Preparation and electro‐optical properties of polymer dispersed liquid crystal films with relatively low liquid crystal content

In this paper, polymer dispersed liquid crystals (PDLC) films with LC content as low as 40 wt% were prepared, and the electro‐optical properties were carefully investigated. To accomplish this, different (meth)acrylate copolymerizaiton monomers have been used. The electro‐optical properties and morphologies of the PDLC films were strongly influenced by the chemical structure of copolymerization monomers (hydroxypropyl methacrylate (HPMA), glycidyl methacrylate, hydroxypropyl acrylate) and their feed ratio. Lower driven voltage and higher contrast ratio were achieved when the PDLC films showed a morphology with suitably LC domain size. At high HPMA content, a thin polymer film was formed on the surface of PDLC samples, which is beneficial to decrease the total LC content in PDLC devices. Copyright © 2013 John Wiley & Sons, Ltd.     

Studies on the electro-optical and the light-scattering properties of PDLC films with the size gradient of the LC droplets

Polymer dispersed liquid crystal (PDLC) films with the size gradient of the LC droplets were prepared based on the epoxy/acrylate hybrid polymer matrix. The ultraviolet (UV) intensity gradient was induced by the UV-absorbing dye over the thickness of the samples. Taking advantage of the difference between the epoxy monomers and acrylate monomers in polymerisation rates and the UV intensity gradient, the gradient distribution of the LC droplet size was formed in PDLC films. The effect of the size gradient of the LC droplets on the electro-optical and the light-scattering properties of PDLC films was investigated. The results showed that due to the size gradient distribution of the LC droplets, PDLC films could exhibit the strong light scattering in the UV-visible-near infrared (VIS-NIR) region. Consequently, it provides a potential approach for modulating NIR light transmittance.     

Effects of functionality of thiol monomer on electro-optical properties of polymer-dispersed liquid crystal films

In this paper, polymer-dispersed liquid crystal (PDLC) films which based on the acrylate and the thiol monomers were first prepared by ultraviolet-initiated polymerisation. The electro-optical properties and morphologies of the PDLC films were systematically investigated. The functionality of thiol monomers and their feed ratio showed great influence on the properties of the fabricated PDLC films because of the existence of competition between thiol–acrylate reaction and acrylate monomer polymerisation reaction. This made the polymer network and electro-optical properties of the PDLC films easily tunable by the introduction of the thiol monomers. When added four-functional thiol monomer PETMP with appropriate concentration into the PDLC system, lower driven voltage and higher contrast ratio were achieved.     

The effect of fluorine-substituted acrylate monomers on the electro-optical and morphological properties of polymer dispersed liquid crystals

The effects of fluorinated acrylate monomers on the electro-optical and morphological properties of polymer dispersed liquid crystal (PDLC) films are reported. The partial fluorination of host polymer matrices resulted in improved optical properties and better defined morphologies. An enhancement in contrast ratio was observed for fluorinated systems containing trifluoroethyl acrylate (TFEA) and hexafluoroisopropyl acrylate (HFIPA). Conversely, the incorporation of methyl acrylate (MA), a chemically similar non-fluorinated acrylate, resulted in no appreciable change in contrast ratio and an increase in relaxation time. Scanning electron microscopy morphological studies were conducted to understand further the influence of fluorinated monomers in PDLC systems.     

The effect of fluorine-substituted acrylate monomers on the electro-optical and morphological properties of polymer dispersed liquid crystals

The effects of fluorinated acrylate monomers on the electro-optical and morphological properties of polymer dispersed liquid crystal (PDLC) films are reported. The partial fluorination of host polymer matrices resulted in improved optical properties and better defined morphologies. An enhancement in contrast ratio was observed for fluorinated systems containing trifluoroethyl acrylate (TFEA) and hexafluoroisopropyl acrylate (HFIPA). Conversely, the incorporation of methyl acrylate (MA), a chemically similar non-fluorinated acrylate, resulted in no appreciable change in contrast ratio and an increase in relaxation time. Scanning electron microscopy morphological studies were conducted to understand further the influence of fluorinated monomers in PDLC systems.     

