Stable frustrated phases in chiral liquid crystals derived from optically active (R)- and (S)-3-ethylmercapto-2-methylpropionic acids

Highly optically pure (R)- and (S)-3-ethylmercapto-2-methylpropionic acids were synthesized by using optically active (D)- and (L)-2,10-camphorsultams as chiral auxiliaries, respectively. Their derivatives, (R)- and (S)-EMMPNmB (m=6-12), were prepared for investigation. Microscopic texture observations demonstrated that the materials possess three stable frustrated phases: BP, TGB_A* and TGB_C* phases. Interestingly, it was found that the N* phase behaves as an intermediary phase between BP and TGB_A* phases in a rather narrow temperature range (calc. 0.5-1.4°C). A study of the racemic mixture, (±)-EMMPNmB (m=10), indicated that the chirality of the molecule could suppress the formation of smectic phases in the heating process. An increase of alkyl chain length favoured the formation of the TGB phases particularly, in accompaniment with a change of TGB phases from monotropic to enantiotropic. Moderate maximum P _S values (calc. 14-19 nC cm^-2) and apparent tilt angle (calc. 20°) were obtained for the TGB_C* phase in a surface stabilized ferroelectric liquid crystal geometry.     

Crystal structure,thermodynamic properties and detonation characterization of bis(5‐amino‐1,2,4‐triazol‐3‐yl)methane

Bis(5‐amino‐1,2,4‐triazol‐3‐yl)methane (BATZM, C₅H₈N₈) was synthesized and its crystal structure characterized by single‐crystal X‐ray diffraction; it belongs to the space group Fdd2 (orthorhombic) with Z = 8. The structure of BATZM can be described as a V‐shaped molecule with reasonable chemical geometry and no disorder. The specific molar heat capacity (C_p,m) of BATZM was determined using the continuous C_p mode of a microcalorimeter and theoretical calculations, and the C_p,m value is 211.19 J K^?1 mol^?1 at 298.15 K. The relative deviations between the theoretical and experimental values of C_p,m, H_T – H_298.15K and S_T – S_298.15K of BATZM are almost equivalent at each temperature. The detonation velocity (D) and detonation pressure (P) of BATZM were estimated using the nitrogen equivalent equation according to the experimental density; BATZM has a higher detonation velocity (7954.87 ± 3.29 m s^?1) and detonation pressure (25.72 ± 0.03 GPa) than TNT.     

Adsorption and thermodynamic properties of dissymmetric gemini imidazolium surfactants with different spacer length

A series of dissymmetric gemini imidazolium surfactants with different spacer length ([C_mC_sC_nim]Br₂, m + n = 24, m = 12, 14, 16, 18; s = 2, 4, 6) were synthesized and characterized by ¹H NMR and ESI-MS spectroscopy. Their adsorption and thermodynamic properties were investigated by the surface tension and electrical conductivity methods. Consequently, the surface activity parameters (cmc, γ_cmc, π_cmc, pC₂₀, cmc/C₂₀, Γ_max, A_min) and thermodynamic parameters (ΔG_m^θ, ΔH_m^θ, ΔS_m^θ) were obtained. The effects of the dissymmetry (m/n) and the spacer length (s) on the surface activity and micellization process of surfactants have been discussed in detail.     

Low-temperature thermodynamic properties of L- and DL-valines

Heat capacities C _p(T) of L-valine and DL-valine were measured in the temperature range 6–300 K with an adiabatic calorimeter; thermodynamic functions were calculated based on these measurements. At 298.15 K, the values of heat capacity, C _p; entropy, S _m ⁰ (T) ? S _m ⁰ (0); enthalpy, H _m ⁰ (T) ? H _m ⁰ (0) of L-valine are equal, respectively, to 167.9 ± 0.3 J K^?1 mol^?1; 178.5 ± 0.4 J K^?1 mol^?1; and 27510 ± 60 J mol^?1. For DL-valine, these values are equal, respectively, to 167.3 ± 0.3 J K^?1 mol^?1, 174.4 ± 0.3 J K^?1 mol^?1, and 27000 ± 50 J mol^?1. The difference between the heat capacities of enantiomer and racemate has been calculated and compared with the similar data for serines, cysteines, and phenylglycines.     

Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

Equations of state for polyamide‐6 and its nanocomposites. II. Effects of clay

The pressure‐volume‐temperature (PVT) dependencies of polyamide‐6 and its nanocomposites (polymeric nanocomposites) were measured at temperatures T = 300–600 K and pressures P = 0.1–190 MPa, thus spanning the range of molten and “solid” phases. The Simha‐Somcynsky (S‐S) cell‐hole equation of state (EOS) was used for describing the molten region. At T_g(P) ≤ T ≤ T_m(P), the “solid” phase is a mixture of the liquid polyamide‐6 with dispersion of crystals. Accordingly, the PVT behavior in this region was described as a combination of the S‐S EOS for the liquid phase and the Midha‐Nanda‐Simha‐Jain (MNSJ) EOS for the crystalline one. These two theories based on different models yielded two sets of the characteristic reducing parameters, P^*, T^*, V^* and the segmental molecular weight, M_s. Incorporation of 2 and 5 wt % clay increased P^* and reduced T^* and V^*, but the effects were small. Fitting the combination of S‐S and MNSJ EOS' to isobaric “solid” phase data yielded the total crystallinity, X_cryst, and the correcting excess specific volume, ΔV_m,c. Both parameters were sensitive to pressure, P, and the clay content, w—the former increased with P and w, whereas the latter decreased. The raw PVT data were numerically differentiated to obtain the thermal expansion and compressibility coefficients, α and κ, respectively. At T < T_m, addition of clay reduced their relative magnitude, whereas at T > T_m, the opposite effect was observed, most likely owing to the excess of intercalant in the polymeric nanocomposites samples. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 966–980, 2009     

Electro-optical investigations and effect of asymmetry in bent-core liquid crystals

We report the synthesis and mesomorphic properties of a homologous series (10a–10g) of bent-core molecules constructed through covalent linkage of structurally non-symmetrical rod-like mesogens connected with a 1, 3-phenylene unit. The study of homologous series underlines the importance of length and nature of terminal chains. The homologues of shorter chains show a typical non-switchable rectangular columnar B₁ phase, while the switchable lamellar (B₂) phase is induced on moving to higher homologues. X-ray diffraction patterns indicate the presence of B₁ and B₂ mesophases. Polarised optical microscopy investigations under electric field in the B₂ phases revealed the existence of anticlinic antiferroelectric texture. The measured spontaneous polarisation value in one of the compounds is 936 nC cm^?2, a high polarisation value in bent-core liquid crystals.     

High-Pressure Solubility of l-Methionine in Water

The solubility (m _S) of l-methionine in water was measured at 298.2 K and pressures up to 200 MPa. The data were fitted to the equation ln(m _S/mol·kg^?1) = ?4.62 × 10^?6 (p/MPa)² + 2.65 × 10^?3 (p/MPa) ? 0.970 with a standard deviation of σ(ln m _S) = 0.002. The pressure coefficient of the logarithm of solubility (?ln m _S/?p) _T was thermodynamically estimated to be (2.62 ± 0.34) × 10^?3 MPa^?1 at 0.10 MPa using several parameters such as partial molar volume and activity coefficient of l-methionine in water and molar volume of solid l-methionine. The resulting value agrees well with the second term on the right-hand side of the fitted equation above, indicating the reliability of the high-pressure solubility measurements. The value of (?ln m _S/?p) _T also was compared with those of other amino acids.     

1‐(β‐d‐Erythrofuranosyl)adenosine

The title compound, also known as β‐erythroadenosine, C₉H₁₁N₅O₃, (I), a derivative of β‐adenosine, (II), that lacks the C5′ exocyclic hydroxymethyl (–CH₂OH) substituent, crystallizes from hot ethanol with two independent molecules having different conformations, denoted (IA) and (IB). In (IA), the furanose conformation is ^OT₁–E₁ (C1′‐exo, east), with pseudorotational parameters P and τ_m of 114.4 and 42°, respectively. In contrast, the P and τ_m values are 170.1 and 46°, respectively, in (IB), consistent with a ²E–²T₃ (C2′‐endo, south) conformation. The N‐glycoside conformation is syn (+sc) in (IA) and anti (−ac) in (IB). The crystal structure, determined to a resolution of 2.0 Å, of a cocrystal of (I) bound to the enzyme 5′‐fluorodeoxyadenosine synthase from Streptomyces cattleya shows the furanose ring in a near‐ideal ^OE (east) conformation (P = 90° and τ_m = 42°) and the base in an anti (−ac) conformation.     

