Synthesis and Characterization of Liquid-Crystalline Tetraoxapentacene Derivatives Exhibiting Aggregation-Induced Emission

A series of new tetrakis(dialkoxyphenyl) dicyanotetraoxapentacene derivatives ( 1 a – c ) were prepared by reaction of the appropriate terphenyl diols with tetrafluoroterephthalonitrile in good yields. Compounds 1 b and 1 c , which bear hexyloxy and decyloxy side chains, exhibited columnar hexagonal mesophases, as shown by polarized optical microscopy, variable-temperature powder X-ray diffraction, and differential scanning calorimetry. Single-crystal X-ray diffraction of methoxy-substituted 1 a revealed that the dicyanotetraoxapentacene core is highly planar, consistent with the notion that these molecules are able to stack in columnar mesophases. A detailed photophysical characterization showed that these compounds exhibit aggregation-induced emission in solution, emission in nonpolar solvents, weak emission in polar solvents, and strong emission in the solid state both as powder and in thin films. These observations are consistent with a weakly emissive charge-transfer state in polar solvents and a more highly emissive locally excited state in nonpolar solvents.     

Synthesis and Electroluminescence of Metal 4‐Styryl‐8‐hydroxyquinolates

Aluminum and zinc complexes of 4‐substituted 8‐hydroxyquinoline were used effectively as emissive materials in light‐emitting diodes (LED). The substituents chosen in this study were p‐methoxy‐2‐styryl, p‐diethylamino‐2‐styryl, and naphthalene‐2‐vinyl groups. Their emission spectra were red‐shifted with respect to that of aluminum tris(hydroxylquinolate) (Alq₃) as a result of extending their π‐conjugation. All complexes formed amorphous glasses, which exhibited high thermal and electrical stability. Typical LED devices were fabricated by mixing the dyes with polyvinylcarbazole and spin‐coated to form thin films, which were sandwiched between ITO (indium tin oxide) and a metal electrode. These devices displayed yellow‐orange emissions with quantum efficiency ca. 0.4%.     

Electroinitiated Polymerization of 3,3-BIS(N-Carbazolylmethyl)Oxetane

Abstract

3,3-Bis(N-carbazolylmethyl)oxetane, a cyclic compound with carbazolyl substituents closely linked to the oxetane ring, was polymerized by electrochemical initiation in aprotic polar solvents using a quaternary ammonium salt as electrolyte. Colored polymers were obtained as thin films deposited on the anode and were characterized by IR, ¹H NMR, and thermogravimetry. The data obtained refute the classical cationic polymerization of oxetanes.     

Synthesis and optical properties of novel blue‐light‐emitting poly(p‐phenylene vinylene) derivatives with pendant oxadiazole or cyano groups

Two novel poly(p‐phenylene vinylene) polymers, which carried side substituents with cyano groups or 1,3,4‐oxadiazole, were synthesized by Heck coupling. They consisted of alternating conjugated segments and nonconjugated aliphatic spacers. The polymers had moderate molecular weights, were amorphous, and dissolved readily in tetrahydrofuran and halogenated organic solvents. They were stable up to approximately 340 °C in N₂ and 290 °C in air, and the anaerobic char yield was around 60% at 800 °C. The polymer with cyano side groups emitted blue light in solutions and thin films with identical photoluminescence (PL) maximum at 450 nm; this supported the idea that chain interactions were hindered even in the solid state. The PL maximum of this polymer in thin films was blueshifted upon annealing at 120 °C, indicating a thermochromic effect as a result of conformational changes in the polymer backbone. The polymer containing side substituents with oxadiazole rings emitted blue light in solutions with a PL maximum at 474 nm and blue‐greenish light in thin films with a PL maximum at 511 nm. The PL quantum yields of the polymers in tetrahydrofuran were 0.13–0.24. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1768–1778, 2004     

Synthesis,Crystal Structures,and Properties of 6,12‐Diaryl‐Substituted Indeno[1,2‐b]fluorenes

Fused polycyclic indeno[1,2‐b]fluorene derivatives with aryl substituents at the 6,12‐positions have been prepared as a potential antiaromatic 20π electronic system. They showed strong absorptions in the visible region and amphoteric redox properties. The quinoid‐type molecular structures were revealed by X‐ray crystal‐structure analysis, which indicated that the bond lengths of the quinoid unit depend on the aryl substituents. Whereas nucleus‐independent chemical shift NICS(1) calculations indicate the antiaromatic nature of the s‐indacene core, they have higher stability than substituted acene derivatives. The derivatives with difluorophenyl or anthryl groups were stable in solution. Vapor‐deposited thin films showed ambipolar carrier transportation in the field‐effect transistor devices.     

