Investigation of luminescence spectra of the Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> and Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Ce single-crystal films

The luminescence spectra of single-crystal films and bulk crystals of yttrium-aluminum garnet Y₃Al₅O₁₂ and Ce³⁺-activated Y₃Al₅O₁₂ were investigated. It was shown that the room-temperature luminescence intensity of the Ce³⁺-free single-crystal Y₃Al₅O₁₂ film was considerably lower than that of the bulk crystals, while the luminescence intensity of the Ce³⁺ ions in the Y₃Al₅O₁₂:Ce films was considerably higher than that one for the corresponding bulk crystal.     

Luminescence of excitons and antisite defects in Lu<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Ce single crystals and single-crystal films

The luminescence of excitons and antisite defects (ADs) was investigated, as well as the specific features of the excitation energy transfer from excitons and ADs to the activator (Ce³⁺ ion) in phosphors based on Lu₃Al₅O₁₂:Ce (LuAG:Ce) single crystals and single-crystalline films, which are characterized by significantly different concentrations of ADs of the Lu _Al ³⁺ type and vacancy-type defects. The luminescence band with λ_max = 249 nm in LuAG:Ce single-crystal films is due to the luminescence of self-trapped excitons (STEs) at regular sites of the garnet lattice. The excited state of STEs is characterized by the presence of two radiative levels with significantly different transition probabilities, which is responsible for the presence of two excitation bands with λ_max = 160 and 167 nm and two components (fast and slow) in the decay kinetics of the STE luminescence. In LuAG:Ce single crystals, in contrast to single-crystal films, the radiative relaxation of STEs in the band with λ_max = 253.5 nm occurs predominantly near Lu _Al ³⁺ ADs. The intrinsic luminescence of LuAG:Ce single crystals at 300 K in the band with λ_max = 325 nm (τ = 540 ns), which is excited in the band with λ_max = 175 nm, is due to the radiative recombination of electrons with holes localized near Lu _Al ³⁺ ADs. In LuAG:Ce single crystals, the excitation of the luminescence of Ce³⁺ ions occurs to a large extent with the participation of ADs. As a result, slow components are present in the luminescence decay of Ce³⁺ ions in LuAG:Ce single crystals due to both the reabsorption of the UV AD luminescence in the 4f-5d absorption band of Ce³⁺ ions with λ_max = 340 nm and the intermediate localization of charge carriers at ADs and vacancy-type defects. In contrast to single crystals, in phosphors based on LuAG:Ce single-crystal films, the contribution of slow components to the luminescence of Ce³⁺ ions is significantly smaller due to a low concentration of these types of defects.     

Synthesis and characterization of mono-dispersed Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Er<Superscript>3+</Superscript>-coated SiO<Subscript>2</Subscript> nanoparticles by co-precipitation process

In this paper, a facile co-precipitation process for preparing mono-dispersed core–shell structure nanoparticles is reported. The 110 nm SiO₂ cores coated with an yttrium aluminum garnet (Y₃Al₅O₁₂) layer doped with Er³⁺ were synthesized and the influence of the concentration ratio of [urea]/[metal ions] on the final product was investigated. The structure and morphology of samples were characterized by the X-ray powder diffraction, Fourier transform IR spectroscopy and transmission electron microscopy, respectively. The results indicate that a layer of well-crystallized garnet Y₃Al₅O₁₂:Er³⁺ were successfully coated on the silica particles with the thickness of 20 nm. The near infrared and upconversion luminescent spectra of the SiO₂@Y₃Al₅O₁₂:Er³⁺ powders further confirm that a Y₃Al₅O₁₂:Er³⁺ coating layer has formed on the surface of silica spherical particles.     

Luminescence properties of phosphors based on Tb<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> (TbAG) terbium-aluminum garnet

The processes of excitation energy transfer in phosphors based on single-crystal Tb₃Al₅O₁₂:Ce (TbAG:Ce) and Tb₃Al₅O₁₂:Ce,Eu (TbAG:Ce,Eu) garnet films have been investigated. These films are considered to be promising materials for screens for X-ray images and luminescence converters of blue LED radiation. The conditions for excitation energy transfer from the matrix (Tb³⁺ cations) to Ce³⁺ and Eu³⁺ ions in TbAG:Ce and TbAG:Ce,Eu phosphors have been analyzed in detail. It is established that a cascade process of excitation energy transfer from Tb³⁺ ions to Ce³⁺ and Eu³⁺ ions and from Ce³⁺ ions to Eu³⁺ ions is implemented in TbAG:Ce,Eu via dipole-dipole interaction and through the Tb³⁺ cation sublattice.     

