Mono- and Dialkylation of Derivatives of (1R, 2S)-2-Hydroxycyclopentanecarboxylic Acid and -cyclohexanecarboxylic acid via bicyclic dioxanones: Selective generation of three contiguous stereogenic centers on a cyclohexane ring

Ethyl (1R, 2S)-2-hydroxycyclopentanecarboxylate and -cyclohexanecarboxylate ( 1a and 2a , respectively) obtained in 40 and 70% yield by reduction of 3-oxocyclopentanecarboxylate and cyclohexanecarboxylate, respectively (Scheme 2), with non-fermenting yeast, are converted to bicyclic dioxanone derivatives 3 and 4 with formaldehyde, isobutyraldehyde, and pivalaldehyde (Scheme 3). The Li-enolates of these dioxanones are alkylated (→ 5a – 5i , 5j , 6a – 6g ), hydroxyalkylated (→ 51, m, 6d, e ), acylated (→ 5k, 6c ) and phenylselenenylated (→ 7 – 9 ) with usually high yields and excellent diastereoselectivities (Scheme 3, Tables and 2). All the major isomers formed under kinetic control are shown to have cis-fused bicyclic structures. Oxidation of the seleno compounds 7–9 leads to α, β-unsaturated carbonyl derivatives 10 – 13 (Scheme 3) of which the products 12a – c with the C?C bond in the carbocyclic ring (exocyclic on the dioxanone ring) are most readily isolated (70–80% from the saturated precursors). Michael addition of Cu(I)-containing reagents to 12a – c and subsequent alkylations afford dioxanones 14a – i and 16a – d with trans-fused cyclohoxane ring (Scheme 4). All enolate alkylations are carried out in the presence of the cyclic urea DMPU as a cosolvent. The configuration of the products is established by NMR measurements and chemical correlation. Some of the products are converted to single isomers of monocyclic hydroxycyclopentane ( 17 – 19 ) and cyclohexane derivatives ( 20 – 23 ; Scheme 5). Possible uses of the described reactions for EPC synthesis are outlined. The observed steric course of the reactions is discussed and compared with that of analogous transformations of monocyclic and acyclic derivatives.     

Photoinduzierte Cycloadditionen von 2,2-Dimethyl-3-phenyl-2H-azirin an Nitrile und «push-pull»-Olefine. 43. Mitteilung über Photoreaktionen

Photoinduced Cycloadditions of 2,2-Dimethyl-3-phenyl-2H-azirine with Nitriles and ‘push-pull’ Olefines. Electron deficient nitriles of the type 5a–e in contrast to nonactivated nitriles undergo regiospecific [2+3]cycloadditions to benzonitrile isopropylide ( 2b ), which was generated in situ by irradiation of 2,2-dimethyl-3-phenyl-2H-azirine ( 1b ), to yield the 2H-imidazole derivatives 6a – e (Scheme 2). The structure of the photoproducts was mainly deduced from ¹³C-NMR. and mass spectrometry. Whereas normal olefins or enolethers do not react with 2b , push-pull olefins of the type 10a – d readily undergo the cycloaddition to give the 3-alkoxy-5,5-dimethyl-2-phenyl-1-pyrrolines 11a – d (Scheme 3 and 4). The structure of the photoproducts 11a – d indicates that the regiospecificity of the cycloaddition corresponds to that of acrylonitriles and acrylesters with 2b .     

Synthesis and Photochemistry of 5,5-Dimethyl-1H-pyrrol-2(5H)-one and of Some N-Substituted Derivatives

In two steps, 5,5-dimethyl-1H-pyrrol-2(5H)-one ( 3a ) was prepared from 5,5-dimethylpyrrolidine-2,4-dione ( = dimethyltetramic acid; 4 ) in 71% overall yield (Scheme 1) and further converted to N-substituted derivatives 3b–f via acylation, alkylation, or methoxycarbonylation of its anion (Scheme 2). The substituents on the N-atom exert a strong influence on the photochemical reactivity ([2 + 2] photocycloaddition to 2,3-dimethylbut-2-ene, photocyclodimerisation, photoreduction) of these aza-enones 3 (Scheme 3). In general, N-alkyl compounds react much slower and with less efficiency than either the (N-unsubstituted) title compound 3a or its N-acetyl and N-(methoxycarbonyl) derivatives 3e and 3f , respectively. These compounds behave similarly to the corresponding lactone, 5,5-dimethyl-2(5H)-furanone, studied previously.     

