Au130−xAgx Nanoclusters with Non‐Metallicity: A Drum of Silver‐Rich Sites Enclosed in a Marks‐Decahedral Cage of Gold‐Rich Sites

The synthesis and structure of atomically precise Au_130?xAg_x (average x=98) alloy nanoclusters protected by 55 ligands of 4‐tert‐butylbenzenethiolate are reported. This large alloy structure has a decahedral M₅₄ (M=Au/Ag) core. The Au atoms are localized in the truncated Marks decahedron. In the core, a drum of Ag‐rich sites is found, which is enclosed by a Marks decahedral cage of Au‐rich sites. The surface is exclusively Ag?SR; X‐ray absorption fine structure analysis supports the absence of Au?S bonds. The optical absorption spectrum shows a strong peak at 523 nm, seemingly a plasmon peak, but fs spectroscopic analysis indicates its non‐plasmon nature. The non‐metallicity of the Au_130?xAg_x nanocluster has set up a benchmark to study the transition to metallic state in the size evolution of bimetallic nanoclusters. The localized Au/Ag binary architecture in such a large alloy nanocluster provides atomic‐level insights into the Au?Ag bonds in bimetallic nanoclusters.     

One‐step Synthesis of AuAg Alloy Nanodots and its Electrochemical Studies towards Nitrobenzene Reduction and Sensing

Efficient, stable, and low‐cost electrocatalysts for the degradation and sensing of environment pollutants are essential components of clean environment monitoring. Here we report, one‐step synthesis and characterization of 1–3 nm diameter sized bi‐metallic AuAg nanodots (NDs) embedded in amine functionalized silicate sol‐gel matrix (SSG) and its electrochemical studies toward nitrobenzene. The SSG was used as a reducing agent as well as stabilizer for the prepared mono‐ and bi‐metallic nanoparticles (NPs). From the HRTEM, STEM‐EDS and XPS analyses, the bi‐metallic AuAg NDs were identified as an alloy and not the mixtures of Au and Ag NPs. Characteristic surface plasmon resonance (SPR) band between the Au and Ag NPs SPR absorption region was noticed for the prepared AuAg NDs. The AuAg alloy NDs with different concentrations of Au and Ag (Au₂₅Ag₇₅, Au₅₀Ag₅₀ and Au₇₅Ag₂₅ NDs) modified electrodes exhibited synergistic electrocatalytic effect than did the Au and Ag NPs towards nitrobenzene reduction and detection. Together with ultra‐small size and exceptional colloidal stability features within these SSG‐AuAg NDs pave convenient way for nanotechnology‐based catalysts development and sensor applications.     

Balancing the Rate of Cluster Growth and Etching for Gram‐Scale Synthesis of Thiolate‐Protected Au25 Nanoclusters with Atomic Precision

We report a NaOH‐mediated NaBH₄ reduction method for the synthesis of mono‐, bi‐, and tri‐thiolate‐protected Au₂₅ nanoclusters (NCs) with precise control of both the Au core and thiolate ligand surface. The key strategy is to use NaOH to tune the formation kinetics of Au NCs, i.e., reduce the reduction ability of NaBH₄ and accelerate the etching ability of free thiolate ligands, leading to a well‐balanced reversible reaction for rapid formation of thermodynamically favorable Au₂₅ NCs. This protocol is facile, rapid (≤3 h), versatile (applicable for various thiolate ligands), and highly scalable (>1 g Au NCs). In addition, bi‐ and tri‐thiolate‐protected Au₂₅ NCs with adjustable ratios of hetero‐thiolate ligands were easily obtained. Such ligand precision in molecular ratios, spatial distribution and uniformity resulted in richly diverse surface landscapes on the Au NCs consisting of multiple functional groups such as carboxyl, amine, and hydroxy. Analysis based on NMR spectroscopy revealed that the hetero‐ligands on the NCs are well distributed with no ligand segregation. The unprecedented synthesis of multi‐thiolate‐protected Au₂₅ NCs may further promote the practical applications of functional metal NCs.     