Crystal growth,spectroscopic and CW laser properties of Nd<Subscript>0.03</Subscript>Lu<Subscript>2.871</Subscript>Gd<Subscript>0.099</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> crystal

Nd_0.03Lu_2.871Gd_0.099Al₅O₁₂ (Nd:LuGdAG) crystal was grown by the Czochralski method. The absorption, fluorescence spectra and fluorescence lifetime of Nd:LuGdAG crystal at room temperature were investigated for the first time. We reported the continuous-wave (CW) Nd:LuGdAG laser operation under diode pumping. Output power of 1.43 W at 1064 nm was achieved with a slope efficiency of 34.1%. All the results show that Nd:LuGdAG crystal is a promising laser material.     

Effect of sintering temperature of Ce<Superscript>3+</Superscript>-doped Lu<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> phosphors on light emission and properties of crystal structure for white-light-emitting diodes

The effect of the sintering temperature of Ce³⁺-doped Lu₃Al₅O₁₂ (Ce-LuAG) phosphors on the emission and properties of the crystal structure was studied. A cathodoluminescence peak at 317 nm, which was assigned to lattice defects, was exhibited in addition to emission peaks at 508 and 540 nm for the Ce-LuAG phosphors. The intensities of the 317 nm emission peak for the phosphors with mean particle diameters of 5.0 and 10.0 µm formed at a low sintering temperature of 1430 °C were higher than those for the phosphors with mean particle diameters of 18.0 and 20.5 µm formed at a high sintering temperature of 1550 °C. In contrast, the electroluminescence spectra for fabricated white-light-emitting diodes (LEDs) using the phosphors revealed that the intensity of the peak at 540 nm was strong for the mean particle diameters of 18.0 and 20.5 µm. The intensity of the 540 nm peak, which is attributed to the 4f→5d transition of the Ce³⁺ activator, showed a dependence on the sintering temperature. The relationship between the optical properties and the lattice defects is discussed.     

Zeeman effect and stark splitting of the electronic states of the rare-earth ion in the paramagnetic terbium garnets Tb<Subscript>3</Subscript>Ga<Subscript>5</Subscript>O<Subscript>12</Subscript> and Tb<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>

The Zeeman effect in the ⁷ F ₆ → ⁵ D ₄ absorption band of the Tb³⁺ ion in the paramagnetic garnets Tb₃Ga₅O₁₂ and Tb₃Al₅O₁₂ was studied. The field dependences of the Zeeman splitting of some absorption lines are found to exhibit unusual behavior: as the magnetic field increases, the band splitting decreases rather than increases. Symmetry analysis relates these lines to 4f → 4f electron transitions of the doublet-quasi-doublet or quasi-doublet-doublet type, for which the field dependences of the splitting differ radically from the well-known field dependences of the Zeeman splitting for quasi-doublet-quasi-doublet or quasi-doublet-singlet transitions in a longitudinal magnetic field.     

Sensitizer-dependent up-conversion of Ho<Superscript>3+</Superscript> in nanocrystalline Y<Subscript>2</Subscript>O<Subscript>3</Subscript>

Ho³⁺–Yb³⁺ co-doped Y₂O₃ nanocrystals were synthesized by firing hydroxy carbonate precursors. Yb³⁺-concentration-dependent up-conversion properties of Ho³⁺ in Y₂O₃ nanocrystals have been investigated. The relative intensity of up-converted red emission increases more quickly than that of the green and the near-infrared ones with the enhancement of the concentration of Yb³⁺. It is believed that the energy process ⁵ S ₂ (⁵F₄) (Ho) + ⁵ I ₇ (Ho) →⁵ I ₆ (Ho)+⁵ F ₅ (Ho) plays an important role in the population of the ⁵ F ₅ level of Ho³⁺. The result indicates that the intensity ratio of the green emission to the red one can be tuned by changing the sensitizer concentration. PACS 78.55.-m     

Luminescence and scintillation properties of Y<Subscript>3</Subscript>A<Subscript>l5</Subscript>O<Subscript>12</Subscript>:Ce single crystals and single-crystal films

Luminescence and scintillation properties of Y₃A_l5O₁₂:Ce single crystals grown from the melt by the Czochralski and horizontal directed crystallization methods in various gas media and Y₃A_l5O₁₂:Ce single-crystal films grown by liquid-phase epitaxy from a melt solution based on a PbO-B₂O₃ flux have been comparatively analyzed. The strong dependence of scintillation properties of Y₃A_l5O₁₂:Ce single crystals on their growth conditions and concentrations of Y_Al antisite defects and vacancy defects has been established. Vacancy defects are involved in Ce³⁺ ion emission excitation as the centers of intrinsic UV luminescence and trapping centers. It has been shown that Y₃A_l5O₁₂:Ce single-crystal films are characterized by faster scintillation decay kinetics than single crystals and a lower content of slow components in Ce³⁺ ion luminescence decay during high-energy excitation due to the absence of Y_Al antisite defects in them and low concentration of vacancy defects. At the same time, the light yield of Y₃A_l5O₁₂:Ce single-crystal films is comparable to that of single crystals grown by directed crystallization due to the quenching effect of the Pb²⁺ ion impurity as a flux component and is slightly lower (∼25%) than the light yield of single crystals grown by the Czochralski method.     