Effects of crosslinking agent/diluents/thiol on morphology of the polymer matrix and electro-optical properties of polymer-dispersed liquid crystal

To study effects of the crosslinking agent/diluents/thiol on morphology of the polymer matrix and the electro-optical properties of polymer-dispersed liquid crystal (PDLC) films, samples were prepared by ultraviolet (UV)-initiated polymerisation. Due to the interaction between thiol–acrylate reaction and acrylate monomers polymerisation, the sample compositions were the foremost determinant to the microstructures which in turn played an essential role on the electro-optical properties of the PDLC films. With the increasing content of the crosslinking agent, the LC droplet size decreased, while the thiol had a contrary effect on the LC droplet size. It was demonstrated that the superior properties of the low-driven voltage (37.2 V), the high contrast ratio (148.2), the short response time (14.9 ms) and the high saturation transmittance (86.6%) could benefit from a novel microstructure which had a dense surface and meshes with microspheres attached. It was of great significance for the optimisation and the potential applications of the PDLC films.     

A study on the polymer structures and electro-optical properties of epoxy-mercaptan-based polymer dispersed liquid crystal films

ABSTRACT

In this paper, polymer dispersed liquid crystal (PDLC) films based on epoxy-mercaptan system were prepared by thermal-initiated polymerization. The effects of the liquid crystal (LC) content, the proportion and the functionality of epoxy monomers on the polymer structures and electro-optical properties of the as-made PDLC films were investigated systematically. It was found that the morphologies of the polymer matrix can be altered from polymer meshes to polymer balls by increasing the LC content as well as the functionality of epoxy monomers. Accordingly, the electro-optical properties could be regulated by the morphologies of polymer networks. Especially, the as-made PDLC films with homogeneous porous structures exhibited the optimal electro-optical properties. Consequently, this work offers a meaningful approach to control the microstructures and optimize the electro-optical properties of PDLC films, which indeed can form a wonderful footstone for the wide application of PDLC.     

Effects of the structures of polymerizable monomers on the electro‐optical properties of UV cured polymer dispersed liquid crystal films

Polymer dispersed liquid crystal (PDLC) films were prepared by photopolymerization of liquid crystal (LC)/polymerizable monomers/photoinitiator composites. The effects of the structures of the polymerizable monomers on the electro‐optical properties of PDLC films were investigated. It was found that the length of the molecular chain and the rigidity and flexibility of molecules influenced the structure of the polymer network in the PDLC films somewhat, and then affected the electro‐optical properties of the composites accordingly. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1369–1375, 2008     

The fabrication of novel optical diffusers based on UV-cured polymer dispersed liquid crystals

Polymer dispersed liquid crystals (PDLCs) with different sizes of the LC droplets are prepared based on the ultraviolet (UV) light curable acrylate monomers/LCs composites to fabricate the optical diffuser films. To acquire light diffusers with high optical performance, the effects of the monomer structure and the UV light intensity on the micro-structure of the PDLC films are studied. Results show that the PDLC films could exhibit a strong light scattering at the premise of maintaining high transmittance in the visible region. As the LC droplets are spherically dispersed in the polymer networks, when the size of LC droplets is about 3.0 μm, the haze can reach 88.5% and the transmittance is nearly 90.0%, which can be used as a bottom diffuser film. While when the size of LC droplets is about 10.0 μm, the haze and transmittance are 39.2% and 90.2%, respectively; hence, it can be a good choice for a top diffuser film. With the advantages of simple preparation, roll-to-roll industrial production and tunable optical properties, it is supported that the films based on UV-cured PDLC films can be applied as outstanding optical diffuser films in the liquid crystal display industry.     

Effects of the structures of epoxy monomers on the electro-optical properties of heat-cured polymer-dispersed liquid crystal films

Polymer-dispersed liquid crystal (PDLC) films were prepared from thermal polymerisation-induced phase separation in heat-curable monomers/nematic liquid crystal (LC) mixtures. For PDLCs with a certain amount of LCs, the microstructure and the refractive index of polymer networks could be influenced by the relative content of epoxy monomers, owing to their different chemical structures. The effect of these factors on the electro-optic properties of films was also investigated.     

