Self‐Assembled Cyclic Structures from Copper(II) Peptoids

Metal–ligand coordination is a key interaction in the self‐assembly of both biopolymers and synthetic oligomers. Although the binding of metal ions to synthetic proteins and peptides is known to yield high‐order structures, the self‐assembly of peptidomimetic molecules upon metal binding is still challenging. Herein we explore the self‐assembly of three peptoid trimers bearing a bipyridine ligand at their C‐terminus, a benzyl group at their N‐terminus, and a polar group (N‐ethyl‐R) in the middle position (R=OH, OCH₃, or NH₂) upon Cu²⁺ coordination. X‐ray diffraction analysis revealed unique, highly symmetric, dinuclear cyclic structure or aqua‐bridged dinuclear double‐stranded peptoid helicates, formed by the self‐assembly of two peptoid molecules with two Cu²⁺ ions. Only the macrocycle with the highest number of intermolecular hydrogen bonds is stable in solution, while the other two disassemble to their corresponding monometallic complexes.     

Density Functional Theory Study of Selectivity of Crown Ethers to Li+ in Spent Lithium-Ion Batteries Leaching Solutions

It is a challenge to recover lithium from the leaching solution of spent lithium-ion batteries, and crown ethers are potential extractants due to their selectivity to alkali metal ions. The theoretical calculations for the selectivity of crown ethers with different structures to Li ions in aqueous solutions were carried out based on the density functional theory. The calculated results of geometries, binding energies, and thermodynamic parameters show that 15C5 has the strongest selectivity to Li ions in the three crown ethers of 12C4, 15C5, and 18C6. B15C5 has a smaller binding energy but more negative free energy than 15C5 when combined with Li⁺, leading to that the lithium ions in aqueous solutions will combine with B15C5 rather than 15C5. The exchange reactions between B15C5 and hydrated Li⁺, Co²⁺, and Ni²⁺ were analyzed and the results show that B15C5 is more likely to capture Li⁺ from the hydrated ions in an aqueous solution containing Li⁺, Co²⁺, and Ni²⁺. This study indicates that it is feasible to extract Li ions selectively using B15C5 as an extractant from the leaching solution of spent lithium-ion batteries.     

A Highly Copper‐Selective Ratiometric Fluorescent Sensor Based on BODIPY

A new ratiometric fluorescent sensor ( 1 ) for Cu²⁺ based on 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) with di(2‐picolyl)amine (DPA) as ion recognition subunit has been synthesized and investigated in this work. The binding abilities of 1 towards different metal ions such as alkali and alkaline earth metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺) and other metal ions ( Ba²⁺, Zn²⁺, Cd²⁺, Fe²⁺, Fe³⁺, Pb²⁺, Ni²⁺, Co²⁺, Hg²⁺, Ag⁺) have been examined by UV‐vis and fluorescence spectroscopies. 1 displays high selectivity for Cu²⁺ among all test metal ions and a ～10‐fold fluorescence enhancement in I₅₈₂/I₅₅₈ upon excitation at visible excitation wavelength. The binding mode of 1 and Cu²⁺ is a 1:1 stoichiometry determined via studies of Job plot, the nonlinear fitting of the fluorometric titration and ESI mass.     

A DFT Study on the Selective Extraction of Metallic Ions by 12-Crown-4

In order to predict the extraction ability of 12-crown-4 for different metallic ions, the complexes [M(12-crown-4)] and [M(H₂O)₄] (where M=Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, Ca²⁺, Cu²⁺ and Zn²⁺) were investigated by the density functional theory without restrictions for their geometry. The metal binding capability was evaluated using the binding energy, and the effect of nature of the metal on the binding properties was also studied. The results of the calculations showed that the coordination ability of a donor molecule towards different metal ions increased in proportion to their ionization potential. In addition, based on the extraction distribution coefficient, we found that 12-crown-4 can selectively extract Cu²⁺ and Be²⁺ ions from aqueous solutions of mixed cations. Obviously, the stability of complexes and the extraction power of extractants depend greatly on the nature of the metal ions. Calculation results from our study could be used to predict the extraction power of this crown ether and could play a guiding role in planning experiments.     

A New Fluorescent Chemosensor for Cu2+ Based on 1,2,3,4,5,6,7,8,9,10‐Decahydroacridine‐1,8‐dione Fluorophore

A new chemosensor for Cu²⁺ was synthesized based on 1,2,3,4,5,6,7,8,9,10‐decahydroacridine‐1,8‐dione dyes, which exhibited an obvious fluorescent selectivity to the sensing of Cu²⁺ ions over other cations, such as Na⁺, K⁺, Ca²⁺, Cd²⁺, Co²⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Zn²⁺, Ag⁺ and Pb²⁺. Moreover, it presented a fluorescent switch function when EDTA was added to the compound‐Cu²⁺ complex in examined systems.     

