HPMA/OMMT和HPMA/CPMI/OMMT纳米复合材料的制备与表征

通过甲基丙烯酸羟丙酯(HPMA)单体与N-(4-羧基苯基)马来酰亚胺(CPMI)单体在有机蒙脱土(OMMT)中经原位插层自由基聚合反应制备了聚合物-无机纳米复合材料.OMMT由钠基蒙脱土通过十六烷基溴化铵插层处理制备.通过XRD和TEM对复合材料结构进行了表征,证实HPMA单体和HPMA/CPMI共单体在OMMT中原位插层共聚得到的复合材料均为剥离型纳米复合材料.OMMT含量为3 wt%的PolyHPMA/OMMT纳米复合材料起始分解温度为250℃,比相应的纯聚合物的热分解温度提高30℃.随着OMMT含量的增加,热分解温度进一步提高.但在测试温度范围内,PolyHPMA/OMMT纳米复合材料均没有出现明显的玻璃化转变温度.     

几种高性能热塑性树脂与蒙脱土插层复合的研究

研究了PEK C ,PES ,PEI和PSU 4种刚性分子链高性能热塑性树脂与蒙脱土插层复合的行为 ,结果表明通过溶液混合PEK C和PES很容易插入到粘土层间并使粘土剥离 ,得到剥离型纳米复合材料 ,而PEI和PSU不能插入到粘土层间 ,分析认为插层能力的差异是由于它们与粘土间的作用力不同导致的 .PEK C和PES与粘土形成纳米复合材料后 ,玻璃化温度大幅度下降 ,但热分解温度有很大提高 ,认为是由于体积很大而且刚硬的聚合物分子与粘土片层混合后形成了较大的自由体积 ,使玻璃化温度下降 ,但聚合物端基与粘土间很强的作用力使它的热解温度提高 .PEI和PSU与粘土复合后热性能没有明显变化 ,说明如果粘土与聚合物间不能形成纳米复合 ,不会对聚合物性能产生显著影响     

乳液聚合法制备聚苯乙烯/Mg-Al层状双氢氧化物纳米复合材料

采用乳液聚合法制备阻燃性聚苯乙烯MgAl层状双氢氧化物(LDHs)纳米复合材料.通过对不同合成条件下复合材料的XRD谱,讨论了纳米复合材料的形成过程;经SEM图证实了LDHs是以剥离的纳米级层片分散在基体中的;TG和DSC谱图揭示了LDHs纳米层板可有效提高PS的热稳定性,并可使PS的玻璃化转化温度明显提高;当层状双氢氧化物在插层复合材料中含量为14.92%时,纳米复合材料的氧指数可达23.5%,其用量比在PS中直接添加纳米LDHs时要少约一倍.文中还分析了纳米复合材料的形成过程.     

壳聚糖/氧化石墨烯纳米复合材料的形态和力学性能研究

通过溶液共混法成功制备了氧化石墨烯/壳聚糖纳米复合材料. 透射电镜(TEM)结果表明, 氧化石墨烯纳米粒子在壳聚糖基体中分散良好. 拉伸实验结果表明, 随氧化石墨烯含量的增加, 氧化石墨烯/壳聚糖纳米复合材料的杨氏模量和拉伸强度均显著改善, 加入4 wt%的氧化石墨烯能够使纳米复合材料的杨氏模量和拉伸强度分别提高123%和117%|但另一方面, 却也在一定程度上使复合材料的断裂伸长率或韧性下降.     

聚乙二醇/功能化石墨烯层状纳米复合材料热稳定性的提高

通过溶液共混技术成功制备了一系列聚乙二醇功能化石墨烯(GO-PEG)填充的聚乙二醇4000(PEG4000)基纳米复合材料.利用红外(FT-IR)、X衍射(XRD)、扫描电镜(SEM)、热重(TG)及玻璃化转变温度(Tg)等表征手段详细研究了复合材料的结构和热性能.结果表明:GO-PEG可均匀分散在聚合物基体中,纳米复合材料呈层状结构;组分间的较强界面相互作用协同增强了纳米复合材料的热稳定性能.最终提出了层状纳米复合材料的形成过程及机理.     