Low-temperature thermodynamic properties of <Emphasis Type="Italic">L</Emphasis>-cysteine

Heat capacity C _p(T) of the orthorhombic polymorph of L-cysteine was measured in the temperature range 6–300 K by adiabatic calorimetry; thermodynamic functions were calculated based on these measurements. At 298.15 K the values of heat capacity, C _p; entropy, S _m⁰(T)-S _m⁰(0); difference in the enthalpy, H _m⁰(T)-H _m⁰(0), are equal, respectively, to 144.6±0.3 J K⁻¹ mol⁻¹, 169.0±0.4 J K⁻¹ mol⁻¹ and 24960±50 J mol⁻¹. An anomaly of heat capacity near 70 K was registered as a small, 3–5% height, diffuse ‘jump’ accompanied by the substantial increase in the thermal relaxation time. The shape of the anomaly is sensitive to thermal pre-history of the sample.     

Crystal structure,thermal properties and detonation characterization of bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride

Bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride (BATZM·Cl₂ or C₅H₁₀N₈²⁺·2Cl^?) was synthesized and crystallized, and the crystal structure was characterized by single‐crystal X‐ray diffraction; it belongs to the space group C2/c (monoclinic) with Z = 4. The structure of BATZM·Cl₂ can be described as a V‐shaped molecule with reasonable chemical geometry and no disorder, and its one‐dimensional structure can be described as a rhombic helix. The specific molar heat capacity (C_p,m) of BATZM·Cl₂ was determined using the continuous C_p mode of a microcalorimeter and theoretical calculations, and the C_p,m value is 276.18 J K^?1 mol^?1 at 298.15 K. The relative deviations between the theoretical and experimental values of C_p,m, H_T – H_298.15K and S_T – S_298.15K of BATZM·Cl₂ are almost equivalent at each temperature. The detonation velocity (D) and detonation pressure (P) of BATZM·Cl₂ were estimated using the nitrogen equivalent equation according to the experimental density; BATZM·Cl₂ has a higher detonation velocity (7143.60 ± 3.66 m s^?1) and detonation pressure (21.49 ± 0.03 GPa) than TNT. The above results for BATZM·Cl₂ are compared with those of bis(5‐amino‐1,2,4‐triazol‐3‐yl)methane (BATZM) and the effect of salt formation on them is discussed.     

Influence of meta-extended rigid-core,complementary hydrogen bonding and flexible chain on polymorphism in Schiff-base liquid crystals: (4)MeOBD(3)AmBA:nOBAs

ABSTRACT

Schiff-base complementary hydrogen-bonded liquid crystals (HBLC), viz., (4)_MeOBD(3)_AmBA:nOBAs with flexible chain length for n = 3,4,5,6,7,8,9,10,11 and 12 are reported. ¹H; ¹³C-NMR and Infra-Red spectroscopy used to confirm the formation of HBLCs. LC phases and transition temperatures (T_c) determined by polarised optical microscopy (POM) and differential scanning calorimetry (DSC). T_c and enthalpy (?H) determined by DSC also. Odd-Even effect observed at clearing and melting transitions. Influence of Schiff base and Oxygen as bridging atom promote smectic phase abundance. HBLCs exhibit tetra- or penta-phase variance. Maximum (penta) phase variance is exhibited by n = 8 and 12 with long flexible chain. Prevalent abundance of quasi-two-dimensional (2D) LC phases of SmF and SmI is observed. Nematic phase is quenched. Lower (n = 4) and intermediate (n = 6) members exhibited SmB_cryst phase. Predominant occurrence of enantiotropic LC phases is noticed. All members exhibited 3D tilted SmG phase. A-C transition exhibited by intermediate homologues (for n = 7, 8, 9 and 10) is found to be either second order or with very small enthalpy. Phase diagram reveals the abundance of multi-critical points with LC phasesinvolving exotic symmetries. Influence of meta-extended rigid core, complementary HB and flexibility is studied for the LC phase abundance with characteristic structural order. POM and DSC results are discussed in the wake of reports in other achiral calamitic LCs.     

Penicillamine and captopril: mechanistic exploration of defensive actions of thiol drugs against a metal bound-superoxo complex

