Synthesis and characterization of 6-[4-(trans -4-pentylcyclohexyl)phenoxy]hexyl acrylate homopolymer and copolymers

The compound 6-[4-(trans -4-pentylcyclohexyl)phenoxy]hexyl acrylate (2) was prepared and homopolymerized. The block copolymer and copolymer of 2 with styrene were synthesized by photopolymerization and solution techniques, respectively. These polymers were characterized by IR and ¹H NMR spectra and size exclusion chromatography. Polarizing optical microscopy (POM) and X-ray diffraction (XRD) studies revealed that these polymers exhibited smectic A (SmA) phases. POM showed that the homopolymer showed a higher order SmA phase than did the block copolymer and copolymer. After magnetically forced alignment the samples exhibited similar optical texture but the domain size of the liquid crystalline phase increased. Differential scanning calorimetry, POM and XRD data suggest that the SmA domain size decreased in the order hompolymer > block copolymer > copolymer.     

Synthesis and mesomorphism of new aliphatic polycarbonates containing side cholesteryl groups

New cholesterol side-functionalised polycarbonate polymers were synthesised by the ring-opening homo- and copolymerisation reaction of the cyclic monomer cholesteryl 5-methyl-2-oxo-1,3-dioxane-5-carboxylate and d,l-lactide using Sn(Oct)₂ as a catalyst. The chemical structures and average molecular weights of the cyclic monomer, homopolymer and block copolymers obtained in this study were characterised using FT-IR, ¹H NMR and gel permeation chromatographic measurement. The mesomorphism and mesophase structure were investigated with polarising optical microscopy, differential scanning calorimetry and X-ray diffraction measurement. As a result, the homopolymer and block copolymers showed an enantiotropic smectic A (SmA) phase. With the concentration of the lactide segment increasing, the glass transition temperature and isotropic temperature of the corresponding block copolymer all decreased. In addition, XRD suggested that the homopolymer and two block copolymers showed the SmA double-layer packing of side chains.     

Synthesis of side‐chain liquid‐crystalline homopolymers and triblock copolymers with p‐methoxyazobenzene moieties and poly(ethylene glycol) as coil segments by atom transfer radical polymerization and their thermotropic phase behavior

A series of side‐chain liquid‐crystalline (LC) homopolymers of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with different degrees of polymerization were synthesized by atom transfer radical polymerization (ATRP), which were prepared with a wide range of number‐average molecular weights from 5.1 × 10³ to 20.6 × 10³ with narrow polydispersities of around 1.17. Thermal investigation showed that the homopolymers exhibit two mesophases, a smectic phase, and a nematic phase, and the phase‐transition temperatures of the homopolymers increase clearly with increasing molecular weights. A series of novel LC coil triblock copolymers with narrow polydispersities was synthesized by ATRP, and their thermotropic phase behavior was investigated with differential scanning calorimetry and polarized optical microscopy. The LC coil triblocks were designed to have an LC conformation of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with a wide range of molecular weights from 3.5 × 10³ to 1.7 × 10⁴ and the coil conformation of poly(ethylene glycol) (PEG) (number‐average molecular weight: 6000 or 12,000) segment. Their characterization was investigated with ¹H NMR, Fourier transform infrared spectra, and gel permeation chromatography. Triblock copolymers exhibited a crystalline phase, a smectic phase, and a nematic phase. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased, and the crystallization of PEG depressed with increasing molecular weight of the LC block. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2854–2864, 2003     

Synthesis of new smectic C* liquid-crystalline block copolymers

A series of smectic C^* liquid-crystalline (LC) block copolymers were successfully synthesized via the living anionic polymerization of polystyrene with optically active methacrylate monomers containing (S)-2-methylbutyl 4-(4-hydroxyphenylcarbonyloxy)-biphenyl-4′-carboxylate mesogens. These materials are the first reported smectic C^* block copolymers. Anionic polymerization in tetrahydrofuran (THF) at −70°C leads to LC block molecular weights of approximately twenty repeating units. The number-average molecular weight of the polystyrene block was varied from 7000 to 20000 to adjust the composition in the block copolymers. Differential scanning calorimetry and optical microscopy indicate that the smectic C^* phase is present in the systems over broad temperature ranges.     

