LYP方法研究了在Pd/MgO和Cu/MgO表面吸附CO和O₂分子的电子性质. 计算结果表明, 在完美MgO(100)表面Pd原子对CO和O₂的吸附能分别为206.5和84.8 kJ/mol, 因此可知Pd原子更容易吸附CO分子; 而当Pd原子附着于有氧缺陷的MgO表面时, 它对两种分子的吸附都非常弱. 相反, 附着于MgO表面的Cu原子对O₂分子的吸附更为有利, 其吸附能在140～155 kJ/mol之间. 研究结果还表明, 对于双分子吸附体系, 即CO＋CO, CO＋O₂, O₂＋O₂体系, 双分子之间的结合力可减小完美MgO表面上Pd原子与被吸附分子的相互作用, 使吸附能减少了46～96 kJ/mol. 而对于在MgO表面上的Cu原子, 只有O₂＋O₂ 体系使吸附能减少了大约50～71 kJ/mol.     

Direct determination of the ionization energies of PtC, PtO, and PtO2 with VUV radiation

Photoionization efficiency curves were measured for gas-phase PtC, PtO, and PtO2 using tunable vacuum ultraviolet (VUV) radiation at the Advanced Light Source. The molecules were prepared by laser ablation of a platinum tube, followed by reaction with CH4 or N2O and supersonic expansion. These measurements provide the first directly measured ionization energy for PtC, IE(PtC) = 9.45 +/- 0.05 eV. The direct measurement also gives greatly improved ionization energies for the platinum oxides, IE(PtO) = 10.0 +/- 0.1 eV and IE(PtO2) = 11.35 +/- 0.05 eV. The ionization energy connects the dissociation energies of the neutral and cation, leading to greatly improved 0 K bond dissociation energies for the neutrals: D0(Pt-C) = 5.95 +/- 0.07 eV, D0(Pt-O) = 4.30 +/- 0.12 eV, and D0(OPt-O) = 4.41 +/- 0.13 eV, as well as enthalpies of formation for the gas-phase molecules DeltaH(0)(f,0)(PtC(g)) = 701 +/- 7 kJ/mol, DeltaH(0)(f,0)(PtO(g)) = 396 +/- 12 kJ/mol, and DeltaH(0)(f,0)(PtO2(g)) = 218 +/- 11 kJ/mol. Much of the error in previous Knudsen cell measurements of platinum oxide bond dissociation energies is due to the use of thermodynamic second law extrapolations. Third law values calculated using statistical mechanical thermodynamic functions are in much better agreement with values obtained from ionization energies and ion energetics. These experiments demonstrate that laser ablation production with direct VUV ionization measurements is a versatile tool to measure ionization energies and bond dissociation energies for catalytically interesting species such as metal oxides and carbides.     

Cu(100)表面HCOO对CO2吸附的稳定作用

采用广义梯度近似(GGA)的密度泛函理论(DFT)(DFT-GGA)并结合平板模型, 研究了CO2在HCOO 修饰Cu(100)表面的吸附行为. 计算结果表明, 与清洁Cu(100)表面相比较, CO2在HCOO修饰的Cu(100)表面的吸附强度增强, 其线性对称性不存在. 究其原因可归结为HCOO的存在使CO2分子带有部分极性, 从而使其与Cu(100)表面的作用增强.     

In situ infrared reflection absorption spectroscopy of carbon monoxide adsorbed on Pt(S)-[n(100)x(110)] electrodes

Structural effects on the adsorption of CO have been studied using infrared reflection absorption spectroscopy (IRAS) on Pt(S)-[n(100)x(110)] surfaces (n = 2, 5, 9) that have densely packed kink atoms in the step. Coverage and potential dependence of the IRAS spectra are scrutinized. On-top and bridge-bonded CO are found on all of the surfaces examined. CO is adsorbed on only kink at low coverage (thetaCO < or = 0.2). Adsorbed CO on kink gives an IR band at lower frequency than that on step. CO is adsorbed on both kink and terrace at 0.3 < or = thetaCO. Water is adsorbed on the terrace of Pt(510) n = 5 and Pt(910) n = 9 at low CO coverage, but water is not found on Pt(210) n = 2 of which the first layer is composed of only kink atoms. It is suggested that coadsorbed water on the terrace enhances the activity for the oxidation of adsorbed CO on the kink remarkably.     

Methanation of CO over nickel: Mechanism and kinetics at high H2/CO ratios

The CO methanation reaction over nickel was studied at low CO concentrations and at hydrogen pressures slightly above ambient pressure. The kinetics of this reaction is well described by a first-order expression with CO dissociation at the nickel surface as the rate-determining step. At very low CO concentrations, adsorption of CO molecules and H atoms compete for the sites at the surface, whereas the coverage of CO is close to unity at higher CO pressures. The ratio of the equilibrium constants for CO and H atom adsorption, K(CO)/K(H), was obtained from the rate of CO methanation at various CO concentrations. K(H) was determined independently from temperature programmed adsorption/desorption of hydrogen to be K(H) = 7.7 x 10(-4) (bar(-0.5)) exp[43 (kJ/mol)/RT] and hence the equilibrium constants for adsorption of CO molecules may be calculated to be K(CO) = 3 x 10(-7) (bar(-1)) exp[122 (kJ/mol)/RT]. Furthermore, the rate of dissociation of CO at the catalyst surface was determined to be 5 x 10(9) (s(-1)) exp[-96.7 (kJ/mol)/RT] assuming that 5% of the surface nickel atoms are active for CO dissociation. The results are compared to equilibrium and rate constants reported in the literature.     