Concise Synthesis of [1,1′‐Biisoquinoline]‐4,4′‐diol via a Protecting Group Strategy and Its Application for Potential Liquid‐Crystalline Compounds

The [1,1′‐biisoquinoline]‐4,4′‐diol ( 4a ), which was obtained as hydrochloride 4a ?2 HCl in two steps starting from the methoxymethyl (MOM)‐protected 1‐chloroisoquinoline 8 (Scheme 3), opens access to further O‐functionalized biisoquinoline derivatives. Compound 4a ?2 HCl was esterified with 4‐(hexadecyloxy)benzoyl chloride ( 5b ) to give the corresponding diester 3b (Scheme 4), which could not be obtained by Ni‐mediated homocoupling of 6b (Scheme 2). The ether derivative 2b was accessible in good yield by reaction of 4a ?2 HCl with the respective alkyl bromide 9 under the conditions of Williamson etherification (Scheme 4). Slightly modified conditions were applied to the esterification of 4a ?2 HCl with galloyl chlorides 10a – h as well as etherification of 4a ?2 HCl with 6‐bromohexyl tris(alkyloxy)benzoates 11b , d – h and [(6‐bromohexyl)oxy]‐substituted pentakis(alkyloxy)triphenylenes 14a – c (Scheme 5). Despite the bulky substituents, the respective target 1,1′‐biisoquinolines 12, 13 , and 15 were isolated in 14–86% yield (Table).     

Photochemical Reactions of N‐(2‐Halogenoalkanoyl) Derivatives of Anilines

The photochemical reactions of 2‐substituted N‐(2‐halogenoalkanoyl) derivatives 1 of anilines and 5 of cyclic amines are described. Under irradiation, 2‐bromo‐2‐methylpropananilides 1a – e undergo exclusively dehydrobromination to give N‐aryl‐2‐methylprop‐2‐enamides (=methacrylanilides) 3a – e (Scheme 1 and Table 1). On irradiation of N‐alkyl‐ and N‐phenyl‐substituted 2‐bromo‐2‐methylpropananilides 1f – m , cyclization products, i.e. 1,3‐dihydro‐2H‐indol‐2‐ones (=oxindoles) 2f – m and 3,4‐dihydroquinolin‐2(1H)‐ones (=dihydrocarbostyrils) 4f – m , are obtained, besides 3f – m . On the other hand, irradiation of N‐methyl‐substituted 2‐chloro‐2‐phenylacetanilides 1o – q and 2‐chloroacetanilide 1r gives oxindoles 2o – r as the sole product, but in low yields (Scheme 3 and Table 2). The photocyclization of the corresponding N‐phenyl derivatives 1s – v to oxindoles 2s – v proceeds smoothly. A plausible mechanism for the formation of the photoproducts is proposed (Scheme 4). Irradiation of N‐(2‐halogenoalkanoyl) derivatives of cyclic amines 5a – c yields the cyclization products, i.e. five‐membered lactams 6a , b , and/or dehydrohalogenation products 7a , c and their cyclization products 8a , c , depending on the ring size of the amines (Scheme 5 and Table 3).     