Unraveling the Impact of Gold(I)–Thiolate Motifs on the Aggregation‐Induced Emission of Gold Nanoclusters

Aggregation‐induced emission (AIE) provides an efficient strategy to synthesize highly luminescent metal nanoclusters (NCs), however, rational control of emission energy and intensity of metal NCs is still challenging. This communication reveals the impact of surface Au^I‐thiolate motifs on the AIE properties of Au NCs, by employing a series of water‐soluble glutathione (GSH)‐coordinated Au complexes and NCs as a model ([Au₁₀SR₁₀], [Au₁₅SR₁₃], [Au₁₈SR₁₄], and [Au₂₅SR₁₈]^?, SR=thiolate ligand). Spectroscopic investigations show that the emission wavelength of Au NCs is adjustable from visible to the near‐infrared II (NIR‐II) region by controlling the length of the Au^I‐SR motifs on the NC surface. Decreasing the length of Au^I‐SR motifs also changes the origin of cluster luminescence from AIE‐type phosphorescence to Au⁰‐core‐dictated fluorescence. This effect becomes more prominent when the degree of aggregation of Au NCs increases in solution.     

The Origin of the Photoluminescence Enhancement of Gold‐Doped Silver Nanoclusters: The Importance of Relativistic Effects and Heteronuclear Gold–Silver Bonds

The weak photoluminescence of silver nanoclusters prevents their broad application as luminescent nanomaterials. Recent experiments, however, have shown that gold doping can significantly enhance the photoluminescence intensity of Ag₂₉ nanoclusters but the molecular and physical origins of this effect remain unknown. Therefore, we have computationally explored the geometric and electronic structures of Ag₂₉ and gold‐doped Ag_29?xAu_x (x=1–5) nanoclusters in the S₀ and S₁ states. We found that 1) relativistic effects that are mainly due to the Au atoms play an important role in enhancing the fluorescence intensity, especially for highly doped Ag₂₆Au₃, Ag₂₅Au₄, and Ag₂₄Au₅, and that 2) heteronuclear Au?Ag bonds can increase the stability and regulate the fluorescence intensity of isomers of these gold‐doped nanoclusters. These novel findings could help design doped silver nanoclusters with excellent luminescence properties.     

Improved Photocatalytic Activity and Stability of Nano‐sized Ag/Ag2CO3 Plasmonic Photocatalyst by Surface Modification of Fe(III) Nanocluster

The surface modification of Ag/Ag₂CO₃ with Fe(III) ions has been achieved through simply photoreduction‐impregnation method. The obtained products were characterized by means of X‐ray diffraction (XRD), scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), and UV‐vis absorption spectroscopy. Under visible‐light irradiation (γ>420 nm), the Fe(III)/Ag/Ag₂CO₃ sample displays a higher photocatalytic activity and stability than pure Ag₂CO₃ and Ag/Ag₂CO₃ samples for the degradation of methyl orange (MO). The improved photocatalytic activity and stability of this ternary system could be ascribed to the synergetic effect between Ag nanoparticles and Fe(III) nanocluster. The metallic Ag nanoparticles cause an obviously enhanced visible‐light absorption to produce more photogenerated charges, while the Fe(III) works as an active site for the following oxygen reduction to reduce the recombination rate of photogenerated electrons and holes.     

Control of the Fluorescence of DNA‐templated Silver Nanoclusters by Adenosine Triphosphate and Mercury(II)

