Structural and spectroscopic studies of LaPO4:Ce/Tb@LaPO4@SiO2 nanorods: Synthesis and role of surface coating

Highly fluorescent LaPO₄:Ce/Tb@LaPO₄@SiO₂ (core/shell/Si) nanorods(NRs) were fabricated with an average length 100 nm by co-precipitation process at low temperature. X-ray diffraction (XRD), Transmission electron microscopy (TEM), energy dispersive X-ray analysis, Fourier transform infrared, optical absorption and photoluminescence spectral techniques were applied to investigate the crystal structure, phase purity, morphology, surface chemistry and optical properties of the as-prepared samples. XRD results confirmed the formation of highly crystalline with single phase, monoclinic type structure. TEM image illustrates the poly-dispersed, narrow size distributed, irregular size rod-shaped nanostructures, with mean diameters of 20 nm and average lengths up to 140 nm. FTIR spectral analysis confirmed the silica surface modification. The comparative emission spectral study shows highest luminescence intensity of core/shell NRs, due to a reduction in nonradiative transition rate. The emission intensity enhancement proves that growing of an inert LaPO₄ layer on the surface of luminescent core-NRs was an effective way to suppress surface related quenching mechanism. These well crystalline, highly aqueous soluble along with extraordinary colloidal stability core/shell/Si NRs were extremely suitable material in fluorescent bio-labeling applications.     

Designing of luminescent GdPO4:Eu@LaPO4@SiO2 core/shell nanorods: Synthesis,structural and luminescence properties

GdPO₄:Eu³⁺ (core) and GdPO₄:Eu@LaPO₄ (core/shell) nanorods (NRs) were successfully prepared by urea based co-precipitation process at ambient conditions which was followed by coating with amorphous silica shell via the sol-gel chemical route. The role of surface coating on the crystal structure, crystallinity, morphology, solubility, surface chemistry and luminescence properties were well investigated by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, Fourier Transform Infrared (FTIR), UV-Vis, and photoluminescence spectroscopy. XRD pattern revealed highly purified, well-crystalline, single phase-hexagonal-rhabdophane structure of GdPO₄ crystal. The TEM micrographs exhibited highly crystalline and narrow size distributed rod-shaped GdPO₄:Eu³⁺ nanostructures with average width 14–16 nm and typical length 190–220 nm. FTIR spectra revealed characteristic infrared absorption bands of amorphous silica. High absorbance in a visible region of silica modified core/shell/Si NRs in aqueous environment suggests the high solubility along with colloidal stability. The photoluminescence properties were remarkably enhanced after growth of undoped LaPO₄ layers due to the reduction of nonradiative transition rate. The advantages of presented high emission intensity and high solubility of core/shell and core/shell/Si NRs indicated the potential applications in monitoring biological events.     

Surface‐State‐Mediated Charge‐Transfer Dynamics in CdTe/CdSe Core–Shell Quantum Dots

Herein, we report the synthesis of aqueous CdTe/CdSe type‐II core–shell quantum dots (QDs) in which 3‐mercaptopropionic acid is used as the capping agent. The CdTe QDs and CdTe/CdSe core–shell QDs are characterized by X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR‐TEM), steady‐state absorption, and emission spectroscopy. A red shift in the steady‐state absorption and emission bands is observed with increasing CdSe shell thickness over CdTe QDs. The XRD pattern indicates that the peaks are shifted to higher angles after growth of the CdSe shell on the CdTe QDs. HR‐TEM images of both CdTe and CdTe/CdSe QDs indicate that the particles are spherical, with a good shape homogeneity, and that the particle size increases by about 2 nm after shell formation. In the time‐resolved emission studies, we observe that the average emission lifetime (τ_av) increases to 23.5 ns for CdTe/CdSe (for the thickest shell) as compared to CdTe QDs (τ_av=12 ns). The twofold increment in the average emission lifetime indicates an efficient charge separation in type‐II CdTe/CdSe core–shell QDs. Transient absorption studies suggest that both the carrier cooling and the charge‐transfer dynamics are affected by the presence of traps in the CdTe QDs and CdTe/CdSe core–shell QDs. Carrier quenching experiments indicate that hole traps strongly affect the carrier cooling dynamics in CdTe/CdSe core–shell QDs.     