聚碳酸1,2-丙二酯/蒙脱土复合材料的制备与性能

利用阳离子交换法,以十六烷基三甲基溴化铵(HTAB)改性钠基蒙脱土制备了有机改性蒙脱土(OMMT),OMMT的层间距达到了2nm,比普通的钠基蒙脱土增加了0.74nm.采用熔融插层法制备了插层-絮凝型PPC/OMMT复合材料,当复合材料中OMMT含量为5wt%时,复合材料的杨氏模量较纯PPC树脂大幅度提高了61.8%,同时玻璃化温度(Tg)提高了2.4℃,热分解温度提高了32.3℃.因此,OMMT对大幅度提高PPC的杨氏模量具有很大的潜力.     

聚丙烯/锡氟磷酸盐玻璃复合材料的结构与性能

锡氟磷酸盐玻璃(Pglass)具有较低的玻璃化转变温度,在常规聚合物加工温度窗口内具有熔融流动性,是一种新型的无机类聚合物玻璃。本文采用双螺杆挤出机制备了聚丙烯(PP)/Pglass有机聚合物/无机玻璃复合材料,并对其相形貌、界面性能、流动性能、结晶性能、力学性能和热稳定性能进行了研究。结果表明:Pglass以微米级颗粒分散在PP基体中,且两相之间界面明显、相容性较差。Pglass的添加使复合材料的熔体剪切粘度降低。Pglass的存在促进了基体PP的结晶。复合材料的弹性模量随着Pglass含量的增加而增加。Pglass提高了复合材料的热稳定性。     

纳米层状双金属氢氧化物改性PU/PMMA的制备及其弛豫行为

采用原位聚合法,制备了聚氨酯(PU)/聚甲基丙烯酸甲酯(PMMA)/层状双金属氢氧化物(LDH)纳米复合体系(PU/PMMA/LDH).通过广角X射线衍射(WXRD)、透射电子显微镜(TEM)对其结构和形貌进行了表征,并通过热失重(TGA)、动态力学分析(DMA)和宽频介电谱(BDRS)研究了LDH含量(φ)对PU/PMMA体系热稳定性和弛豫行为的影响.结果表明,当φ<1 wt%时,LDH在聚合物基体中以剥离结构为主,PU/PMMA/LDH体系的玻璃化温度(Tg)降低,最大损耗因子(tanδmax)增大;而当φ>1 wt%时,LDH在聚合物基体中以插层结构为主,插层结构对聚合物分子链的限制使复合体系的Tg升高、tanδmax降低.LDH表面与PU硬段间的氢键作用,使复合体系的α介电弛豫转变随φ增加而向高温方向移动,弛豫过程激活参数增大.     

聚丙烯/凹凸棒石纳米复合材料的制备与性能研究

以聚丙烯(PP)为聚合物基体,天然凹凸棒石(ATP)为无机组分,经过氧化聚乙烯对ATP表面进行包覆处理,用熔融共混的方法制备了PP/ATP纳米复合材料.扫描电镜结果显示,经本方法处理后的ATP在PP基体中分散较为均匀.ATP棒晶簇直径最佳分散尺寸能达到20~40 nm,比未处理ATP在基体中的棒晶簇直径小10 nm以上;XRD测试表明,未处理ATP和处理后的ATP均有使PP晶粒细化的作用,同时不改变PP的α晶型;DSC结果显示,ATP的加入提高了PP的结晶温度和结晶度,说明ATP有一定的成核作用.通过对复合材料的力学性能测试发现,经过处理的ATP制备的复合材料力学性能优于未处理ATP复合材料对PP力学性能的改善.其中ATP与氧化聚乙烯固含量的质量比为2∶1,ATP含量为3 wt%时复合材料力学性能达到最好.缺口冲击强度比纯PP最高提高了83%,提高幅度显著;经过处理的ATP制备的复合材料拉伸强度提高了6%~11%;弯曲强度提高了33%~45%;弯曲模量提高了90%~106%.     