The effect of molecular weight of polymer matrix on properties of polymer-dispersed liquid crystals

The electro-optical properties and memory effects are important characters of polymer-dispersed liquid crystal (PDLC) devices. Molecular weight of polymer matrix influences the morphology of liquid crystal droplets in PDLC film and the performance of PDLC devices. In this letter, PDLC films were doped with a small amount of chain transfer agent (CTA), in order to control the molecular weight of polymer matrix. It is observed that the addition of CTA induces a reduction of threshold voltage. In addition, the effect of molecular weight on memory effects of PDLC devices was also discussed. It is found that the entanglement between polymer and liquid crystal molecule increased with the molecular weight, which reduces the memory effect.     

Influence of chain length of prepolymers in permanent memory effect of PDLC assessed by solid-state NMR

ABSTRACT

The relationship between linear chain (ethylene oxide units) length of polymerisable monomers with morphology, electro-optical properties and ¹³C nuclear magnetic resonance (NMR) spectroscopy of the corresponding polymer-dispersed liquid crystal (PDLC) films was investigated. The preferred liquid crystal molecule alignment and permanent memory effect of PDLC were greatly influenced by the length of the molecular chain of prepolymers to be incorporated as a polymer matrix. By increasing the number of ethylene oxide in prepolymer chain and maintaining the number of functionalities (polymerisable groups in each monomer molecule), the permanent memory effect of PDLC increased, as proved by solid-state ¹³C NMR spectroscopy.     

Effects of alkyl chain length of monomer and dye-doped type on the electro-optical properties of polymer-dispersed liquid crystal films prepared by nucleophile-initiated thiol-ene click reaction

ABSTRACT

Polymer-dispersed liquid crystal (PDLC) films containing a series of monomers with different alkyl chain lengths were prepared by nucleophile-initiated thiol-ene click reaction. The effect of alkyl chain length of monomers, dye and temperature on electro-optical properties of PDLC films was investigated. It was found that the alkyl chain length and polymerisation rate of monomers together determine the size of liquid crystal (LC) droplets, thus affecting the electro-optical properties of PDLC. In addition, the type and content of dyes could be optimised to obtain PDLC materials with better comprehensive properties for display.     

An electrically light-transmittance-switchable film with a low driving voltage based on liquid crystal/polymer composites

ABSTRACT

As a typical class of electrically light-transmittance-switchable (ELTS) composites materials, polymer dispersed liquid crystal (PDLC) films have been widely used in displays, smart windows, light shutters, etc. However, the commercialised PDLC film still requires a comparatively high voltage to maintain its transparent state, leading to huge power consumption and even a potential safety risk. In this regard, we proposed a ‘heat followed UV’ stepwise polymerisation strategy for preparing a kind of ELTS film with a low driving voltage (~20.7 V) through constructing a coexistent system of polymer dispersed and polymer stabilised liquid crystal (PD&SLC). In this new PD&SLC system, vertically orientated polymer networks were formed within LC domains to induce the vertical alignment of LC, thereby reducing the driving voltage. Also, the as-made PD&SLC film exhibited good flexibility due to the high content of polymer. Moreover, the effects of the liquid crystalline polymerisable monomers content on the polymer morphologies as well as the electro-optical properties of the as-made PD&SLC films were elaborately investigated.     

Effects of the fluorinated liquid crystal molecules on the electro-optical properties of polymer dispersed liquid crystal films

The different fluorinated liquid crystal (LC) molecules doped to E8 were used as LC component to prepare polymer dispersed liquid crystal (PDLC) films. The mass fraction of the LC mixture is fixed 50.0 wt%. Results indicate that doping 8.0 wt% fluorinated LC molecule ME3CP to E8 significantly reduced the driving voltage of the PDLC films, and the driving voltage reduced with the rise of mass fraction of ME3CP. Besides, the terminal flexible chain length of the fluorinated LC molecule influenced the LC mixture properties based on E8, such as the dielectric anisotropy, birefringence and viscosity of the LC mixture, and the morphology and the electro-optical properties of PDLC films were controlled not only by the physical properties of the LC mixture, but also by the terminal flexible chain length of the fluorinated LC molecule .     

