A Three-Phase Solvent System in High-Speed Counter-Current Chromatographic for the Separation and Purification of Bioactive Constituents from Acanthus ilicifolius

A new three-phase solvent system, n-hexane–acetonitrile–dichloromethane–water–ethyl acetate (5:5:1:5:1.5, v/v/v/v/v) was developed for the high-speed counter-current chromatographic (HSCCC) separation and purification of five bioactive constituents, syringic acid (1), vomifoliol (2), vanillic acid (3), 6-hydroxy-2-benzoxazolinone (4), and 2-benzoxazolinone (5), from Acanthus ilicifolius.

     

Effective on‐line high‐speed shear dispersing emulsifier technique coupled with high‐performance countercurrent chromatography method for simultaneous extraction and isolation of carotenoids from Lycium barbarum L. fruits

An efficient combination strategy based on high‐speed shear dispersing emulsifier technique and high‐performance countercurrent chromatography was developed for on‐line extraction and isolation of carotenoids from the fruits of Lycium barbarum. In this work, the high‐speed shear dispersing emulsifier technique has been employed to extract crude extracts using the upper phase of high‐performance countercurrent chromatography solvent system composed of n‐hexane?dichloromethane?acetonitrile (10:4:6.5, v/v) as the extraction solvent. At the separation stage, the high‐performance counter‐current chromatography process adopts elution–extrusion mode and the upper phase of the solvent system as stationary phase (reverse‐phase mode). As a result, three compounds including zeaxanthin, zeaxanthin monopalmitate, and zeaxanthin dipalmitate with purities of 89, 90, and 93% were successfully obtained in one extraction‐separation operation within 120 min. The targeted compounds were analyzed and identified by high‐performance liquid chromatography, mass spectrometry, and NMR spectroscopy. The results indicated that the present on‐line combination method could serve as a simple, rapid, and effective way to achieve weak polar and unstable compounds from natural products.     

Development of an efficient method for the preparative isolation and purification of chlorophyll a from a marine dinoflagellate Amphidinium carterae by high-speed counter-current chromatography coupled with reversed-phase high-performance liquid chromatography

In our research into chlorophylls of marine dinoflagellates, chlorophyll a was separated rapidly from the hexane extract of Amphidinium carterae in three steps. The first step was silica gel column chromatography, where elution was performed with 0–50% ethyl acetate in n-hexane. The second was high-speed counter-current chromatography using a two-phase solvent system consisting of n-hexane–ethyl acetate–methanol–water (5:5:5:1, v/v), and the third step was preparative reversed-phase high-performance liquid chromatography using a solvent system of acetone–water (89:11, v/v). HPLC analysis showed that the purity of chlorophyll a from the second step was over 83%, and after the third it was over 99%. Thirty milligrams of chlorophyll a was isolated from a crude sample of 250 mg of chlorophylls, and its structure was identified by analyzing its MS, ¹H NMR and ¹³C NMR spectra.     

A novel thin layer chromatography–flame ionization detection method for saturated,asphaltenes, resins,and asphaltenes group-type composition analysis with reverse order of chromatogram development

The methodologies of asphaltenes-containing petroleum materials: saturated, aromatics, resins, asphaltenes group-type composition analysis are performed with the use of column adsorption-desorption or thin layer chromatography (TLC)-flame ionization detection under normal phase conditions with silica gel as the adsorbent. In a three-step procedure, the TLC chromatogram is developed within a decreasing distance by the mobile phase with increasing elution strength (polarity). The n-alkane used in the first step does not dissolve asphaltenes, which leads to the occlusion effect and an underestimation of the percentage of saturated hydrocarbons. In this article, the reverse order of the subsequent elution steps was proposed: the solvent polarity is simultaneously reduced and the chromatogram development distance is increased in the order dichloromethane:methanol 95:5 v/v, 3 cm; toluene, 6 cm; and n-hexane, 10 cm. It was also intentional to reduce the weight of the applied sample to 5 μg for bitumen and 2 μg for asphaltene purity testing. It should be the rule that in stepwise TLC chromatogram development, the first mobile phase is a good solvent for all testing components. The IP 469 procedure should be corrected.     

pH‐zone‐refining elution–extrusion countercurrent chromatography: Separation of hydroxyanthraquinones from Cassiae semen

