Light-scattering studies on polystyrenes in isorefractive poly(methyl methacrylate)–toluene “solvents”

The rms radii of gyration 〈S²〉^1/2 and second virial coefficients Γ₂ of five monodisperse polystyrenes (M × 10^?5 = 1.6, 2.8, 4.2, 6.6) were measured in isorefractive toluene–poly(methyl methacrylate) (M?_v = 4.0 × 10⁴, 1.6 × 10⁵, and 6.3 × 10⁵) “solvents.” For a given PMMA, the concentration at which the θ condition (defined by Γ₂ = 0) was reached was independent of PS molecular weight, but varied inversely with PMMA molecular weight (0.10, 0.056, and 0.023 g/mL, respectively). When this θ condition is reached by adding PMMA to toluene, the radii of gyration are decreased by only about 15%, much less than when it is reached by going to a poor, low-molecular-weight solvent. This reflects the exclusion of PMMA from the PS coils, the internal environment of which is essentially pure toluene.     

Effects of concentration of nonionic surfactant and molecular weight of polymers on the morphology of anisotropic polystyrene/poly(methyl methacrylate) composite particles prepared by solvent evaporation method

The effects of the concentration of polyoxyethylene octylphenyl ether (OP-10) as a nonionic surfactant and the molecular weight of polymers (polystyrene (PS) and poly(methyl methacrylate) (PMMA)) on the morphology of anisotropic PS/PMMA composite particles were investigated. In the case of polymers with lower molecular weight (M _w ≈ 6.0 × 10⁴ g/mol), the PS/PMMA composite particles have dimple, via acorn, to hemispherical shapes along with the increase of the OP-10 concentration. On the other hand, when the polymers have higher molecular weight (M _w ≈ 3.3 × 10⁵ g/mol), the morphology of PS/PMMA composite particles changed from dimple, via hemispherical, to snowman-like structure while the concentration of OP-10 was increased. Furthermore, thermodynamic analysis was first simply made by spreading coefficients, and the results indicated that both the concentration of OP-10 aqueous solution and the molecular weight of polymers were very important to the final morphology of anisotropic composite particles.     

IR STUDY ON MONOMOLECULAR PARTICLE AGGLOMERATES OF POLYSTYRENE OBTAINED BY FREEZE-DRYING OF ITS DILUTE SOLUTION

The monomolecular particle agglomerates of polystyrenes were obtained by freeze-drying of its very dilutesolutions of 1.3×10~(-5)-2.0×10~(-5) g/mL in benzene: cylcohexane (100:1) solvents, and they were annealed at roomtemperature for hundred days before use. According to ~(13)C-NMR measurement the polystyrenes should be practically atactic.The number average molecular weights of the samples are 2.80×10~3, 2.00×10~4, and 1.55×10~6, respectively. The freeze-dried aPS with a molecular weight higher than 10~4 show two new IR absorption bands at 1098 and 1261 cm~(-1), which areabsent in the normal aPS and freeze-dried styrene oligomer. It was also found that the low molecular weight samples canonly form powders, whereas the freeze-dried aPS with higher molecular weight form a mixture of powders and fibrils, ofwhich the longer fibrils show a much stronger 1261 cm~(-1) band than the shorter fibrils and the powder. It seems that the1261 cm~(-1) band corresponds to the stacking behavior of monomolecular particles.     

Graft polymerization of acrylic monomers onto starch fractions. III. Effect of carbohydrate structure

Grafted PMMA was isolated by the acid hydrolysis method. Weight-average and number-average molecular weights were determined by gel permeation chromatography. The number-average molecular weight of the grafted chains was about 475,000 for amylopectin and 403,000 for amylose. The number of grafted chains (mmol) ranged from 2.4 × 10^?3 to 4.6 × 10^?3 for amylopectin graft copolymers and from 2.9 × 10^?3 to 6.8 × 10^?3 for those of amylose. These results were related to others obtained from ceric ion consumption studies. The values suggest that amylopectin, because of its complex structure, favors a higher consumption of ceric ion in homopolymerization reactions and inhibits the initiation reactions of the copolymerization.     