Intramolecular photocyclization of N-[(2-haloaryl)methyl]pyridinium and n-(arylmethyl)-2-halopyridinium salts

Various N-[(2-haloaryl)methyl]pyridinium, N-(arylmethyl)-2-halopyridinium and N-(2-halobenzyl)iso-quinolinium salts have been synthesized and their intramolecular photocyclization reactions studied. Upon irradiation the aqueous solution of N-[(2-haloaryl)methyl]pyridinium, and N-arylmethyl-2-halopyridinium salts 1, 2 were cyclized to give isoindolium salts. In contrast to the pyridinium salts 1, 2 , the aqueous solution of N-(2-halobenzyl)isoquinolinium salts 3 appear not to undergo photocyclization. N-Benzyl-2-chloropyridinium salts 1c is more reactive than N-(2-chlorobenzyl)pyridinium salt 1a in the photocyclization. N-(2-Chlorobenzyl)-2-chloropyridinium salt 1d is three times more reactive than 1c . A mechanism of π-complex formation of the halogen moiety of the pyridinium ring with the phenyl ring is suggested for the reactive pyridinium salt. The triplet energy of the isoquinolinium salts 3 is tool low to photocyclize.     

Preparation of amino-functionalized mesoporous silica thin films with highly ordered large pore structures

Highly ordered amino-functionalized mesoporous silica thin films have been directly synthesized by co-condensation of tetraethoxysilane (TEOS) and 3-aminopropyltriethoxysilane (APTES) in the presence of triblock copolymer Pluronic P123 surfactant species under acidic conditions by sol-gel dip-coating. The effect of the sol aging on thin films organization is systematically studied, and the optimal sol aging time is obtained. The amino-functionalized mesoporous silica thin films exhibit a long-range ordering of 2D hexagonal (p6mm) mesostructure with a large pore size of 8.3 nm, a large Brunauer–Emmett–Teller (BET) specific surface area of 680 m² g⁻¹ and a large pore volume of 1.06 cm³ g⁻¹ following surfactant extraction as demonstrated by X-ray diffraction (XRD), Transmission electron microscope (TEM), and physical adsorption techniques. Based on BET surface area and weight loss, the surface coverage of amino-groups for the amino-functionalized mesoporous silica thin films is calculated to be 3.2 amino-groups per nm². Moreover, the functionalized thin films display improved properties for immobilization of cytochrome c in comparison with pure-silica mesoporous thin films.     

Blue‐emitting poly(1,3‐phenylenevinylene) derivatives: Effect of substitution patterns on optical properties

Blue‐emitting poly{[5‐(diphenylamino)‐1,3‐phenylenevinylene]‐alt‐(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)} ( 3 ), poly{[5‐bis‐(4‐butyl‐phenylamino)‐1,3‐phenylenevinylene]‐alt‐(1,3‐phenylene vinylene)} ( 4 ), and poly(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene) ( 5 ) were synthesized by the Wittig–Horner reaction. Although polymers 3–5 possess fluorescent quantum yields of only 13–34% in tetrahydrofuran solution, their films appear to be highly luminescent. Attachments of substituents tuned the emission color of thin films to the desirable blue region (λ_max = 462–477 nm). Double‐layer light‐emitting‐diode devices with 3 and 5 as an emissive layer produced blue emission (λ_em = 474 and 477 nm) with turn‐on voltages of 8 and 11 V, respectively. The external quantum efficiencies were up to 0.13%. © 2005Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2800–2809, 2005     

Giant extended pi-conjugated dendrimers containing the 10,15-dihydro-5H-diindeno[1,2-a;1',2'-c]fluorene chromophore: synthesis, NMR behaviors, optical properties, and electroluminescence

This paper reports the facile synthetic strategy of a series of novel pi-conjugated dendrimers (G0 and G1) based on 10,15-dihydro-5H-diindeno[1,2-a;1',2'-c]fluorene (truxene) in which the benzene cores are generated "in-situ" from acetyl aromatics by the acid-promoted cyclotrimerizations. The unique NMR behaviors, physical properties, and electroluminescence device applications are also presented. Besides the purity, the structure, and the confirmation of the successful formation and isolation of desired compounds by clear assignments of every molecule by (1)H and (13)C and 2D NMR characterizations, several astonishing NMR behaviors have been observed in various solvents. For 1, chemical shift values belonging to H-2' of hexyl substituents move to the most upfield; however, such chemical shift values move from 0.48 to 0.85 ppm when pyridine-d(5) or benzene-d(6) is used as solvent. Our dendrimers as the emissive layers in organic light-emitting diodes gave blue-green light with an external quantum efficiency up to 0.16% both for G0 and for G1 in nitrogen, respectively, which exhibit unique electroluminescence spectra in comparison with their corresponding photoluminescence ones.     