Up-conversion emissions of Er<Superscript>3+</Superscript>-Yb<Superscript>3+</Superscript> codoped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles by the arc discharge synthesis method

The Er³⁺-Yb³⁺ codoped Al₂O₃ nanoparticles with an average particle size of about 50 nm have been synthesized by an arc discharge synthesis method. The green and red up-conversion emissions centered at about 526, 547 and 677 nm, corresponding respectively to the ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978-nm semiconductor laser diode excitation. The Annealing has evident effect on the up-conversion emissions of the samples: The red up-conversion emission is noticeable before annealing; however, the green up-conversion emission becomes predominant after annealing. The mixture of (Er,Yb)₃Al₅O₁₂ and α-(Al,Er,Yb)₂O₃ phases is more favorable for green up-conversion emissions due to an enhancement of the ESA (I) of ⁴I_11/2+a photon→⁴F_7/2 and ET (III) of ²F_5/2(Yb³⁺)+⁴I_11/2(Er³⁺)→²F_7/2(Yb³⁺)+⁴F_7/2(Er³⁺) processes. The two-photon absorption up-conversion process is involved in the green and red up-conversion emissions. The results have proved that arc discharge synthesis is a new promising preparation technology for optical materials. Supported by National Natural Science Foundation of China (Grant No. 10804015), the Scientific Research Foundation for Doctor of Liaoning Province (Grant No. 20071095), and the Educational Committee Foundation of Liaoning Province (Grant No. 2008123)     

Optical absorption by Nd<Superscript>3+</Superscript> and Gd<Superscript>3+</Superscript> ions in epitaxial films grown on Gd<Subscript>3</Subscript>Ga<Subscript>5</Subscript>O<Subscript>12</Subscript> substrates from a lead-containing solution melt

Epitaxial films of composition (Gd,Nd)₃Ga₅O₁₂ or (Gd,Y,Nd)₃Ga₅O₁₂ with a neodymium content varying from 0.3 to 15 at. % are grown by liquid-phase epitaxy from a supercooled PbO-B₂O₃-based solution melt on Gd₃Ga₅O₁₂(111) substrates. The optical absorption spectra of the epitaxial films grown are measured in the wavelength range 0.2–1.0 µm. The results of interpreting the absorption bands observed in the spectra are used to construct the energy level diagrams of Nd³⁺ and Gd³⁺ ions in the matrices of the epitaxial films.     

Tunable optical parametric oscillator based on a KTP crystal,pumped by a pulsed Ti<Superscript>3+</Superscript>:Al<Subscript>2</Subscript>O<Subscript>3</Subscript> laser

We present the characteristics of an optical parametric oscillator based on a KTP crystal, pumped with noncritical phase matching by a pulsed Ti³⁺:Al₂O₃ laser, tunable in the range 677–970 nm. Tunable generation of signal and idler waves is obtained in the ranges 1030–1390 nm and 2690–3050 nm respectively. The efficiency of conversion of the pump to the signal wave is ≈23%, which for pulses of duration ≈8 nsec ensures an energy in the range 1.0–11.5 mJ. The width of the emission spectrum for the signal wave is within the range 0.8–1.8 nm and is predominantly determined by the linewidth of the Ti³⁺:Al₂O₃ pump laser. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 3, pp. 351–356, May–June, 2007.     

Synthesis and magnetic properties of FeNi<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> core-shell nanocomposites

In this study, FeNi₃/Al₂O₃ core-shell nanocomposites, where individual FeNi₃ nanoparticles were coated with a thin layer of alumina, were fabricated by a modified sol-gel method. Several physical characterizations were performed on the samples of FeNi₃/Al₂O₃ nanocomposites with different thickness of Al₂O₃ shell. The encapsulation of FeNi₃ nanoparticles with alumina stops FeNi₃ agglomeration during heat treatment, and prevents interaction among the closely spaced magnetic FeNi₃ nanoparticles. The Al₂O₃ insulating shell improves the soft magnetic properties of FeNi₃. The study of the complex permeability of the samples shows that the real part μ’ of the permeability of the sample with Al molar content of 20% (Al/(Fe+Ni)) is as high as 12, and independent of frequency up to at least 1 GHz. The tunneling magnetoresistance arising from the presence of the Al₂O₃ shell have also been studied.     