Seven hydroxyanthraquinones were successfully separated from the traditional Chinese medicinal herb Cassiae semen by conventional and pH‐zone‐refining countercurrent chromatography with an environmentally friendly biphasic solvent system, in which elution–extrusion mode was investigated for pH‐zone‐refining countercurrent chromatography for the first time. A two‐phase solvent system composed of n‐hexane/ethyl acetate/ethanol/water (5:3:4:4, v/v/v/v) was used for the conventional countercurrent chromatography while the same system with a different volume ratio n‐hexane/ethyl acetate/ethanol/water (3:5:2:6, v/v/v/v) was used for pH‐zone‐refining countercurrent chromatography, in which 20 mmol/L of trifluoroacetic acid was added in the organic phase as a retainer and 15 mmol/L of ammonia was added to the aqueous phase as an eluter. A 400 mg crude sample could be well separated by pH‐zone‐refining countercurrent chromatography, yielding 53 mg of aurantio‐obtusin, 40 mg of chryso‐obtusin, 18 mg of obtusin, 24 mg of obtusifolin, 10 mg of emodin, and 105 mg of the mixture of chrysophanol and physcion with a purity of over 95.8, 95.7, 96.9, 93.5, 97.4, 77.1, and 19.8%, as determined by high‐performance liquid chromatography. Furthermore, the difference in elution sequence between conventional and pH‐zone‐refining mode was observed and discussed.     

A new ester coumarin from Ferula Persica wild,indigenous to Iran

Ferula persica wild (Apiaceae) is a perennial herb indigenous to Iran. It has been used in folk medicine for treatment of diabetes, lowering of blood pressure and for antispasmodic, carminative, laxative and expectorant effects in central Iran. Dried ground roots of F. persica (150 g) were extracted sequentially with n-hexane, dichloromethane and methanol (MeOH), 500 ml each, using a Soxhlet apparatus. The n-hexane extract of the roots (3 g) was subjected to vacuum liquid chromatography on silica gel, eluting with solvent mixtures of increasing polarity: 100% n-hexane–ethyl acetate (EtOAc), to yield a number of fractions, Fraction 4 (80% EtOAc in n-hexane) was further analysed by preparative TLC (mobile phase was 12% acetone in chloroform) to yield a coumarin ester (10.1 mg, R_f = 0.31, blue florescent). The structure of the isolated compound was elucidated by spectroscopic means. The compound is 7-O-(4,8,12 -trihydroxy-4,8,12-trimethyl-tridecanoyl)-coumarin, named, ferulone C as a new natural product.     

One‐step isolation of carnosic acid and carnosol from rosemary by centrifugal partition chromatography

Carnosic acid and carnosol are the main bioactive components responsible for the significant antioxidant activity of Rosmarinus officinalis . Nevertheless, they are known for their instability in solutions. Separation of both compounds from crude rosemary extract was successfully achieved by one‐step centrifugal partition chromatography without any degradation. A two‐phase solvent system, hexane/ethyl acetate/methanol/water (3:2:3:2 v/v) was run on a preparative scale applying the elution–extrusion technique in descending mode. A 900 mg quantity of the crude extract containing 39.7% carnosic acid and 12.3% carnosol was loaded onto a 500 mL column, rotating at 1800 rpm. Carnosic acid and carnosol were obtained at purities of 96.1 ± 1% and 94.4 ± 0.9%, with recoveries of 94.3 ± 4.4% and 94.8 ± 2.3%, respectively. The compounds were identified by mass spectrometry, tandem mass spectrometry, and comparison with authentic standards.     

Comprehensive separation of a wide variety of compounds from olive leaves by counter-current chromatography with three-phase solvent system

The three-phase solvent system counter-current chromatography has been of great research interest, because it can separate compounds with a wide range of polarity. The solvent system of n-hexane/methyl tert-butyl ether/acetonitrile/water (5:5:7:5, v/v) was used for counter-current chromatographic comprehensive separation of olive leaves. The study adopted the normal elution mode. The middle phase and the lower phase (at a volume ratio of 7:3) were pumped into the column simultaneously, followed by eluting with the upper, middle, and lower phases in sequence. The retention rate of the stationary phase measured by the experiment was 73.5%. The upper phase was used to elute the nonpolar compounds, then the mobile phase was switched to the middle phase to elute the moderately hydrophobic compounds, finally, the polar compounds were eluted by the lower phase remaining in the chromatographic column. This method successfully separated eight compounds in one step within 270 min and five compounds were identified. The logP values of these five compounds were 7.44, 7.86, 4.16, −0.11, and 0.96, respectively, covering a wide range of polarities. The present study demonstrated that the three-phase solvent has a strong extraction capacity for ingredients from extremely hydrophilic compounds to extremely hydrophobic compounds.     