Conjugated polymers containing large soluble diethynyl iptycenes

[structures: see text] An efficient synthesis of large iptycenes appended with alkoxy and ethynyl substituents is reported. The rigid shape-persistent iptycene scaffold prevents interactions between the polymer backbones and can be used to solubilize polymers containing less soluble but readily accessible comonomers to prepare functional, solution-processible poly(p-phenyleneethynylene) (PPE)-conjugated polymers. These polymers are highly emissive in thin films without significant excimer/exciplex formation as a result of the effective chain isolation enforced by the iptycene units.     

Head‐to‐Tail Zig‐Zag Packing of Dipolar Merocyanine Dyes Affords High‐Performance Organic Thin‐Film Transistors

Attachment of bulky substituents at both thiophene donor (D) and thiazole acceptor (A) heterocycles of a dipolar (μ_g=10.4 D) D‐π‐A merocyanine dye affords a more than 1 Å expansion of the common antiparallel supramolecular dimer motif in the solid state, enabling very close π‐contacts (3.36 Å) to two other neighbor molecules on each of the two remaining π‐faces. This unusual packing motif leads to three‐dimensional percolation pathways for hole transport and affords thin‐film transistors with mobility up to 0.64 cm² V^?1 s^?1.     

Syntheses and properties of two-dimensional, dicationic nonlinear optical chromophores based on pyrazinyl cores

Six new dicationic 2D nonlinear optical (NLO) chromophores with pyrazinyl-pyridinium electron acceptors have been synthesized by nucleophilic substitutions of 2,6-dichloropyrazine with pyridyl derivatives. These compounds have been characterized as their PF(6)(-) salts by using various techniques including electronic absorption spectroscopy and cyclic voltammetry. Large red shifts in the intense, π → π* intramolecular charge-transfer (ICT) transitions on replacing -OMe with -NMe(2) substituents arise from the stronger π-electron donor ability of the latter. Each compound shows a number of redox processes which are largely irreversible. Single crystal X-ray structures have been determined for five salts, including two nitrates, all of which adopt centrosymmetric packing arrangements. Molecular first hyperpolarizabilities β have been determined by using femtosecond hyper-Rayleigh scattering at 880 and 800 nm, and depolarization studies show that the NLO responses of the symmetric species are strongly 2D, with dominant "off-diagonal" β(zyy) components. Stark (electroabsorption) spectroscopic measurements on the ICT bands afford estimated static first hyperpolarizabilities β(0). The directly and indirectly derived β values are large, and the Stark-derived β(0) response for one of the new salts is several times greater than that determined for (E)-4'-(dimethylamino)-N-methyl-4-stilbazolium hexafluorophosphate. These Stark spectroscopic studies also permit quantitative comparisons with related 2D, binuclear Ru(II) ammine complex salts.     

Synthesis of bis‐N‐alkyl imidazolium salts and their palladium(0)(NHC)(η2‐MA)2 complexes

New N‐Alkyl‐substituted imidazolium salts as well as a series of their corresponding [Pd(NHC)(MA)₂] complexes have been obtained by three routes in good yield. The previously reported synthesis for the analogous N‐aryl substituted [Pd(NHC)(MA)₂] complexes has been improved. The N‐alkyl‐substituted [Pd(NHC)(MA)₂] complexes are thermally more labile than their N‐aryl counterparts. Catalytic transfer semi‐hydrogenation of phenylpropyne resulted in good to excellent chemo‐ and stereo‐ selectivity conversion into (Z)‐phenylpropene. The size of the alkyl substituents correlates with the rate of hydrogenation in the sense that more bulky substituents give rise to faster transfer hydrogenation rates. Copyright © 2012 John Wiley & Sons, Ltd.     