The effective reinforcement of magnesium alloy ZK60A using Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

ZK60A nanocomposite containing Al₂O₃ nanoparticle reinforcement (50 nm average size) was fabricated using solidification processing followed by hot extrusion. The nanocomposite exhibited similar grain size to the monolithic alloy, reasonable Al₂O₃ nanoparticle distribution, non-dominant (0 0 0 2) texture in the longitudinal direction, and 15% higher hardness than the monolithic alloy. Compared to the monolithic alloy (in tension), the nanocomposite exhibited lower yield strength (0.2%TYS) (−4%) and higher ultimate strength (UTS), failure strain, and work of fracture (WOF) (+13%, +170%, and +200%, respectively). Compared to the monolithic alloy (in compression), the nanocomposite exhibited lower yield strength (0.2%CYS) (−5%) and higher ultimate strength (UCS), failure strain, and WOF (+6%, +41%, and +43%, respectively). The effects of Al₂O₃ nanoparticle addition on the enhancement of tensile and compressive properties of ZK60A are investigated in this article.     

Domain dynamics in (210)-oriented single-crystal (Bi,Y,Lu,Pr)<Subscript>3</Subscript>(Fe,Ga)<Subscript>5</Subscript>O<Subscript>12</Subscript> films

Using high-speed photography, dynamic magnetic structures are studied in Bi-containing (210)-oriented single-crystal films of (Bi,Y,Lu,Pr)₃(Fe,Ga)₅O₁₂ grown through liquid-phase epitaxy from an overcooled solution in the melt on (Gd,Ga)₃(Mg,Zr,Ga)₅O₁₂ substrates. At various temperatures, the ranges of pulsed magnetic fields are determined in which unidirectional anisotropy of domain wall velocity and spatial distortions of moving domain walls are observed.     

Dynamics of ions produced by laser ablation of ceramic Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Al at 193 nm

We study the dynamics of ions produced upon ablation of Al and ceramic Al₂O₃ targets using nanosecond laser pulses at 193 nm (6.4 eV) as a function of the laser fluence from threshold up to 12 J cm⁻². An electrical (Langmuir) probe located at 40 mm from the target surface has been used for determining the ion yield and calculating the kinetic energy distributions. The results for both targets show the existence of a significant amount of ions having kinetic energies >200 eV (≈20% around threshold fluence), and kinetic energies are up to >1.5 keV. The results are related with the existence of direct photonionization processes caused by the photon energy of the laser being higher than the ionization potential of Al (5.98 eV). Comparison of the ion yield when ablating the two types of targets for fluences above threshold to data reported in the literature suggests that the magnitude of the yield and its threshold are parameters depending on the thermal properties of the target rather than on the laser wavelength. Around threshold, the different behavior of ion yield when ablating Al and Al₂O₃ targets suggests that the threshold for neutral aluminium and ion species in the case of ablation of the Al₂O₃ target must be similar.     

CaCuMn<Subscript>6</Subscript>O<Subscript>12</Subscript> vs. CaCu<Subscript>2</Subscript>Mn<Subscript>5</Subscript>O<Subscript>12</Subscript>: A comparative study

The ferrimagnetic compounds Ca(Cu_xMn_3?x)Mn₄O₁₂ of the double distorted perovskites AC₃B₄O₁₂ family exhibit a rapid increase of the ferromagnetic component in magnetization at partial substitution of square coordinated (Mn³⁺)_C for (Cu²⁺)_C. In the transport properties, this is seen as a change of the semiconducting type of resistivity for the metallic one. The evolution of magnetic properties of Ca(Cu_xMn_3?x)Mn₄O₁₂ is driven by strong antiferromagnetic exchange interaction of (Cu²⁺)_C with (Mn³⁺/Mn⁴⁺)_B coordinated octahedra. The competing interactions of (Mn³⁺)_C with (Mn³⁺/Mn⁴⁺)_B lead to the formation of noncollinear magnetic structures that can be aligned by magnetic fields.     

The influence of the specific surface of grains on the luminescence properties of Nd<Superscript>3+</Superscript>-doped Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> nanopowders

Nd³⁺:Y₃Al₅O₁₂ (Nd:YAG) powders were prepared by the Pechini method in the temperature range of 800 to 1400 °C. The pure garnet phase of the obtained materials was confirmed by XRD studies. The size of the grains was controlled by the annealing temperature of the samples. Their morphologies were investigated by TEM and porosity measurements (BET). The effect of annealing temperature on the morphology and luminescence properties of Nd:YAG nanocrystallites was studied, and the results were compared to the properties of a Nd:YAG single crystal. A significant enhancement of the ⁴F_3/2→⁴I_9/2/⁴F_3/2→⁴I_11/2 intensity ratio with decreasing grain size was observed. It was found that the decay times of the Nd³⁺ luminescence depends on the specific surface and is significantly longer for well crystallized nanocrystalline grains than for single crystals having the same concentration of Nd³⁺ ions. The role of crystallinity and specific surface on the radiative processes is analyzed. PACS 78.55.-m; 78.20.Ci; 78.67.Bf; 78.68.+m