Li-ion charge storage performance of wood-derived carbon fibers@MnO as a battery anode

Wood-derived carbons have been demonstrated to have large specific capacities as the anode materials of lithium-ion batteries(LIBs). However, these carbons generally show low tap density and minor volumetric capacity because of high specific surface area and pore volume. Combination with metal oxide is one of the expected methods to alleviate the obstacles of wood-derived carbons. In this work, the composites of Mn O loaded wood-derived carbon fibers(CF@Mn O) were prepared via a simple and envir...     

Fe2O3-MWNTs Composite with Reinforced Concrete Structure as High-performance Anode Material for Lithium-ion Batteries

AFe₂O₃-MWNTs(multi-walled carbon nanotubes) composite with a reinforced concrete structure was fabricated employing a two-step method, which involves a sol-gel process followed by high-temperature in situ sintering. This Fe₂O₃-MWNTs composite, intended to be used as an anode material for lithium-ion batteries, maintained a reversible capacity as high as 896.3 mA·h/g after 100 cycles at a current density of 100 mA/g and the initial coulombic efficiency reached 75.5%. The rate capabilities of the Fe₂O₃-MWNTs composite, evaluated using the ratios of capacity at 100, 200, 500, 1000, 2000 and 100 mA/g after every 10 cycles, were determined to be 904.7, 852.1, 759.0, 653.8, 566.8 and 866.3 mA·h/g, respectively. Such a superior electrochemical performance of the Fe₂O₃-MWNTs composite is mainly attributed to the reinforced concrete construction, in which the MWNTs function as the skeleton and conductive network. Such a structure contributes to shortening the transport pathways for both Li⁺ and electrons, enhancing conductivity and accommodating volume expansion during prolonged cycling. This Fe₂O₃-MWNTs composite with the designed structure is a promising anode material for high-performance lithium-ion batteries.     

层状钒青铜纳米片的制备及其锂离子电池阳极材料性能

室温下, 在水溶液中将铵根离子和水分子插入到商用V₂O₅纳米颗粒的层间, 制得了层状的钒青 铜[(NH₄)₂V₆O₁₆·H₂O]纳米片. 该纳米片的尺寸为2~10 μm, 厚度为50~250 nm. 与商用V₂O₅纳米颗粒相比, (NH₄)₂V₆O₁₆·H₂O纳米片用作锂离子电池(LIBs)的阳极材料时, 其性能得到较大提升, 包括大的可逆放电容量 (0.1 A/g时为1148 mA·h/g)、 出色的循环性能(循环70圈后在0.1 A/g时具有1002 mA·h/g的高容量)和高倍率性能(在0.1 A/g时具有1070 mA·h/g的可逆性能). 研究结果表明, (NH₄)₂V₆O₁₆·H₂O纳米片可以作为锂离子电池优良的阳极材料, 也有望应用于其它(如钠离子电池和锌离子电池等)可再充电电池.     

Cu2SnSe3/CNTs Composite as a Promising Anode Material for Sodium-ion Batteries

Metal selenides as anode materials for sodium-ion batteries have attracted considerable attention owing to their high theoretical specific capacities and variable composition and structures.However,the achievement of long cycle life and superior rate performance is challenging for these selenide materials due to the volume variation upon cycling.Herein,a composite composed of a new binary-metal selenide[Cu2SnSe3(CSS)]and carbon nanotubes(CNTs)was constructed via a hydrothermal process followed by calcination at 600℃.Benefited from the unique structure of binary-metal selenide and the conductive network of CNTs,the Cu2SnSe3/carbon nanotubes(CSS/CNT)composite exhibits excellent electrochemical performance when used as an anode material for sodium-ion batteries.A reversible specific capacity of 399 mA·h/g can be maintained at a current density of 100 mA/g even after 100 cycles.This work provides a promising strategy for rational design of binary-metal selenides upon delicate crystal phase control as electrode materials.     

二维纳米片组成的花状铁醇盐及其微纳结构三氧化二铁衍生物的储锂性能

Fe₂O₃作为锂电池负极材料具有诸多优点,但其较低的本征电导率和充放电循环过程中材料粉化使得其电化学储锂性能有待改善。 本文以具有花状微纳结构的铁醇盐为反应中间体,在空气气氛下烧结制备出具有花状微纳结构的铁基负极材料Fe₂O₃。 纳米花状的铁醇盐可以在低烧结温度下转化为目标产物,从而使得产物能够保持中间体的形貌。 300 ℃热处理条件下,所得样品在电流密度为200 mA/g时首次放电比容量为1360 mA·h/g,循环100次后的容量仍然达到515.6 mA·h/g;相比之下,450和800 ℃热处理所得样品100次循环后,比容量分别为247.6和206.7 mA·h/g。 微纳结构在增加材料的活性的同时,也能够抑制材料的粉化现象,因而所制得的材料表现出较大的比容量和良好的循环性能,为解决Fe₂O₃负极材料循环性能差的问题提供了思路。     

α-MnO2 nanotubes: high surface area and enhanced lithium battery properties

A simple one-step route for preparing α-MnO(2) nanotubes is reported. The α-MnO(2) nanotubes exhibit a high surface area of 226 m(2) g(-1) and reversible capacity of 512 mA h g(-1) at a high current density of 800 mA g(-1) after 300 cycles, as well as cycling stability when measured as an anode in lithium batteries.     

