Usy supported Pt-bearing SO42?/ZrO2 catalysts promoted by Cr for hydroisomerization of n -heptane

The Pt-bearing SO₄ ²⁻/ZrO₂ catalysts doped with Cr and supported on USY zeolite were prepared by impregnation, and characterized by XRD and IR spectroscopy of pyridine adsorption. Their catalytic activities were evaluated in the hydroisomerization of n-heptane with a fixed-bed atmospheric reactor. The Cr-promoted catalysts exhibited much higher catalytic activity and selectivity for isomerization products than the catalysts without the Cr dopant. Both the conversion and selectivity were discussed in relation with the physicochemical properties of catalysts.     

Effect of the nature of zeolite and modifying additives on the activity of zeolite-containing catalysts inn-butane isomerization

Isomerization ofn-butane on various types of zeolites (ZVM, ZVK, mordenite, and Y) modified with transition metals and cationic and anionic additives was investigated. Under the conditions studied, H-forms of zeolites are inactive. Pt-containing systems based on the H-form of ZVM (HZVM) are the most efficient catalysts forn-butane isomerization, and the yield of isobutane reaches 20–26 wt.% at a selectivity of 40–45%. Modification of this catalyst with Ga and Fe compounds or with an aqueous solution of HCl increases the selectivity with respect to isobutane up to 70–90%. Introduction of Zn²⁺ cations or F⁻ and SO₄ ²⁻ anions into the Pt-containing HZVM system decreases the selectivity and yield of isobutane due to the formation of very strong acidic centers on which disproportionation and hydrocracking ofn-butane mainly occur. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1281–1285, July, 1999.     

锶助剂对铂锡催化剂正丁烷脱氢催化性能的影响

负载型ＰｔＳｎ／Ａｌ２Ｏ３催化剂已广泛地应用于工业生产中［１］，人们正尝试着添加不同助剂以改变催化剂的反应性能。文献的工作主要集中在研究铂锡催化剂中添加助剂对载体表面酸性的调变作用。在烃类重整催化剂中，加入氟、氯等元素可增强载体的表面酸性［２］，提高...     

Ternary [Al2O3–electrolyte–Cu] species: EPR spectroscopy and surface complexation modeling

Cu²⁺ binding on γ-Al₂O₃ is modulated by common electrolyte ions such as Mg²⁺, , and in a complex manner: (a) At high concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ is inhibited. This is partially due to bulk ionic strength effects and, mostly, due to direct competition between Mg²⁺ and Cu²⁺ ions for the SO⁻ surface sites of γ-Al₂O₃. (b) At low concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ can be enhanced. This is due to synergistic coadsorption of Cu²⁺ and electrolyte anions, and _. This results in the formation of ternary surface species (SOH₂SO₄Cu)⁺, (SOH₂PO₄Cu), and (SOH₂HPO₄Cu)⁺ which enhance Cu²⁺ uptake at pH < 6. The effect of phosphate ions may be particularly strong resulting in a 100% Cu uptake by the oxide surface. (c) EPR spectroscopy shows that at pH  pH_PZC, Cu²⁺ coordinates to one SO⁻ group. Phosphate anions form stronger, binary or ternary, surface species than sulfate anions. At pH  pH_PZC Cu²⁺ may coordinate to two SO⁻ groups. At pH  pH_PZC electrolyte ions and are bridging one O-atom from the γ-Al₂O₃ surface and one Cu²⁺ ion forming ternary [γ-Al₂O₃/elecrolyte/Cu²⁺] species.     