Tandem Hydroformylation/Reductive Amination of 3‐Allyl‐2‐methylquinazolin‐4(3H)‐one

The 3‐allyl‐2‐methylquinazolin‐4(3H)‐one ( 1 ), a model functionalized terminal olefin, was submitted to hydroformylation and reductive amination under optimized reaction conditions. The catalytic carbonylation of 1 in the presence of Rh catalysts complexed with phosphorus ligands under different reaction conditions afforded a mixture of 2‐methyl‐4‐oxoquinazoline‐3(4H)‐butanal ( 2 ) and α,2‐dimethyl‐4‐oxoquinazoline‐3(4H)‐propanal ( 3 ) as products of ‘linear’ and ‘branched’ hydroformylation, respectively (Scheme 2). The hydroaminomethylation of quinazolinone 1 with arylhydrazine derivatives gave the expected mixture of [(arylhydrazinyl)alkyl]quinazolinones 5 and 6 , besides a small amount of 2 and 3 (Scheme 3). The tandem hydroformylation/reductive amination reaction of 1 with different amines gave the quinazolinone derivatives 7 – 10 . Compound 10 was used to prepare the chalcones 11a and 11b and pyrazoloquinazolinones 12a and 12b (Scheme 4).     

Herstellung und Reaktionen der valenzpolaromeren Verbindung (4,4-Dimethyl-2-thiazolin-5-dimethyliminium)-2-thiolat ⇌ (1-Dimethylthiocarbamoyl-1-methyl-äthyl)-isothiocyanat aus 3-Dimethyl-amino-2,2-dimethyl-2H-azirin und Schwefelkohlenstoff

Synthesis and reactions of the valence polaromeric compound (4,4-dimethyl-2-thiazoline-5-dimethyliminium)-2-thiolate ? 1-dimethylthiocarbamoyl-1-methyl-ethyl isothiocyanate from 3-dimethylamino-2,2-dimethyl-2H-azirine and carbon disulfide. 3-Dimethylamino-2,2-dimethyl-2H-azirine ( 1 ) reacts with carbon disulfide to give crystals which have the dipolar structure 3a [(4,4-dimethyl-2-thiazoline-5-dimethyliminium)-2-thiolate, Scheme 1]. In solution, the non-dipolar (charge-free) isomeric form 3b (1-Dimethyl-thiocarbamoyl-1-methyl-ethyl isothiocyanate) is almost exclusively populated. Reaction products are derived from both forms: Derivatives of 3a are the hydrolysis product 6 , the sodium borohydride reduction product 7 and the methylation products 9 and 10 , respectively (Scheme 2). The isothiocyanate form 3b is responsible for the various reaction products with amines (Scheme 3). One of the reaction products with ammonia, namely 20 , is also obtained by the reaction of 1 with thiocyanic acid. Thermolysis of the azirine/carbon disulfide adduct 3 leads to 2-dimethylamino-4,4-dimethyl-2-thiazoline-5-thione ( 17 ) in high yield. A possible mechanism is outlined in Scheme 4. The same compound is also formed by rearrangement of 3 under the catalytic influence of dimethylamine. Its structure has been established by X-ray crystallography (section 4). Again a rearrangement is involved in the reductive (NaBH₄) conversion of 17 to 7 , the direct reduction product of the dipolar species 3a (Scheme 5). The isothiocyanate form 3b is able to react with a second molecule of 3-dimethylamino-2,2-dimethyl-2H-azirine ( 1 ) to yield compound 25 , which in the crystalline or dissolved state appears to be almost entirely populated by the carbodiimide form with structure 25b (Scheme 7), though all reaction products of 25 (reduction with sodium borohydride, addition of water or hydrogen sulfide, Schemes 7 and 8) are derived from the dipolar form 25a , not detectable as such; here again therefore there is a dynamic equilibrium 25a ? 25b . The two forms of adduct 3 , namely 3a and 3b , are obviously very easily interconverted at room temperature and therefore can be considered as valence polaromeric forms (section 5). A classification of the dipolar (zwitterionic) form is given, which allows a comparison of various dipolar species and gives as indication of charge stabilization by delocalization. The versatile reactivity of the 3-dimethylamino-2,2-dimethyl-2H-azirine/carbon disulfide adduct is demonstrated by the fact that with simple reagents approximately 25 derivatives have been obtained, most of them being new heterocyclic compounds.     