Several DNA templates with the sequence 5′‐T _n TAACCCCTAACCCCT ‐3′ (n = 0, 15, 30, and 45) were used to prepare DNA template–silver nanoclusters (DNA –Ag NCs ). The T _n sequence acts as a recognition element for Hg²⁺, while the rest of the sequence acts as a template for DNA –Ag NCs . At pH 3.0, the fluorescence intensity of DNA –Ag NCs is enhanced by ATP , and the enhanced fluorescence is quenched by Hg²⁺. The length of polyT shows a slight effect on the sensitivity for the detection of Hg²⁺ but almost no effect on the optical properties of DNA –Ag NCs . The fluorescence response of DNA –Ag NCs (T₁₅‐DNA –Ag NCs ) vs. Hg²⁺ concentration shows two linear ranges over 10–100 and 100–1000 nM , mainly because of the fluorescence quenching due to DNA conformational changes through T–Hg²⁺–T coordination and the formation of an amalgam with Ag NCs , respectively. The sensitivity of the T₁₅‐DNA –Ag NC probe was validated through the analysis of Hg²⁺ in spiked pond water. Based on the switch‐on and switch‐off fluorescence properties of T₁₅‐DNA –Ag NCs , an IMPLICATION logic gate was fabricated using the concentrations of ATP and Hg²⁺ as inputs and the fluorescence intensity at 585 nm as output.     

Silver(I) Complexes with Dithioether Ligands: Syntheses,Crystal Structures,and Fluorescence Properties

Two new dithioether ligands, 1,4‐bis[(phenylsulfanyl)methyl]naphthalene ( L¹ ), and 4,4′‐bis[(tert‐butylsulfanyl)methyl]biphenyl ( L² ) were synthesized and their silver(I) complexes were studied. Both Ag^I complexes, [Ag L¹ (NO₃)]_n ( 1 ) and [Ag L² (NO₃)]₂ ( 2 ), were synthesized at ambient temperature and characterized by elemental analysis, IR spectroscopy, and single‐crystal X‐ray diffraction analysis. Single‐crystal X‐ray analysis shows that complex 1 has a one‐dimensional helical chain structure with the neutral repeating unit [Ag(μ₂‐ L¹ )(NO₃)], whereas complex 2 has a centrosymmetrical neutral dinuclear structure. Moreover, complexes 1 and 2 are further extended into three‐dimensional supramolecular frameworks by hydrogen bonding and π–π stacking interactions, respectively. In addition, complexes 1 and 2 display strong blue emission in the solid state at room temperature.     

Small Gold(I) and Gold(I)–Silver(I) Clusters by C−Si Auration

Auration of o-trimethylsilyl arylphosphines leads to the formation of gold and gold–silver clusters with ortho-metalated phosphines displaying 3c–2e Au−C−M bonds (M=Au/Ag). Hexagold clusters [Au₆L₄](X)₂ are obtained by reaction of (L−TMS)AuCl with AgX, whereas reaction with AgX and Ag₂O leads to gold–silver clusters [Au₄Ag₂L₄](X)₂. Oxo-trigold(I) species [Au₃O]⁺ were identified as the intermediates in the formation of the silver-doped clusters. Other [Au₅], [Au₄Ag], and [Au₁₂Ag₄] clusters were also obtained. Clusters containing PAu−Au−AuP structural motif display good catalytic activity in the activation of alkynes under homogeneous conditions.     

Photothermal Oxidation of Cinnamyl Alcohol with Hydrogen Peroxide Catalyzed by Gold Nanoparticle/Antimony-Doped Tin Oxide Nanocrystals

Gold nanoparticles with different mean sizes were formed on antimony-doped tin oxide nanocrystals by the temperature-varied deposition-precipitation method (Au/ATO NCs). Au/ATO NCs possess strong absorption in the near-infrared region due to Drude excitation in addition to the localized surface plasmon resonance (LSPR) of AuNPs around 530 nm. Au/ATO NCs show thermally activated catalytic activity for the oxidation of cinnamyl alcohol to cinnamaldehyde by hydrogen peroxide. The catalytic activity increases with a decrease in the mean Au particle size (d_Au) at 5.3 nm≤d_Au≤8.2 nm. Light irradiation (λ_ex >660 nm, ∼0.5 sun) of Au/ATO NCs increases the rate of reaction by more than twice with ∼95 % selectivity. Kinetic analyses indicated that the striking enhancement of the reaction stems from the rise in the temperature near the catalyst surface of ∼30 K due to the photothermal effect of the ATO NCs.     

