Synthesis and mesomorphic properties of benzoxazole derivatives with lateral multifluoro substituents

Fluorinated aromatics is generally chosen as mesogenic cores to design novel liquid crystal compounds. Here, a series of benzoxazole derivatives with laterally multifluorinated biphenyl units, 2-(3′,3-difluoro ?4′-alkoxy-1,1′-biphenyl-4-yl)-benzoxazole derivatives (coded as nPF(3)PF(3)Bx), are synthesized and characterized, where methyl and nitro moieties are selected as terminal groups to investigate the effects of different polar substituents on the liquid crystal properties. The compounds nPF(3)PF(3)Bx show enantiotropic mesophases with mesophase ranges of 0–40°C and 0–63°C on heating and cooling for hydrogen-terminated derivatives (nPF(3)PF(3)BH), 43–93°C and 54–123°C for methyl-terminated ones (nPF(3)PF(3)BM), 60–108°C and 74–152°C for nitro terminated ones (nPF(3)PF(3)BN), respectively. They exhibit photoluminescence emission peaks at 390–392 nm and UV–vis absorption bands with maxima at 327–330 nm, respectively. The results reveal that lateral multifluoro substituents lead to a decrease in melting/clearing points, while electron-withdrawing terminal nitro moiety results in increases in both melting point and mesophase range.     

Improved nematic mesophase stability of benzoxazole-liquid crystals via modification of inter-ring twist angle of biphenyl unit

A series of nematic heterocyclic liquid crystals, 2-(2?-fluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-benzoxazole derivatives (coded as nPF(2)PBx) bearing hydrogen (nPF(2)PBH), methyl (nPF(2)PBM) and nitro (nPF(2)PBN) terminal groups, respectively, are developped and investigated. The results show that the nematic mesophase stability is obviously improved via a slightly increase in the inter-ring twist angle between the planes of two phenyl rings in the biphenyl unit, where modification of the twist angle can be achieved by adjusting the position of the lateral monofluorine substituent from the outer to the inter ring of the biphenyl mesogenic core unit. Meanwhile, the inter-ring lateral fluorine substituent results in a decrease in both melting and clearing points but only a nematic mesophase with an acceptably wide mesophase range for nPF(2)PBx, and thus a potential application in liquid crystal display mixtures is expected, especially for the compounds nPF(2)PBM and nPF(2)PBN. The reduced π–π interaction/conjugation caused by the increased twist angle is considered as one of the possible reasons for the formation of a nematic mesophase.     

Polarity and steric effect of di-lateral substitution on the mesophase behaviour of some azo/ester compounds

Eight homologous series of 2-(or 3-)substituted phenyl 4?-(4″-alkoxy (2?-, or 3″-substituted phenylazo) benzoates (In_XY) were prepared in which the suffix ‘X’ refers to the lateral substituent X attached to the terminal benzene ring that carries the alkoxy group, and the suffix ‘Y’ refers to the substituent attached to the other terminal phenyl group. Within each homologous series, the length of the terminal alkoxy group varies from 8 to 16 carbons, while the lateral polar substituents, X and Y, alternatively varies between CH₃ and F. The mesophase behaviour was investigated by differential scanning calorimetry and identified by polarised optical microscopy. The results were discussed in terms of the polarity and steric effects of the two lateral substituents. Comparative correlations were made to investigate the effect of the second lateral substituent on the mesophase behaviour of the previously investigated mono-laterally substituted analogues. UV–vis spectroscopic study revealed that the compounds I8_XY exhibited two absorption bands: low intense bands at 254–263 and a broad band at 364–376 nm. These bands are attributed to the π–π? transition of the phenyl rings and the whole mesogenic portion.     