聚｛11-[(4′-正庚氧基-4-联苯基)羰基]氧-1-十一炔｝的相结构与相转变

采用示差扫描量热法(DSC)、一维(1D)、二维(2D)广角X-射线衍射(WAXD)和偏光显微镜(PLM)等研究手段对聚{11-[(4′-正庚氧基-4-联苯基)羰基]氧-1-十一炔}(PA-9,7)的本体相转变和相结构进行研究,并采用分子动力学方法对相结构进行模拟.结果表明,样品的相转变为近晶B相(SmB)近晶A相(SmA)各向同性态(Iso).在近晶B相中,侧链在层状结构中排列成具有六次对称性的准长程有序结构。     

Differences between smectic homo‐ and co‐polysiloxanes as a consequence of microphase separation

This paper compares smectic phases formed from LC‐homo‐ and LC‐co‐polysiloxanes. In the homopolysiloxane, each repeating unit of the polymer chain is substituted with a mesogen, whereas in the copolysiloxanes mesogenic repeating units are separated by dimethylsiloxane units. Despite a rather similiar phase sequence of the homo‐ and co‐polysiloxanes—higher ordered smectic, smectic C* (SmC*), smectic A (SmA) and isotropic—the nature of their phases differs strongly. For the copolymers the phase transition SmC* to SmA is second order and of the ‘de Vries’ type with a very small thickness change of the smectic layers. Inside the SmA phase, however, the smectic thickness decreases strongly on approaching the isotropic phase. For the homopolymer the phase transition SmC* to SmA is first order with a significant thickness change, indicating that this phase is not of the ‘de Vries’ type. This difference in the nature of the smectic phases is probably a consequence of microphase separation in the copolymer, which facilitates a loss of the tilt angle correlation between different smectic layers. This has consequences for the mechanical properties of LC‐elastomers formed from homo‐ and co‐polymers. For the elastomers from homopolymers the smectic layer compression seems to be rather high, while it seems to be rather small for the copolymers.     

Thermotropic liquid–crystalline properties of 4,4′-dialkoxy-3,3′-diaminobiphenyl compounds and their precursors

A series of 4,4?-dialkoxy-3,3?-diaminobiphenyl compounds were synthesised by three-step procedure that involves alkylation, nitration and reduction reactions. Their chemical structures were characterised by FTIR, ¹H and ¹³C spectroscopy and elemental analysis. Their thermotropic liquid–crystalline (LC) properties were examined by a number of experimental techniques including differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarising optical microscopy (POM) and variable temperature X-ray diffraction (VT-XRD). The 4,4?-dialkoxy-3,3?-dinitrobipheyl compounds, precursors to the diamine compounds, were also examined for their thermotropic LC properties. POM studies of focal conic textures and VT-XRD of the 3,3?-diaminobiphenyl derivatives having flexible alkyl chains (C₆–C₁₂) exhibited the smectic A (SmA) phase independent of the length of alkyl chains. Similarly, the 3,3?-dinitrobiphenyl derivatives containing alkyl chains C₇, and C₉–C₁₁ exhibit the SmA phase, those containing C₈ formed the smectic C (SmC) phase and C₁₂ formed both the SmA and smectic B (SmB) phases, respectively. The 3,3?-diaminobiphenyl derivatives had excellent thermal stability in the temperature range of 237–329°C, while those of 3,3?-dinitrobiphenyl derivatives were in the temperature range of 270–321°C. The 3,3?-diaminobiphenyl derivatives emitted UV light both in chloroform and acetonitrile.     

Thermotropic liquid-crystalline properties of extended viologen bis(triflimide) salts

A series of extended, symmetric viologen triflimides were synthesised by the metathesis reaction of lithium triflimide with the respective viologen tosyalates in methanol. Their chemical structures were characterised by Fourier Transform Infrared, ¹H and ¹³C Nuclear Magnetic Resonance spectroscopy and elemental analysis. Their thermotropic liquid-crystalline (LC) properties were examined by a number of experimental techniques including differential scanning calorimetry, thermogravimetric analysis, polarising optical microscopy and variable temperature X-ray diffraction. The viologen salts containing alkyl chain of two carbon and three carbon atoms were relatively low melting salts. Those of alkyl chains of four carbon and five carbon atoms formed ionic liquids at 88 and 42°C, respectively. Those of alkyl chain of 9, 10 and 11 carbon atoms were high melting salts, as high as 166°C. Those of higher alkyl chains of 16, 18 and 20 carbon atoms showed thermotropic LC phases forming SmC, SmA and an unidentified smectic (SmX) phases, and showed SmA to isotropic transitions at high temperatures. As expected, all the viologen triflimides had excellent stabilities in the temperature range of 338–365°C.     