dl‐Aspartic Acid‐Mediated Hydrothermal Synthesis of β‐ZnS Microspheres and Their Optical Properties

ZnS hollow microspheres were synthesized by a dl ‐aspartic acid mediated hydrothermal route. dl ‐aspartic acid plays an important role as crystal growth soft template, which regulates the release of Zn²⁺ ions for the formation of ZnS hollow spheres. The formation of these hollow spheres was mainly attributed to an Ostwald ripening process. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), electron diffraction (ED), UV/Vis spectroscopy (UV), and photoluminescence (PL). The shells of the microspheres were composed of ZnS quantum dots (QDs) with the average size of 2.31 nm. The average microspheres diameter is 0.5–3.5 μm. The shell thickness of the hollow sphere is ≈?300 nm. The optical bandgap energy increased significantly compared to the bulk ZnS material due to the strong quantum confinement effect. Two strong emissions at ≈?425 nm and ≈?472 nm in the photoluminescence (PL) spectrum of ZnS hollow microspheres indicate strong quantum confinement because of the presence of QDs.     

The Origin and Dynamics of Soft X‐Ray‐Excited Optical Luminescence of ZnO

The distinct optical emission from ZnO materials, nanoneedles and microcrystallites synthesized with different sizes and morphologies by a flow deposition technique, is investigated with X‐ray excited optical luminescence (XEOL) and time‐resolved X‐ray excited optical luminescence (TR‐XEOL) from a synchrotron light source at the O K and Zn L_3,2 edges. The innovative use of XEOL, allowing site‐specific chemical information and luminescence information at the same time, is fundamental to provide direct evidence for the different behaviour and the crucial role of bulk and surface defects in the origin of ZnO optical emission, including dynamics. XEOL from highly crystalline ZnO nanoneedles is characterized by a sharp band‐gap emission (～380 nm) and a broad red luminescence (～680 nm) related to surface defects. Luminescence from ZnO microcrystallites is mostly dominated by green emission (～510 nm) associated with defects in the core. TR‐XEOL experiments show considerably faster decay dynamics in nanoneedles compared to microcrystallites for both band‐gap emission and visible luminescence. Herein we make a fundamental step forward correlating for the first time the interplay of size, crystallinity, morphology and excitation energy with luminescence from ZnO materials.     

Indirect Transformation of Coordination‐Polymer Particles into Magnetic Carbon‐Coated Mn3O4 (Mn3O4@C) Nanowires for Supercapacitor Electrodes with Good Cycling Performance

Carbon‐coated Mn₃O₄ nanowires (Mn₃O₄@C NWs) have been synthesized by the reduction of well‐shaped carbon‐coated bixbyite networks and characterized by TEM, X‐ray diffraction, X‐ray photoelectron spectroscopy, and electrochemical experiments. To assess the properties of 1D carbon‐coated nanowires for their use in supercapacitors, cyclic voltammetry and galvanostatic charging–discharging measurements were performed. Mn₃O₄@C NWs could be charged and discharged faster and had higher capacitance than bare Mn₃O₄ nanostructures and other commercial materials. The capacitance of the Mn₃O₄@C NWs was 92 % retained after 3000 cycles at a charging rate of 5 A g^?1. This improvement can be attributed to the carbon shells, which promote fast Faradaic charging and discharging of the interior Mn₃O₄ core and also act as barriers to protect the inner core. These Mn₃O₄@C NWs could be a promising candidate material for high‐capacity, low‐cost, and environmentally friendly electrodes for supercapacitors. In addition, the magnetic properties of the as‐synthesized samples are also reported to investigate the influence of the carbon coating.     