Effects of hyperbranched prepolymers prepared from butyl acrylate and butyl methacrylate on the electro‐optical properties of polymer dispersed liquid crystal

Two hyperbranched prepolymers were synthesized via the reversible addition‐fragmentation chain transfer copolymerization of butyl acrylate or butyl methacrylate with divinyl benzene, respectively. These prepolymers were used in the photopolymerization‐induced phase separation process of preparing polymer dispersed liquid crystal (PDLC) films with no risk of gelation. The morphologies of PDLC samples were investigated. Of particular interest was that the driving voltage (V₉₀) of PDLC with high glass transition temperature (T_g) matrix was as low as 5 V, whereas the V₉₀ of PDLC with low T_g matrix was still high. An explanation for this phenomenon is the hypothesis that different interaction modes function at the interface of liquid crystal and polymer. Meanwhile, the hysteresis of the two systems was minor, which correlated with the hyperbranched structure of polymer. The on‐state transmittance (T_ON) of PDLC films enhanced because of the well matching between the refractive index of polymer and that of liquid crystal. Copyright © 2011 John Wiley & Sons, Ltd.     

Control of the microstructure of polymer network and effects of the microstructures on light scattering properties of UV‐cured polymer‐dispersed liquid crystal films

Polymer‐dispersed liquid crystals (PDLC) films were prepared from ultraviolet (UV) irradiation‐induced polymerization of the photopolymerizable monomers in photopolymerizable monomers/nematic liquid crystal (LC) mixtures. The effects of the composition of the mixtures, the curing temperature, and the UV light intensity on the microstructure of the polymer network in the PDLC films were investigated. Furthermore, the effects of the microstructures on the light scattering properties of the PDLC films in the wavelength region of 300–2500 nm were studied experimentally and theoretically based on the combination of three kinds of classical light scattering theories: the Rayleigh‐Gans (RG) approach, the anomalous diffraction (AD) approach, and the geometrical optics (GO) approach. It was found that the sizes of LC domain in PDLC films increased with the increase of the LC content as well as the decrease of the UV curing intensity, while increased at first and then decreased with the increase of the curing temperature. Moreover, smaller LC domain sizes could exhibit strong scattering properties in a smaller VIS wavelength region and the transmittance in NIR region (especially in the wavelength range of 1300–2500 nm) obviously decreased with the increasing sizes of LC domain. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2090–2099, 2008     

Propriétés optiques et thermophysiques de composites polyméres-cristaux liquides (PDLC)

Polymer dispersed liquid crystal (PDLC) films can be switched electrically from a light scattering off-state to a highly transparent on-state. Thin films were prepared via a polymerization-induced phase separation process using electron beam radiation. The liquid crystal (LC)/polymer materials were obtained from blends of a eutectic nematic mixture E7 and a polyester acrylate based polymer precursor. The optical and electrooptical properties of the obtained PDLC films strongly depend on the LC concentration. The LC solubility limit in the polymer matrix and the fractional amount of LC contained in the droplets were determined by calorimetric measurements.     

Comparative studies of polymer‐dispersed liquid crystal films via a thiol‐ene click reaction

In this work, the thiol‐ene click reaction is employed to fabricate polymer‐dispersed liquid crystal (PDLC) films by photoinitiated polymerization. The PDLC films are prepared by systematic variation of key conditions: variety and content of ‐ene monomer, liquid crystal (LC) content, curing time, and curing light intensity. We find that both the morphologies and electro‐optic properties of these films are adjustable. When increasing the length of alkyl main chain of ‐ene monomers, the driving voltages reduce, but in turn, the contrast ratio decreases. Increasing ‐ene monomer content raises the driving voltages as well as the response time, and the increase of LC content lowers the driving voltages but has a negative effect on the contrast ratio. The changes to the curing conditions (both curing time and UV light intensity) can be used to modify the driving voltages, response time, and contrast ratios of PDLC films. These comparative studies will elucidate new insights in commercial applications of intelligent PDLC films.     

Effects of thiol monomers on the electro-optical properties of polymer-dispersed liquid crystal films prepared by nucleophile-initiated thiol-ene click reaction

ABSTRACT

Nucleophile-initiated thiol-ene click reaction is a highly novel and efficient method of preparing polymer-dispersed liquid crystal (PDLC) films. The effects of thiol monomers on the electro-optical properties of PDLC films prepared by nucleophile-initiated thiol-ene click reaction were investigated in this work. The thiol monomers were dithiol, trithiol, tetrathiol or their mixture. It was found that the increase of functionality could lead to the increase of threshold voltage and saturation voltage and the decrease of off-state transmittance. The influence of reaction temperature was also investigated. The results indicated that functionality and reaction temperature had combined effects on the electro-optical properties of PDLC films.