Effect of Tacticity of Poly(Methyl Methacrylate) on Conductivity of Poly(Ethylene Oxide)-Poly(Methyl Methacrylate) Blend-Based Polymeric Electrolytest

Abstract

Polymer electrolytes based on blends of poly(ethylene oxide) (PEO) with various stereoisomers of poly(methyl methacrylate) (PMMA) were studied by means of impedance spectroscopy and DSC. It was found that isotactic poly(methyl methacrylate) (1PMMA)-based electrolytes exhibit ambient temperature conductivities at least one order of magnitude higher than the electrolytes containing other stereoisomers of PMMA. The highest value of room temperature conductivity equal to 9 × 10^?5 S/cm was measured for a sample containing 30 wt% IPMMA. The effect observed results from the presence of a flexible amorphous phase in PEO-IPMMA blends which is favorable for fast ionic transport. A small increase of ionic conductivity with decreasing molecular weight of the added atactic poly(methyl methacrylate) was also observed.     

Unperturbed dimensions of poly(ethylene oxide)

The intrinsic viscosities of fractions of poly(ethylene oxide) in the molecular weight range 1.5 × 10³ to 10⁶ have been measured at 25°C in benzene, carbon tetrachloride, and acetone; at 35°C in 0.45M aqueous potassium sulfate; and at 50°C in methyl isobutyl ketone and diethylene glycol diethyl ether. The latter three are practically theta solvents. The value of (r₀² /M)^1/2 for poly(ethylene oxide) is calculated to be 0.84 Å from the molecular weights of the high molecular weight fractions, and their intrinsic viscosities in the theta solvents and acetone. Erroneous values result if the usual methods of determination are applied to the data obtained for the low molecular weight (<10⁴) fractions or to the intrinsic viscosities in the very good solvents, benzene and carbon tetrachloride.     

Ferric oxide-catalyzed polymerization of methyl methacrylate

The polymerization of methyl methacrylate was carried out in water at various concentrations of sodium bisulfite, ferric oxide, and methyl methacrylate at 30, 40, and 50°C. The effect of ferric oxide on the rate of polymerization was studied at 50°C. Rates of polymerization increased in the presence of ferric oxide. For example, the rate of polymerization increased from 3.4 × 10^?5 mole/l.-sec to 11.8 × 10^?5 mole/l.-sec when the ferric oxide concentration was varied from 0 to 15 g/l. water. The molecular weight of the polymer decreased from an average of 1.4 × 10⁶ in the absence of ferric oxide to 2.8 × 10⁵ when the ferric oxide was present. The variation of molecular weight of the polymers with temperature and conversion was studied. At a fixed conversion of 80%, the average molecular weight decreased from 3.4 × 10⁵ at 30°C to 2.2 × 10⁵ at 50°C. The average molecular weight was also found to increase with increasing monomer and initiator concentrations. It increased from 8.1 × 10⁴ to 5.3 × 10⁵ and from 3.4 × 10⁵ to 8.9 × 10⁵ as the initiator and monomer concentrations increased from 0.01 to 0.05 mole/l. and from 0.235 to 0.705 mole/l., respectively. The apparent energy of activation for the polymerization was found to be 15.6 and 9.7 kcal/mole in absence and in presence of ferric oxide, respectively.     

Polymerization of diallyl phthalate in solution by γ-radiation

The polymerization of diallyl phthalate has been studied in two solvents, benzene (G_Radical = 0.7) and chloroform (G_R = 11.2), γ-radiation being used to investigate the effect of the solvent on the rates of polymerization and also chain transfer to the solvent. Kinetic analysis shows that in benzene solution the initiating species come almost exclusively from the monomer, but in chloroform they arise only from the solvent. The latter was further confirmed from the chlorine analysis of the polymer wherein chloroform appears to have telomerized with diallyl phthalate. In neither of the solvents was high molecular weight polymer obtained. The k_p/k_t^1/2 for the polymerization of DAP was found to be 3.3 × 10^?4 and 1.17 × 10^?3 in benzene and chloroform solutions, respectively. The chain-transfer constant C_S was 11.25 × 10^?3 and 9.75 × 10^?3 for benzene and chloroform, respectively.     

Dynamic light scattering studies of atactic and syndiotactic poly(methyl methacrylate)s in dilute theta solution

The present article considers the coil‐to‐globule transition behavior of atactic and syndiotactic poly(methyl methacrylates), (PMMA) in their theta solvent, n‐butyl chloride (nBuCl). Changes in Rh in these polymers with temperature in dilute theta solutions were investigated by dynamic light scattering. The hydrodynamic size of atactic PMMA (a‐PMMA‐1) in nBuCl (M_w: 2.55 × 10⁶ g/mol) decreases to 61% of that in the unperturbed state at 13.0°C. Atactic PMMA (a‐PMMA‐2) with higher molecular weight (M_w: 3.3 × 10⁶ g/mol) shows higher contraction in the same theta solvent (α_η = R_h(T)/R_h (θ) = 0.44) at a lower temperature, 7.25°C. Although syndiotactic PMMA (s‐PMMA) has lower molecular weight than that of atactic samples (M_w: 1.2 × 10⁶), a comparable chain collapse was observed (α_η = 0.63) at 9.0°C. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2253–2260, 1999     