Synthesis and mesomorphic properties of the nematic mesophase benzoxazole derivatives with big twist angle of difluoro-biphenyl unit

Modifying the position and numbers of lateral fluorine substituent is a common method to design and adjust the mesophase of liquid crystal compounds. Here, a series of 2-(2,2?-difluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-5-substituted benzoxazole with both non-polar (H, CH₃) and polar (NO₂) groups (coded as nPF(2)PF(2)Bx) is synthesised and characterised. All of the compounds show a conspicuous inter-ring twist angle of 38° compared with corresponding reference compounds I and II which are calculated by density functional theory method, and it is interesting to note that the final compounds nPF(2)PF(2)Bx show only nematic mesophase during heating or cooling. Meanwhile, the UV-vis absorption bands and photoluminescence emission peaks both display remarkable blue-shifted. The aforementioned results reveal that lateral difluoro substituents play a key role to stable the nematic mesophase by increasing the dihedral angle of biphenyl.     

Improved mesophase stability of benzoxazole derivatives via dipole moment modification

By modifying the molecular dipole moments with lateral monofluorine substituent, improved mesophase stabilities were obtained for novel benzoxazole derivatives, 2-(4?-alkoxy-3-fluorobiphenyl-4-yl)-benzoxazole liquid crystals (coded as nPPF(3)Bx). The series of nPPF(3)Bx with lateral monofluorine substituent ortho to benzoxazole group have larger calculated dipole moments by about 2 D than the corresponding fluorine-substituted analogs (compounds I) with lateral monofluorine ortho to alkoxy group; it is interesting to note that they show lower melting and clearing points but better mesophase stability with wider mesophase ranges for the molecules with both polar (NO₂, Cl) and nonpolar (CH₃, H) terminal groups. Meanwhile, compounds nPPF(3)Bx show greater red-shifted photoluminescence emissions than compounds I, which suggest that π–π interaction between molecules is reinforced by the enhanced dipole–dipole interaction caused by increased dipole moments. These results suggest that modification of the molecular dipole moment is an effective method to improve the mesophase stability of the classical mesogenic compounds.     

Preparation and properties of laterally multifluorinated benzoxazole-based nematic mesogens

Series of laterally multifluorinated heterocyclic compounds, 2-(2?,3-difluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-benzoxazole derivatives (nPF(2)PF(3)Bx), are prepared and characterised. They mainly display enantiotropic nematic mesophases with wider mesophase ranges of 12–107°C (heating process) and 22–134°C (cooling process) than the corresponding analogues. The enhanced nematic mesophase stability is achieved via slightly increasing inter-ring twist angle with inter-ring lateral fluorine substitute in biphenyl unit, as well as through improving the molecular polarity with multifluorine substitutes. Meanwhile, two inter-ring lateral fluorine atoms lead to a decrease in melting/clearing points and a wide nematic mesophase range, which makes it possible for heterocyclic mesogens nPF(2)PF(3)Bx to use in nematic liquid crystal display mixtures.     

Preparation and characterisation of laterally monofluorinated mesogenic benzimidazole-based compounds

Series of laterally monofluorinated compounds, 2-(4?-alkoxy-3-fluorobiphenyl-4-yl)-1H-benzimidazole derivatives (nPPF(3)Mx) bearing different substituents (H, CH₃, NO₂, coded as nPPF(3)MH, nPPF(3)MM and nPPF(3)MN, respectively) at 5-position, were prepared and their structures were characterised. According to the results from differential scanning calorimetry and polarising optical microscopy, the present compounds nPPF(3)Mx exhibit enantiotropic smectic mesophases, for which the mesophase ranges are 13–67 and 47–111°C on heating and cooling for nPPF(3)MH, 84–112 and 126–154°C for nPPF(3)MM, and 23–102 and 49–117°C for nPPF(3)MN, respectively. Compared to non-fluorinated analogues, monofluorinated nPPF(3)Mx have low melting/clearing points and display enhanced mesophase range both in heating and cooling, which are attributed to the disruption of the side-to-side intermolecular packing caused by the ortho lateral fluoro substituents and the increased dipole–dipole interaction between the polar fluoro-substituted molecules, respectively. It is noted that nPPF(3)MM and nPPF(3)MN show a much wider mesophase range than nPPF(3)MH, which suggest that the substituent at benzimidazole moiety can improve the mesophase stability.     