Electrochemical properties of <Emphasis Type="Italic">n</Emphasis>-sulfonatothiacalyx[4]arene complexes with Fe<Superscript>3+</Superscript> and [Co(dipy)<Subscript>3</Subscript>]<Superscript>3+</Superscript> ions

The electrochemical properties of n-sulfonatothiacalyx[4]arene (H₄XNa₄) complexes with [Co(dipy)₃]³⁺ and Fe³⁺ ions were studied by means of cyclic voltammetry in aqueous solution at pH 2.5. The observed single-electron reduction of [Co(dipy)₃]³⁺ bound extraspherically to the upper rim and Fe³⁺ ion bound intraspherically to the lower rim of n-sulfonatothiacalyx[4]arene in binary [Co(dipy)₃]³⁺ · H₃X^5?, H₃X^5? · Fe³⁺, and ternary [Co(dipy)₃]³⁺ · H₃X^5? · Fe³⁺ heterometal complexes was more difficult than in the free state. The reversible single-electron transfer to the metal ion results in lower binding energy ([Co(dipy)₃]³⁺, ΔΔG ₀ = 3.9 kJ/mol) or in full fast dissociation of the complex (Fe³⁺). The ternary complex in the solution forms the aggregates, in which inner encapsulated Fe(III) and Co(III) ions are not reduced on the electrode. Their quantitative reduction takes place by the relay mechanism of intra- and intermolecular electron transfer through electrochemically generated [Co(dipy)₃]²⁺ outer ions.     

Silver(I) ions-enhanced electrochemiluminescence of tris(2,2-bipyridyl)ruthenium(II)

In this paper, we demonstrate an electrochemiluminescence (ECL) enhancement of tris(2,2-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) by the addition of silver(I) ions. The maximum enhancement factor of about 5 was obtained on a glassy carbon electrode in the absence of co-reactant. The enhancement of ECL intensity was possibly attributed to the unique catalytic activity of Ag⁺ for reactions between Ru(bpy)₃³⁺ with OH. The higher enhancement was observed in phosphate buffer solutions compared with that from borate buffer solutions. This resulted from the fact that formation of nanoparticles with large surface area in the phosphate buffer solution exhibited high catalytic activity. The amount of Ag⁺, solution pH and working electrode materials played important roles for the ECL enhancement. We also studied the effects of Ag⁺ on Ru(bpy)₃²⁺/tripropylamine and Ru(bpy)₃²⁺/C₂O₄²⁻ ECL systems.     

Al含量对Pt-SO2-4 /ZrO2-Al2O3固体超强酸催化

通过向SO^2-₄ /ZrO₂催化剂中同时引入适量的Pt和Al₂O₃, 制备出了具有较高催化性能和稳定性的Pt-SO^2-₄ /ZrO₂-Al₂O₃型固体超强酸催化剂. 以正戊烷异构化反应为探针, 考察了Al含量对催化剂性能的影响; 并采用X射线衍射(XRD)、比表面积测定(BET)、红外(IR)光谱、程序升温还原(TPR)、热重-差热分析(TG-DTA)和氨-程序升温脱附(NH₃-TPD)手段对催化剂进行了表征. 结果表明, Al能够提高ZrO₂的晶化温度, 抑制硫的分解, 增加催化剂的比表面积, 增强硫氧键的结合, 提高催化剂的还原性能, 增加催化剂的酸强度和酸总量. 当Al₂O₃含量(质量分数, w)为5.0%时, Pt-SO^2-₄ /ZrO₂-Al₂O₃固体超强酸催化剂的催化活性最好, 在100 h内异戊烷收率可稳定在52.0%以上, 选择性在98.2%以上.     

Pt/SO42??ZrO2: The state of platinum and its relation with catalytic activity inn-hexane isomerization

Pt/SO₄ ²⁻−ZrO₂ calcined at 873 K shows the same catalytic activity forn-hexane isomerization as the calcined and reduced sample. A platinum reduction peak did not appear in the TPR profile and the presence of Pt⁰ was detected by XPS on the only calcined Pt/SO₄ ²⁻−ZrO₂. Nevertheless, this calcined material does not show hydrogen chemisorption and cyclohexane dehydrogenation activity.     