Synthesis of 4(pyrazol-3-yl)[1,2,4]triazolo[4,3-a]quinoxalines and tetrazolo analog

The transformation of 2-chloro-3-[5-(acetoxymethyl)-1-phenylpyrazol-3-yl]quinoxaline 3 to 1-aryl-4-[5-(hydroxymethyl-1-phenylpyrazol-3-yl][1,2,4]triazolo[4,3-a]quinoxalines 4a-c has been achieved upon treatment with aroylhydrazines in boiling butanol. Compounds 4a-c were smoothly acetylated by acetic anhydride to give their acetyl derivatives 5a-c in good yield. 4-[5-(Acetoxymethyl)-1-phenylpyrazol-3-yl]-1-methyl[1,2,4]triazolo[4,3-a]quinoxaline was prepared by ring closure of 2-hydrazino-3-[5-(hydroxymethyl)-1-phenylpyrazol-3-yl]quinoxaline 6 by the action of acetic anhydride. The reaction of 6 with acetylacetone afforded 3-[5-(hydroxymethyl)-1-phenylpyrazol-3-yl]-2-(3,5-dimethylpyrazol-1-yl)quinoxaline 8 . In addition, the reaction of 3 with sodium azide in boiling N, N-dimethylformamide yielded the fused tetrazolo[1,5-a]quinoxaline 9 .     

Exceptional Products of the Desulfurization of N,2-Diaryl-5-(arylimino)- 2,5-dihydro-4-nitroisothiazol-3-amines

The desulfurization of several N,2-diaryl-5-(arylimino)-2,5-dihydro-4-nitroisothiazol-3-amines 5 with Ph₃P led to complex mixtures of products in low yields. For instance, quinoxaline-2-carboxamide 1-oxides of type 6 (Scheme 2) and, in some cases, also 3-nitroquinolines of type 7 (Scheme 5) were isolated. By the desulfurization of the substituted derivatives 5b – e , a rearrangement of the intermediates yielded 6 and 7 with a different substitution pattern from that expected from the starting materials (Scheme 3). The additional formation of two isomeric 1,2,5-oxadiazole-3-carboxamides 8 was observed only in the case of 5d (R¹=R²=F) (Scheme 6). Under the same reaction conditions, the major product of the desulfurization of 5c was the quinoxaline-2-carboxamide 1-oxide 9 (Scheme 7). Reaction mechanisms involving intermediate ketene imines and O transfer from the NO₂ group to the neighboring ketene imine are proposed. The structures of 6a , 6e , 6k , 7b , and 8d were established by X-ray crystallography, while the structure of 9 was elucidated by 2D-NMR spectroscopy and corroborated by X-ray crystallography.     

New beta-lactam antibiotics. Cephem derivatives with electron withdrawing substituents at position 3 (author's transl)]

New β-lactam antibiotics. Cephem derivatives with electron withdrawing substituents at position 3 Oxidation of the 3-formyl-2-cephem compound 1 according to Corey [6] gave 2-cephem-3-carboxylic esters 4a, b, c (Scheme 1), which proved to be useful intermediates for the synthesis of cephalosporins bearing in position 3 a methoxycarbonyl group (10a, b, c, d / Scheme 2) or a carboxy group (20, 25, 30/Schemes 3, 4). The 3-formyl-3-cephem compounds 31a, b could be transformed into cyano- (33a) or methoxyiminomethyl- (36a, c, d) cephems (Scheme 5), which represent further examples of cephalosporins with electron withdrawing groups in position 3.     

Transformation of Amino Acids into Nonracemic 1‐(Heteroaryl)ethanamines by the Enamino Ketone Methodology

N‐Protected L ‐phenylalanines 1a,b were transformed, via the corresponding Weinreb amides 2 and ethynyl ketones 3 , into chiral enamino ketones 4 (Scheme 1). Similarly, L ‐threonine 6 was transformed in four steps into the enamino ketone 10 . Cyclocondensations of 4 and 10 with pyrazolamines 11 , benzenecarboximidamide ( 12 ), and hydrazine derivatives 18 afforded N‐protected 1‐heteroaryl‐2‐phenylethanamines 15a – e, 16, 17 , and 21a – k and 1‐heteroaryl‐1‐aminopropan‐2‐ols 23a,b in good yields (Schemes 2 and 3). Finally, deprotection by catalytic hydrogenation furnished free amines 22a – g and 24a,b (Scheme 3).     