Self-assembling behavior of binary mixture of hexa-peri-hexabenzocoronene derivatives with different molecular symmetry

The self-assembly and mesophase behavior of a series of mixtures of hexa-peri-hexabenzocoronene (HBC) derivatives carrying alkyl chains of different lengths at different positions and thus of different molecular symmetry (C₁- and D_3h-symmetry) were examined by powder X-ray diffractometry, UV–vis spectrometry, photoluminescence, polarizing optical microscopy, and differential scanning calorimetry. Significant reduction of isotropic phase transition temperature/clearing temperature was observed compare to single component symmetric analogues. The chain length modulates the mesophase behavior existed in the mixture. In particular, with long dodecyl groups, the mixture exhibited excimer/exciplex formation as well as aggregation induced emission phenomena in the non-polar solvent of hexane. Formation dynamics of intermolecular excimer/exciplex was studied by nuclear magnetic resonance and UV–vis spectroscopic method.     

Zn(II)-containing metallo-supramolecular polymers: synthesis,photophysical and electrochemical properties

Abstract

Two novel building blocks M1, M2 with different electronic structures, were synthesized based on 2,2′:6′,2″-terpyridine modified with cyano-p-phenylenevinylene (CN-PV) and carbazole moieties through Knoevenagel condensation and Suzuki coupling, respectively. Directed by transition metal ion Zn²⁺, the metallo-homopolymers P1, P2 and metallo-copolymer P3 were obtained via self-assembly polymerization. The structures of the monomers and metallo-supramolecular polymers were fully characterized by MS, ¹H-NMR and ¹³C-NMR. Meanwhile, the UV–vis absorption, photoluminescence (PL) and electrochemical properties of these compounds were systematically investigated. With respect to that of the monomers, both the UV–vis absorption and PL spectra of the polymers are significantly red-shifted. The resulting metallo-supramolecular polymers show similar double absorption peaks (342, 418?nm for P1, 339, 410?nm for P2, and 332, 412?nm for P3), which is caused by the π–π* transition and intramolecular charge transfer (ICT). Further, all the polymers display red-orange emission in toluene and narrow electrochemical energy gaps of 1.46, 1.65 and 1.48?eV for P1, P2, and P3, respectively.     

Highly near‐infrared photoluminescence from aza‐borondipyrromethene‐based conjugated polymers

Near‐infrared (NIR) emissive conjugated polymers were prepared by palladium‐catalyzed Sonogashira polymerization of diiodobenzene‐functionalized aza‐borondipyrromethene (Aza‐BODIPY) monomers, which were substituted at 3 and 5 or 1 and 7 positions on the Aza‐BODIPY core, with 1,4‐diethynyl‐2,5‐dihexadecyloxybenzene or 3,3′‐didodecyl‐2,2′‐diethynyl‐5,5′‐bithiophene. The structures of the polymers were confirmed by ¹H NMR, ¹³C NMR, ¹¹B NMR, Fourier transform infrared (FT‐IR) spectroscopies, and size exclusion chromatography (SEC). The optical properties were then characterized by UV–vis absorption and photoluminescence (PL) spectroscopies, and theoretical calculation using density‐functional theory (DFT) method. The polymers were fusible and soluble in common organic solvents including tetrahydrofuran (THF), o‐xylene, toluene, CHCl₃, and CH₂Cl₂, etc. The UV–vis absorption and PL spectra of the polymers shifted to long wavelength region in comparison with simple Aza‐BODIPY as the counterpart because of extended π‐conjugation of the polymers. The polymers efficiently emitted NIR light with narrow emission bands at 713～777 nm on excitation at each absorption maximum. Especially, the polymer attached 1,4‐diethynyl‐2,5‐dihexadecyloxybenzene to 3,5‐position on the core revealed intense quantum yields (?_F = 24%) in this NIR region (753 nm). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and nonlinear optical properties of side chain liquid crystalline polymers containing azobenzene push–pull chromophores