Catalytic Performance of Re/Ga2O3/WO3/ZrO2 Catalyst for n-Hexane Isomerization

A series of Re/Ga₂O₃/WO₃/ZrO₂ catalysts were prepared by the impregnation method. The crystalline structure, redox, and acid site distribution of the catalysts were characterized by X-ray powder diffraction, temperature-programmed reduction of H₂, and temperature-programmed desorption of NH₃. Their catalytic performance for n-hexane isomerization was studied. The results showed that the addition of Re greatly affected the redox properties and the acid site distribution of the catalysts. Owing to the presence of Re, n-hexane isomerization was catalyzed by metal and acid sites, and thus the conversion of n-hexane and the selectivity for 2,2-dimethylbutane were significantly increased. Under the conditions of 195 °C, 1.0 MPa, LHSV = 1.0 h⁻¹, and n(H₂)/n(C₆) = 2.0, the conversion of n-hexane over 1.0%Re/1.0%Ga₂O₃/WO₃/ZrO₂ is 84.8%, and the selectivities for 2,2-dimethylbutane, i-hexane, and cracking products (C_5-) are 20%, 97.7%, and 2.1%, respectively. The catalyst is stable during 150 h operation.     

MnO2 nanozyme induced the chromogenic reactions of ABTS and TMB to visual detection of Fe2+ and Pb2+ ions in water

In this study, we used a simple and rapid colourimetric reaction for visual sensing of Fe²⁺ and Pb²⁺ ions in water by employing nano-MnO₂ as a natural oxidase mimic to respectively catalyse ABTS and TMB in citrate-phosphate buffer solution (C-PBS) at 25°C and pH 3.8. It was found that nano-MnO₂ possessed highly oxidase-mimicking activity with the K_m values of 0.030 and 0.027 toward ABTS and TMB, respectively, indicating TMB had a stronger affinity on nano-MnO₂ than ABTS. Interestingly, the presence of 0.01 mmol·L^?1 Fe²⁺/Pb²⁺ ion was able to significantly down-regulate the activity of MnO₂ nanozyme in nano-MnO₂-mediated ABTS reaction processes (P < 0.01), which mainly due to the strong adsorption of metal ion toward nano-MnO₂ surface via the electrostatic attractions, thus leading to the passivation and inactivation of MnO₂ nanozyme catalytic activity. Thereinto, Fe²⁺ reacted with multivalent manganese by oxidation-reduction, while Pb²⁺ was specifically adsorbed onto the surface of MnO₂ nanozyme and formed complexes. Notably, only Fe²⁺ ion inhibited the activity of MnO₂ nanozyme-TMB with a detection limit as low as 1.0 μmol·L^?1. In MnO₂ nanozyme-ABTS sensing systems, Fe²⁺ and Pb²⁺ ions detection limit of 0.5 and 2.0 μmol·L^?1 were, respectively, achieved with a linear response range of 0–0.02 and 0–0.8 mmol·L^?1, implying the developed MnO₂ nanozyme-ABTS sensor was potentially applicable for the visual determination of Fe²⁺ and Pb²⁺ ions in water. In the real water samples, MnO₂ nanozyme-ABTS achieved high accuracy (relative errors: 3.4?10.5%) and recovery (96?110%) for respective detection of Fe²⁺ and Pb²⁺ ions. The simple and rapid MnO₂ nanozyme-ABTS sensing systems might provide a practical assay for visual detection of Fe²⁺ and Pb²⁺ ions in the environmental water samples.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

不同硅铝比Cu-ZSM-5纳米片上N2O催化分解

以双季铵盐表面活性剂为模板剂,水热条件下合成了硅铝比(nSi/nAl)为18、26和95的ZSM-5沸石纳米片,采用离子交换方法制备了铜改性的ZSM-5纳米片样品,并测试了其催化分解N_2O性能。结合X射线衍射(XRD)、N_2吸附/脱附、X射线荧光光谱(XRF)、扫描电镜(SEM)、透射电镜(TEM)、氢气程序升温还原(H_2-TPR)、氧气程序升温脱附(O_2-TPD)和原位红外漫反射光谱(CODRIFT)等表征结果 ,探讨了沸石硅铝比对于催化剂N_2O分解性能的影响及其原因。结果表明,ZSM-5纳米片硅铝比越低,CuZSM-5纳米片催化剂的活性越高。催化活性的提高归因于低硅铝比催化剂上Cu~+活性物种可还原性的增强和吸附氧脱附能力的提高。     

Theoretical calculations of95Mo-NMR chemical shifts for compounds [MoO4−n S n ]2−

