Determination of Coenzyme II Using Balofloxacin–Terbium(III) as a Fluorescence Probe by Spectrofluorometry

Abstract

A new spectrofluorometric method was developed for determination of coenzyme II. We studied the interactions between balofloxacin–terbium(III) complex and coenzyme II by using ultraviolet–visible absorption and fluorescence spectra. While balofloxacin–terbium(III) was used as a fluorescence probe, under the optimum conditions, coenzyme II could remarkably enhance the fluorescence intensity of the balofloxacin–terbium(III) complex at λ = 545 nm, and the enhanced fluorescence intensity was in proportion to the concentration of coenzyme II. Optimum conditions for the determination of coenzyme II were also investigated. The dynamic range for the determination of coenzyme II was 6.0 × 10^?8 to 6.0 × 10^?6 mol L^?1, and the detection limit (3σ/k) was 3.5 × 10^?8 mol L^?1. This method was simple, practical, and relatively free interference from coexisting substances and could be successfully applied to determination of coenzyme II in synthetic samples. The mechanism of fluorescence enhancement of balofloxacin–terbium(III) complex by coenzyme II was also discussed.     

Effect of silver nanoparticles concentration on the metal enhancement and quenching of ciprofloxacin fluorescence intensity

Concentration effect of silver nanoparticles (AgNPs) on the photophysical properties of ciprofloxacin (Cip) have been investigated using optical absorption and fluorescence techniques. When performed AgNPs solution was added to the Cip solution, metal-enhanced fluorescence intensity and a blue-shift of 20 nm in the maximum emission spectra of Cip has been observed. The enhanced intensity of this system is strongly dependent on the AgNPs concentration and largest at the 6.0 × 10^?6 mol L^?1. With increase of AgNPs concentration, quenching of fluorescence is observed. Stern–Volmer quenching constants have been calculated at four temperatures. The results show the quenching constants are directly correlated with temperature. It indicates the quenching mechanism is the dynamic quenching in nature rather than static quenching. From which we determined the activation energy for the quenching of Cip-AgNPs to be about 31.1 kJ mol^?1. In addition, in the presence of optimum AgNPs concentration, a sensitive fluorimetric method for the determination of ciprofloxacin at the range 5.0 × 10^?7–3.0 × 10^?5 mol L^?1 and the detection limit of 2 × 10^?8 mol L^?1 in solution is proposed.     

Sensitive Determination of Prulifloxacin by Its Fluorescence Enhancement on Terbium(III)–Sodium Dodecylbenzene Sulfonate System

Abstract

A terbium-sensitized fluorescence spectrophotometry method using an anionic surfactant, sodium dodecyl benzene sulphonate (SDBS), was developed for the determination of prulifloxacin (PUFX). It was found that SDBS significantly enhanced the fluorescence intensity of the PUFX–Tb³⁺ complex (about 13-fold). The optimal experimental conditions were determined as follows: excitation and emission wavelengths of 290 nm and 545 nm, pH 8.0, 4.0 × 10^?5 mol L^?1 terbium(III), and 4.0 × 10^?4 mol L^?1 SDBS. The enhanced fluorescence intensity of the system (ΔF) showed a good linear relationship with the concentration of PUFX over the range 6.0 × 10^?8 to 2.0 × 10^?6mol L^?1 with a correlation coefficient of 0.9991. The detection limit (S/N = 3) was determined as 8.5 × 10^?9 mol L^?1. This method has been successfully applied for the determination of PUFX in pharmaceuticals and human urine/serum samples. Compared with most other methods reported, the rapid and simple procedure proposed here offered higher sensitivity, wider linear range, and good stability. The luminescence mechanism of the system was also discussed in detail. In the fluorescence system of PUFX–Tb³⁺–SDBS, SDBS acted not only as the surfactant but also as the energy donor.     

Determination of Sodium Hexametaphosphate in Beverages Based on the Fluorescence Quenching of Acridine Orange

Sodium hexametaphosphate was shown to form a complex with acridine orange by electrostatic interactions that induce fluorescence quenching. Analysis of fluorescence intensity showed that the process was dominated by static quenching, which was confirmed by absorption spectra and lifetime of the excited state. The decreased fluorescence intensity was directly proportional to the concentration of sodium hexametaphosphate between 8.0 × 10^?7 and 1.1 × 10^?5 mol L^?1 with a limit of detection of 5.3 × 10^?7 mol L^?1. Beverages were analyzed for sodium hexametaphosphate with recoveries between 91.7% and 108.3%.     