Synthesis and Characterization of Naphthalene‐Based Banana‐Shaped Liquid Crystals for Photoswitching Properties

A series of banana‐shaped monomers containing naphthalene as central units, azobenzene in side arms with terminal alkenes were synthesized and characterized. Polarizing optical microscopy, DSC and X‐ray diffraction measurements reveal that one compound processes a nematic phase while other four compounds exhibit B₆ phase. The absorption spectrum of trans‐azobenzene displays high‐intensity π‐π* transition at 365 and low‐intensity n‐π* transition at 450 nm. These molecules exhibit strong photoisomerisation behaviour in solutions in which trans to cis isomerisation takes 55 seconds whereas reverse process takes about 32 hours. Such a long thermal back relaxation is useful for creation of optical image storage devices.     

Comparative Structural,Optical, and Photoluminescence Studies of YF3:Pr,YF3:Pr@LaF3, and YF3:Pr@LaF3@SiO2 Core–Shell Nanocrystals

Praseodymium (Pr³⁺)‐doped YF₃ (core) and LaF₃ ‐covered YF₃ :Pr (core–shell) nanocrystals (NCs ) were prepared successfully by an ecofriendly, polyol‐based, co‐precipitation process, which were then coated with a silica shell by using a sol–gel‐based Stober method. X‐ray diffraction (XRD), transmission electron microscopy (TEM ), thermal analysis, Fourier transform infrared (FTIR) , UV /vis, energy bandgap, and photoluminescence studies were used to analyze the crystal structure, morphology, and optical properties of the nanomaterial. XRD and TEM results show that the grain size increases after sequential growth of crystalline LaF₃ and the silica shell. The silica surface modification enhances the solubility and colloidal stability of the core–shell‐SiO₂ NCs . The results indicate that the surface coating affects the optical properties because of the alteration in crystalline size of the materials. The emission intensity of silica‐modified NCs was significantly enhanced compared to that of core and core–shell NCs . These results are attributed to the formation of chemical bonds between core–shell and noncrystalline SiO₂ shell via La–O–Si bridges, which activate the “dormant” Pr³⁺ ions on the surfaces of the nanoparticles. The luminescence efficiency of the as‐prepared core, core–shell, and core–shell‐SiO₂ NCs are comparatively analyzed, and the observed differences are justified on the basis of the surface modification surrounding the luminescent seed core NCs .     

Ultra‐Small Plutonium Oxide Nanocrystals: An Innovative Material in Plutonium Science

Apart from its technological importance, plutonium (Pu) is also one of the most intriguing elements because of its non‐conventional physical properties and fascinating chemistry. Those fundamental aspects are particularly interesting when dealing with the challenging study of plutonium‐based nanomaterials. Here we show that ultra‐small (3.2±0.9 nm) and highly crystalline plutonium oxide (PuO₂) nanocrystals (NCs) can be synthesized by the thermal decomposition of plutonyl nitrate ([PuO₂(NO₃)₂] ? 3 H₂O) in a highly coordinating organic medium. This is the first example reporting on the preparation of significant quantities (several tens of milligrams) of PuO₂ NCs, in a controllable and reproducible manner. The structure and magnetic properties of PuO₂ NCs have been characterized by a wide variety of techniques (powder X‐ray diffraction (PXRD), X‐ray absorption fine structure (XAFS), X‐ray absorption near edge structure (XANES), TEM, IR, Raman, UV/Vis spectroscopies, and superconducting quantum interference device (SQUID) magnetometry). The current PuO₂ NCs constitute an innovative material for the study of challenging problems as diverse as the transport behavior of plutonium in the environment or size and shape effects on the physics of transuranium elements.     