Synthesis and characterization of novel silica gel supported N-pyrazole ligand for selective elimination of Hg(II)

The polar organic molecule N-(2-hydroxyethyl)-3,5-dimethylpyrazole reacted with a 3-glycidoxypropyltrimethoxysilane silylant agent, previously anchored on a silica surface in a heterogeneous way to yield the product SiPz. The epoxide group was opened yielding chelating pendant group bonded to the inorganic surface. The product was characterized through elemental analysis, infrared spectroscopy, ¹³C NMR, surface area and thermogravimetry. The binding and adsorption abilities of SiPz was investigated for Hg²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Zn²⁺, K⁺, Na⁺ and Li⁺ cations and compared to results of classical liquid-liquid extraction with the unbound N-pyrazole compound. The grafting at the surface of silica does not affect complexing properties of the ligand and the SiPz exhibits a high selectivity toward Hg²⁺ ion with no complexation being observed towards Zinc and alkali metals. The extracted and the complexing cation percentage were determined by atomic absorption measurements.     

Design and synthesis of a new coumarin-based ‘turn-on’ fluorescent probe selective for Cu

The novel coumarin-based ‘turn-on’ fluorescent probe (E)-3-(2,5-dimethoxybenzylideneamino)-7-hydroxy-2H-chromen-2-one (MGM) was designed, synthesized, and characterized. This compound shows high selectivity for Cu⁺², combined with a large fluorescence enhancement upon binding to Cu²⁺. Benesi-Hildebrand and Job plots demonstrate that the stoichiometry of the Cu²⁺ complex formed is 2:1. Preliminary studies employing epifluorescence microscopy demonstrated that Cu⁺² could be imaged in human neuroblastoma SH-SY5Y cells treated with MGM.     

Chromatographic separation of inorganic ions on specially prepared calcium sulphate sticks

It has been shown⁶ that specially prepared calcium sulphate sticks are suitable as adsorbent bodies in the chromatographic separation of inorganic ions. With the help of these sticks separations of Cu⁺² — Sb⁺³, Bi⁺³ — Sb⁺³, Cd⁺² — Sb⁺³, Cd⁺² — Sn⁺², Hg⁺² — AS⁺³, Hg⁺² — Sb⁺³, Cu⁺² — As⁺³, Bi⁺³ — As⁺³, Hg⁺² — Cu⁺², Cu⁺² — Fe⁺³ have been effected.     

Highly selective colorimetric naked-eye Cu2+ detection using new bispyrazolone silver nanoparticle-based chemosensor

In this work, we have successfully developed novel silver nanoconjugates of pyrazolone analogue and screened its chemosensing potential in aqueous medium. Bispyrazolone silver nanoparticles (Bispyra-AgNPs) were synthesised and characterised through FTIR, UV-visible spectroscopy and atomic force microscopy. The sensing ability was explored towards Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Li⁺, Pb²⁺, La³⁺, Hg²⁺, Mg²⁺, Ni²⁺ and Ba²⁺ metal ions, respectively. Bispyra-AgNPs showed a highly quenching potential in selective recognition of Cu²⁺and colour of the solution immediately turned from yellow to purple, after the addition of Cu²⁺ in to the solution. The developed method also displayed a remarkable selectivity for Cu²⁺ over others interfering metal ions. The binding ratio and stoichiometry of host-guest complex was found to be 1:1 and determined by Job’s method. The propose method is facile and sensitive to detect Cu²⁺ with detection limit of 10 µM.     

Aminopyridyl derivative of thiacalix[4]arene-carboxylic acid as ionizable highly selective Ag+ ionophore

A novel mono-ionizable receptor 2 possessing three aminopyridyl and one carboxylic group in 1,3-alternate conformation based on thiacalix[4]arene, confirmed by single crystal X-ray analysis, was prepared. For competitive solvent extraction of alkali metal (Na⁺, K⁺ and Cs⁺) and some transition metal (Cu²⁺, Zn²⁺, TI⁺, Ag⁺) cations from aqueous solutions into chloroform, it was found that the introduction of proton-ionizable group (carboxylic acid moiety) into the aminopyridyl-thiacalix[4]arene derivative could further improve its Ag⁺ extractability with high selectivity.     

Synthesis and complexation study of calix[4]arene diamine derivative incorporated in a polymeric backbone with chiral monomers

The novel chiral polymeric compounds containing more than one calix[4]arene have been synthesized by reacting a new calix[4]arene diamine derivative with two chiral monomers. These newly prepared compounds were studied by extraction of toxic heavy metal (Cu²⁺, Co²⁺, Cd²⁺, Hg²⁺), silver and alkali metal (Na⁺, K⁺) cations from aqueous phase. It was observed that the resulting calixarene-based polymers have a good complexing ability towards silver, alkali metal and toxic heavy metal cations.     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.     