Enhancement of Fluorescence Intensity of Tramadol and Its Main Metabolites in LC Using Pre-Column Derivatization with 9-Fluorenylmethyl Chloroformate

Tramadol was found to exhibit weak fluorescence with a maximum emission at 300 nm when excited at 200 nm. Also, fluorescence spectra of the drug and its two main metabolites, O-desmethyltramadol and N-desmethyltramadol are not practically identical. Thus low and different sensitivities have been reported for the drug and its metabolites in previously published work. In the present method using 9-fluorenylmethyl chloroformate (FMOC-Cl) as labeling agent, equal and magnified fluorescence intensity were obtained for the analytes. The drug, its metabolites and an internal standard (oseltamivir phosphate) were extracted from serum by dichloromethane. Pre-column derivatization of the analytes was achieved using FMOC-Cl in the presence of borate buffer (0.1 M, pH 7.5). Liquid chromatography with a mobile phase consisting of a mixture of 0.05 M phosphate buffer containing triethylamine (2 ml L^?1; pH = 3.0) and methanol (54:46; v/v) and a Shimpack CLC-ODS column were used for analytical separation of the analytes. The fluorescence of the column effluent was monitored at an excitation and emission wavelengths of 265 and 315 nm, respectively. The analytical method was linear over the concentration range of 1.0–1,280 ng mL^?1 of the parent drug and its metabolites and limit of quantification of 1.0 ng mL^?1 was obtained for the analytes using 10 μL injection. The method validation was studied and the validated method applied in a bioequivalence study of 2 different tramadol preparations in 24 healthy volunteers.     

Cadmium sulfide quantum dots modified by chitosan as fluorescence probe for copper (II) ion determination

CdS quantum dots (QDs) have been prepared and modified with chitosan. Based on the quenching of fluorescence signals of the functionalized CdS QDs at 531 nm wavelength and enhancement of signals the 400–700 nm wavelength range by Cu²⁺ at pH 4.2, a simple, rapid and specific method for Cu²⁺ determination is presented. Under optimum conditions, the relative fluorescence intensity of CdS QDs is linearly proportional to copper concentration from 8.0 nmol L^?1 to 3.0 μmol L^?1 with a detection limit of 1.2 nmol L^?1. The mechanism can be explained in terms of strong binding of Cu²⁺ onto the surface of CdS, resulting in a chemical displacement of Cd²⁺ ions and the formation of CuS on the surface of the QDs.     

Use of Capillary Zone Electrophoresis and Micellar Electrokinetic Chromatography for Separations of Anthraquinone Derivatives

The behavior of seven hydroxy anthraquinone derivatives was studied by capillary zone electrophoresis and micellar electrokinetic chromatography. The effects of buffer pH (6.5–10.8) and sodium dodecyl sulfate concentration (10–20 mmol L^?1) on the effective mobilities of the analytes and their separation were tested. A comparison of the two optimized separation systems showed that micellar electrokinetic chromatography was superior as it permits separation of all the seven analytes within 15 min, using 15 mmol L^?1 sodium dodecyl sulfate in 10 mmol L^?1 tetraborate buffer, pH 8.5, at a voltage of 20 kV. The calibration curves were linear in the concentration range from 5.0 · 10^?7 to 5.0 · 10^?4 mol L^?1 for most of the analytes, at a detection wavelength of 254 nm. LOD and LOQ values of the analytes were in the ranges of 2.10 · 10^?7–1.28 · 10^?6 mol L^?1and 6.99 · 10^?7–4.25 · 10^?6 mol L^?1, respectively. The proposed separation conditions were applied to determination of 1,2-dihydroxy anthraquinone (alizarin) and 1,2,4-trihydroxy anthraquinone (purpurin) in Rubia tinctorum aglycone and of the recently described 1-acetyl-2,4,5,7-tetrahydroxy-9,10-anthraquinone and 1-acetyl-2,4,5,7,8-pentahydroxy-9,10-anthraquinone in the mycelium of fungi Geosmithia lavendula.     