Fabrication of Hierarchically Structured MOF‐Co3O4 on Well‐aligned CuO Nanowire with an Enhanced Electrocatalytic Property

Engineering appropriate shape and size of three‐dimensional inorganic nanostructures materials is of one the main critical problems in pursuing high‐performance electrode materials. Herein, we fabricate a metal‐organic framework derived cobalt oxide (Co₃O₄) are grown on copper oxide nanowire (CuO NWs) supported on the surface of 3D copper foam substrate. The highly aligned CuO NWs were prepared by using electrochemical anodization of copper foam in ambient temperature and followed by MOF Co₃O₄ was grown via a simple in situ solution deposition then consequent calcination process. The obtained binder‐free 3D CuO NWs@Co₃O₄ nanostructures were further characterized by using X‐ray diffraction, X‐ray photoelectron spectroscopy, field‐emission scanning electron microscopy, and transmission electron microscopy. Furthermore, electrochemical sensing of glucose was studied by using Cyclic Voltammetry, and chronoamperometry techniques. Interestingly, 3D CuO NWs@Co₃O₄ electrode exhibits excellent performance for the oxidation of glucose compared with individual entities. The proposed sensor shows wide linear ranges from 0.5 μM to 0.1 mM with the sensitivity of 6082 μA/μM and the lowest detection limit (LOD) of 0.23 μM was observed with the signal to noise ratio, (S/N) of 3. The superior catalytic oxidation of glucose mainly is endorsed by the excellent electrical conductivity and synergistic effect of the Co₃O₄ and CuO NWs.     

Solid luminescent CdSe‐thiolated porous phosphate heterostructures. Application in fingermark detection in different surfaces

A fluorescent hybrid material (PPH‐S‐CdSe), which comprises cadmium selenide sulphide nanoparticles assembled onto thiol functionalised porous phosphate heterostructures (PPH‐SH), was synthesised in aqueous media. This material presents a high stability towards photo‐degradation. The obtained nanocomposite was characterised by various techniques such as Fourier transform infrared spectroscopy, energy dispersive X‐ray, transmission electron microscopy (TEM), X‐ray diffraction, X‐ray photoelectron spectroscopy and fluorescence spectroscopy. This fluorescent material showed a red emission at 576 nm combined with other at 473 nm, explained as different CdS_0.42Se_0.58 nanoparticles size, supported by TEM images. It was suitable for latent fingermark analysis in a wide range of surfaces. Because of its sensitivity and low cost, it is an actual alternative to conventional powdering materials. Copyright © 2012 John Wiley & Sons, Ltd.     

An All‐Inorganic Perovskite‐Phase Rubidium Lead Bromide Nanolaser

Rubidium lead halides (RbPbX₃), an important class of all‐inorganic metal halide perovskites, are attracting increasing attention for photovoltaic applications. However, limited by its lower Goldschmidt tolerance factor t≈0.78, all‐inorganic RbPbBr₃ has not been reported. Now, the crystal structure, X‐ray diffraction (XRD) pattern, and band structure of perovskite‐phase RbPbBr₃ has now been investigated. Perovskite‐phase RbPbBr₃ is unstable at room temperature and transforms to photoluminescence (PL)‐inactive non‐perovskite. The structural evolution and mechanism of the perovskite–non‐perovskite phase transition were clarified in RbPbBr₃. Experimentally, perovskite‐phase RbPbBr₃ was realized through a dual‐source chemical vapor deposition and annealing process. These perovskite‐phase microspheres showed strong PL emission at about 464 nm. This new perovskite can serve as a gain medium and microcavity to achieve broadband (475–540 nm) single‐mode lasing with a high Q of about 2100.     

Doped Lead Halide White Phosphors for Very High Efficiency and Ultra‐High Color Rendering

Near‐UV‐pumped white‐light‐emitting diodes with ultra‐high color rendering and decreased blue‐light emission is highly desirable. However, discovering a single‐phase white light emitter with such characteristics remains challenging. Herein, we demonstrate that Mn doping as low as 0.027 % in the hybrid post‐perovskite type (TDMP)PbBr₄ (TDMP=trans‐2,5‐dimethylpiperaziniium) enables to achieve a bright pure white emission replicating the spectrum of the sun's rays. Thus, a white phosphor exhibiting an emission with CIE coordinates (0.330, 0.365), a high photoluminescence quantum yield of 60 % (new record for white light emission of hybrid lead halides), and an ultra‐high color rendering index (CRI=96, R9=91.8), corresponding to the record value for a single phase emitter was obtained. The investigation of the photoluminescence properties revealed how free excitons, self‐trapped excitons, and low amount of Mn dopants are coupled to give rise to such pure white emission.     