MnS hollow microspheres combined with carbon nanotubes for enhanced performance sodium-ion battery anode

MnS as anode material for sodium-ion batteries (SIBs) has recently attracted great attention because of the high theoretical capacity, great natural abundance, and low cost. However, it suffers from inferior electrical conductivity and large volume expansion during the charge/discharge process, leading to tremendous damage of electrodes and subsequently fast capacity fading. To mitigate these issues, herein, a three-dimensional (3D) interlaced carbon nanotubes (CNTs) threaded into or between MnS hollow microspheres (hollow MnS/CNTs composite) has been designed and synthesized as an enhanced anode material. It can effectively improve the electrical conductivity, buffer the volume change, and maintain the integrity of the electrode during the charging and discharging process based on the synergistic interaction and the integrative structure. Therefore, when evaluated as anode for SIBs, the hollow MnS/CNTs electrode displays enhanced reversible capacity (275 mAh/g at 100 mA/g after 100 cycles), which is much better than that of pure MnS electrode (25 mAh/g at 100 mA/g after 100 cycles) prepared without the addition of CNTs. Even increasing the current density to 500 mA/g, the hollow MnS/CNTs electrode still delivers a five times higher reversible capacity than that of the pure MnS electrode. The rate performance of the hollow MnS/CNTs electrode is also superior to that of pure MnS electrode at various current densities from 50 mA/g to 1000 mA/g.     

High capacity Na-storage and superior cyclability of nanocomposite Sb/C anode for Na-ion batteries

A Sb/C nanocomposite was synthesized and found to deliver a reversible 3 Na storage capacity of 610 mA h g(-1), a strong rate capability at a very high current of 2000 mA g(-1) and a long-term cycling stability with 94% capacity retention over 100 cycles, offering practical feasibility as a high capacity and cycling-stable anode for room temperature Na-ion batteries.     

二维层状氮化二钙作为钠离子电池负极材料

以Ca₃N₂为前驱体,用高温热解法制备了2D层状结构Ca₂N 并用X射线和扫描电镜对Ca₂N的组成、结构和形貌进行了表征。 作为钠离子电池新型负极材料,在50 mA/g电流密度充放电,首次放电比容量可达584 mA·h/g,可逆比容量达180 mA·h/g。在2000 mA/g大电流密度下,仍有70 mA·h/g。     

Se-decorated SnO2/rGO composite spheres and their sodium storage performances

SnO₂ is considered a promising anode material for sodium-ion batteries due to its high theoretical capacity and low cost.However,the poor electrical conductivity and dramatic volume variation during cha rge/discharge cycling is a major limitation in its practical applicability.Here we propose a simple onepot spray pyrolysis process to construct unique pomegranate-like SnO₂/rGO/Se spheres.The ideal structural configuration of these architectures was effective in alleviating the large volume variation of SnO₂,besides facilitating rapid electron transfer,allowing the devised anode to exhibit superior sodium sto rage performances in terms of capacity(506.7 mAh/g at 30 mA/g),cycle performance(397 mAh/g after100 cycles at 50 mA/g) and rate capability(188.9 mAh/g at an ultrahigh current density of 10 A/g).The experimental evidence confirms the practical workability of p-SnO₂/rGO/Se spheres in SIBs.     

Matryoshka-type carbon-stabilized hollow Si spheres as an advanced anode material for lithium-ion batteries

Silicon(Si) is regarded as the potential anode for lithium-ion batteries(LIBs), due to the remarkable theoretical specific capacity and low voltage plateau. However, the rapid capacity decay resulting from volume variation and slow electron/ion transportation of Si limit its practical application. Here, matryoshka-type carbon-stabilized hollow silicon spheres(Si/C/Si/C) are synthesized by an aluminothermic reduction and calcination process. The Si/C/Si/C anode materials prepared at 500 ℃(Si/C/Si...     