Environmentally friendly method for determination of ammonia nitrogen in fertilisers and wastewaters based on flow injection-spectrophotometric detection using natural reagent from orchid flower

Crude aqueous extract from the orchid ‘Dendrobium Sonia earsakul’ was utilised as a natural product reagent in flow injection analysis (FIA) incorporating a gas diffusion unit (GD) for the determination of ammonia nitrogen. Sample solution was injected into a NaOH donor stream to generate ammonia gas (NH₃). In the GD unit, NH₃ diffused across a PTFE gas-permeable membrane into the acceptor stream of the orchid extract. As the result, the aqueous orchid reagent became more alkaline and its colour changed from purple to green. The change in the colour of orchid acceptor correlated with the concentration of ammonia nitrogen in the sample and its absorbance monitored by a spectrophotometer at 600 nm. Ammonia nitrogen in chemical fertiliser samples and wastewater samples from agricultural fields were determined and reported as %N (w/w) and mg N L^?1, respectively. For chemical fertilisers which contained high content of ammonia nitrogen, a flow rate of 1.0 mL min^?1 and injection volume of 100 µL were used with a linear range of 5–40 mmol L^?1 and detection limit of 2.12 mmol L^?1. However, a higher sensitivity was required for wastewater samples having low ammonia nitrogen content. The flow rate was reduced to 0.3 mL min^?1 and the injection volume increased to 1000 µL. As a result, detection limit of 0.76 mmol L^?1 was achieved with linear range of 1–5 mmol L^?1. The results of our method agreed well with that using the OPA method employing fluorescence detection.     

Simple and rapid surface-enhanced Raman Spectroscopy assay for safranine T and its application in highly sensitive determination of mercury (Ⅱ)

A simple and sensitive surface-enhanced Raman spectroscopy (SERS) method for the detection of safranine T (ST) and Hg²⁺ using silver nanoparticles (AgNPs) as substrate was developed. ST can absorb on the surface of AgNPs through electrostatic interaction, the electromagnetic effect combined with chemical adsorption effect give a notable Raman enhancement for ST. The presence of Hg²⁺ well decreased the absorbed ST molecules on AgNPs, leading to a significant decrease of SERS signals thus enabling to detect Hg²⁺. The determination conditions for SERS, including the amount of AgNPs, the concentration of NaCl, the concentration of HCl, the concentration of ST and the reaction time, were optimised. Under the optimised experimental conditions, good linear responses were obtained for ST and Hg²⁺ in the concentration ranges of 0.01–4.0 μmol L^?1 (3.5–1403.4 ng mL^?1) and 0.01–2.0 μmol L^?1 (2.0–401.2 ng mL^?1), the limit of detection were 3.0 nmol L^?1 (1.1 ng mL^?1) and 2.0 nmol L^?1 (0.4 ng mL^?1), respectively. The present method was subsequently applied to the determination of ST in tomato sauces and Hg²⁺ in environmental waters, the recoveries of ST and Hg²⁺ in spiked samples are 95.5–107.8% and 91.4–110.8 %, respectively.     

Comparison of HPLC Methods for the Determination of Amino Sugars in Soil Hydrolysates

A study on the suitability of chromatographic techniques such as high performance anion exchange chromatography (HPAEC) with fluorescence detection (FL) and pulsed amperometric detection (PAD) and reversed phase (RP) chromatography for the determination of galactosamine, glucosamine, mannosamine, and muramic acid in soil hydrolysates was carried out. The reversed phase fluorescence method was rapid, provided good validation parameters, and employed relatively inexpensive instrumentation. The HPAEC methods had slightly higher limits of quantification, 0.6–5.0 µmol L^?1 (HPAEC-FL) and 1.0–10.0 µmol L^?1 (HPAEC-PAD), compared to the reversed phase fluorescence method (0.5–5.0 µmol L^?1). Various sample pretreatment methods and chromatographic methods were investigated and the advantages and disadvantages of the HPLC methods are discussed.     

