Synthons for coordinatively unsaturated complexes of tungsten, and their use for the synthesis of high oxidation-state silylene complexes

Reduction of Cp*WCl4 afforded the metalated complex (eta6-C5Me4CH2)(dmpe)W(H)Cl (1) (Cp* = C5Me5, dmpe = 1,2-bis(dimethylphosphino)ethane). Reactions with CO and H(2) suggested that 1 is in equilibrium with the 16-electron species [Cp(dmpe)WCl], and 1 was also shown to react with silanes R2SiH2 (R2 = Ph2 and PhMe) to give the tungsten(IV) silyl complexes Cp*(dmpe)(H)(Cl)W(SiHR2) (6a, R2 = Ph2; 6b, R2 = PhMe). Abstraction of the chloride ligand in 1 with LiB(C6F5)4 gave a reactive species that features a doubly metalated Cp ligand, [(eta7-C5Me3(CH2)2)(dmpe)W(H)2][B(C6F5)4] (4). In its reaction with dinitrogen, 4 behaves as a synthon for the 14-electron fragment [Cp*(dmpe)W]+, to give the dinuclear dinitrogen complex ([Cp*(dmpe)W]2(micro-N2)) [B(C6F5)4]2 (5). Hydrosilanes R2SiH2 (R2 = Ph2, PhMe, Me2, Dipp(H); Dipp = 2,6-diisopropylphenyl) were shown to react with 4 in double Si-H bond activation reactions to give the silylene complexes [Cp*(dmpe)H2W = SiR2][B(C6F5)4] (8a-d). Compounds 8a,b (R2 = Ph2 and PhMe, respectively) were also synthesized by abstraction of the chloride ligands from silyl complexes 6a,b. Dimethylsilylene complex 8c was found to react with chloroalkanes RCl (R = Me, Et) to liberate trialkylchlorosilanes RMe2SiCl. This reaction is discussed in the context of its relevance to the mechanism of the direct synthesis for the industrial production of alkylchlorosilanes.     

Direct comparison of the magnetic and electronic properties of samarocene and ytterbocene terpyridine complexes

A new complex, Cp* 2Sm(tpy) ( 1, where Cp* = C 5Me 5, tpy = 2,2':6',2'-terpyridine) and its one-electron oxidized congener [Cp* 2Sm(tpy)]PF 6 ([ 1] (+)) have been synthesized and characterized with the aim of comparing their electronic and magnetic behavior to the known ytterbium analogues: Cp* 2Yb(tpy) ( 2) and [Cp* 2Yb(tpy)]OTf ([ 2] ( + )). These new samarium complexes have been characterized using single-crystal X-ray diffraction, (1)H NMR spectroscopy, cyclic voltammetry, optical spectroscopy, and bulk magnetic susceptibility measurements. All data for 1 indicate a Sm(III)-tpy* (-)[(4f) (5)-(pi*) (1)] ground-state electronic configuration similar to that found previously for 2 [(4f) (13)-(pi*) (1)]. Structural comparisons reveal that there are no significant changes in the overall geometries associated with the neutral and cationic samarium and ytterbium congeners aside from those anticipated based upon the lanthanide contraction. The redox potentials for the divalent Cp* 2Ln(THF) n precursors ( E 1/2(Sm (2+)) = -2.12 V, E 1/2(Yb (2+)) = -1.48 V) are consistent with established trends, the redox potentials (metal-based reduction and ligand-based oxidation) for 1 are nearly identical to those for 2. The correlation in the optical spectra of 1 and 2 is excellent, as expected for this ligand-radical based electronic structural assignment, but there does appear to be a red-shift ( approximately 400 cm (-1)) in all of the bands of 1 relative to those of 2 that suggests a slightly greater stabilization of the pi* level(s) in the samarium(III) complex compared to that in the ytterbium(III) complex. Similar spectroscopic overlap is observed for the monocationic complexes [ 1] (+) and [ 2] (+). Bulk magnetic susceptibility measurements for 1 reveal significantly different behavior than that of 2 due to differences in the electronic-state structure of the two metal ions. The implications of these differences in magnetic behavior are discussed.     

Cationic hafnium silyl complexes and their enhanced reactivity in sigma-bond metathesis processes with Si-H and C-H bonds

Reaction of the mixed-ring silyl methyl complex CpCp*Hf[Si(SiMe3)3]Me (4) with B(C6F5)3 in bromobenzene-d5 yielded the zwitterionic hafnium silyl complex [CpCpHfSi(SiMe3)3][MeB(C6F5)3] (7), which is stable for at least 12 h in solution. Addition of PhSiH3 to 7 rapidly produced HSi(SiMe3)3, CpCp*HfH(mu-H)B(C6F5)3, and oligomeric silane products. Reactions of CpCp*Hf(SiR3)Me (SiR3 = SitBuPh2, SiHMes2) with B(C6F5)3 rapidly produced HSiR3 in quantitative yield along with unidentified hafnium-containing species. However, reactions of Cp2Hf(SiR3)Me (SiR3 = Si(SiMe3)3 (8), SitBuPh2 (9), SiPh3 (10)) with B(C6F5)3 quantitatively produced the corresponding cationic hafnium silyl complexes 12-14. The complex Cp2Hf(SitBuPh2)(mu-Me)B(C6F5)3 (13) was isolated by crystallization from toluene at -30 degrees C and fully characterized, and its spectroscopic properties and crystal structure are compared to those of its neutral precursor 9. The sigma-bond metathesis reaction of 13 with Mes2SiH2 yielded HSitBuPh2 and the reactive species Cp2Hf(eta(2)-SiHMes2)(mu-Me)B(C6F5)3 (16, benzene-d6), which was also generated by reaction of Cp2Hf(SiMes2H)Me (11) with B(C6F5)3. Spectroscopic data provide evidence for an unusual alpha-agostic Si-H interaction in 16. At room temperature, 16 reacts with benzene to form Cp2Hf(Ph)(mu-Me)B(C6F5)3 (17), and with toluene to give isomers of Cp2Hf(C6H4Me)(mu-Me)B(C6F5)3 (18-20) and Cp2Hf(CH2Ph)(mu-Me)B(C6F5)3 (21). The reaction with benzene is first order in both 16 and benzene. Kinetic data including activation parameters (deltaH = 19(1) kcal/mol; deltaS = -17(3) eu), a large primary isotope effect (kH/kD = 6.9(7)), and the experimentally determined rate law are consistent with a mechanism involving a concerted transition state for C-H bond activation.     