Azobenzene monomeric precursors bearing piperazine as donor moiety with different withdrawing groups and derived side chain polymethacrylates have been prepared and characterized. Monomers having terminal cyano or nitro groups, and the corresponding polymers, exhibited smectic A phases. Linear and nonlinear optical properties of every monomer and thin films of the cyano polymer ( pol‐PZ‐CN ) have been also studied. UV‐vis spectroscopy revealed out‐of‐plane orientation in the as prepared films, as confirmed by waveguide refractive index measurements. Moreover, absorption spectra indicated the presence of azo aggregates in these films. The initial molecular arrangement has been modified by applying thermal annealing within the mesophase range and UV‐blue irradiation. Although thermal annealing resulted in a significant amplification of the out‐of‐plane optical anisotropy due to thermotropic self‐organization of side chain azo moieties, irradiation with 440 nm light induced some disruption of aggregates. The nonlinear optical response of Corona poled films has been studied by second harmonic generation measurements, and the influence of the molecular arrangement on the nonlinear d_ij coefficients has been analyzed. The more efficient poling corresponded to preirradiated films. In any case, a noticeable degree of polar order (70% of the initial d₃₃ value) remained for several months after the poling in films kept at RT. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 232–242, 2010     

A novel type of optically active helical liquid crystalline polymers: Synthesis and characterization of poly(p‐phenylene)s containing terphenyl mesogen with different terminal groups

Series of poly(p‐phenylene)s (PPPs) containing terphenyl mesogenic pendants with cyano and methoxy terminal groups by flexible ? COO(CH₂)₆O? bridge [ P(CN) and P(OCH₃) ] are synthesized through Yamamoto polycondensation with Ni‐based complex catalysts. The effects of the structural variation on their properties, especially their mesomorphism, ultraviolet–visible (UV), and photoluminescence behaviors, are studied. All of the polymers are stable, losing little of their weights when heated to ≥340 °C. The polymers show good solubility and can be dissolved in common solvents. P(CN) with cyano terminal group shows enantiotropic SmA_d phase with bilayer packing arrangement, while P(OCH₃) with methoxy terminal group readily forms nematic and SmA_d phase when heated and cooled. Photoexcitation of their solutions induces strong blue light emission. Compared with P(OCH₃) , the light‐emitting bands of polymer P(CN) is slightly redshifted to 428 nm and the emission intensity of P(CN) is much stronger, due to the existence of donor–acceptor pairs. More interestingly, both of the polymers exhibit obvious Cotton effect on the CD spectra, resulting from the predominant screw sense of the backbone. This indicates that the bulky mesogenic pendant orientating around the backbone will force the main chain with helical conformation in the long region due to steric crowdedness. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4723–4735, 2009     

Synthesis and characterisation of benzoxazole-based liquid crystals possessing 3,5-difluorophenyl unit

Series of fluorinated compounds, 2-(3′,5′-difluoro-4′-alkoxybiphenyl-4-yl)-benzoxazole derivatives (nFBx), were prepared and characterised. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. In the case of carbon atoms in the alkoxy chain between 4 and 10, they exhibited enantiotropic mesophases with the mesophase ranges of 12–119°C and 23–152°C on heating and cooling for compounds bearing different substituents (H, CH₃, Cl, and NO₂). With the exception of nitro-substituted compounds, the nFBx series displayed intense photoluminescence emission at 380–385 nm in methylene chloride solution when they were excited at their absorption maxima. Compared to non-fluorinated analogues, fluorinated compounds nFBx (apart from nitro-substituted compounds) exhibited much lower melting points, but comparable or slightly narrower mesophase ranges during both heating and cooling, which were attributed to the disruption of the side-to-side intermolecular packing caused by the two lateral fluoro substituents.     