Preparative separation of anti‐oxidative constituents from Rubia cordifolia by column‐switching counter‐current chromatography

An effective column‐switching counter‐current chromatography (CCC) protocol combining stepwise elution mode was successfully developed for simultaneous and preparative separation of anti‐oxidative components from ethyl acetate extract of traditional Chinese herbal medicine Rubia cordifolia. The column‐switching CCC system was interfaced by a commercial low‐pressure six‐port switching valve equipped with a sample loop, allowing large volume introduction from the first dimension (1^st‐D) to the second dimension (2^nd‐D). Moreover, to extend the polarity window, three biphasic liquid systems composed of n‐hexane/ethyl acetate/methanol/water (1:2:1:2, 2:3:2:3, 5:6:5:6 v/v) were employed using stepwise elution mode in the 1^st‐D. By valve switching technique the whole interested region of 1^st‐D could be introduced to second dimension for further separation with the solvent system 5:5:4:6 v/v. Using the present column‐switching CCC protocol, 500 mg of crude R. cordifolia extract were separated, producing milligram‐amounts of four anti‐oxidative components over 90% pure. Structures of purified compounds were identified by ¹H and ¹³C NMR.     

HPTLC–densitometric and HPTLC–MS methods for analysis of flavonoids

HPTLC silica gel plates without and with fluorescence indicator F₂₅₄ in combination with n-hexane–ethyl acetate–formic acid (20:19:1, v/v/v) as a developing solvent were explored for the HPTLC–densitometric and HPTLC–MS/(MSⁿ) analyses of flavonoids. Pre-development of the plates with chloroform–methanol (1:1, v/v) was needed for reliable HPTLC–densitometric analyses of flavonoid aglycones in the whole R_F range, while 2-step pre-development (1^st methanol–formic acid (10:1, v/v), 2^nd methanol), that decreased background signals of formic acid adducts, was required for HPTLC–MS analyses. Optimization with conditioning of the adsorbent layer with water before development and saturation of the twin trough chamber resulted in required decrease of the R_F values of studied flavonoids (flavone, apigenin, luteolin, chrysin, quercetin dihydrate, myricetin, kaempferide, kaempferol, naringenin, pinocembrin).

Detection was performed based on fluorescence quenching (on the plates with F₂₅₄), natural fluorescence and after post-chromatographic derivatization with natural product reagent without or with further enhancement and stabilization of fluorescent zones with polyethylene glycol (PEG 400 or PEG 4000) or paraffin–n-hexane reagents. For all three reagents, drying temperature and time passed after drying influenced the intensity, which was increasing the first 20?min, and the stability (less than 2?h for PEGs and at least 24?h for paraffin–n-hexane) of the standards’ zones.

Optimal wavelengths for densitometric evaluation were selected based on in-situ absorption spectra scanned before and after derivatization and after stabilization. The developed method was tested via analyses of propolis, roasted coffee, rose hip, hibiscus, rosemary and sage crude extracts. To further increase the reliability of the obtained densitometric results HPTLC–MS/(MSⁿ) analyses of all crude extracts were performed. Several phenolic and non-phenolic compounds were tentatively identified.

Some possible interferences with phenolic acids (chlorogenic acid, rosmarinic acid, protocatechuic acid, gallic acid, syringic acid, ellagic acid, trans-cinnamic acid, o-coumaric acid, m-coumaric acid, p-coumaric acid, caffeic acid, ferulic acid, sinapic acid) that are often present in the extracts together with flavonoids were also examined.     

Thin-layer chromatographic fingerprinting of the nonvolatile fraction extracted from the medicinal herb Cistus incanus L.