[(1,3-Dioxolan-2-yliden)methyl]phosphonate und -phosphinate als (einfache) Synthone in der Heterocyclensynthese

[(1,3-Dioxolan-2-ylidene)methyl]phosphonates and -phosphinates as [simple] Synthons in Heterocyclic Synthesis The readily available [(1,3-dioxolane-2-ylidene)methyl]phosphonates and -phosphinates 2a–f (Scheme 1) can be transformed with amines to aliphatic ketene N,O-and N,N-acetales (see Scheme 2, 2a → 3–7 ). Alkanediamines yield with 2a–f the imidazolidines 8a–f and the hexahydropyrimidines 9a–d (Scheme 3). the oxazolidine derivatives 10a–e and the thiazolidine 11 are accessible under special reaction conditions starting from 2a, b (Scheme 4). Hydrazines react with the CN-group-containing ketene O,O-acetals 2a–c to the pyrazoles 12a–g , whereof 12a, d, e can be cyclized to pyrazolo[1,5-a]pyrimidines 13a–d (Scheme 5). Amidines as starting materials transform 2a–c in an analogous way to the pyrimidine derivatives 14a–c (Scheme 6).     

An Efficient Synthesis of Novel Benzo‐Fused Macrocyclic Dilactams

A facile synthetic approach was adopted towards the synthesis of benzo‐fused macrocyclic lactams 2a – 2g via the base‐catalyzed condensation reaction of 2,2′‐[alkanediylbis(oxy)]bis[benzaldehydes] 3a – 3c with N,N′‐substituted bis[2‐cyanoacetamide] derivatives 7a – 7c (Scheme 2). The latter compounds were obtained by the reaction of the appropriate diamines 6a – 6c with ethyl 2‐cyanoacetate ( 4 ). Attempts to prepare the oxaaza macrocycles 2 by alternative pathways were also investigated. The novel pyrazolo‐fused macrocycles 13a and 13b were obtained in 48 and 52% yield, respectively, upon treatment of 2d and 2g with NH₂NH₂?H₂O at 100° (Scheme 4).     

Synthesis of (5′S)‐5′‐C‐Alkyl‐2′‐deoxynucleosides

We describe the synthesis of (5′S)‐5′‐C‐butylthymidine ( 5a ), of the (5′S)‐5′‐C‐butyl‐ and the (5′S)‐5′‐C‐isopentyl derivatives 16a and 16b of 2′‐deoxy‐5‐methylcytidine, as well as of the corresponding cyanoethyl phosphoramidites 9a , b and 14a , b , respectively. Starting from thymidin‐5′‐al 1 , the alkyl chain at C(5′) is introduced via Wittig chemistry to selectively yield the (Z)‐olefin derivatives 3a and 3b (Scheme 2). The secondary OH function at C(5′) is then introduced by epoxidation followed by regioselective reduction of the epoxy derivatives 4a and 4b with diisobutylaluminium hydride. In the latter step, a kinetic resolution of the diastereoisomer mixture 4a and 4b occurs, yielding the alkylated nucleoside 2a and 2b , respectively, with (5′S)‐configuration in high diastereoisomer purity (de=94%). The corresponding 2′‐deoxy‐5‐methylcytidine derivatives are obtained from the protected 5′‐alkylated thymidine derivatives 7a and 7b via known base interconversion processes in excellent yields (Scheme 3). Application of the same strategy to the purine nucleoside 2′‐deoxyadenine to obtain 5′‐C‐butyl‐2′‐deoxyadenosine 25 proved to be difficult due to the sensitivity of the purine base to hydride‐based reducing agents (Scheme 4).     