Structure and molecular motion of poly(ethylene oxide) chains adsorbed on a silica-tethered poly(methyl methacrylate) by the spin label method

The spin-label method was used to study the structure and molecular motion of poly(ethylene oxide) (PEO) chains adsorbed on a silica-tethered poly(methyl methacrylate) (PMMA). Spin-labelled PEO with a narrow molecular weight distribution, having number averaged molecular weight (M _N)=6.0×10³, was adsorbed on the surface of the silica-tethered PMMA with various grafting ratios in carbon tetrachloride solution at 35?°C. ESR spectra were measured at various temperatures after the samples were completely dried. The ESR spectra are composed of two spectra arising from spin-labels attached to “train” and “tail” segments, which are strongly and weakly interacted with the silica surface, respectively. The fractional amount of the “tail” segments increases extremely with the grafting ratio of PMMA. Molecular mobility of the PEO chains estimated from the temperature dependence of the ESR spectra also decreases significantly with the grafting ratio of PMMA. Structure and molecular motion of the PMMA chains tethered on the silica were also studied using the spin-labelled PMMA. Consequently, parts of the PEO segments penetrate into the PMMA chains and is adsorbed on the silica surface (“train” segments), whereas parts of the PMMA segments protrude from the surface. The other PEO segments are entangled with the tethered PMMA chains (“tail” segments).     

Polymerization of phenylacetylene by WCl6·Ph4Sn: Synthesis of high polymer achieved by selection of solvents

Phenylacetylene was polymerized by WCl₆·Ph₄Sn (1:1) in 1,4-dioxane to provide in high yield a polymer whose molecular weight reached 1 × 10⁵. The polymerization also proceeded in other oxygen-containing solvents (ethers, esters, and ketones) but the polymer molecular weights were lower than 1 × 10⁴. Certain hydrocarbon solvents such as cyclohexene, tetralin, and indan also afforded high-molecular-weight polyphenylacetylene [M _n = (5–8) × 10⁴], as compared with those (M _n ≤ 1.5 × 10⁴) obtained in conventional aromatic hydrocarbons like benzene. A high polymer (M _n = 1.6 × 10⁵) was also formed from β-naphthylacetylene in 1,4-dioxane. It was inferred that the active hydrogens of these solvents prevent the formed polymer from being decomposed by a radical mechanism and/or modify the nature of active species.     

超临界二氧化碳中无水相涂料的合成与表征

为了减小传统纸张涂布中涂料水分对涂布能耗、涂布质量以及对涂布原纸质量的影响,研究了以超临界二氧化碳为反应介质,制备聚甲基丙烯酸甲酯(PMMA)和碳酸钙颜料混合的粉末涂料粒子.通过FTIR、GPC-十八角度激光光散射联用技术对PMMA组成结构进行了表征,考察了反应体系中引发剂浓度、单体浓度、稳定剂浓度、反应温度和反应时间对聚合反应的转化率和聚合产物的分子量的影响.实验表明,当反应条件为反应压力10MPa,反应温度75℃,反应时间8h,单体浓度0.10g/mL,引发剂浓度0.10×10-2g/mL,稳定剂浓度0.06×10-2g/mL时,其聚合反应的转化率较高,同时PMMA的分子量适中,分子量分布窄.SEM观察到混合涂料粒子颗粒均匀,表明颜料在粉末涂料体系中分散性良好.     

Towards high molecular weight poly(bisphenol a carbonate) with excellent thermal stability and mechanical properties by solid-state polymerization

Poly(bisphenol A carbonate) (BPA-PC) was post-polymerized by solid-state polymerization (SSP) after supercritical CO₂-induced crystallization in low molecular weight particles prepolymerized via melt transesterification reaction. The effects of the crystallization conditions on melting behavior and SSP of BPA-PC were investigated with differential scanning calorimetry (DSC), Ubbelohde viscosity method and gel permeation chromatography (GPC). The reaction kinetics of the SSP of crystallized prepolymers was studied as a function of reaction temperatures for various reaction periods. As a result, the viscosity average molecular weight of BPA-PC particles (2 mm) increased from 1.9 × 10⁴ g/mol to 2.8 × 10⁴ g/mol after SSP. More importantly, the significantly enhanced thermal stability and mechanical properties of solid-state polymerized BPA-PC, compared with those of melt transesterification polymerized BPA-PC with the same molecular weight, can be ascribed to the substantial avoidance of undergoing high temperature during polymerization. Our work provides a useful method to obtain practical product of BPA-PC with high quality and high molecular weight.     