De Vries smectic A phase formed by a liquid crystal side chain copolymer? A 13C NMR study

We study the orientation and order parameter of a liquid crystalline random side chain copolymer by ¹³C NMR. Evidence has previously been presented that this material forms a de Vries smectic A phase. The NMR data show that the molecular tilt angle in the smectic A phase is very small or zero and the smectic A–smectic C* transition is attributed predominantly to a change of the molecular tilt rather than azimuthal ordering. We discuss the NMR results in the context of earlier X‐ray and elastic characterizations of structurally similar materials.     

Synthesis and characterization of liquid crystalline elastomers bearing fluorinated mesogenic units and crosslinking mesogens

Several new side‐chain liquid crystalline (LC) polysiloxanes and elastomers ( IP ‐ VIP ) bearing fluorinated mesogenic units and crosslinking mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a fluorine‐containing LC monomer 4′‐undec‐10‐enoyloxy‐biphenyl‐4‐yl 4‐fluoro‐benzoate and a crosslinking LC monomer 4′‐(4‐allyloxy‐benzoxy)‐biphenyl‐4‐yl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques such as FTIR, ¹H‐NMR, EA, TGA, DSC, POM and XRD. The effect of crosslinking mesogens on mesomorphic properties of the fluorinated LC polymers was studied as well. The obtained polymers and elastomers were soluble in many solvents such as toluene, tetrahydrofuran, chloroform, and so forth. The temperatures at which 5% weight loss occurred (T_d) were greater than 250°C for all the polymers, and the weight of residue near 600°C increased slightly with increase of the crosslinking mesogens in the fluorinated polymer systems. The samples IP , IIP , IIIP and IVP showed both smectic A and nematic phases when they were heated and cooled, but VP and VIP exhibited only a nematic mesophase. The glass transition temperature (T_g) of polymers increased slightly with increase of crosslinking mesogens in the polymer systems, but the mesophase–isotropic phase transition temperature (T_i) and smectic A–nematic mesophase transition temperature (T_S‐N) decreased slightly. It suggests that the temperature range of the mesophase became narrow with the increase of crosslinking mesogens for all the fluorinated polymers and elastomers. In XRD curves, the intensity of sharp reflections at low angle decreased with increase of crosslinking mesogens in the fluorinated polymers systems, indicating that the smectic order derived from fluorinated mesogenic units should be destroyed by introduction of more crosslinking mesogens. Copyright © 2008 John Wiley & Sons, Ltd.     

On the origin of high optical director tilt in a partially fluorinated orthoconic antiferroelectric liquid crystal mixture

We have investigated the orthoconic antiferroelectric liquid crystal mixture W107 by means of optical, X-ray and calorimetry measurements in order to assess the origin of the unusally high tilt angle between the optic axis and the smectic layer normal in this material. The optical birefringence increases strongly below the transition to the tilted phases, showing that the onset of tilt is coupled with a considerable increase in orientational order. The layer spacing in the smectic A* (SmA*) phase is notably smaller than the extended length of the molecules constituting the mixture, and the shrinkage in smectic C* (SmC*) and smectic C_a* (SmC_a*) is much less than the optical tilt angle would predict. These observations indicate that the tilting transition in W107 to a large extent follows the asymmetric de Vries diffuse cone model. The molecules are on average considerably tilted with respect to the layer normal already in the SmA* phase but the tilting directions are there randomly distributed, giving the phase its uniaxial characteristics. At the transition to the SmC* phase, the distribution is biased such that the molecular tilt already present in SmA* now gives a contribution to the macroscopic tilt angle. In addition, there is a certain increase of the average tilt angle, leading to a slightly smaller layer thickness in the tilted phases. Analysis of the wide angle scattering data show that the molecular tilt in SmC_a* is about 20° larger than in SmA*. The large optical tilt (45°) in the SmC_a* phase thus results from a combination of an increased average molecule tilt and a biasing of tilt direction fluctuations.     

Frustrated molecular packing in highly ordered smectic phase of side-chain liquid crystalline polymer with rigid polyacetylene backbone

Using poly(5-{[(4'-heptoxy-4-biphenylyl)carbonyl]oxy}-1-pentyne) as an example, we demonstrate the incorporative accommodation of the rigid polyacetylene backbones and the mesogenic pendants, which leads to a highly ordered smectic (Sm) phase with a frustrated structure. The polymer exhibits a recognizable sheetlike molecular shape due to its rigid backbone and relatively short spacer (three methylene units), and the building block of the liquid crystalline (LC) phase is the whole molecule. In the LC phase, five layers of the molecules stack as a smectic A (SmA) block, and adjacent SmA blocks glide halfway of the molecular width from one to another. In scanning tunneling microscopy (STM) experiments, the STM tip scrape is found to generate a regular nanopattern with periodic electron conductivity, of which the spacing is determined by the side-chain length.     

