首页 | 本学科首页   官方微博 | 高级检索  
     检索      

二维层状氮化二钙作为钠离子电池负极材料
引用本文:陈光海,白莹,吴锋,吴川.二维层状氮化二钙作为钠离子电池负极材料[J].应用化学,2018,35(3):0-0.
作者姓名:陈光海  白莹  吴锋  吴川
作者单位:北京理工大学材料学院,环境科学与工程实验室,北京重点实验室 北京 100081;北京市电动汽车协同创新中心 北京 100081
基金项目:国家973计划(2015CB251100)资助项目
摘    要:以Ca3N2为前驱体,用高温热解法制备了2D层状结构Ca2N 并用X射线和扫描电镜对Ca2N的组成、结构和形貌进行了表征。 作为钠离子电池新型负极材料,在50 mA/g电流密度充放电,首次放电比容量可达584 mA·h/g,可逆比容量达180 mA·h/g。在2000 mA/g大电流密度下,仍有70 mA·h/g。

关 键 词:氮化二钙  二维层状结构  钠离子电池  负极材料  
收稿时间:2017-11-27

Two-Dimensional Layered Dicalcium Nitride as Anode Material for Sodium Ion Batteries
CHEN Guanghai,BAI Ying,WU Feng,WU Chuan.Two-Dimensional Layered Dicalcium Nitride as Anode Material for Sodium Ion Batteries[J].Chinese Journal of Applied Chemistry,2018,35(3):0-0.
Authors:CHEN Guanghai  BAI Ying  WU Feng  WU Chuan
Institution:Beijing Key Laboratory of Environmental Science and Engineering,School of Materials Science and Engineering,Beijing Institute of Technology,Beijing 100081,China; Collaborative Innovation Center of Electric Vehicles in Beijing,Beijing 100081,China
Abstract:Two-dimensional layered Ca2N was synthesized via a pyrolysis method with Ca3N2 precursor. The component, structure and morphology of Ca2N were characterized by X-ray diffraction and scanning electron microscope. As a novel anode material of sodium ion batteries, the initial discharge capacity is up to 584 mA·h/g and the reversible capacity is about 180 mA·h/g at a current density of 50 mA/g. Even at a high current density of 2000 mA/g, a capacity of 70 mA·h/g can be retained.
Keywords:dicalcium nitride  two-dimensional layered structure  sodium ion batteries  anode material
本文献已被 CNKI 等数据库收录!
点击此处可从《应用化学》浏览原始摘要信息
点击此处可从《应用化学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号