Amorphous cobalt silicate nanobelts@carbon composites as a stable anode material for lithium ion batteries

During the past decade, tremendous attention has been given to the development of new electrode materials with high capacity to meet the requirements of electrode materials with high energy density in lithium ion batteries. Very recently, cobalt silicate has been proposed as a new type of high capacity anode material for lithium ion batteries. However, the bulky cobalt silicate demonstrates limited electrochemical performance. Nanostructure engineering and carbon coating represent two promising strategies to improve the electrochemical performance of electrode materials. Herein, we developed a template method for the synthesis of amorphous cobalt silicate nanobelts which can be coated with carbon through the deposition and thermal decomposition of phenol formaldehyde resin. Tested as an anode material, the amorphous cobalt silicate nanobelts@carbon composites exhibit a reversible high capacity of 745 mA h g^–1 at a current density of 100 mA g^–1, and a long life span of up to 1000 cycles with a stable capacity retention of 480 mA h g^–1 at a current density of 500 mA g^–1. The outstanding electrochemical performance of the composites indicates their high potential as an anode material for lithium ion batteries. The results here are expected to stimulate further research into transition metal silicate nanostructures for lithium ion battery applications.     

Ni3S2@碳纳米管复合材料的制备及其储钠性能

采用一步固相煅烧工艺制备了碳纳米管原位封装Ni₃S₂纳米颗粒（Ni₃S₂@CNT）,并研究了其作为钠离子电池（SIBs）负极材料的电化学性能. 通过X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、循环伏安测试、恒流充放电以及交流阻抗等研究了Ni₃S₂@CNT的物相结构、形貌特征以及电化学性能. 电化学测试表明,材料在100 mA·g ^-1电流密度下,放电容量可以达到541.6 mAh·g ^-1,甚至在2000 mA·g ^-1的大电流密度下其放电比容量也可以维持在274.5 mAh·g ^-1. 另外,材料在100 mA·g ^-1电流密度下,经过120周充放电循环后其放电和充电比容量仍然可以保持在374.5 mAh·g ^-1和359.3 mAh·g ^-1,说明其具有良好倍率性能和循环稳定性能. 良好的电化学性能归因于这种独特的碳纳米管原位封装Ni₃S₂纳米颗粒结构. 碳纳米管不但可以提高复合材料的导电性,也可以缓冲Ni₃S₂纳米颗粒在反复充放电过程中产生的体积膨胀效应,明显改善了Ni₃S₂@CNT负极复合材料的电化学性能.     

Electrospun Sb2Se3@C nanofibers with excellent lithium storage properties

Antimony-based materials have become promising anodes within lithium-ion batteries(LIBs)due to their low cost and the high theoretical capacity.However,there is a potential to further enhance the electrochemical performance of such antimony-based materials.Herein,Sb2Se3@C nanofibers(Sb2Se3@CNFs)are designed and obtained via a novel electrospinning method.Upon electrochemically testing as an anode within LIBs,the Sb2Se3@CNFs(annealed at 600℃)delivers a remarkably good cycling performance of 625 mAh/g at 100 mA/g after 100 cycles.Moreover,it still remains at 490 mAh/g after 500 cycles with an applied current density of 1.0 A/g.The excellent performance of the Sb2 Se3@CNFs can be attributed to the fact that the N-doped C matrices not only remit the volume expansion of materials,but also enhance the electrical and ionic conductivity thusly increasing the lithium-ion diffusion.The obtained Sb2Se3@CNFs are promising anode for LIBs in the future.     

3D multicore-shell CoSn nanoboxes encapsulated in porous carbon as anode for lithium-ion batteries

Due to its high theoretical capacity and appropriate potential platform, tin-based alloy materials are expected to be a competitive candidate for the next-generation high performance anodes of lithium-ion batteries. Nevertheless, the immense volume change during the lithium-ion insert process leads to severe disadvantages of structural damage and capacity fade, which limits its practical application. In this work, a three-dimensional (3D) multicore-shell hollow nanobox encapsulated by carbon layer is obtained via a three-step method of hydrothermal reaction, annealing and alkali etching. During the electrochemical reactions, the CoSn@void@C nanoboxes provide internal space to compensate the volumetric change upon the lithiation of Sn, while the inactive component of Co acts as chemical buffers to withstand the anisotropic expansion of nanoparticles. Owing to the above-mentioned advantages, the elaborated anode delivers an excellent capacity of 788.2 mAh/g at 100 mA/g after 100 cycles and considerable capacity retention of 519.2 mAh/g even at a high current density of 1 A/g after 300 cycles. The superior stability and high performance indicate its capability as promising anodes for lithium-ion batteries.     