Pico-Level Monitoring of Ampicillin by Using a Novel Cerium Fluorescence Probe

In this work, for the first time, a simple and sensitive fluorimetric method for low level determination of ampicillin, a beta-lactam antibiotic drug, using a cerium quenching fluorescence signal was developed. Among the lanthanide ions, cerium has a broad band spectrum in 300–400 nm which is due to the 5d to 4f allowed transition. The employed methodology is based on the formation of a complex formed between Ce³⁺ and ampicillin molecule. The detection limit was 0.0115 ng mL^?1 (33 × 10^?12 mol L^?1).     

New Copper(II) Ion-Selective Membrane Electrode Based on Erythromycin Ethyl Succinate as a Neutral Ionophore

Abstract

The potentiometric response characteristics of a new copper(II) ion-selective PVC membrane electrode based on erythromycin ethyl succinate (EES) as ionophore were investigated. The electrode exhibited a Nernstian response to Cu²⁺ ions over the activity range of 1.5 × 10^?2 to 2.0 × 10^?6 mol L^?1 with a limit of detection of 6.3 × 10^?7 mol L^?1. Stable potentials were obtained in the pH range of 5.5–6.5. The potentiometric selectivity coefficients were calculated by using fixed interference method and revealed no important interferences except for Ag⁺. This electrode was successfully applied as an indicator electrode in determination of copper ions in real water samples.     

Potentiometric sensor for the nanoscale monitoring of Ni2+ ion in environmental samples by the fabrication of coated pyrolytic graphite electrode based on a novel C–C-coupled compound

Novel ligand 5,5?-((3-nitrophenyl)methylene)bis(2,6-diaminopyrimidin-4(3H)-one) (L) was synthesised and characterised. Preliminary studies on L have showed that it has more affinity towards the Ni²⁺ ion. Thus, the L was used as the electroactive material in the fabrication of poly(vinyl chloride) (PVC)-based membrane sensors such as coated graphite electrode (CGE) and coated pyrolytic graphite electrode (CPGE). Several polymeric membranes were fabricated by incorporating L as ionophore, NaTPB as anion excluders and BA, 1-CN, DBP, DOP and o-NPOE as solvent mediators and their effect on potentiometric response studied. Comparative electroanalytical studies performed on the CGE and CPGE depict that the CPGE with optimised membrane composition of L:PVC:o-NPOE:NaTPB in the ratio of 7:33:58:2 (w/w, mg) exhibited the best response in terms of wide working concentration range from 2.0 × 10^?8 to 1.0 × 10^?1 mol L^?1, (3.64 µg L^?1 –18.2 g L^?1) lower detection limit of 8.1 × 10^–9 mol L^?1 (1.47 µg L^?1) with Nernstian compliance of 29.4 ± 0.2 mV decade^?1 of activity of Ni²⁺ ion in the pH range of 3.5–9.0. The sensor can work satisfactorily in water–acetonitrile and water–methanol mixtures. It can tolerate 30% acetonitrile and 20% methanol content in the mixtures. The sensor showed fast response time of 8 s and could be used successfully for a period of 4 months. The sensor reflects its utility in the quantification of Ni²⁺ ion in real samples and has been successfully employed as an indicator electrode in the potentiometric titration of Ni²⁺ ion with EDTA.     

The Host-Guest Chemistry of Proflavine with Cucurbit[6,7,8]urils

The binding of the polyaromatic guest, 3,6-diaminoacridine (Proflavine) to cucurbit[n]uril (CB[n]) where n = 6, 7 and 8 has been studied by fluorescence spectrophotometry and binding constants determined using a least squares fitting method. Titration of CB[8] into a solution of Proflavine results in a 95% decrease in fluorescence up to a CB[8] to Proflavine ratio of 2:1. From the induced fluorescence spectra a binding constant of 1.9 × 10⁷ M^? 1 was determined. When Proflavine is titrated into a solution of CB[8] a similar binding constant is calculated (1.3 × 10⁷ M^? 1). Titration of CB[6] into a solution of Proflavine yields a decrease in fluorescence of 18–20%, but no binding is observed beyond what is seen within experimental error. Finally, titration of CB[7] into a solution of Proflavine results in an increase in fluorescence (32%) and a blue-shift of the emission wavelength from 509 nm to 485 nm. From the induced fluorescence spectra a binding constant of 1.65 × 10⁷ M^? 1 was determined. From ¹H NMR it appears that the decrease in fluorescence for Proflavine with CB[6] and CB[8] is due to collisional quenching, whereas the increase in fluorescence with CB[7] may be due to rotational restriction.     