An Atomically Precise Au10Ag2 Nanocluster with Red–Near‐IR Dual Emission

A red–near‐IR dual‐emissive nanocluster with the composition [Au₁₀Ag₂(2‐py?C≡C)₃(dppy)₆](BF₄)₅ ( 1 ; 2‐py?C≡C is 2‐pyridylethynyl, dppy=2‐pyridyldiphenylphosphine) has been synthesized. Single‐crystal X‐ray structural analysis reveals that 1 has a trigonal bipyramidal Au₁₀Ag₂ core that contains a planar Au₄(2‐py?C≡C)₃ unit sandwiched by two Au₃Ag(dppy)₃ motifs. Cluster 1 shows intense red–NIR dual emission in solution. The visible emission originates from metal‐to‐ligand charge transfer (MLCT) from silver atoms to phosphine ligands in the Au₃Ag(dppy)₃ motifs, and the intense NIR emission is associated with the participation of 2‐pyridylethynyl in the frontier orbitals of the cluster, which is confirmed by a time‐dependent density functional theory (TD‐DFT) calculation.     

Facile Synthesis of Ag/Ag3PO4 Composites with Highly Efficient and Stable Photocatalytic Performance under Visible Light

The Ag/Ag₃PO₄ composites with various shapes (spheres, polyhedral, and microcubes) were synthesized by a facile precipitation method and a subsequent light‐reduction route at room temperature. The as‐prepared Ag/Ag₃PO₄ composites were characterized in detail by X‐ray diffraction, Fourier transform infrared spectra, X‐ray photoelectron spectroscopy, scanning electron microscopy, UV–vis diffuse reflection, and photoluminescence spectroscopy. The growth processes of different morphologies Ag/Ag₃PO₄ composites are also discussed. The decomposition test of rhodamine B (RhB) indicated that the Ag/Ag₃PO₄ composites enhanced the photocatalytic performance compared with pure Ag₃PO₄, which was attributed to the surface plasmon resonance (SPR) of Ag nanoparticles and the stability of the photocatalysts. Moreover, uniform cubes of Ag/Ag₃PO₄ showed the highest photocatalytic activity and could completely degrade RhB in 7 min, which could be primarily ascribed to the cubic structure of Ag/Ag₃PO₄ with strong visible‐light absorption and efficient separation of the photo‐generated electrons and holes. Furthermore, the possible photocatalytic mechanism is also discussed.     

Cytochrome c‐Capped Fluorescent Gold Nanoclusters: Imaging of Live Cells and Delivery of Cytochrome c

Cytochrome c‐capped fluorescent gold nanoclusters (Au‐NCs) are used for imaging of live lung and breast cells. Delivery of cytochrome c inside the cells is confirmed by covalently attaching a fluorophore (Alexa Fluor 594) to cytochrome c‐capped Au‐NCs and observing fluorescence from Alexa 594 inside the cell. Mass spectrometry studies suggest that in bulk water, addition of glutathione (GSH) to cytochrome c‐capped Au‐NCs results in the formation of glutathione‐capped Au‐NCs and free apo‐cytochrome c. Thus glutathione displaces cytochrome c as a capping agent. Using confocal microscopy, the emission spectra and decay of Au‐NCs are measured in live cells. From the position of the emission maximum it is shown that the Au‐NCs exist as Au₈ in bulk water and as Au₁₃ inside the cells. Fluorescence resonance energy transfer from cytochrome c–Au‐NC (donor) to Mitotracker Orange (acceptor) indicates that the Au‐NCs localise in the mitochondria of live cells.     