Summary Theoretical calculation of⁹⁵Mo-NMR chemical shifts for [MoO_4–n S _n ]^2– (n=0–4) compounds is reported here for the first time on the basis of Fenske-Hall method and Sum-Over-State (SOS) perturbation theory. A systematic decrease in shielding of⁹⁵Mo nuclei with increase of number of sulfur in [MoO_4–n S _n ]^2–, which is observed experimentally, can be reasonably explained by our calculation. A good linear relationship between chemical shifts of calculation and experiment is obtained. The electronic structure and bonding in these compounds are also discussed.Supported by Nature Science Foundation of China     

Theoretical studies of the reactions of O(3P) with halogenated methyl (I)

The reaction of o(³P) with CH₂C1 radical has been studied usingab initio molecular orbital theory. G2 (MP.2) method is used to calculate the geometrical parameters, vibrational frequencies and energies of various stationary points on the potential energy surface. The reaction mechanism is revealed. The addition of o(³P) with CH₂Cl leads to the formation of an energy rich intermediate OCH₂Cl^* which can subsequently undergo decomposition or isomerization to the final products. The calculated heat of reaction for each channel is in agreement with the experimental value. The production of H+CHClO and C1+CH₂O are predicted to be the major channels. The overall rate constants are calculated using transition state theory on the basis ofab initio data. The rate constant is pressure independent and exhibits negative temperature dependence at lower temperatures, in accordance with the experimental results.     

Microwave synthesis and photoluminescent properties of Sr2CeO4/Ln3+ (Ln = Er, Ho, Tm)

Sr₂CeO₄/Ln³⁺ (Ln = Er, Ho, Tm) phosphors were synthesized with the microwave radiation method for the first time. The luminescent properties of the samples were investigated and the up-conversion luminescence of Er³⁺, Ho³⁺ and Tm³⁺ doped Sr₂CeO₄ phosphors was observed. The spectra indicate that the energy transfer takes place from the triplet excited state of MLCT (metal-to-ligand charge transfer) state for Sr₂CeO₄ (sensitizer) to the rare earth ions (activator). __________ Translated from Journal of Hebei Normal University (Natural Science Edition), 2007, 31(2): 212–216 [译自: 河北师范大学学报 (自然科学版)]     

Ag3PO4/Ag2S/g-C3N4复合光催化剂的制备与性能

通过沉积法和离子交换法成功地制备了Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化剂。利用X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、N_2吸附-脱附等温线、紫外-可见漫反射光谱、荧光光谱等手段对样品进行了表征。通过降解罗丹明B考察其可见光催化活性及稳定性,研究了硫化钠与磷酸银物质的量的比值(n_(Na_2S)/n_(Ag_3PO_4))、g-C_3N_4添加量对所制备复合光催化材料性能的影响,同时对光催化机理进行了探讨。结果表明,随着n_(Na2S)/n_(Ag3PO4)的增加,所得复合催化材料活性先增加后降低;当n_(Na2S)/n_(Ag_3PO_4)为1.5%、g-C_3N_4与Ag_3PO_4的质量比为3∶7时制备的催化剂ASC1.5的光催化活性最好,在可见光照射下,40 min内可将罗丹明B完全降解,且5次循环使用后仍保持较高的催化活性。和Ag_3PO_4相比,Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化材料的活性与稳定性都得到明显提高,这主要归因于复合催化剂比表面积和孔结构的增加,载流子分离效率的提高。光催化机理研究表明,空穴(h~+)、超氧阴离子自由基(·O~(2-))和羟基自由基(·OH)都是光催化过程中的主要活性物种。三者作用大小依次为:h~+·O~(2-)·OH。     