Photoluminescence investigation of MPA–ZnS QDs interaction with selenite ion

The interaction between water-soluble zinc sulfide quantum dots (ZnS QDs) and selenite ion was investigated by photoluminescence method. The water-soluble ZnS QDs were synthesized using a simple and fast procedure based on the co-precipitation of nanoparticles in an aqueous solution in the presence of 3-mercaptopropionic acid (MPA), as the capping agent. Fluorescence intensity for MPA–ZnS QDs, with a strong fluorescent emission at about 430 nm, decreased in the presence of selenite. The influence of the effective parameters including pH and temperature was investigated. The results showed that under the optimum conditions, the fluorescence intensity change of QDs was linearly proportional to the selenite concentration in the range 4.0 × 10^?5–7.2 × 10^?4 mol L^?1. Moreover, the quenching mechanism was discussed to be a static quenching procedure.     

Inclusion Interactions of Cucurbit[7]uril with Adenine and its Derivatives

Interactions of cucurbit[7]uril (Q[7] host) with guest adenine (g1), adenosine (g2) and 2′,3′-o-isopropylideneadenosine (g3) were studied in details by ¹H NMR, UV absorption spectroscopy, fluorescence spectroscopy and high performance liquid chromatography (HPLC) methods. We found that the suitable pH range for interaction was between 1 and 7, and the optimal pH range was between 2 and 4. The ¹H NMR analysis indicated that Q[7] selectively interacted with the adenine moiety of the guests g1 and g2, while Q[7] selectively interacted with the D-ribose sugar ring moiety of the guest g3. Moreover, ¹H NMR spectra showed that the exchange between the bound guest and the free guest was fast on the NMR time scale for the Q[7]-g1 and Q[7]-g2 systems. However, an obvious equilibrium between the bound host/guest and the unbound host/guest were observed in the Q[7]-g3 complex. Several methods were used to determine quantitatively the stability of the three host–guest inclusion complexes formed between Q[7] and the guests. The formation constants by UV and fluorescence were 1.90 × 10⁵ L mol^? 1 and 1.34 × 10⁵ L mol^? 1 for Q[7]-g1, 9.41 × 10⁴ L mol^? 1 and 4.24 × 10⁴ L mol^? 1 for Q[7]-g2, 4.50 × 10⁴ L mol^? 1 and 3.62 × 10⁴ L mol^? 1 for Q[7]-g3, respectively. HPLC method was also introduced to explore the interactions between Q[7] and the adenine and its derivatives. The formation constants of the host–guest inclusion complexes, as determined by HPLC, were 6.76 × 10⁴ L mol^? 1 for Q[7]-g1, 1.80 × 10⁴ L mol^? 1 for Q[7]-g2, 3.01 × 10⁴ L mol^? 1 for Q[7]-g3 respectively. Our study suggested that Q[7] could be a suitable host for the delivery of bioactive molecules, such as the adenine and its derivatives.     

A fluorescent di-zinc(II) complex of bis-calix[4]arene conjugate as chemosensing-ensemble for the selective recognition of ATP

A triethylene glycol di-imine locked triazole linked bis-calix[4]arene conjugate L has been synthesised and characterised. Conjugate L exhibits high fluorescence enhancement towards Zn²⁺ among the 13 metal ions studied down to a lower detection limit of ～12 ppb. The absorption and visual colour change experiments differentiated the Zn²⁺ from the other metal ions studied. The isolated zinc complex, [Zn₂L] has been used as a chemo-sensing ensemble for the recognition of anions based on their binding affinities towards Zn²⁺. [Zn₂L] was found to be sensitive and selective towards phosphate-bearing species and in particular to adenosine triphosphate (ATP^2 ? ) among the other 20 anions studied as observed based on the changes occurred in the fluorescence intensity. The selectivity of the ATP^2 ?  has been shown on the basis of the changes observed in the emission and absorption spectral studies. The lowest detectable concentration for ATP^2 ?  with the chemo-sensing ensemble [Zn₂L] is 348 ppb in methanol. The fluorescence quenching by the phosphate-based anions has been modelled by molecular mechanics studies and found that the anions possessing two or more phosphate moieties can only bridge between the two zinc centres, and hence those possessing only one phosphate moiety (H₂PO₄^?  and AMP^2 ? ) are ineffective.     