苯基聚倍半硅氧烷改性大豆油基聚氨酯的合成及其性能研究

以环氧大豆油为起始原料经开环反应合成出大豆油多元醇,并与聚乙二醇(PEG-600)互混作为多元醇原料制备出植物油基聚氨酯.在预聚体合成过程中,加入不同含量的七苯基三环庚硅氧烷三硅醇,通过醇羟基与异氰酸酯基的反应,将聚倍半硅氧烷(POSS)引入到植物油聚氨酯基体中,制备出聚氨酯(PU/POSS)纳米复合材料,并探讨纳米粒子—聚倍半硅氧烷对聚氨酯材料热稳定性,表面疏水性及力学性能的影响.热重分析(TGA)结果表明,在O2条件下,复合材料的初始降解温度Td5和最终稳定温度Tf都会提高,特别是当POSS含量达到9.27 wt%后,聚氨酯在450~500℃之间较强的失重现象消失;DSC结果表明玻璃化温度Tg随粒子含量的增加呈现先增大后减小的趋势;静态接触角测试结果表明随POSS含量的增加,材料表面的疏水、疏油性随之增大.拉伸测试结果表明POSS的引入能在一定程度上提高材料的拉伸强度.     

Investigation of Structural,Rheological and Thermal Properties of PMMA/ONi-Al LDH Nanocomposites Synthesized via Solvent Blending Method: Effect of LDH Loading

This article addresses the synthesis of organically tailored Ni-Al layered double hydroxide(ONi-Al LDH) and its use in the fabrication of exfoliated poly(methyl methacrylate)(PMMA) nanocomposites. The pristine Ni-Al LDH was initially synthesized by co-precipitation method and subsequently modified using sodium dodecyl sulfate to obtain ONi-Al LDH. Nanocomposites of PMMA containing various amounts of modified Ni-Al LDH(3 wt%?7 wt%) were synthesized via solvent blending method to investigate the influence of LDH content on the properties of PMMA matrix. Several characterization methods such as X-ray diffraction(XRD), transmission electron microscopy(TEM), Fourier transform infrared spectroscopy(FTIR), rheological analysis, differential scanning calorimetry(DSC) and thermo gravimetric analysis(TGA), were employed to examine the structural, viscoelastic and thermal properties of PMMA/OLDH nanocomposites. The results of XRD and TEM examination confirm the formation of partially exfoliated PMMA/OLDH nanocomposites. The FTIR results elucidate that the characteristic bands for both pure PMMA and modified LDH are present in the spectra of PMMA/OLDH nanocomposites. Rheological analyses were carried out to examine the adhesion between polymer matrix and fillers present in the nanocomposite sample. The TGA data indicate that the PMMA nanocomposites exhibit higher thermal stability when compared to pure PMMA. The thermal decomposition temperature of PMMA/OLDH nanocomposites increases by 28 K compared to that of pure PMMA at 15% weight loss as a point of reference. In comparison with pure PMMA, the PMMA nanocomposite containing 7 wt% LDH demonstrates improved glass transition temperature(Tg) of around 3 K. The activation energy(Ea), reaction orders(n) and reaction mechanism of thermal degradation of PMMA/OLDH nanocomposites were evaluated using different kinetic models. Water uptake capacity of the PMMA/OLDH nanocomposites is less than that of the pure PMMA.     

Thermal stability and fire retardancy of PMMA (nano)composites with layered metal hydroxides containing dodecyl sulfate anions

Layered double hydroxides (LDHs) with Mg/Al, Zn/Al, Ca/Al metal hydroxide layers, and a Zn/Ni hydroxy double salt (HDS) were prepared with a common anion, dodecyl sulfate [CH₃(CH₂)₁₀COO^?, DS]. The LDH and HDS additives were melt blended with poly(methyl methacrylate) (PMMA). The dispersion and morphology were characterized via X‐ray diffraction (XRD) and transmission electron microscopy. Mg/Al‐DS and Zn/Al‐DS LDHs were found to form nanocomposites with PMMA, exhibiting good dispersion and some degree of exfoliated morphology for the Zn/Al‐DS/PMMA combination and mixed intercalation and exfoliation behavior for Mg/Al‐DS in PMMA. The Ca/Al‐DS LDH and Zn/Ni‐DS HDS formed microcomposites with PMMA. Thermal stability was investigated via thermogravimetric analysis; each of the additives increased the thermal stability of PMMA. Cone calorimetry was used to measure the fire properties; the microcomposite of Zn/Ni‐DS HDS at 10% loading provided the best improvement in peak heat release rate, with a 40% reduction over the pure polymer. The residue composition after burning the composites was investigated. Copyright © 2010 John Wiley & Sons, Ltd.     