Twisted Polycyclic Arenes from Tetranaphthyldiphenylbenzenes by Controlling the Scholl Reaction with Substituents

Herein, we report two new types of twisted polycyclic arenes ( 2 a , b and 3 a , b ) with constitutionally isomeric π‐backbones, which are synthesized by controlling the Scholl reaction of 1,2,4,5‐tetra(naphth‐2‐yl)‐3,6‐diphenylbenzene ( 1 ) with properly positioned electron‐donating substituents. With a polycyclic backbone containing two [5]helicene and four [4]helicene moieties, 2 a and b are new members of multiple helicenes with interesting stereochemistries. The as‐synthesized 2 a and b are the twisted isomers, and thermal isomerization of twisted‐ 2 b results in anti‐ 2 b , a more stable stereoisomer. Both twisted‐ and anti‐ 2 b have been fully characterized, and the thermal isomerization of twisted‐ 2 b has been studied with ¹H NMR spectroscopy and DFT calculations. Compounds 3 a and b are new members of twistacenes, the benzannulated pentacene backbone of which exhibits an end‐to‐end twist as found from the crystal structure. Twisted‐ and anti‐ 2 b are also found to function as p‐type semiconductors in solution‐processed thin film transistors, whereas the thin films of 3 b appear insulating presumably due to the lack of π–π interactions.     

Solid‐State Phosphorescence of trans‐Bis(salicylaldiminato)platinum(II) Complexes Bearing Long Alkyl Chains: Morphology Control towards Intense Emission

Morphology control for intense solid‐state phosphorescence of non‐emissive, but potentially emissive crystals of platinum complexes and the mechanistic rationale are described. A series of trans‐bis(salicylaldiminato)platinum(II) complexes bearing linear alkyl chains ( 1 a : n=5; 1 b : n=8; 1 c : n=12; 1 d : n=14; 1 e : n=16; 1 f : n=18) was synthesized and the solid‐state emission properties were examined by using crystals/aggregates prepared under various precipitation conditions. Crystals of 1 e , prepared using “kinetic” conditions including rapid cooling, high concentrations, and poor solvents, emit intensive yellow phosphorescence (λ_max=545 nm) under UV irradiation at 298 K with an absolute quantum efficiency of 0.36, whereas all the crystals of 1 a – 1 f prepared using “thermodynamic” conditions including slow cooling, low concentrations, and good solvents were either non‐ or less emissive with Φ_298K values of 0.12 ( 1 a ), 0.11 ( 1 b ), 0.10 ( 1 c ), 0.07 ( 1 d ), 0.02 ( 1 e ), and 0.02 ( 1 f ) under the same measurement conditions. The amorphous solid 1 e , prepared by rapid cooling and freeze‐drying, was also non‐emissive (Φ_298K=0.02, 0.02). Temperature‐dependent emission spectra showed that the kinetic crystals of 1 e exhibit high heat‐resistance towards emission decay with increasing temperature, whereas the amorphous solid 1 e is entirely heat‐quenchable. This is a rare example of the change from a non‐emissive crystal into a highly emissive crystal by morphology control through crystal engineering. Emission spectra and powder X‐ray diffraction (XRD) patterns of the emissive, kinetic crystals of 1 e are clearly distinct from those of the less emissive, thermodynamic crystals of 1 a – 1 f . Single‐crystal XRD unequivocally establishes that the thermodynamic crystals of 1 d have a multilayered lamellar structure supported by highly regulated, consecutive π‐stacking interactions between imine moieties, whereas the kinetic crystals of 1 e have a face‐to‐edge lamellar structure with less stacking. These results lead to the conclusion that 1) morphology control of long‐chained complexes exclusively generates a metastable herringbone‐based lamellar packing motif that exhibits intense emission and high heat‐resistance, while 2) a thermodynamically stable, highly regulated, consecutive stacking motif is unfavorable for solid‐state emission.     

Inorganic Thin Films Prepared from Soluble Powders and Their Applications

Sol-gel processing has proved to be a useful method for the preparation of a wide range of inorganic thin films. However, gelation or precipitation of coating solutions and thus limited shelf-life have been drawbacks for the industrial application of this technology.Soluble powders of various compositions can be prepared from modified metal alkoxides commonly employed in sol-gel processing. Even though these powders contain a considerable amount of organic moieties they can be stored indefinitely under ambient conditions, thus diminishing shelf life problems. Redissolution in polar organic solvents, solvent mixtures or even water yields ready-to-use coating solutions. Coating solutions for the preparation of titania (TiO₂), zirconia (ZrO₂) and lead zirconate titanate (PbTi _x Zr_1–x O₃, PZT) films have been synthesized by this method. Thickness, microstructure and properties of the resulting films can be varied by modification of the solvent, the coating procedure and thermal treatment. Inorganic thin films for various applications have been prepared.     