ABSTRACT

The aim of this study was to provide the first from-start-to-end thin-layer chromatographic method of fingerprinting the Cistus incanus L. raw herbal material, with a purpose to further use it for rapid screening, authentication, and quality control of the traded C. incanus L. herbs. To this effect, 12 different C. incanus L. samples purchased as herbal teas from a local market were extracted by means of the accelerated solvent extraction (ASE) with chemometrically optimized solvent extraction mixture and temperature (methanol–water, 27:73, v/v; 130°C), to derive the polar fraction from the plant samples. Then, the extracts were developed in two thin-layer chromatographic systems, both using the commercially precoated silica gel 60 chromatographic plates, yet two different mobile phases (mobile phase 1, ethyl acetate–formic acid–acetic acid–water, 100:11:11:13, v/v/v/v, and mobile phase 2, ethyl acetate–dichloromethane–formic acid–acetic acid–water, 100:10:10:10:11, v/v/v/v/v). The chromatograms were densitometrically scanned in the reflectance mode at the wavelength λ?=?366?nm to obtain fingerprints of the extracts derived from individual C. incanus L. samples. Mobile phase 2 performed slightly better, because with its use, the maximum number of 11 peaks could be seen in the respective fingerprints, whereas with mobile phase 1, the maximum number of 10 peaks only. Then an antioxidant potential of the investigated herbal extracts was assessed, making use of mobile phase 2 and the 0.20% methanol solution of 2,2-diphenyl picrylhydrazyl as a visualizing reagent. The resulting chromatograms were densitometrically scanned in the extinction mode at the wavelength λ?=?550?nm to obtain biological fingerprints of the extracts. Finally, chromatographic and biological fingerprints underwent a semiquantitative evaluation in terms of the contents of the extracted polar fraction and an overall antioxidant potential of the individual plant species.     

Combined application of chromatographic techniques for the separation of phenolic compounds from Stenoloma chusanum Ching

High‐speed countercurrent chromatography combined with preparative high‐performance liquid chromatography was successfully used to separate seven phenolic compounds from Stenoloma chusanum Ching. A biphasic solvent system composed of hexane/ethyl acetate/methanol/water (1:2:1:2, v/v) was used for the first step high‐speed countercurrent chromatography separation in elution–extrusion mode. A mobile phase composed of acetonitrile (18%) and pure water (82%) was used for further preparative high‐performance liquid chromatography purification. In total, the combined separation yielded seven compounds, including 3,4‐dihydroxy benzoic acid, 3,4‐dihydroxy benzaldehyde, esculetin, caffeic acid, syringic acid, luteolin, and apigenin, at a purity of over 90%. Esculetin was separated from Stenoloma chusanum Ching for the first time. The results suggest that the proposed combination method is a useful strategy for separating compounds from complex samples.     

Ring-opening polymerization of 1,5-dioxepan-2-one initiated by a cyclic tin–alkoxide initiator in different solvents

Ring-opening polymerization of 1,5-dioxepan-2-one initiated by 1,1,6,6-tetra-n-butyl-1,6-distanna-2,5,7,10-tetraoxacyclodecane was carried out in chloroform, dichloromethane, or 1,2-dichloroethane. Effects of reaction temperature, solvent, and monomer-to-initiator ratio were investigated. Polymerization kinetics showed a first-order dependence on the monomer for polymerization in chloroform and dichloromethane at 40°C. The kinetic order with respect to the initiator were a first order when dichloromethane was used as the solvent, the order in initiator changed, depending on the initiator concentration when chloroform was used. A maximum in molecular weight was observed at 40°C when chloroform was used as the solvent. The change of solvent did not markedly alter the polymerization rate or the molecular weight of the polymers prepared, as expected from the coordination insertion mechanism. Depolymerization of the polymers formed was observed when the reaction was allowed to continue after complete monomer conversion in chloroform as reaction medium at 40°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3407–3417, 1999     

Preparative separation and purification of two highly polar alkaloids derived from Semen Strychni extracted with dichloromethane by high‐speed countercurrent chromatography

Brucine chloromethochloride and strychnine chloromethochloride, the two chloromethochloride derivatives formed during the extraction of Semen Strychni in which dichloromethane was used as the extracting solvent, were isolated and purified by high‐speed countercurrent chromatography for the first time. The two‐phase solvent system composed of chloroform/methanol/0.3 mol/L hydrochloric acid (4:3:2, v/v/v) was selected for separation. From 300 mg of the crude extracts, 56.2 mg of brucine chloromethochloride and 60.2 mg of strychnine chloromethochloride were obtained with the purity of 99.78 and 96.99%, respectively, and the structures were confirmed by mass spectrometry, ¹H, ¹³C, and two‐dimensional NMR spectroscopy. The results indicated that the present method is a powerful technology for large‐scale isolation of alkaloids from Semen Strychni.     