Preparation of Oriented Liquid‐Crystalline/Isotropic Block Copolymer Films with Parallel or Perpendicular Arrangement of Smectic Layers and Lamellar Microdomains

Films of a symmetric liquid‐crystalline/isotropic block copolymer consisting of a smectic LC side‐chain polymer and polystyrene were prepared by solvent casting from solution and from the isotropic melt. By annealing the solvent‐cast film in the S_A phase an oriented microphase‐separated film of lamellar morphology was obtained in which both the lamellae of the block copolymer and the smectic layers of the LC block were oriented parallel to the film surface. A lamellar morphology with perpendicular orientation of lamellae and smectic layers was generated by cooling the block copolymer from the melt.     

Differences between smectic homo- and co-polysiloxanes as a consequence of microphase separation

This paper compares smectic phases formed from LC-homo- and LC-co-polysiloxanes. In the homopolysiloxane, each repeating unit of the polymer chain is substituted with a mesogen, whereas in the copolysiloxanes mesogenic repeating units are separated by dimethylsiloxane units. Despite a rather similiar phase sequence of the homo- and co-polysiloxanes—higher ordered smectic, smectic C* (SmC*), smectic A (SmA) and isotropic—the nature of their phases differs strongly. For the copolymers the phase transition SmC* to SmA is second order and of the 'de Vries' type with a very small thickness change of the smectic layers. Inside the SmA phase, however, the smectic thickness decreases strongly on approaching the isotropic phase. For the homopolymer the phase transition SmC* to SmA is first order with a significant thickness change, indicating that this phase is not of the 'de Vries' type. This difference in the nature of the smectic phases is probably a consequence of microphase separation in the copolymer, which facilitates a loss of the tilt angle correlation between different smectic layers. This has consequences for the mechanical properties of LC-elastomers formed from homo- and co-polymers. For the elastomers from homopolymers the smectic layer compression seems to be rather high, while it seems to be rather small for the copolymers.     

On the interaction of the morphological structure and the LC behaviour of LC side group block copolymers

The interaction between morphological structure and phase behaviour of a LC side group block copolymer has been investigated using DSC, TEM and small angle X-ray diffraction. All samples of Polystyrene-block-2-(3-cholesteryloxycarbonyloxy)ethyl methacrylate (PS-b-PChEMA) show a phase separation between the two blocks. It was found that in the case of those samples where the liquid crystalline sub-phase is not continuous (spheres), only a nematic phase is seen, whereas in all samples in which there is a continuous liquid crystalline sub-phase, the smectic A phase of the homopolymer is formed. On the other hand, the block copolymer seems to stabilize the LC phase; no dependency of the clearing temperatures on the molecular weight of the LC blocks has been observed.     

Polarized infrared spectroscopic study on changes in molecular orientation and interaction during phase transitions of a ferroelectric liquid crystal with a naphthalene ring

Temperature-dependent polarized infrared spectra were measured over the temperature range 105-30°C for a ferroelectric liquid crystal with a naphthalene ring (FLC-1) in the isotropic, smectic A (SmA), and chiral smectic C (SmC*) phases to investigate its molecular conformation, interactions, and alignment in each phase. It has been found, from the temperaturedependent spectral changes in the 1610-1600 cm^-1 region, that the degree of twist between the naphthalene and benzene rings of FLC-1 changes with temperature. The peak intensity of the band at 1606 cm^-1 containing contributions from both the benzene and naphthalene ring stretching modes begins to decrease, not suddenly but gradually, upon going from the SmA phase to the SmC* phase, suggesting that the molecular orientation of the two rings changes gradually between the two phases. The frequencies of two CH₂ stretching bands suggest that the disorder of the alkyl chain of FLC-1 is similar for the liquid crystal phase and the isotropic liquid phase. The splitting of the core C=O stretching band indicates that the resonance system consisting of the benzene ring and the C=O group in the core part of FLC-1 is involved in two kinds of intermolecular interaction between adjacent molecules in the liquid crystal phase.     