Heat of adsorption of naphthalene on Pt(111) measured by adsorption calorimetry

The heat of adsorption of naphthalene on Pt(111) at 300 K was measured with single-crystal adsorption calorimetry. The heat of adsorption on the ideal, defect-free surface is estimated to be (300 - 34 - 199(2)) kJ/mol. From this, a C-Pt bond energy for aromatic hydrocarbons on Pt(111) of approximately 30 kJ/mol is estimated, consistent with earlier results for benzene on Pt(111). There is higher heat of adsorption at very low coverage, attributed to step sites where the adsorption heat is >/=330 kJ/mol. Saturation coverage, = 1 ML, corresponds to 1.55 x 10(14) molecules/cm(2). Sticking probability measurements of naphthalene on Pt(111) give a high initial value of 1.0 and a Kisliuk-type coverage dependence that implies precursor-mediated sticking. The ratio of the hopping rate to the desorption rate of this precursor is approximately 51. Naphthalene adsorbs transiently on top of chemisorbed naphthalene molecules with a heat of adsorption of 83-87 kJ/mol.     

Adsorption and activation of CO over flat and stepped Co surfaces: a first principles analysis

The adsorption and activation of CO over flat Co{0001}, corrugated Co{1120}, and stepped Co{1012} and Co{1124} surfaces have been analyzed using periodic density functional theory calculations. CO strongly chemisorbs on all these surfaces but does not show a strong dependence on the surface structure. The calculated structure of adsorbed CO on Co{0001} at 1/3 monolayer (ML) of coverage was found to be in good agreement with the experiment. The barrier for CO dissociation over Co{0001} was found to decrease with decreasing CO coverage, taking on a value of 232 kJ/mol at 1/4 ML and 218 kJ/mol at 1/9 ML. The presence of the "zigzag" channel on Co{1120} enhances the reactivity slightly by reducing the barrier for CO dissociation to 195 kJ/mol. In contrast, the stepped Co{1012} and Co{1124} surfaces are much more active than the flat and corrugated surfaces. Both stepped surfaces provide direct channels for CO dissociation that do not have barriers with respect to gas-phase CO. In general the activation barriers lower as the reaction energies become more exothermic. Reconstruction of the step edges that occur in the product state, however, prevents a linear correlation between the reaction energy and the activation energy.     

Underpotential deposition of hydrogen on benzene-modified Pt(111) in aqueous H2SO4

The Pt(111) electrode is modified by an overlayer of C6H6 (ads) upon its cycling in the 0.05-0.80 V range in aq H2SO4 + 1 mM C6H6. The C6H6 (ads) overlayer significantly changes the underpotential-deposited H (H(UPD)) and anion adsorption, and cyclic-voltammetry (CV) profiles show a sharp cathodic peak and an asymmetric anodic one in the 0.05-0.80 V potential range. The C6H6 (ads) layer blocks the (bi)sulfate adsorption but facilitates the adsorption of one monolayer of H(UPD). Cycling of the benzene-modified Pt(111) in benzene-free aq 0.05 H2SO4 from 0.05 to 0.80 V results in a partial desorption of C6H6 (ads) and in a partial recovery of the CV profile characteristic of an unmodified Pt(111). The peak potential of the cathodic and anodic feature is independent of the scan rate, s (10 < or = s < or = 100 mV s(-1)), and the peak current density increases linearly with an increase of the scan rate. Temperature variation modifies the peak potential and current density but does not affect the charge density of the cathodic or anodic feature. Temperature-dependent studies allow us to determine the thermodynamic state function for the H(UPD) adsorption and desorption. Delta G degrees(ads)(H(UPD))assumes values from -4 to -12 kJ mol(-1), while has values from 9 to 14 kJ mol(-1). The values of delta Delta G degrees (delta Delta G degrees = delat Delta G degrees(ads) + delta Delta D degrees(des)) decrease almost linearly from 6 kJ mol(-1) at theta(H(UPD) --> 0 to 0 kJ mol(-1) at theta(H(UPD) --> 1. The nonzero values of delta Delta G degrees testify that the adsorbing and desorbing H(UPD) adatoms interact with an energetically different substrate. The lateral interactions changed from repulsive (omega = 29 kJ mol(-1) at theta(H(UPD) --> 0) to attractive (omega = -28 kJ mol(-1) at theta(H(UPD) --> 1) as the H(UPD) coverage increases. The values of delta S degrees(ads)(H(UPD)) increase from 19 to 56 J K(-1) mol(-1), while those of delta S degrees(des)(H(UPD)) decrease from 45 to -30 J K(-1) mol(-1) with an increase of H(UPD) coverage. The values of delta H degrees(des)(H(UPD)) and delta H degrees(des)(H(UPD)) vary from 0 to 27 kJ mol(-1). The Pt(111)-H(UPD) surface bond energy at the benzene-modified Pt(111) electrode falls in the 191-218 kJ mol(-1) range and is weaker than in the case of the unmodified Pt(111) electrode in the same electrolyte.