Synthesis of pyrazole derivatives as potential bioisosteres of thromboxane-synthetase inhibitors

A series of ω-carboalkenyl pyrazole derivatives have been synthesized as potential thromboxane-synthetase inhibitors considering the close bioisosteric relationship between the pyrazole ring and other heteroaromatic carboalkenyl compounds exhibiting inhibitory activity. (E)-7-(1-Phenylpyrazol-4-yl)hept-2-enoic acid (4b) were prepared in 28% overall yield from its minor bis-homologue, (E)-5-(1-phenylpyrazol-4-yl)pent-2-enoic acid (4a) , obtained from 4-formyl-1-phenylpyrazole (6) in 17% overall yield. Compounds 4a, 4b, 7, 8 and 13 were screened for their ability to inhibit the in vitro rabbit blood platelet aggregation induced by collagen using the Born test. Among the active compounds 4a exhibited an important inhibition at 1 μM concentration.     

Nucleosides and Oligonucleotides with Diynyl Side Chains: Base Pairing and Functionalization of 2′‐Deoxyuridine Derivatives by the Copper(I)‐Catalyzed Alkyne?Azide ‘Click’ Cycloaddition

Oligonucleotides containing the 5‐substituted 2′‐deoxyuridines 1b or 1d bearing side chains with terminal C?C bonds are described, and their duplex stability is compared with oligonucleotides containing the 5‐alkynyl compounds 1a or 1c with only one nonterminal C?C bond in the side chain. For this, 5‐iodo‐2′‐deoxyuridine ( 3 ) and diynes or alkynes were employed as starting materials in the Sonogashira cross‐coupling reaction (Scheme 1). Phosphoramidites 2b – d were prepared (Scheme 3) and used as building blocks in solid‐phase synthesis. T_m Measurements demonstrated that DNA duplexes containing the octa‐1,7‐diynyl side chain or a diprop‐2‐ynyl ether residue, i.e., containing 1b or 1d , are more stable than those containing only one triple bond, i.e., 1a or 1c (Table 3). The diyne‐modified nucleosides were employed in further functionalization reactions by using the protocol of the Cu^I‐catalyzed Huisgen–Meldal–Sharpless [2+3] cycloaddition (‘click chemistry’) (Scheme 2). An aliphatic azide, i. e., 3′‐azido‐3′‐deoxythymidine (AZT; 4 ), as well as the aromatic azido compound 5 were linked to the terminal alkyne group resulting in 1H‐1,2,3‐triazole‐modified derivatives 6 and 7 , respectively (Scheme 2), of which 6 forms a stable duplex DNA (Table 3). The Husigen–Meldal–Sharpless cycloaddition was also performed with oligonucleotides (Schemes 4 and 5).     

Photochemical Reactions of Tetrahydroquinoxalin-2(1H)-ones and Related Compound

Photochemical behaviors of the pyrazinone derivatives 5,6,7,8-tetrahydroquinoxalin-2(1H)-ones 1a – c and 1,5,6,7,8,9-hexahydro-2H-cyclohepta[b]pyrazin-2-one 1d were investigated. Dye-sensitized photo-oxygenation of 1a-c gave the 1:1 adducts 5a – c of the corresponding 3,8a-epidioxy-3,5,6,7,8,8a-hexahydroquinoxalin-2(1H)-one 4 and H₂O, whereas 1d gave 3,9a-epidioxy-1,3,5,6,7,8,9,9a-octahydro-2H-cyclohepta[b]pyrazin-2-one 4d (Scheme 2). The different kind of products was interpreted as being the result of the ring strain and steric hindrance of endoperoxides produced from 1a – d with singlet oxygen. Irradiation of 1a – b in the presence of alkenes gave tricyclic azetidine derivatives 9 by [2 + 2] cycloaddition of the C?N bond of 1 to the alkene.     