Temperature dependent light transmission-light scattering switching of (homeotropic liquid crystalline polymer network/liquid crystals/chiral dopant) composite film

A (photo-polymerizable liquid crystal (LC) monomer/LCs/chiral dopant/photoinitiator) mixture with a smectic A (SmA)-chiral nematic (N*) phase transition was sandwiched between two ITO glass substrates which were not subjected to any surface orientation treatment. When an electric field-induced homeotropically oriented SmA phase of the mixture was irradiated with UV light, an oriented liquid crystalline polymer (LCP) network was formed upon photo-polymerization of the LC monomer. Then, a (homeotropically oriented LCP network/LCs/chiral dopant) composite with a SmA-N* phase transition was prepared. A focal-conic texture appeared in the heat-induced N* phase of the composite upon heating from the transparent state of the homeotropically oriented SmA phase; the focal-conic texture exhibited strong light scattering. Upon cooling the composite to the SmA phase, this phase was again homeotropically oriented due to the strong intermolecular interaction between the LC molecules and the homeotropically oriented LCP network. Thus, the transparent state of the SmA phase and the light scattering state of the N* phase occurred reversibly upon cooling and heating, accompanied by the thermal SmA-N* phase transition.     

Temperature dependent light transmission-light scattering switching of (homeotropic liquid crystalline polymer network/liquid crystals/chiral dopant) composite film

A (photo-polymerizable liquid crystal (LC) monomer/LCs/chiral dopant/photoinitiator) mixture with a smectic A (SmA)-chiral nematic (N*) phase transition was sandwiched between two ITO glass substrates which were not subjected to any surface orientation treatment. When an electric field-induced homeotropically oriented SmA phase of the mixture was irradiated with UV light, an oriented liquid crystalline polymer (LCP) network was formed upon photo-polymerization of the LC monomer. Then, a (homeotropically oriented LCP network/LCs/chiral dopant) composite with a SmA-N* phase transition was prepared. A focal-conic texture appeared in the heat-induced N* phase of the composite upon heating from the transparent state of the homeotropically oriented SmA phase; the focal-conic texture exhibited strong light scattering. Upon cooling the composite to the SmA phase, this phase was again homeotropically oriented due to the strong intermolecular interaction between the LC molecules and the homeotropically oriented LCP network. Thus, the transparent state of the SmA phase and the light scattering state of the N* phase occurred reversibly upon cooling and heating, accompanied by the thermal SmA-N* phase transition.     

Chiral Liquid Crystals Synthesized from 2(S)‐[2(R)‐Methylhexyloxy]Propanol and its (S,S)‐Diastereomer

Two new chiral alcohols, 2(S)‐[2(R)‐methylhexyloxy]propanol ( 5 ) and 2(S)‐[2(S)‐methylhexyloxy]propanol ( 6 ), were prepared from the corresponding propionic acid ethyl ester 1 and 2 in the presence of sodium borohydride. They were used as the chiral moiety for the synthesis of two diastereomeric liquid crystals 7 and 8 . Both of them exhibit the phase sequence I‐SmA‐SmC*‐SmX‐Cr. The mesogenic properties of the (S,S)‐diastereomer 8 are more unique in comparison with those of the (S,R)‐diastereomer 7. It possesses not only lower SmA and SmC* phase transition temperature, 103 °C vs. 112 °C for SmA phase and 31 °C vs. 65 °C for SmC* phase, but wider SmA and SmC* phase range, 40 °C vs. 31 °C for SmA phase and 72 °C vs. 47 °C for SmC* phase. The diastereomer 8 also has a larger Ps value than that of 7, 24 vs. 15 nC cm^?2 measured at Tc ‐ T = 10 °C. The difference in these mesogenic properties is discussed by comparing their conformation difference at the molecular part of benzoate.     

On the interaction of the morphological structure and the LC behaviour of LC side group block copolymers

The interaction between morphological structure and phase behaviour of a group of LC side group block copolymers have been investigated using DSC, TEM and small angle X-ray diffraction. Generally, phase separation between the two blocks was observed. It was found that in the case of those samples, where the liquid crystalline sub-phase is not continuous (spheres), only a nematic phase is seen, whereas in all samples in which there is a continuous liquid crystalline sub-phase, the smectic A phase of the homopolymer is formed. On the other hand, the block copolymer seems to stabilise the LC-phase and the polymer properties in general, no dependency of the clearing temperatures and of the glass transition temperatures from the molecular weight of the LC blocks has been detected.