Theoretical sstudy on the Co2+OH2+/Co3+OH2+ electron transfer reactivity

This paper presents a contact distance dependence analysis scheme and an abinitio calculation application for the electron transfer (ET) reactivity of Co²⁺OH₂/Co³⁺OH² reacting pair. The applicability of these schemes and the corresponding models has been discussed. The contact distance (R _CoCo) dependence of the relevant quantities has been analyzed. The results indicate that the activation energy from the accurate PES method agrees well with that from the anharmonic potential method, and they are obviously better than that from the harmonic potential method. The pair distribution function varies from 10⁻² to 10⁻⁵ along withR _CoCo changing from 1.20 to 0.35 nm. The coupling matrix element exponentially decays along with the increase ofR _CoCo, and the effective electronic coupling requiresR _CoCo smaller than 0.75 nm. In the range from 0.50 to 0.75 nm forR _CoCo, the corresponding electronic transmission coefficient falls within 1.0—10⁻⁶. The local ET rate also exponentially decays along with the increase ofR _CoCo due to the electronic factor. Since the contribution from the pair distribution function to the total ET rate is an inverse measure of that from the electronic factor, the variation of the spherically averaged local ET rate along withR _CoCo exhibits a parabola with a maximum at 0.50 nm ofR _CoCo. This maximum is close to the overall observed ET rate value. For this mono-hydrated transition metal ionic system, the ET rate generally is about 10⁶ L·mol⁻¹·s⁻¹ in gaseous process. Further, since it is impossible to experimentally determine the structures and their PESs of these hydrated systems, especially for the unstable intermediate species,ab initio calculations can play an effective auxiliary role in discussing the ET reactivities of these kinds of reacting systems.     

苯乙烯三嗪衍生物的合成及在重金属离子识别中的应用

合成了2,4-二(2-噻吩乙烯基)-6-(4'-N,N-二甲氨基苯乙烯基)-1,3,5-均三嗪(2)并鉴定了其结构。在乙腈-水混合介质中,化合物2在355和416nm处呈现双吸收峰,加入Cu²⁺,Hg²⁺ 和Fe³⁺ 后,均在520nm附近形成新的吸收峰。化合物2与Cu²⁺、Hg²⁺ 和Fe³⁺ 均形成1:1型配合物,其结合常数分别为1.9×10⁵L·mol^-1,6.6×10³L·mol^-1,2.7×10³L·mol^-1。对照化合物4与金属离子的光谱响应与化合物2相似,仅吸收峰的位置不同。因此,可认为化合物2和4中三嗪环中的N和噻吩环中的S与Cu²⁺、Hg²⁺ 和Fe³⁺ 共同配位形成了稳定的金属配合物。     

合成方法对Rh/CeO2-ZrO2-La2O3催化剂的结构、表面性能及DeNOx活性的影响

用沉积沉淀法合成两种不同系列的CeO2-ZrO2-La2O3混合氧化物(ZrO2和La2O3沉积CeO2粒子(标记为A-x)以及CeO2和La2O3沉积ZrO2粒子(标记为B-x)),并用作Rh催化剂的载体。XRD、拉曼、TPR、XPS和O2脉冲等表征结果显示出不同的沉积顺序将导致不同的结构和氧化还原性能,且B-x具有更高的氧迁移性、储氧能力和表面Ce浓度。当其负载Rh后,Rh/B-x催化剂具有更高的NO和CO转化率及N2选择性,且Ce的最佳含量为50at%。这可能归因于Rh负载于富铈表面形成更多有利于NO分解的表面Ce3+活性位。     

Flow injection analysis of gallic acid with inhibited electrochemiluminescence detection

A flow injection (FI)–electrochemiluminescent (ECL) method has been developed for the determination of gallic acid, based on an inhibition effect on the Ru(bpy)₃²⁺/tri-n-propylamine (TPrA) ECL system in pH 8.0 phosphate buffer solution. The method is simple and convenient with a determination limit of 9.0×10^–9 mol/L and a dynamic concentration range of 2×10^–8–2×10^–5 mol/L. The relative standard deviation (RSD) was 1.0% for 1.0×10^–6 mol/L gallic acid (n=11). It was successfully applied to the determination of gallic acid in Chinese proprietary medicine—Jianming Yanhou Pian. The inhibition mechanism proposed for the quenching effect of the gallic acid on the Ru(bpy)₃²⁺/TPrA ECL system was the interaction of electrogenerated Ru(bpy)₃^2+* and o-benzoquinone derivative at the electrode surface. The ECL emission spectra and UV-visible absorption spectra were applied to confirm the mechanism.