一种基于硫杂杯[4]芳烃的高效银离子载体

合成了基于下缘含有酰肼基团的硫杂杯芳烃衍生物的银离子载体1,其核磁研究证实硫杂杯芳烃以1,3-交替构象存在,并且通过非竞争萃取实验和竞争萃取实验研究了它对碱金属和过渡金属离子（Li⁺, Na⁺, K⁺, Cs⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Ag⁺）的键合能力和选择性。实验结果表明：将酰肼基团引入1,3-交替构象的硫杂杯芳烃骨架的下缘可以提高其对Ag⁺的键合能力和选择性,同时,对Cu²⁺的萃取能力较弱,对碱金属离子和其它的重金属离子几乎没有萃取能力。进一步的核磁滴定和电喷雾质谱实验显示化合物1与银离子形成配合物的配合计量比为1：1,由此推断主要由“N-Ag⁺”配位键以及硫杂杯芳烃骨架的协同作用构成了化合物1与银离子的配合模式。     

Quantitative Trennung von Schwermetallen mit Chelataustauschern auf der Basis von Polystyrol

Zusammenfassung Die Trennung und Isolierung von folgenden Schwermetallen bei einem hohen Überschuß an Fremdionen mit Hilfe neuer selektiver Chelataustauscher wird beschrieben: Cu²⁺/Zn²⁺, Cu²⁺/Pb²⁺, Ag⁺/Cu²⁺, Ag⁺/Pb²⁺, Hg²⁺/Zn²⁺, Hg²⁺/Cd²⁺; Abtrennung von Hg²⁺. Unter gleichen Bedingungen war mit dem handelsüblichen Austauscher Dowex A-1 keine Trennung möglich.

---

Quantitative separation of heavy metals by means of chelating exchangers based on polystyrol

Summary The separation and isolation of the following heavy metals in presence of a high excess of foreign ions by means of new selective chelating exchangers is described: Cu²⁺/Zn²⁺, Cu²⁺/Pb²⁺, Ag⁺/Cu²⁺, Ag⁺/Pb²⁺, Hg²⁺/Zn²⁺, Hg²⁺/Cd²⁺; separation of Hg²⁺. Under the same conditions no separation could be achieved by the ion-exchanger Dowex A-1.

     

Complexation of late transition metal(II) ions (M = Co,Ni, Cu,and Zn) by a macrocyclic thiacrown ether studied by means of electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry (ESI‐MS) is used to probe the metal‐binding selectivity of a macrocyclic thiacrown ether (C₄₄H₃₂S₂₀) towards Co^II, Ni^II, Cu^II, and Zn^II. In homogeneous 1:1 v/v methanol/dichloromethane solutions, it is found that the thia ligand very selectively binds traces of copper even in the presence of an excess of the other metal ions. The large selectivity is ascribed to the redox‐active nature of copper which enables a reduction from Cu^II to Cu^I, occurring upon ESI‐MS, whereas Co^II, Ni^II and Zn^II cannot undergo similar redox reactions. Copyright © 2009 John Wiley & Sons, Ltd.     

Phenylethylidene-3,4-dihydro-1H-quinoxalin-2-ones: promising building blocks for Cu recognition

A series of sulfonamido-substituted phenylethylidene-3,4-dihydro-1H-quinoxalin-2-one derivatives in which both of the fluorophore and ionophore are integrated into one structural unit, have been investigated. They all exhibit high selectivity toward Cu²⁺ in ethanol in the presence of other metallic ions (Zn²⁺, Mg²⁺, Co²⁺, Ni²⁺, Mn²⁺, Ca²⁺, and Ag⁺), as well as fast, stable, and reversible binding, as is evidenced by the observation of a red shift in the UV-vis spectrum, ‘ON-OFF’ fluorescence response. In addition, titration and MALDI-TOF measurements indicated that a 1:1 (and possibly also 2:1 (organic ligand: Cu²⁺) complexes were formed, depending on the relative amount of Cu²⁺ added to the solution of the organic ligand. It was also found that the binding constant could be tuned by modifying the nature and position of the substituents attached to the central benzene ring in the quinoxalone derivative. In acetonitrile, unlike in ethanol, these ligands undergo oxidation-decomposition by Cu²⁺ and therefore, no UV-vVis absorption bands could be observed. However, due to color change (from yellow to transparent) they could be useful as dosimeters in this solvent.     