Designing Sub‐2 nm Organosilica Nanohybrids for Far‐Field Super‐Resolution Imaging

Stimulated emission depletion (STED) microscopy enables ultrastructural imaging of biological samples with high spatiotemporal resolution. STED nanoprobes based on fluorescent organosilica nanohybrids featuring sub‐2 nm size and near‐unity quantum yield are presented. The spin–orbit coupling (SOC) of heavy‐atom‐rich organic fluorophores is mitigated through a silane‐molecule‐mediated condensation/dehalogenation process, resulting in bright fluorescent organosilica nanohybrids with multiple emitters in one hybrid nanodot. When harnessed as STED nanoprobes, these fluorescent nanohybrids show intense photoluminescence, high biocompatibility, and long‐term photostability. Taking advantage of the low‐power excitation (0.5 μW), prolonged singlet‐state lifetime, and negligible depletion‐induced re‐excitation, these STED nanohybrids present high depletion efficiency (>96 %), extremely low saturation intensity (0.54 mW, ca. 0.188 MW cm^?2), and ultra‐high lateral resolution (ca. λ_em/28).     

CoFe2O4@SiO2‐CPTES‐Guanidine‐Cu(II): A novel and reusable nanocatalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and polyhydroquinolines and oxidation of sulfides

CoFe₂O₄@SiO₂‐CPTES‐Guanidine‐Cu(II) magnetic nanoparticles were synthesized and used as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of polyhydroquinolines and 2,3‐dihydroquinazoline‐4(1H)‐ones and for the oxidation of sulfides. The structure of this nanocatalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and inductively coupled plasma optical emission spectrometry. Simple preparation, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst are some of the advantages of this protocol.     

Biocompatible NaYF4:Yb,Er upconversion nanoparticles: Colloidal stability and optical properties

Currently, highly luminescent colloidal upconversion nanoparticles (UCNPs) have expanded an increasing interest of researchers because of their facilitating lability in the biomedical/clinical field. In this study, NaYF₄:Yb,Er UCNPs are prepared by eco-friendly metal complexation-based thermal decomposition method at a lower temperature in aqueous media. The phase structure, crystallinity, phase purity, morphology, colloidal dispersibility, surface structure, surface charge, and optical and luminescent properties were evaluated carefully by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), energy dispersive x-ray analysis (EDX), Thermogravimetric analysis (TGA), zeta potential, Fourier transform infrared (FTIR), UV/visible and photoluminescent spectroscopic techniques. XRD pattern shows a pure single-phase cubic structure with an average grain size of 30–35 nm. TEM and SEM micrographs exhibited irregularly shaped spherical morphologies, porous surface structures highly aggregated UCNPs with the narrow-size distribution. Positive zeta potential has shown value signifying high absorption in the visible region which indicates particle's good colloidal stability in aqueous media. Under NIR-laser light excitation, the UCNPs emit strong UC emission transitions in the visible region. A broad infrared absorption peak of hydroxyl groups (–OH) in FTIR spectrum and mass loss at a lower temperature in TGA verified the surface functionality of UCNPs, with high colloidal stability, and excellent biocompatibility in aqueous media. In terms of their surface characteristics and high luminescent properties, the NaYF₄:Yb,Er UCNPs could be interestingly applied in tagging of biomolecules, drug delivery, proteins labeling, and therapeutic and thermostats applications.     