In acid-media ([H⁺] = 0.01–0.06 M), each of the thiol compounds, D-penicillamine (PEN, L_PH₂) and captopril (CAP, L_CH₂) exist in several proton-dependent forms which can reduce the superoxo complex [(en)(dien)Co^III(O₂)Co^III(en)(dien)]⁵⁺ (1) to the corresponding peroxo [(en)(dien)Co^III(O₂)Co^III(en)(dien)]⁴⁺ (2) or the hydroperoxo complex [(en)(dien)Co^III(OOH)Co^III(en)(dien)]⁵⁺ (3). The observed first-order rate constants, k_o,P and k_o,C for PEN and CAP increase with the increase in [T_PEN] and [T_CAP] (which are the analytical concentrations of the respective thiols) but decrease with the increase in the media-acidity ([H⁺]) and the media ionic strength (I). The protolytic equilibria in aqueous solution allow several potentially reducing forms to coexist for both PEN (L_PH₃⁺, L_PH₂, L_PH^?, and L_P^2?) and CAP (L_CH₂, L_CH^?, L_C^2?) but the kinetic analyses reveal that the order of reactivity for the species are L_PH₃⁺ ~ L_PH₂ <<< L_PH^? and L_CH₂ < L_CH^? <<< L_C^2?, respectively. The predominance and higher reactivities of the anionic species, L_PH^? and L_C^2? are supported by the negative slopes of the plots of k_o,P or k_o,C versus I. Moreover, a large value of k_H/k_D for PEN suggests an inner-sphere electroprotic reaction pathway while the absence of such effect for CAP strongly supports an outer-sphere electron transfer reaction. These propositions are supported by the structural features of L_PH^? and L_C^2?.     

Low-temperature heat capacities and standard molar enthalpy of formation of aspirin

Molar heat capacities (C _p,m) of aspirin were precisely measured with a small sample precision automated adiabatic calorimeter over the temperature range from 78 to 383 K. No phase transition was observed in this temperature region. The polynomial function of C _p,m vs. T was established in the light of the low-temperature heat capacity measurements and least square fitting method. The corresponding function is as follows: for 78 K≤T≤383 K, C _p,m/J mol^-1 K^-1=19.086X ⁴+15.951X ³-5.2548X ²+90.192X+176.65, [X=(T-230.50/152.5)]. The thermodynamic functions on the base of the reference temperature of 298.15 K, {ΔH _T -ΔH _298.15} and {S _T-S _298.15}, were derived. Combustion energy of aspirin (Δ_c U _m) was determined by static bomb combustion calorimeter. Enthalpy of combustion (Δ_c H ^o _m) and enthalpy of formation (Δ_f H ^o _m) were derived through Δ_c U _m as - (3945.26±2.63) kJ mol^-1 and - (736.41±1.30) kJ mol^-1, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermodynamic investigation of several natural polyols

The low-temperature heat capacity C _p,m of erythritol (C₄H₁₀O₄, CAS 149-32-6) was precisely measured in the temperature range from 80 to 410 K by means of a small sample automated adiabatic calorimeter. A solid-liquid phase transition was found at T=390.254 K from the experimental C _p-T curve. The molar enthalpy and entropy of this transition were determined to be 37.92±0.19 kJ mol⁻¹ and 97.17±0.49 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions [H _T-H _298.15] and [S _T-S _298.15], were derived from the heat capacity data in the temperature range of 80 to 410 K with an interval of 5 K. The standard molar enthalpy of combustion and the standard molar enthalpy of formation of the compound have been determined: Δ_c H _m⁰(C₄H₁₀O₄, cr)= −2102.90±1.56 kJ mol⁻¹ and Δ_f H _m⁰(C₄H₁₀O₄, cr)= − 900.29±0.84 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. DSC and TG measurements were performed to study the thermostability of the compound. The results were in agreement with those obtained from heat capacity measurements.     

1-(2′-Deoxy-β-D-xylofuranosyl)cytosine: Base pairing of oligonucleotides with a configurationally altered sugar-phosphate backbone

Solid-phase synthesis of the oligo(2′-deoxynucleotides) 19 and 20 containing 2′-deoxy-β-D -xylocytidine ( 4 ) is described. For this purpose, 1-(2-deoxy-β-D -threo-pentofuranosyl)cytosine ( = 1-(2-deoxy-β-D -xylofuranosyl)-cytosine; 4 ) was protected at its 4-NH₂ group with a benzoyl (→ 5 ) or an isobutyryl (→ 8 ) residue, and a dimethoxytrityl group was introduced at 5′-OH (→ 7, 10 ; Scheme 2). Compounds 7 and 10 were converted into the 3′-phosphonates 11a,b . While 19 could be hybridized with 21 and 22 under formation of duplexes with a two-nucleotide overhang on both termini ( 19 · 21 : T_m 29°; 19 · 22 : T_m 22°), the decamer 20 bearing four xC_d residues could no longer be hybridized with one of the opposite strands. Moreover, the oligonucleotides d[(xC)₈? C] ( 13 ), d[(xC)₄? C] ( 14 ), d[C? (xC)₄? C] ( 15 ), and d[C? (xC)₃? C] ( 16 ) were synthesized. While 13 exhibits an almost inverted CD spectrum compared to d(C₉) ( 17 ), the other oligonucleotides show CD spectra typical for regular right-handed single helices. At pH 5, d[(xC)₈? C] forms a stable hemi-protonated duplex which exhibits a T_m of 60° (d[(CH⁺)₉] · d(C₉): T_m 36°). The thermodynamic parameters of duplex formation of ( 13H ⁺ · 13 ) and ( 17H ⁺ · 17 ) were calculated from their melting profiles and were found to be identical in ΔH but differ in ΔS ( 13H ⁺ · 13 : ΔS = ?287 cal/K mol; 17H ⁺ · 17 : ΔS = ?172 cal/K mol).     