Regioselective Synthesis of 1,2,3,4-Tetrasubstituted Arenes by Vicinal Functionalization of Arynes Derived from Aryl(Mes)iodonium Salts**

Herein, the synthesis of 1,2,3,4-tetrasubstituted benzenoid rings, motifs found in pharmaceutical, agrochemical, and natural products, is described.^[1] In the past, the regioselective syntheses of such compounds have been a significant challenge. This work reports a method using substituted arynes derived from aryl(Mes)iodonium salts to access a range of densely functionalized 1,2,3,4-tetrasubstituted benzenoid rings. Significantly, it was found that halide substituents are compatible under these conditions, enabling post-synthetic elaboration via palladium-catalyzed coupling. This concise strategy is predicated on two regioselective events: 1) ortho- deprotonation of aryl(Mes)iodonium salts to generate a substituted aryne intermediate, and 2) regioselective trapping of said arynes, thereby improving previously reported reaction conditions to generate arynes at room temperature and in shorter reaction times. Density functional theory (DFT) computations and linear free energy relationship (LFER) analysis suggest the regioselectivity of deprotonation is influenced by both proximal and distal ring substituents on the aryne precursor. A competition experiment further reveals the role of arene substituents on relative reactivity of aryl(Mes)iodoniums as aryne precursors.     

Luminescence and upconversion from thulium(iii) species in solution

Thulium salts and complexes are shown to be emissive from three states in the excited state manifold of Tm(3+). Formation of the (1)D(2) state can result in luminescence, or in energy transfer to the lower energy (1)G(4) and (3)H(4) emissive states. Where chromophores are present in the ligand structure, emission is restricted to thulium centred emissive states that are lower in energy than the chromophore centred donor state. We have also observed direct multi-photon excitation of the thulium excited state manifold. Furthermore, additional transitions are observed in the multi-photon excitation spectra that are consistent with upconversion as a consequence of sequential single photon absorption and relaxation processes within the thulium excited state manifold.     

Hydrophobic, Highly Conductive Ambient-Temperature Molten Salts

New, hydrophobic ionic liquids with low melting points (<-30 degrees C to ambient temperature) have been synthesized and investigated, based on 1,3-dialkyl imidazolium cations and hydrophobic anions. Other imidazolium molten salts with hydrophilic anions and thus water-soluble are also described. The molten salts were characterized by NMR and elemental analysis. Their density, melting point, viscosity, conductivity, refractive index, electrochemical window, thermal stability, and miscibility with water and organic solvents were determined. The influence of the alkyl substituents in 1, 2, 3, and 4(5)-positions on these properties was scrutinized. Viscosities as low as 35 cP (for 1-ethyl-3-methylimidazolium bis((trifluoromethyl)sulfonyl)amide (bis(triflyl)amide) and trifluoroacetate) and conductivities as high as 9.6 mS/cm were obtained. Photophysical probe studies were carried out to establish more precisely the solvent properties of 1-ethyl-3-methylimidazolium bis((trifluoromethyl)sulfonyl)amide). The hydrophobic molten salts are promising solvents for electrochemical, photovoltaic, and synthetic applications.     

Relaxor type perovskites: Primary candidates of nano-polar regions

Relaxor properties of 0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃ (PMN-PT) and non-lead perovskite thin films have been analysed in terms of large frequency dispersion of dielectric response at low temperatures. A wide spectrum of dielectric relaxation was observed in the frequency-dependent response of the imaginary part of the dielectric permittivity. Transformation from normal ferroelectric to relaxor behaviour has been observed in the case of the Ca substituting the BaTiO₃ thin films. A number of techniques were exploited to investigate the wide spectrum of relaxation times in pulsed laser ablated thin films.ac anddc electric field induced complex dielectric properties of 0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃ (PMN-PT) thin films were studied as function of frequencies at different temperatures. Nonlinear behaviour of dielectric susceptibility with respect to the amplitude of theac drive was observed at lower temperatures. The frequency dependence of transition temperatureT _m (temperature of the maximum of dielectric constant) was studied using the Vogel-Fulcher relation. Dedicated to Professor C N R Rao on his 70th birthday