Introduction of organic/inorganic Fe3O4@MCM‐41@Zr‐piperazine magnetite nanocatalyst for the promotion of the synthesis of tetrahydro‐4H‐chromene and pyrano[2,3‐d]pyrimidinone derivatives

Fe₃O₄@MCM‐41@Zr‐MNPs modified with piperazine is easily prepared and characterized using Fourier transform infrared spectroscopy (FT‐IR), X‐ray powder diffraction (XRD), N₂ adsorption–desorption, Transmission electron microscopy (TEM), Energy‐dispersive X‐ray (EDX), Vibrating sample magnetometry (VSM) and Thermogravimetric analysis (TGA) techniques. The characterization results showed that Zr highly dispersed in the tetrahedral environment of silica framework and piperazine is successfully attached to the surface of the nanocatalyst in connection with zirconium. The prepared nanosized reagent (10–30 nm), shows excellent catalytic activity in the synthesis of tetrahydro‐4H‐chromene and pyrano[2,3‐d]pyrimidinone derivatives. All reactions are performed under mild and completely heterogeneous reactions conditions in high yields during short reaction times. On the other hand and due to its superparamagnetic nature the catalyst can be easily separated by the application of an external magnetic field and reused for several times.     

Perylene‐Fused,Aggregation‐Free Polycyclic Aromatic Hydrocarbons for Solution‐Processed Distributed Feedback Lasers

Perylene‐fused, aggregation‐free polycyclic aromatic hydrocarbons with partial zigzag periphery ( ZY‐01 , ZY‐02 , and ZY‐03 ) were synthesized. X‐ray crystallographic analysis reveals that there is no intermolecular π–π stacking in any of the three molecules, and as a result, they show moderate‐to‐high photoluminescence quantum yield in both solution and in the solid state. They also display the characteristic absorption and emission spectra of perylene dyes. ZY‐01 and ZY‐02 with a nearly planar π‐conjugated skeleton exhibit amplified spontaneous emission (ASE) when dispersed in polystyrene thin films. Solution‐processed distributed feedback lasers have been fabricated using ZY‐01 and ZY‐02 as active gain materials, both showing narrow emission linewidth (<0.4 nm) at wavelengths around 515 and 570 nm, respectively. In contrast, ZY‐03 did not show ASE and lasing, presumably due to its highly twisted backbone, which facilitates nonradiative internal conversion and intersystem crossing.     

Shape‐Assisted Self‐Organization in Highly Disordered Liquid Crystal Phases

In achiral rod‐like molecules, a nematic phase is the most disordered liquid crystal phase, which only has one‐directional order in the direction of the molecular long axis. A dumbbell‐shaped molecule (compound 3 : R−C₆H₁₀−CH=CH−C₆H₄−CH=CH−C₆H₁₀−R, (R=n C₅H₁₁)), and its liquid crystal phase (X phase) are reported, which exhibit high scattering without thermal fluctuation between two nematic phases under a polarized light optical microscope. The X phase was investigated by X‐ray diffraction, scanning electron microscopy, atomic force microscopy, and molecular dynamics simulation. A layered structure was ascertained for which a molecular self‐organization mechanism was postulated in which the super‐structure is based on lateral intermolecular interlocking. A second nematic phase above the X phase consisted of “rice grain”‐shaped particles.     

Ultra‐Narrow‐Band Blue‐Emitting Oxoberyllates AELi2[Be4O6]:Eu2+ (AE=Sr,Ba) Paving the Way to Efficient RGB pc‐LEDs

Highly efficient phosphor‐converted light‐emitting diodes (pc‐LEDs) are popular in lighting and high‐tech electronics applications. The main goals of present LED research are increasing light quality, preserving color point stability and reducing energy consumption. For those purposes excellent phosphors in all spectral regions are required. Here, we report on ultra‐narrow band blue emitting oxoberyllates AELi₂[Be₄O₆]:Eu²⁺ (AE=Sr,Ba) exhibiting a rigid covalent network isotypic to the nitridoalumosilicate BaLi₂[(Al₂Si₂)N₆]:Eu²⁺. The oxoberyllates’ extremely small Stokes shift and unprecedented ultra‐narrow band blue emission with fwhm ≈25 nm (≈1200 cm^?1) at λ_em=454–456 nm result from its rigid, highly condensed tetrahedra network. AELi₂[Be₄O₆]:Eu²⁺ allows for using short‐wavelength blue LEDs (λ_em<440 nm) for efficient excitation of the ultra‐narrow band blue phosphor, for application in violet pumped white RGB phosphor LEDs with improved color point stability, excellent color rendering, and high energy efficiency.