Electronic Characterization of Vis–NIR Absorbing Noninnocent Ruthenium Oxyquinolate–merocyanine Complexes and their Photoacoustic Emission in Aqueous Micellar Solution†

The electronic and photophysical properties for a series of ruthenium(II) polypyridyl dyes are presented where a π-accepting 5-(vinyl-cyanine)-8-oxyquinolate class of ligand is incorporated to yield an improved vis–NIR absorption. A combination of computational, UV–vis–NIR absorption, phosphorescence emission and cyclic voltammetry studies are used to probe the influence of these ligands on complex electronic and photophysical properties. To assess their potential as vis–NIR photoacoustic contrast agents, select complexes were formulated in a PBS buffer/Tween® 20 solvent system. The p-quinolin-1-ium, 1,3,3-trimethyl-3H-indol-1-ium and 1,1,3-trimethyl-1H-benzo[e]indol-3-ium acceptor groups each impart a strong 680 nm optical absorption and photoacoustic emission on par with the performance exhibited by both the methylene blue and cryptocyanine commercial dyes.     

Fluorine‐substituted azobenzene destabilizes polar form of optically switchable fulgimide unit in copolymer system

Fulgimide and various size and electronic nature of substituents on the terminal position of azobenzene in the pendant homo/copolymethacrylates were synthesized. Differential scanning calorimetry analysis indicates the homopolymer possessing C‐form fulgimide unit exhibited higher T_m than that of E‐form of the homopolymer and revealed C‐form is highly ordered. Thermal stability suggests azobenzene homopolymers with electron donating substituents have high thermal stability than electron withdrawing substituents. Polarized optical microscopy observation disclosed homopolymers viz., NI, CY, FL, ME , and T‐ME exhibited liquid crystalline mesophases between their T_m and T_i. Optical properties of homo/copolymers were investigated by UV–vis and fluorescence spectroscopy. UV–vis spectroscopy displayed C‐form fulgimide absorption in F‐co‐FL around 482 nm which is around 40 nm lesser than C‐form of substituted azobenzene copolymers. Similarly, fluorescence pattern of F‐co‐FL by UV irradiation exhibited emission intensity slowly increased to certain level then decreases with two new emissions at 430 and 480 nm attributed to terminal position of fluorine atom on azobenzene destabilizes polar form (C‐form) fulgimide unit in the copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1565–1578, 2010     

Facile Synthesis Method for the Preparation of Large‐scale Ultra‐small GdPO4:Tb and GdPO4:Tb@LaPO4 Nanowires

A simple and efficient method is presented for the large‐scale synthesis of ultra‐small, wired‐shaped GdPO₄:Tb nanostructured phosphor material with an average diameter of 2–5 nm and typical average length of 100 nm. X‐ray diffraction (X RD), transmission electron microscopy (TEM), energy dispersive X‐ray (EDX) analysis, as well as FTIR, UV–vis, emission, and excitation spectral techniques were employed to examine the crystal phase, purity, morphology, surface chemistry, and optical and photoluminescence properties of the as‐prepared nanoproducts. The TEM image clearly revealed the single‐phase, highly crystalline, narrow‐size‐distributed, ultra‐small, wire‐shaped nanostructures, which was confirmed from the XRD pattern. Optical absorption spectra in the ultraviolet region show high absorbance because of the high solubility and colloidal stability in aqueous solvents. Surface coating of an undoped LaPO₄ shell remarkably enhanced the crystallinity and photoluminescence properties of the nanowires (NWs). Core/shell NWs represent high emission and excitation intensity regardless of the core NWs because of a decrease in multiphoton relaxation pathways. It could be a highly suitable nanomaterial for optical bioprobes, biodetectors, and so on.     