Investigation of structural,rheological and thermal properties of PMMA/ONi-Al LDH nanocomposites synthesized <Emphasis Type="Italic">via</Emphasis> solvent blending method: Effect of LDH loading

This article addresses the synthesis of organically tailored Ni-Al layered double hydroxide (ONi-Al LDH) and its use in the fabrication of exfoliated poly(methyl methacrylate) (PMMA) nanocomposites. The pristine Ni-Al LDH was initially synthesized by co-precipitation method and subsequently modified using sodium dodecyl sulfate to obtain ONi-Al LDH. Nanocomposites of PMMA containing various amounts of modified Ni-Al LDH (3 wt%-7 wt%) were synthesized via solvent blending method to investigate the influence of LDH content on the properties of PMMA matrix. Several characterization methods such as X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), rheological analysis, differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA), were employed to examine the structural, viscoelastic and thermal properties of PMMA/OLDH nanocomposites. The results of XRD and TEM examination confirm the formation of partially exfoliated PMMA/OLDH nanocomposites. The FTIR results elucidate that the characteristic bands for both pure PMMA and modified LDH are present in the spectra of PMMA/OLDH nanocomposites. Rheological analyses were carried out to examine the adhesion between polymer matrix and fillers present in the nanocomposite sample. The TGA data indicate that the PMMA nanocomposites exhibit higher thermal stability when compared to pure PMMA. The thermal decomposition temperature of PMMA/OLDH nanocomposites increases by 28 K compared to that of pure PMMA at 15% weight loss as a point of reference. In comparison with pure PMMA, the PMMA nanocomposite containing 7 wt% LDH demonstrates improved glass transition temperature (T _g) of around 3 K. The activation energy (E _a), reaction orders (n) and reaction mechanism of thermal degradation of PMMA/OLDH nanocomposites were evaluated using different kinetic models. Water uptake capacity of the PMMA/OLDH nanocomposites is less than that of the pure PMMA.     

Synthesis of poly(methyl methacrylate) nanocomposites via emulsion polymerization using a zwitterionic surfactant

The synthesis of nanocomposites via emulsion polymerization was investigated using methyl methacrylate (MMA) monomer, 10 wt % montmorillonite (MMT) clay, and a zwitterionic surfactant octadecyl dimethyl betaine (C18DMB). The particle size of the diluted polymer emulsion was about 550 nm, as determined by light scattering, while the sample without clay had a diameter of about 350 nm. The increase in the droplet size suggests that clay was present in the emulsion droplets. X-ray diffraction indicated no peak in the nanocomposites. Transmission electron microscopy showed that emulsion polymerization of MMA in the presence of C18DMB and MMT formed partially exfoliated nanocomposites. Differential scanning calorimetry showed an increase of 18 degrees C in the glass transition temperature (Tg) of the nanocomposites. A dynamic mechanical thermal analyzer also verified a similar Tg increase, 16 degrees C, for the partially exfoliated nanocomposites over poly(methyl methacrylate) (PMMA). Thermogravimetric analysis indicated a 37 degrees C increase in the decomposition temperature for a 20 wt % loss. A PMMA nanocomposite with 10 wt % C18DMB-MMT was also synthesized via in situ polymerization. This nanocomposite was intercalated and had a Tg 10 degrees lower than the emulsion nanocomposite. The storage modulus of the partially exfoliated emulsion nanocomposite was superior to the intercalated structure at higher temperatures and to the pure polymer. The rubbery plateau modulus was over 30 times higher for the emulsion product versus pure PMMA. The emulsion technique produced nanocomposites of the highest molecular weight with a bimodal distribution. This reinstates that exfoliated structures have enhanced thermal and mechanical properties over intercalated hybrids.     

Effects of clay‐modifying agents on the morphology and properties of poly(methyl methacrylate)/clay nanocomposites synthesized via γ‐ray irradiation polymerization

Via γ‐ray irradiation polymerization, poly(methyl methacrylate) (PMMA)/clay nanocomposites were successfully prepared with reactive modified clay and nonreactive clay. With reactive modified clay, exfoliated PMMA/clay nanocomposites were obtained, and with nonreactive clay, intercalated PMMA/clay nanocomposites were obtained. Both results were confirmed by X‐ray diffraction and high‐resolution transmission electron microscopy. PMMA extracted from PMMA/clay nanocomposites synthesized by γ‐ray irradiation had higher molecular weights and narrow molecular weight distributions. The enhanced thermal properties of the PMMA/clay nanocomposites were characterized by thermogravimetric analysis and differential scanning calorimetry. The improved mechanical properties of PMMA/clay were characterized by dynamic mechanical analysis. In particular, the enhancement of the thermal properties of the PMMA/clay nanocomposites with reactive modified clay was much more obvious than that of the PMMA/clay nanocomposites with nonreactive clay. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3218–3226, 2003     