Cancer Cell Imaging Using in Situ Generated Gold Nanoclusters

In situ generated fluorescent gold nanoclusters (Au‐NCs) are used for bio‐imaging of three human cancer cells, namely, lung (A549), breast (MCF7), and colon (HCT116), by confocal microscopy. The amount of Au‐NCs in non‐cancer cells (WI38 and MCF10A) is 20–40 times less than those in the corresponding cancer cells. The presence of a larger amount of glutathione (GSH) capped Au‐NCs in the cancer cell is ascribed to a higher glutathione level in cancer cells. The Au‐NCs exhibit fluorescence maxima at 490–530 nm inside the cancer cells. The fluorescence maxima and matrix‐assisted laser desorption ionization (MALDI) mass spectrometry suggest that the fluorescent Au‐NCs consist of GSH capped clusters with a core structure (Au_8‐13). Time‐resolved confocal microscopy indicates a nanosecond (1–3 ns) lifetime of the Au‐NCs inside the cells. This rules out the formation of aggregated Au–thiolate complexes, which typically exhibit microsecond (≈1000 ns) lifetimes. Fluorescence correlation spectroscopy (FCS) in live cells indicates that the size of the Au‐NCs is ≈1–2 nm. For in situ generation, we used a conjugate consisting of a room‐temperature ionic liquid (RTIL, [pmim][Br]) and HAuCl₄. Cytotoxicity studies indicate that the conjugate, [pmim][AuCl₄], is non‐toxic for both cancer and non‐cancer cells.     

Silver Quantum Cluster (Ag9)‐Grafted Graphitic Carbon Nitride Nanosheets for Photocatalytic Hydrogen Generation and Dye Degradation

We report the visible‐light photocatalytic properties of a composite system consisting of silver quantum clusters [Ag₉(H₂MSA)₇] (H₂MSA=mercaptosuccinic acid) embedded on graphitic carbon nitride nanosheets (AgQCs‐GCN). The composites were prepared through a simple chemical route; their structural, chemical, morphological, and optical properties were characterized by using X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy, transmission electron microscopy, UV/Vis diffuse reflectance spectroscopy, and photoluminescence spectroscopy. Embedment of [Ag₉(H₂MSA)₇] on graphitic carbon nitride nanosheets (GCN) resulted in extended visible‐light absorption through multiple single‐electron transitions in Ag quantum clusters and an effective electronic structure for hydroxyl radical generation, which enabled increased activity in the photocatalytic degradation of methylene blue and methyl orange dye molecules compared with pristine GCN and silver nanoparticle‐grafted GCN (AgNPs‐GCN). Similarly, the amount of hydrogen generated by using AgQCs‐GCN was 1.7 times higher than pristine GCN. However, the rate of hydrogen generated using AgQCs‐GCN was slightly less than that of AgNPs‐GCN because of surface hydroxyl radical formation. The plausible photocatalytic processes are discussed in detail.     

A 200‐fold Quantum Yield Boost in the Photoluminescence of Silver‐Doped AgxAu25−x Nanoclusters: The 13 th Silver Atom Matters

The rod‐shaped Au₂₅ nanocluster possesses a low photoluminescence quantum yield (QY=0.1 %) and hence is not of practical use in bioimaging and related applications. Herein, we show that substituting silver atoms for gold in the 25‐atom matrix can drastically enhance the photoluminescence. The obtained Ag_xAu_25?x (x=1–13) nanoclusters exhibit high quantum yield (QY=40.1 %), which is in striking contrast with the normally weakly luminescent Ag_xAu_25?x species (x=1–12, QY=0.21 %). X‐ray crystallography further determines the substitution sites of Ag atoms in the Ag_xAu_25?x cluster through partial occupancy analysis, which provides further insight into the mechanism of photoluminescence enhancement.     