Diazo-Transfer Reaction with Diphenyl Phosphorazidate

Diphenyl phosphorazidate (DPPA) was used as the azide source in a one-pot synthesis of 2,2-disubstituted 3-amino-2H-azirines 1 (Scheme 1). The reaction with lithium enolates of amides of type 2 , bearing two substituents at C(2), proceeded smoothly in THF at 0°; keteniminium azides C and azidoenamines D are likely intermediates. Under analogous reaction conditions, DPPA and amides of type 3 with only one substituent at C(2) gave 2-diazoamides 5 in fair-to-good yield (Scheme 2). The corresponding 2-diazo derivatives 6–8 were formed in low yield by treatment of the lithium enolates of N,N-dimethyl-2-phenylacetamide, methyl 2-phenylacetate, and benzyl phenyl ketone, respectively, with DPPA. Thermolysis of 2-diazo-N-methyl-N-phenylcarboxamides 5a and 5b yielded 3-substituted 1,3-dihydro-N-methyl-2H-indol-2-ones 9a and 9b , respectively (Scheme 3). The diazo compounds 5–8 reacted with 1,3-thiazole-5 (4H)-thiones 10 and thiobenzophenone ( 13 ) to give 6-oxa-1,9-dithia-3-azaspiro[4.4]nona-2,7-dienes 11 (Scheme 4) and thiirane-2-carboxylic acid derivatives 14 (Scheme 5), respectively. In analogy to previously described reactions, a mechanism via 1,3-dipolar cycloaddition, leading to 2,5-dihydro-1,3,4-thiadiazoles, and elimination of N₂ to give the ‘thiocarbonyl ylides’ of type H or K is proposed. These dipolar intermediates with a conjugated C?O group then undergo either a 1,5-dipolar electrocyclization to give spirohetrocycles 11 or a 1,3-dipolar electrocyclization to thiiranes 14 .     

Umsetzung von Di(tert-butyl)- und Diphenyldiazomethan mit 1,3-Thiazol-5(4H)-thionen: Isolierung und Kristallstruktur des primären Cycloadduktes

Reaction of Di(tert-butyl)- and Diphenyldiazomethane and 1,3-Thiazole-5(4H)-thiones: Isolation and Crystal Structure of the Primary Cycloadduct Reactions of diazo compounds with C?S bonds proceed via the formation of thiocarbonyl ylides, which, under the reaction conditions, undergo either 1,3-dipolar cycloadditions or electrocyclic ring closer to thiiranes (Scheme 1). With the sterically hindered di(tert-butyl)diazomethane ( 2c ), 1,3-thiazole-5(4H)-thiones 1 react to give spirocyclic 2,5-dihydro-1,3,4-thiadiazoles 3 (Scheme 2). These adducts are stable in solution at ?20°, and they could be isolated in crystalline form. The structure of 3c was established by X-ray crystallography. In CDCl₃ solution at room temperature, a cycloreversion occurs, and the adducts of type 3 are in an equilibrium with 1 and 2c . In contrast, the reaction of 1 with diphenyldiazomethane ( 2d ) gave spirocyclic thiiranes 4 as the only product in high yield (Scheme 3). The crystal structure of 4b was also determined by X-ray analysis. The desulfurization of compounds 4 to 4,5-dihydro-5-(diphenylmethylidene)-1,3-thiazoles 5 was achieved by treating 4 with triphenylphosphine in boiling THF. The crystal structure of 5f is shown.     

The 1,3-Dipolar Cycloadditions of Nitrile Oxides and Nitrile Imines to Alkyl Dicyanoacetates

The readily available alkyl dicyanoacetates 1 reacted with the 1,3-dipolar reagents arenecarbonitrile oxides 2 ′ and arenecarbonitrile imines 5 ′ to afford 1,2,4-oxadiazol and 1,2,4-triazol derivatives. The arenecarbonitrile oxides 2 ′ with electron-donating groups on the arene ring gave products 3a – d resulting from addition on both CN groups of 1 , and those with electron-withdrawing groups provided mono-adducts 4a – e (Scheme 1). Arylnitrile imines 5 ′ reacted with 1 to offer both bis- and mono-addition products (Scheme 2); the bis-adducts 8a , b possess an ester structure, whereas the mono-adducts 6a – d present a ketene-hemiacetal structure.