Highly Efficient and Selective Membrane Transport of Silver(I) Using Dibenzodiaza‐15‐Crown‐4 as a Selective Ion Carrier

A chloroform membrane system containing dibenzodiaza‐15‐crown‐4 was found to be a highly efficient and selective transport of Ag⁺ ions through a chloroform liquid membrane. In the presence of thiosulfate ion as a suitable ion stripping agent in the receiving phase, the amount of silver transported across the liquid membrane after 105 minis 95 ± 1.3%. The selectivity of Ag⁺transport from aqueous solutions containing Tl⁺, Pb²⁺, Cd²⁺, Ni²⁺, Co²⁺, K⁺, Ca²⁺, Sr²⁺, Hg²⁺, Zn²⁺, Cu²⁺was investigated. The interfering effect of Cu²⁺ ions was drastically diminished in the presence of EDTA as a proper masking agent in the source phase.     

Mo3S132− Intercalated Layered Double Hydroxide: Highly Selective Removal of Heavy Metals and Simultaneous Reduction of Ag+ Ions to Metallic Ag0 Ribbons

We demonstrate a new material by intercalating Mo₃S₁₃^2? into Mg/Al layered double hydroxide (abbr. Mo₃S₁₃-LDH), exhibiting excellent capture capability for toxic Hg²⁺ and noble metal silver (Ag). The as-prepared Mo₃S₁₃-LDH displays ultra-high selectivity of Ag⁺, Hg²⁺ and Cu²⁺ in the presence of various competitive ions, with the order of Ag⁺>Hg²⁺>Cu²⁺>Pb²⁺≥Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺. For Ag⁺ and Hg²⁺, extremely fast adsorption rates (≈90 % within 10 min, >99 % in 1 h) are observed. Much high selectivity is present for Ag⁺ and Cu²⁺, especially for trace amounts of Ag⁺ (≈1 ppm), achieving a large separation factor (SF_Ag/Cu) of ≈8000 at the large Cu/Ag ratio of 520. The overwhelming adsorption capacities for Ag⁺ (q_m^Ag=1073 mg g^?1) and Hg²⁺ (q_m^Hg=594 mg g^?1) place the Mo₃S₁₃-LDH at the top of performing sorbent materials. Most importantly, Mo₃S₁₃-LDH captures Ag⁺ via two paths: a) formation of Ag₂S due to Ag-S complexation and precipitation, and b) reduction of Ag⁺ to metallic silver (Ag⁰). The Mo₃S₁₃-LDH is a promising material to extract low-grade silver from copper-rich minerals and trap highly toxic Hg²⁺ from polluted water.     

A new perylene diimide-based colorimetric and fluorescent sensor for selective detection of Cu<Superscript>2+</Superscript> cation

A new perylene diimide (PDI) ligand (1) functionalized with a dipicolylethylenediamine (DPEN) moiety was synthesized and first used as a colorimetric and fluorometric dual-channel sensor to specifically detect the presence of Cu²⁺ over a wide range of other cations. The solution of 1 (10 μmol/L) upon addition of Cu²⁺ displayed distinguishing pink color compared with other cations including K⁺, Ni²⁺, Ca²⁺, Mn²⁺, Na⁺, Sr²⁺, Zn²⁺, Co²⁺, Cd²⁺, Mg²⁺, Cr³⁺, Ag⁺, and Ba²⁺, indicating the sensitivity and selectivity of 1 to Cu²⁺. Thus, the advantage of this assay is that naked-eye detection of Cu²⁺ becomes possible. Moreover, among these metal ions investigated, only Cu²⁺ quenched more than half fluorescent intensity of 1. The ESI-TOF spectrum of a mixture of 1 and CuCl₂ in combination of the fluorescence titration spectra of 1 (10 μmol/L) upon addition of various amounts of Cu²⁺ revealed the formation of a 2:1 metal-ligand complex through the metal coordination interaction. Supported by the National Natural Science Foundation of China (Grant Nos. 20872101 & 20772086)     

Voltammetric determination of mercury (II) in aqueous media using glassy carbon electrodes modified with novel calix[4]arene

A novel calix[4]arene derivative containing benzothiazole group was coated on glassy carbon electrode (GCE) and then applied to the recognition of mercury ion. Cyclic and square wave voltammetric results showed that the modified electrode selectively recognizes Hg²⁺ ion in aqueous media. A new anodic stripping peak at −0.3 V (vs. Ag/Ag⁺) can be obtained by scanning the potential from −0.6 to 0.6 V, and the peak currents are proportional to the Hg²⁺ concentration. The modified electrode in a 0.1 M H₂SO₄+0.01 M NaCl solution shows linear voltammetric response in the range of 25-300 μg l⁻¹ and detection limit of 5 μg l⁻¹ (ca. 2.5×10⁻⁸ M). This modified GCE does not present any significant interference from alkali, alkaline and transition metal ions except for Pb²⁺, Ag⁺ and Cu²⁺ ions. Only 500, 50 and 100-fold molar excess of Pb²⁺, Ag⁺ and Cu²⁺ ions, respectively, can lead to voltammetric response comparable with that of Hg²⁺. The proposed method was successfully applied to determine mercury in natural water.