Solution properties of poly(dimethyl siloxane)

The solution properties of poly(dimethyl siloxane) (PDMS) were studied with light scattering (LS), gel permeation chromatography/light scattering (GPC/LS), and viscometry methods. PDMS samples were fractionated, and the weight‐average molecular weights, second virial coefficient, and the z‐average radius of gyration of each fraction were found according to the Zimm method with the LS technique. In this work, the molecular weight range studied was 7.5 × 10⁴ to 8.0 × 10⁵. Molecular weights and molecular weight distributions were determined by GPC/LS. The intrinsic viscosities of these fractions were studied in toluene at 30 °C, in methyl ethyl ketone (MEK) at 20 °C, and in bromocyclohexane (BCH) at 26 °C and 28 °C. The Mark–Houwink–Sakurada relationship showed that toluene was a good solvent, and MEK at 20 °C and BCH at 28 °C were θ solvents for PDMS. The unperturbed dimensions were calculated with LS and intrinsic viscosity data. The unperturbed dimensions, expressed in terms of the characteristic ratio, were found to be 6.66 with different extrapolation methods in toluene at 30 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2678–2686, 2000     

The Effect of Active Carbon on the Kinetics of Polymerization of Methyl Methacrylate

Rates of 2–2¹?azobisisobutyronitrile initiated polymerization of methyl methacrylate in benzene were determined at 77.2, 65.0, and 50.0°C. The variation of molecular weight of the polymer with temperature and conversion was also studied. At a fixed conversion of 2.0%, the molecular weight decreased from 2.05 × 10⁵ at 50°C to 1.4 × 10⁵ at 77.2°C. The ratio of the propagation rate coefficient to the square root of the termination rate coefficient was found to be 0.61, 0.397, and 0.374 at 77.2, 65.0, and 50.0°C, respectively, with an uncertainty of ±0.5°C in temperature. The effect of active carbon on the rates of polymerization at 77.2°C was measured. Rates of polymerization decreased in the presence of active carbon. For example, the initial rate of polymerization decreased from 7.8 × 10^?4 mole/(liter min) to 4.6 × 10^?4 mole/(liter min) when the carbon concentration was varied from 0 to 9.65 g/liter. The molecular weight of the polymer increased from an average of 1.4 × 10⁵ in the absence of carbon to 1.5 × 10⁵ when carbon was present.     

Synthesis and characterization of new soluble thermally stable poly(azomethine‐ether‐imide)s: discerning the possibility for high temperature applications

A new series of polyimides was synthesized by the condensation of monomers (azomethine‐ether diamine, DA‐1 and DA‐2) with pyromelliticdianhydride (PMDA), 3,4,9,10‐perylenetetracarboxylic dianhydride (PD) and 3,3′4,4′‐benzophenonetetracarboxylic dianhydride (BD). The structural explications of monomers and polyimides was conducted by FT‐IR, ¹H NMR and elemental analysis. All polyimides were found soluble in polar aprotic solvents and found to be semicrystalline in nature confirmed by XRD. The inherent viscosities were found in the range of 0.67–0.77 g/dl. %. Average molecular weight (M_W) and number average molecular weight (Mn) of the polyimides were found in the range of 5.72 × 10⁵ g/mol–6.58 × 10⁵ g/mol and 3.79 × 10⁵ g/mol 4.11 × 10⁵ g/mol respectively. The polyimides exhibited excellent thermal properties having a glass transition temperature T_g in the range of 230–290°C and the 10% weight loss temperature was above 450°C. The values of thermodynamic parameters, activation energy, enthalpy and entropy fall in the range of 45.2–53.90 kJ/mol, 43.5–52.30 kJ/mol and 0.217 kJ/mol k to 0.261 kJ/mol k respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Facile synthesis of hollow polymeric microparticles possessing various morphologies via seeded polymerization

In this paper, hollow poly(styrene-co-divinylbenzene-co-methacrylic acid) microparticles possessing various morphologies were synthesized by a combination of seeded polymerization and SPG membrane emulsification. Three families of polystyrene (PS) microspheres with various molecular weights but similar diameters were fabricated by SPG membrane emulsification. These PS microspheres were used as seeds to investigate the effect of their molecular weight on the phase separation between the PS seeds and microgel-like networks formed during seeded polymerization and on the morphologies of the resultant particles. Our study revealed that three resultant microparticles possessed diameters of ca. 10?μm and hollow cavities. The shell thickness of the particles became thinner as M _w increased from 3.5?×?10⁴ to 28.0?×?10⁴. The morphological evolution of the microparticles during seeded polymerization was monitored, and these results verified the influence of the molecular weight of the PS seeds on the phase separation behavior and hence the morphologies of the resultant particles.     