The disorderly exfoliated LDHs/PMMA nanocomposites synthesized by in situ bulk polymerization: The effects of LDH-U on thermal and mechanical properties

The disorderly exfoliated layered double hydroxides/poly(methyl methacrylate) (LDHs/PMMA) nanocomposites were obtained in a two-stage process by the in situ bulk polymerization of methyl methacrylate (MMA) in the presence of 10-undecenoate intercalated LDH (LDH-U). The dispersed behavior of the LDH-U in the PMMA matrix was identified by using X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV/visible transmission spectroscopy. All these nanocomposites showed significantly enhancement of glass transition temperature (T_g) and the decomposition temperatures compared to pristine PMMA, as identified in differential scanning calorimetry (DSC) and thermogravimetric (TGA) analysis. The tensile modulus of these nanocomposites was also enhanced by incorporating the LDH-U into the PMMA matrix and increased as the amount of LDH-U increased. According to the analytical method of Ozawa-Flynn, the degradation activation energies of these nanocomposites are higher than that of pristine PMMA.     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

Intercalation of poly(methyl methacrylate) into tyramine-modified layered silicates through hydrogen-bonding interaction

Layered silicates modified with tyramine hydrochloride () were prepared and subsequently used in the preparation of polymer–layered silicate nanocomposites. Accordingly, surfaces of tyramine-modified silicate layers are partially covered with the phenol groups, which are able to form hydrogen bonds with the carbonyl groups of PMMA. In this study the solution-mediated process was applied to prepare two PMMA-based nanocomposites from tyramine-modified montmorillonite and Laponite (TAMMT and TALAP). Through hydrogen bonding, PMMA molecules are absorbed onto the silicate surfaces, and hence silicate layers can be dispersed in the polymer matrix. In the case of using TAMMT whose size is 300–500 nm, the intercalated nanocomposite is obtained. While using TALAP which has the much smaller diameter (25–50 nm) compared to TAMMT, the corresponding nanocomposite exhibits a mixed intercalated/exfoliated morphology. The nano-morphology of the nanocomposites was characterized by means of X-ray diffraction and TEM. FTIR was used to verify the presence of hydrogen bonds between PMMA and the surface phenol groups, and in addition, the interaction between PMMA and the surface oxygens of silicates.     

[Eu（Bipy）2]Cl3和[Tb（Bipy）2]Cl3在有机功能化剥层水滑石表面上的组装及光致发光性质

以乙酰基丙氨基三乙氧基硅烷对剥层镁铝水滑石进行了表面硅烷化修饰,得到了表面硅烷化修饰的剥层水滑石复合材料.然后在该复合材料表面进行了[Eu(Bipy)2]3+和[Tb(Bipy)2]3+分子组装,得到了剥层水滑石复合稀土发光体.组装体的紫外激发发射光谱表明,稀土配合物被组装到经硅烷化试剂修饰的剥层水滑石表面后,其电偶极跃迁较原配合物有很大提高,热稳定性也有提高.从主客体材料相互作用角度对稀土配合物电偶极跃迁的提高进行了解释.     

MgFe2O4@(TF-LDHs)磁性纳米复合体的制备与表征

以镁铁尖晶石(MgFe2O4)颗粒为磁性基质, 采用共沉淀法制备了替加氟(TF)插层层状双金属氢氧化物(LDHs)包覆MgFe2O4的核-壳结构磁性纳米复合体[MgFe2O4@(TF-LDHs)], 并对其化学组成、 晶体结构和磁性等进行了表征, 探讨了TF在LDHs层间的存在状态, 考察了TF的释放行为. 实验结果表明, MgFe2O4@(TF-LDHs)纳米复合体具有顺磁性, 其比饱和磁化强度随磁性基质含量的增大而增强; TF分子在LDHs层间以长轴略倾斜于LDHs层板的方式呈双层排布; MgFe2O4@(TF-LDHs)纳米复合体具有明显的药物缓释效果, 其释放动力学过程符合准二级动力学方程, 释放机理为Fick扩散; 增大磁性基质含量或施加外加磁场均可减缓其药物释放过程.