Layer structures. VI. Chiral sanidic polyesters derived from 2,5-bis (dodecyloxy) terephthalic acids and 4,4′-dihydroxybiphenyl

Copolycondensations of (S,S)-2,5-bis(2-methylbutyloxy) terephthaloylchloride with 2,5-bis(dodecyloxy)terephthaloylchloride and with 4,4′-bistrimethylsiloxybiphenyl yielded a series of novel chiral thermotropic copolyesters. These polyesters were characterized by elemental analyses, inherent viscosities, ¹H-NMR spectroscopy, optical rotations, optical microscopy, DSC measurements, and WAXS powder patterns recorded with synchrotron radiation under variation of the temperature. All homo- and copolyesters formed a solid sanidic layer structure with melting temperatures (T_m) ≥ 200°C. A broad enantiotropic nematic or cholesteric phase is formed above T_m with isotropization temperatures (T_is) in the range of 275–325°C. Yet, the T_m of the chiral homopolyester is so high (378°C) that the melting process is immediately followed by rapid degradation. The cholesteric phases of the copolyesters displayed unusual mobile schlieren textures, but a stable Grandjean texture was never obtained. Cholesteric domains consisting of loose bundles of more or less helical main chains are discussed as supramolecular order responsible for the observed textures and their pronounced temperature dependence. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 947–957, 1997     

Molar heat capacity and thermodynamic properties of 1,2-cyclohexane dicarboxylic anhydride [C8H10O3]

The molar heat capacity C _p,m of 1,2-cyclohexane dicarboxylic anhydride was measured in the temperature range from T=80 to 390 K with a small sample automated adiabatic calorimeter. The melting point T _m, the molar enthalpy Δ_fus H _m and the entropy Δ_fus S _m of fusion for the compound were determined to be 303.80 K, 14.71 kJ mol⁻¹ and 48.43 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions [H _T-H _273.15] and [S _T-S _273.15] were derived in the temperature range from T=80 to 385 K with temperature interval of 5 K. The thermal stability of the compound was investigated by differential scanning calorimeter (DSC) and thermogravimetry (TG), when the process of the mass-loss was due to the evaporation, instead of its thermal decomposition.     

The Crystal and Molecular Structure of γ‐P4S6

The crystal and molecular structure of γ‐P₄S₆ was determined from single‐crystal X‐ray diffraction. It crystallizes monoclinically in the space group P2₁/m (No. 11) with a = 6.627(3) Å, b = 10.504(7) Å, c = 6.878(3) Å, β = 90.18(4)°, V = 478.8(4) ų, and Z = 2. The structure consists of cage‐like P₄S₆ molecules with C_S symmetry arranged with the topology of a cubic close packing.     

4-硝基苯甲醇的低温热容和标准摩尔生成焓

用精密自动绝热量热计测定了4-硝基苯甲醇（4-NBA）在78 ~ 396 K温区的摩尔热容。其熔化温度、摩尔熔化焓及摩尔熔化熵分别为:(336.426 ± 0.088) K, (20.97 ± 0.13) kJ×mol-1 和 (57.24 ± 0.36) J×K-1×mol-1.根据热力学函数关系式,从热容值计算出了该物质在80 ~ 400 K温区的热力学函数值 [HT - H298.15 K] 和[ST - S298.15 K]. 用精密氧弹燃烧量热计测定了该物质在T＝298.15 K的恒容燃烧能和标准摩尔燃烧焓分别为 (C7H7NO3, s)＝- ( 3549.11 ± 1.47 ) kJ×mol-1 和 (C7H7NO3, s)＝- ( 3548.49 ± 1.47 ) kJ×mol-1. 利用标准摩尔燃烧焓和其他辅助热力学数据通过盖斯热化学循环, 计算出了该物质标准摩尔生成焓 (C7H7NO3, s)＝- (206.49 ± 2.52) kJ×mol-1 .