MWCNT@SiO_2纳米同轴电缆的制备及储锂性能

以多壁碳纳米管(MWCNT)为模板,通过正硅酸乙酯(TEOS)的水解缩聚反应制得MWCNT@SiO2纳米同轴电缆.采用透射电子显微镜(TEM)、扫描电子显微镜(SEM)和电化学测试对样品的形貌、结构及电化学性能进行表征.结果表明,MWCNT表面包覆了一层厚度均匀的多孔SiO2层,利于其获得较好的储锂性能.作为锂离子电池负极材料,MWCNT@SiO2纳米同轴电缆表现出了较高的比容量和较好的循环性能.在100 m A/g电流密度下经过80次循环,MWCNT@SiO2纳米同轴电缆的放电比容量仍高达431.7 m A·h/g,高于石墨材料的理论比容量(372 m A·h/g).     

Nafion/Titanium Dioxide‐Coated Lithium Anode for Stable Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries have shown great potential as high energy‐storage devices. However, the stability of the Li metal anode is still a major concern. This is due to the formation of lithium dendrites and severe side reactions with polysulfide intermediates. We herein develop an anode protection method by coating a Nafion/TiO₂ composite layer on the Li anode to solve these problems. In this architecture, Nafion suppresses the growth of Li dendrites, protects the Li anode, and prevents side reactions between polysulfides and the Li anode. Moreover, doped TiO₂ further improves the ionic conductivity and mechanical properties of the Nafion membrane. Li–S batteries with a Nafion/TiO₂‐coated Li anode exhibit better cycling stability (776 mA h g^?1 after 100 cycles at 0.2 C, 1 C=1672 mA g^?1) and higher rate performance (787 mA h g^?1 at 2 C) than those with a pristine Li anode. This work provides an alternative way to construct stable Li anodes for high‐performance Li–S batteries.     

Multilayer Porous Vanadium Nitride Microsheets Anodes for Highly Stable Na-ion Batteries

Sodiumion batteries(SIBs)have attracted intensive attention as promising alternative to lithium-ionbatteries(LIBs)for large scale energy storage systems because of low cost of sodium,similar energy storage mechanism and the reasonable performance.However,it is still a great challenge to search and design a robust structure of anode materials with excellent cycling stability and high rate capability for SIBs.Herein,multilayer porous vanadium nitride(VN)microsheets are synthesized through a facile and scalable hydrothermal synthesis-nitrogenization strategy as an effective anode material for SIBs.The multilayer porous VN microsheets not only offer more active sites for fast Na+insertion/extraction process and short diffusion pathway,but also effectively buffer the volume change of anode due to more space in the multilayer porous structure.The large proportions of capacitive behavior imply that the Na+charge storage depends on the intercalation pseudocapacitive mechanism.The multilayer porous VN microsheets electrodes manifest excellent cycling stability and rate capability,delivering a discharge capacity of 156.1 mA·h/g at 200 mA/g after 100 cycles,and a discharge capacity of 111.9 mA·h/g at 1.0 A/g even after 2300 cycles with the Coulombic efficiency of nearly 100%.     

多孔纳米立方FeSe2/石墨烯复合材料的可控构建及在钠离子电池中的应用

设计具有较高比容量和循环稳定性的负极材料对于钠离子电池的发展至关重要。过渡金属硒化物因其具有较高的理论容量而成为潜在的负极材料。但是,硒化物电导率低下且在钠离子嵌入/脱出的过程中会发生较大程度的体积膨胀,导致比容量快速下降。因此,结构调控显得尤为重要。通过常规水热法在二维还原氧化石墨烯（rGO）上原位生长多孔纳米立方体FeSe₂,制备了具有更多活性位点和结构更加稳定的FeSe₂/rGO复合材料。当用作钠离子电池的负极时,复合材料FeSe₂/rGO在0.2 A/g时比容量为694.6 mA?h/g,在2.0 A/g电流密度下,循环300圈后比容量为300 mA?h/g。     

原位氮掺杂碳包覆CoxP复合物的制备及其锂电性能

以类沸石咪唑酯骨架化合物ZIF-67为钴源、碳源和氮源前驱体,红磷作为磷源,在800 ℃煅烧直接制备氮掺杂碳包覆的Co₂P@N-C和CoP@N-C复合物,并研究其作为锂离子电池负极材料的电化学性能。 结果表明,所得复合物的组分可以通过调控ZIF-67和红磷的比例而改变。 所得复合物的结构为正十二面体,尺寸约250~400 nm,具有良好的导电性。 用作锂离子电池电极材料时,在电流密度为0.05 A/g下,Co₂P@N-C和CoP@N-C复合物首次放电容量分别达到942和1170.6 mA·h/g。 在1 A/g的电流密度下,经过500次循环容量依然可以保持在306.6和180.3 mA·h/g。 论文提供了一种绿色环保制备锂电池用磷化钴/碳复合物的简易方法。