Enrichment and isolation of barbigerone from Millettia pachycarpa Benth. using high‐speed counter‐current chromatography and preparative HPLC

Enrichment of the anti‐tumor compound barbigerone along with a rotenoid derivative from Millettia pachycarpa Benth. was performed by a two‐step high‐speed counter‐current chromatography (HSCCC) separation process. In the first step, 155.8 mg of target fraction (Fra6) was obtained from 400 mg ethyl acetate extract of M. pachycarpa Benth. with an increase in barbigerone from 5.1 to 13% via HSCCC using a solvent system of n‐hexane–ethyl acetate–methanol–water (5:4:5:3, v/v) under normal phase head to tail elution. HSCCC was repeated to eliminate the major contaminant in this initial fraction 6. After a separation time of 65 min, 22.1 mg barbigerone of 87.7% purity was obtained from Fra6 with the ternary solvent system of n‐hexane–methanol–water (2:2:1, v/v) under normal phase elution. Finally, preparative HPLC was employed for the further isolation of barbigerone and the rotenoid derivative. The structures were confirmed by ESI‐MS, ¹H NMR and ¹³C NMR.     

Preparative isolation of huperzines A and B from Huperzia serrata by displacement centrifugal partition chromatography

The pH-zone refining centrifugal partition chromatography technique was used to separate the two acetylcholinesterase inhibitors huperzines A and B from a crude alkaloid extract of the club moss Huperzia serrata. Complete co-elution of huperzines A and B was initially observed with the well-known methyl tert-butyl ether-acetonitrile-water (4:1:5, v/v/v) solvent system with triethylamine (8mM) as the displacer and methane sulfonic acid (6mM) as the retainer. An efficient biphasic system was designed on the basis of solvent association that provided selectivity in the elution mode: n-heptane/ethyl acetate/n-propanol/water (5:15:35:45, v/v/v/v). Lowering the bridge solvent content (n-propanol) of this system increased the polarity difference between the two phases thus adapting it to the pH-zone refining mode. Thus, the purification of these compounds was achieved using the biphasic system n-heptane/ethyl acetate/n-propanol/water (10:30:15:45, v/v/v/v) with triethylamine (8mM) as the displacer and methane sulfonic acid (6mM) as the retainer.     

Preparation of benzoylchitosans and their chiroptical properties in dilute solutions

Two benzoyl substituted chitosan derivatives, 3,6‐O‐dibenzoylchitosan (DBC) and 2‐N‐3,6‐O‐tribenzoylchitosan (TBC), were prepared, and their optical activities in organic solvent were investigated by circular dichroism (CD). For TBC, two splitting bands (a negative one at 288 nm and a positive one at 274 nm) corresponding to the ¹L_b transition of the benzoyl group were observed in chloroform and dichloromethane, while only a negative CD band was recorded in N, N‐dimethylformamide (DMF). These results indicated that the transition moments of benzoyl groups were orderly arranged along the helical polymer chain when TBC was dissolved in a solvent with low polarity, but the same ordered structure did not appear in a polar solvent of DMF. For DBC, only negative CD signals corresponding to the ¹L_b transition of the benzoyl group were observed, regardless of the solvent property, which indicated that the chromophores were not arranged in an ordered fashion with appropriate geometry to interact with one another to induce bi‐signate CD signals. Adding methanol or DMF to the solution of TBC/chloroform resulted in a progressive decrease of the intensity of the positive split band at 274 nm. The intensity of the positive band was weakened upon heating a solution of TBC/chloroform from 20 to 60 °C. The results suggested that the ordered arrangement of the chromophores in the TBC system was dependent on solvent and sensitive to temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4107–4115, 2004     

Enantioseparation of planar chiral ferrocenes on cellulose-based chiral stationary phases: Benzoate versus carbamate pendant groups