Thermotropic liquid‐crystalline polymers having five‐membered heterocycles as mesogens, 6. Synthesis,thermotropic liquid‐crystalline and photoluminescent properties of novel semi‐rigid polyesters based on a terphenyl analogue of 1,3,4‐thiadiazole

Novel semi‐rigid thermotropic liquid‐crystalline (LC) polyesters containing terphenyl analogue of 1,3,4‐thiadiazole in the main chain were synthesized by melt polycondensation of a dioxydiundecanol derivative of 2,5‐diphenyl‐1,3,4‐thiadiazole with four aromatic diesters, and their structures were confirmed from FTIR, ¹³C NMR spectra and elemental analyses. Differential scanning calorimetry (DSC) measurements and polarizing microscope observations of textures showed that all the polymers form enantiotropic LC (smectic) phases. UV‐vis and photoluminescence (PL) spectra indicated that polyesters without nitro groups display maximum absorbances arising from 1,3,4‐thiadiazole moiety and blue‐emission maxima, the Stokes shifts being 69.5–79 nm in solution and 54–97 nm in the solid state.     

Liquid-crystalline coumarin derivatives: contribution to the tailoring of metal-free sensitizers for solar cells

Coumarins have been used in a wide range of applications, such as dye-sensitised solar cells, laser dyes and optical sensors. In order to further explore the properties of these materials, three new coumarin derivatives were obtained with different terminal arylalkyne linkages to the 6-position of the coumarin core. The synthesised materials were characterised by NMR, absorption and emission spectroscopy, and the liquid crystal properties were investigated through differential scanning calorimetry and polarised optical microscopy. In addition, dye-sensitised solar cells were assembled to evaluate the photoelectrochemical properties of the materials. Only the coumarin with a naphthyl group exhibited stable smectic A and nematic mesophases. All the coumarins were photoemissive in the range 420–461 nm. The adsorption of these dyes on TiO₂ was observed by UV–vis spectroscopy; in addition, by incident photon-to-electron conversion efficiency and I–V curves, photocurrent generation was observed.     

2-D metalloporphyrin coordination network of cobalt-meso-tetra(4-carboxyphenyl)porphyrin

A new metalloporphyrin coordination framework [Co(H₃TCPP)] (H₆TCPP = meso-tetra(4-carboxyphenyl)porphyrin) has been synthesized hydrothermally. Single-crystal X-ray analysis revealed it exhibits a 2-D layered coordination network structure. Hydrogen bonds are observed between carboxyl groups within the 2-D layer as well as from adjacent layers. The UV–Vis diffuse reflectance spectrum indicates the presence of the expected B (410 nm) and Q (540 and 690 nm) absorption bands. The fluorescence spectrum shows four emission bands centered at 648 nm.     

Poly(triphenylamine)s derived from oxidative coupling reaction: Substituent effects on the polymerization,electrochemical, and electro‐optical properties

A series of triphenylamine‐based polymers containing electron‐donating methoxy (? OCH₃) and electron‐withdrawing cyano or nitro (? CN or ? NO₂) substituents in the main chains have been designed and investigated. These conjugated polymers ( P1 – P3 ) could be readily prepared by oxidative coupling polymerization from monomers ( M1 – M3 ) using FeCl₃ as an oxidant. The P2 and P3 exhibited moderate high T_g values (203–205 °C) and thermal stability. These polymers in NMP solution showed UV–vis absorption around 288–404 nm and photoluminescence peaks around 435–492 nm. P1 – P3 showed reversible oxidation redox couples at E_onset = 0.67, 0.99, and 1.00 V in solution of 0.1 M tetrabutylammonium perchlorate (TBAP)/acetonitrile (CH₃CN), respectively. M3 and P3 exhibited reversible reduction redox couples at E_onset = ?1.04 and ?1.03 V. These polymers also revealed electrochromic characteristic changing color at different potential. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 285–294, 2009