Carbon Monoxide: A Mild and Efficient Reducing Agent towards Atomically Precise Gold Nanoclusters

In recent years, thiolate‐protected gold nanoclusters (or thiolated Au NCs) with a core size below 2 nm have emerged as a new class of multifunctional nanoparticles because of their unique molecular‐like properties and the potential to use these properties in many practical applications. A general synthesis of Au NCs may involve the use of a strong reducing agent (e.g., sodium borohydride (NaBH₄)), which often leads to the formation of mix‐sized Au NCs if no delicate control is applied. To obtain atomically precise Au NCs, additional physical or chemical selection processes (e.g., high‐resolution separation or size‐focusing) are required, which are difficult to be scaled up or are limited to only thermodynamically stable products. By introducing a milder reducing agent – carbon monoxide (CO) – both stable and metastable thiolated Au NCs, including Au_10–12, Au₁₅, Au₁₈, Au₂₅, and Au₂₉, can be synthesized in a one‐pot manner. In addition, CO reduction also enables the synthesis of a highly luminescent Au₂₂(SG)₁₈ NC. Furthermore, the intermediates of Au NC growth can be tracked in the CO‐reduction system due to the mild and readily stoppable nature of CO reduction. Therefore, the use of CO reduction may bring new flexibilities in designing synthetic strategies and understanding the growth mechanism of atomically precise Au NCs, which could contribute to a better design of functional Au NCs, further paving their way towards practical applications in various fields.     

A Nonenzymatic Hydrogen Peroxide Sensor Based on Silver Nanowires and Chitosan Film

A nonenzymatic amperometric electrochemical sensor for the detection of hydrogen peroxide (H₂O₂) was fabricated based on highly dense silver nanowires (Ag NWs) and chitosan (CS) film. Ag NWs were synthesized by a poly(vinyl pyrrolidone) (PVP)‐mediated polyol process in the presence of manganese chloride (MnCl₂), and were characterized by scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDS), and X‐ray diffraction (XRD). Under the optimal conditions, the proposed nonenzymatic sensor exhibited good electrocatalytic activity towards the reduction of H₂O₂, and could detect H₂O₂ in the linear range of 0.008–1.35 mM, with a detection limit of 2 µM (S/N=3).     

Gold Doping of Silver Nanoclusters: A 26‐Fold Enhancement in the Luminescence Quantum Yield

A high quantum yield (QY) of photoluminescence (PL) in nanomaterials is necessary for a wide range of applications. Unfortunately, the weak PL and moderate stability of atomically precise silver nanoclusters (NCs) suppress their utility. Herein, we accomplished a ≥26‐fold PL QY enhancement of the Ag₂₉(BDT)₁₂(TPP)₄ cluster (BDT: 1,3‐benzenedithiol; TPP: triphenylphosphine) by doping with a discrete number of Au atoms, producing Ag_29?xAu_x(BDT)₁₂(TPP)₄, x=1–5. The Au‐doped clusters exhibit an enhanced stability and an intense red emission around 660 nm. Single‐crystal XRD, mass spectrometry, optical, and NMR spectroscopy shed light on the PL enhancement mechanism and the probable locations of the Au dopants within the cluster.     

Aurophilic Interactions in the Self‐Assembly of Gold Nanoclusters into Nanoribbons with Enhanced Luminescence

Aurophilic interactions (Au^I???Au^I) are crucial in directing the supramolecular self‐assembly of many gold(I) compounds; however, this intriguing chemistry has been rarely explored for the self‐assembly of nanoscale building blocks. Herein, we report on studies on aurophilic interactions in the structure‐directed self‐assembly of ultrasmall gold nanoparticles or nanoclusters (NCs, <2 nm) using [Au₂₅(SR)₁₈]^? (SR=thiolate ligand) as a model cluster. The self‐assembly of NCs is initiated by surface‐motif reconstruction of [Au₂₅(SR)₁₈]^? from short SR‐[Au^I‐SR]₂ units to long SR‐[Au^I‐SR]_x (x>2) staples accompanied by structure modification of the intrinsic Au₁₃ kernel. Such motif reconstruction increases the content of Au^I species in the protecting shell of Au NCs, providing the structural basis for directed aurophilic interactions, which promote the self‐assembly of Au NCs into well‐defined nanoribbons in solution. More interestingly, the compact structure and effective aurophilic interactions in the nanoribbons significantly enhance the luminescence intensity of Au NCs with an absolute quantum yield of 6.2 % at room temperature.