Highly Sensitive Spectrofluorimetric Determination of Trace Amounts of Superoxide Dismutase Using a Prulifloxacin-Terbium(III) Probe

Abstract

A new spectrofluorimetric method was developed for determining superoxide dismutase. The interactions between prulifloxacin (PUFX) –Tb³⁺ complex and superoxide dismutase had been studied by using UV-Vis absorption and fluorescence spectra. Using prulifloxacin–Tb³⁺ as a fluorescence probe, under optimum conditions, superoxide dismutase could remarkably enhance the fluorescence intensity of the prulifloxacin–Tb³⁺ complex at λ = 545 nm, and the enhanced fluorescence intensity was in proportion to the concentration of superoxide dismutase. Optimum conditions for the determination of superoxide dismutase were also investigated. The dynamic range for the determination of superoxide dismutase was 0.032 to 22.56 µg mL^?1, and the detection limit (S/N = 3) was 1.5 ng 4 mL^?1. This method was simple, practical, and relatively free of interference from coexisting substances and could be successfully used to determine superoxide dismutase in the plant and blood samples. The mechanism of fluorescence enhancement of prulifloxacin–Tb³⁺ complex by superoxide dismutase was also discussed.     

Optimization of a sensitive method for the “switch-on” determination of mercury(II) in waters using Rhodamine B capped gold nanoparticles as a fluorescence sensor

Monodisperse and “naked” gold nanoparticles (GNPs) were modified with thioglycolic acid (TGA). The fluorescence of rhodamine B (RB) is quenched completely by the gold NPs surface with negative charge mainly as a result of fluorescence resonance energy transition (FRET) and collision. The quenching mechanism can be described by a Langmuir isotherm, which was systematically investigated by steady-state fluorescence spectrometry and absorption spectrometry. Hg(II) ion disrupts the GNPs–RB pair, producing a large “switch-on” fluorescence. A low background, highly sensitive and reproducible fluorescence assay for Hg(II) is presented. Under the optimum conditions, the restoration fluorescence intensity is proportional to the concentration of Hg(II). The calibration graphs are linear over the range of 1.0?×?10^?9 to 3.1?×?10^?8 mol L^?1 with a detection limit of 4.0?×?10^?10 mol L^?1. The relative standard deviation was 1.2% for a 5.0?×?10^?9 mol L^?1 Hg(II) solution (N?=?6). This method was applied to the analysis of Hg(II) in environmental water samples, and the results were consistent with those of atomic absorption spectroscopy (AAS).     

Interaction Between Ginkgolic Acid and Human Serum Albumin by Spectroscopy and Molecular Modeling Methods

The interaction of ginkgolic acid (15:1, GA) with human serum albumin (HSA) was investigated by FT–IR, CD and fluorescence spectroscopic methods as well as molecular modeling. FT–IR and CD spectroscopic showed that complexation with the drug alters the protein’s conformation by a major reduction of α-helix from 54 % (free HSA) to 46–31 % (drug–complex), inducing a partial protein destabilization. Fluorescence emission spectra demonstrated that the fluorescence quenching of HSA by GA was by a static quenching process with binding constants on the order of 10⁵ L·mol^?1. The thermodynamic parameters (ΔH = ?28.26 kJ·mol^?1, ΔS = 11.55 J·mol^?1·K^?1) indicate that hydrophobic forces play a leading role in the formation of the GA–HSA complex. The ratio of GA and HSA in the complex is 1:1 and the binding distance between them was calculated as 2.2 nm based on the Förster theory, which indicates that the energy transfer from the tryptophan residue in HSA to GA occurs with high probability. On the other hand, molecular docking studies reveal that GA binds to Site II of HSA (sub-domain IIIA), and it also shows that several amino acids participate in drug–protein complexation, which is stabilized by H-bonding.