Novel organosoluble polynorbornene bearing a polar,pendant, ester‐bridged epoxy group via living ring‐opening metathesis polymerization

A novel organosoluble polynorbornene bearing a polar, pendant, ester‐bridged epoxy group [poly(oxiran‐2‐ylmethyl 2‐methylbicyclo[2.2.1]hept‐5‐ene‐2‐carboxylate) (polyOMMC)] was prepared via the living ring‐opening metathesis polymerization (ROMP) of active norbornenes with a Ru catalyst. PolyOMMC exhibited excellent solubility in a variety of solvents. The number‐average molecular weight of polyOMMC linearly increased with the [M]/[I] ratio (where [M] is the monomer concentration and [I] is the initiator concentration), and a narrow polydispersity of 1.09–1.19 was observed; this was considered a living polymerization. When ROMP of oxiran‐2‐ylmethyl 2‐methylbicyclo[2.2.1]hept‐5‐ene‐2‐carboxylate with [M]/[I] = 350 was carried out at 30 °C in CH₂Cl₂, the number‐average molecular weight (7.01 × 10⁴; polydispersity index = 1.07) was close to the calculated molecular weight (7.28 × 10⁴), and a diblock copolymer was observed after the addition of another monomer ([M]/[I] = 350) with an increase in the number‐average molecular weight (1.60 × 10⁵; polydispersity index = 1.11), which was close to the calculated molecular weight (1.61 × 10⁵). The modified polynorbornenes retained good solubility in methylene chloride, tetrahydrofuran, dimethyl sulfoxide, dimethylformamide, N,N‐dimethylacetamide, and N‐methyl‐2‐pyrrdione. High‐performance polynorbornenes with active epoxy groups could be designed with great potential for applications in photoresists, UV curing, and elastomers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4428–4434, 2006     

Pressure dependence of the second virial coefficient of dilute polystyrene solutions

The pressure derivatives of the second virial coefficients [dA₂/dP; 0.1 ≤ P (MPa) ≤ 35.0] for dilute polystyrene (PS) solutions in good, θ, and poor solvents were measured with static light scattering. The solvent quality improved (dA₂/dP > 0) in the good and poor solvents that we investigated (toluene, chloroform; and methylcyclohexane) but deteriorated (dA₂/dP < 0) in θ solvents (cyclohexane and 50‐50 cis,trans‐decalin). The effects of temperature [22 < T (°C) < 45] and molecular weight [25 × 10³ < weight‐average molecular weight (amu mol^?1) < 900 × 10³] on dA₂/dP for PS/cyclohexane solutions were examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3070–3076, 2003     

链缠结对等规聚苯乙烯结晶的影响

在1×10^－3～2×10^－5 g•mL^－1溶液浓度范围内, 用溶液雾化冷冻升华法制备了等规聚苯乙烯(i-PS)的单链、寡链非晶态聚集体. 随着溶液浓度降低, i-PS分子链团间的分离程度增大, 链间缠结随之减少, 因此冷冻升华制备的样品中单、寡链线团数目逐渐增多. DSC研究结果表明随着溶液浓度的降低, 冷冻升华样品的结晶温度逐渐降低; 等温结晶得到的晶粒熔点和结晶度降低. 由浓度为2×10^－5 g•mL^－1溶液制备的i-PS样品在468.3 K熔体结晶60 min后, 得到平均体积约为1.5×10⁴ nm³的单链晶粒. 用SEM观察到晶粒尺寸约为20～50 nm. 采用偏光显微镜(POM)测量了不同温度等温时i-PS单、寡链聚集体球晶的生长速率. 用Hoffmann理论进行了描述, 计算得到了i-PS单链聚集体熔体结晶片晶的端表面能(σ_e)为30.2 erg•cm^－2, 侧表面能(σ)为5.7 erg•cm^－2及单分子链折叠功(q)约为4.5×10^－13 erg•molecule^－1. 与文献值相比, 实验结果表明链缠结对聚合物结晶有很大影响.