In this study, the enantioseparation of 14 planar chiral ferrocenes containing halogen atoms, and methyl, iodoethynyl, phenyl, and 2-naphthyl groups, as substituents, was explored with a cellulose tris(4-methylbenzoate) (CMB)-based chiral column under multimodal elution conditions. n-Hexane/2-propanol (2-PrOH) 95:5 v/v, pure methanol (MeOH), and MeOH/water 90:10 v/v were used as mobile phases (MPs). With CMB, baseline enantioseparations were achieved for nine analytes with separation factors (α) ranging from 1.24 to 1.77, whereas only three analytes could be enantioseparated with 1.14 ≤ α ≤ 1.51 on a cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC)-based column, used as a reference for comparison, under the same elution conditions. Pendant group–dependent reversal of the enantiomer elution order was observed in several cases by changing CMB to CDMPC. The impact of analyte and chiral stationary phase (CSP) structure, and MP polarity on the enantioseparation, was evaluated. The two cellulose-based CSPs featured by different pendant groups were also compared in terms of thermodynamics. For this purpose, enthalpy (ΔΔH°), entropy (ΔΔS°) and free energy (ΔΔG°) differences, isoenantioselective temperatures (T_iso), and enthalpy/entropy ratios (Q), associated with the enantioseparations, were derived from van ’t Hoff plots by using n-hexane/2-PrOH 95:5 v/v and methanol/water 90:10 v/v as MPs. With the aim to disclose the functions of the different substituents in mechanisms and noncovalent interactions underlying analyte–selector complex formation at molecular level, electrostatic potential (V) analysis and molecular dynamics simulations were used as computational techniques. On this basis, enantioseparations and related mechanisms were investigated by integrating theoretical and experimental data.     

An improved method of simultaneous determination of lutein and zeaxanthin in food

Based on an official standard method of lutein analysis, an improved high performance liquid chromatography (HPLC) method for simultaneously detecting lutein and zeaxanthin was developed as focusing on the sample preparation protocol. The optimal pretreatment conditions included a saponification in a water bath for 15?min at a constant temperature of 50?°C, using a 10?mL 60% (w/v) potassium hydroxide solution, followed by extraction using 100?mL mixture of n-hexane, ethyl ether and cyclohexane (40: 40: 20, v/v/v). A mixture of dichloromethane, acetonitrile and methanol (20: 30: 50, v/v/v) was validated to elute lutein and zeaxanthin on a C₃₀ column (4.6?×?250?mm, 5?µm). The resolution between lutein and zeaxanthin is ≥2.5. A millet sample was used for methodological verification and the results showed that the linear relations for lutein and zeaxanthin were good in ranges of 0.23–9.37?μg/mL and 0.30–12.02?μg/mL, respectively. The relative standard deviations of lutein and zeaxanthin were 1.40% and 5.09%, respectively, and their spiked recoveries were between 86.60% and 98.75%. The lutein and zeaxanthin results from this modified HPLC method are superior to those from the Chinese official method and ultrasonic extraction method.     

Effects of chain conformation and chain length on degree of aggregation in assembled particles of conjugated polymer in solvents–nonsolvent: A spectroscopic study

This article explores photophysical properties and aggregation behaviors of conjugated polymer, poly[2‐methoxy, 5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene](MEH?PPV), in various solvent–nonsolvent systems by utilizing UV/vis absorption and photoluminescence (PL) spectroscopy. The isolated chains of MEH‐PPV dispersed in solvents including dichloromethane, chloroform, and tetrahydrofuran adopt either extended or collapsed conformations depending on local polymer–solvent interactions. Aggregation of the MEH‐PPV in these solvents is induced by addition of a poor solvent, cyclohexane. The formation of aggregates is indicated by the appearance of distinct red‐shift peaks in the absorption and PL spectra. The degree of aggregation in each solvent–nonsolvent system is compared by means of absorbance and PL intensity of the aggregate bands. In early stage of the aggregation, the amount of aggregates in system is controlled by the solubility of polymer. When the polymer chains are forced to densely pack within assembled particles by increasing ratio of cyclohexane to 99 v/v %, the conformation of individual chain plays important role. We have found that the extended chains facilitate the aggregation in the assembled particles. Increasing chain length of polymer promotes the aggregation in early stage and densely packed particles. Size distribution of the assembled particles is also found to depend on the choice of solvent. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 894–904, 2010