Unprecedented polymerization of epsilon-Caprolactone initiated by a single-site lanthanide borohydride complex, [Sm(eta-C5Me5)2(BH4)(thf)]: mechanistic insights

The monoborohydride lanthanide complex [Sm(Cp*)2(BH4)(thf)] (1a) (Cp* = eta-C5Me5), has been successfully used for the controlled ring-opening polymerization of epsilon-caprolactone (epsilon-CL). The organometallic samarium(III) initiator 1 a produces, in quantitative yields, alpha,omega-dihydroxytelechelic poly(epsilon-caprolactone) displaying relatively narrow polydispersity indices (<1.3) within a short period of time (30 min). The polymers have been characterized by 1H and 13C NMR, SEC, and MALDI-TOF MS analyses. Use of the single-site initiator 1 a allows a better understanding of the polymerization mechanism, in particular with the identification of the intermediate compound [Sm(Cp*)2(BH4)(epsilon-CL)] (1b). Indeed, one molecule of epsilon-CL initially displaces the coordinated THF in 1 a to give 1 b. Then, epsilon-CL opening (through cleavage of the cyclic ester oxygen-acyl bond) and insertion into the Sm--HBH3 bond followed by reduction of the carbonyl function by the BH3 end-group ligand, leads to the samarium alkoxyborane derivative [Sm(Cp*)2[O(CH2)6O(BH2)]] (2). This compound subsequently initiates the polymerization of epsilon-CL through a coordination-insertion mechanism. Finally, upon hydrolysis, alpha,omega-dihydroxypoly(epsilon-caprolactone), HO(CH2)5C(O)[O(CH2)5C(O)]nO(CH2)6OH (4) is recovered. The stereoelectronic contribution of the two Cp* ligands appears to slow down the polymerization and to limit transesterification reactions.     

Catalytic P--H activation by Ti and Zr catalysts

Catalytic dehydrocoupling of phosphines was investigated using the anionic zirconocene trihydride salts [Cp*2Zr(mu-H)3Li]3 (1 a) or [Cp*2Zr(mu-H)3K(thf)4] (1 b), and the metallocycles [CpTi(NPtBu3)(CH2)4] (6) and [Cp*M(NPtBu3)(CH2)4] (M=Ti 20, Zr 21) as catalyst precursors. Dehydrocoupling of primary phosphines RPH2 (R=Ph, C6H2Me3, Cy, C10H7) gave both dehydrocoupled dimers RP(H)P(H)R or cyclic oligophosphines (RP)n (n=4, 5) while reaction of tBu3C6H2PH2 gave the phosphaindoline tBu2(Me2CCH2)C6H2PH 9. Stoichiometric reactions of these catalyst precursors with primary phosphines afforded [Cp*2Zr((PR)2)H][K(thf)4] (R=Ph 2, Cy 3, C6H2Me3 4), [Cp*2Zr((PPh)3)H][K(thf)4] (5), [CpTi(NPtBu3)(PPh)3] (7) and [CpTi(NPtBu3)(mu-PHPh)]2 (8), while reaction of 6 with (C6H2tBu3)PH2 in the presence of PMe3 afforded [CpTi(NPtBu3)(PMe3)(P(C6H2tBu3)] (10). The secondary phosphines Ph2PH and (PhHPCH2)2CH2 also undergo dehydrocoupling affording (Ph2P)2 and (PhPCH2)2CH2. The bisphosphines (CH2PH2)2 and C6H4(PH2)2 are dehydrocoupled to give (PCH2CH2PH)2)(12) and (C6H4P(PH))2 (13) while prolonged reaction of 13 gave (C6H4P2)(8) (14). The analogous bisphosphine Me2C6H4(PH)2 (17) was prepared and dehydrocoupling catalysis afforded (Me2C6H2P(PH))2 (18) and subsequently [(Me2C6H2P2)2(mu-Me2C6H2P2)]2 (19). Stoichiometric reactions with these bisphosphines gave [Cp*2Zr(H)(PH)2C6-H4][Li(thf)4] (22), [CpTi(NPtBu3)(PH)2C6H4]2 (23) and [Cp*Ti(NPtBu3)(PH)2C6H4] (24). Mechanistic implications are discussed.     

Proton-induced lewis acidity of unsaturated iridium amides

Oxidation of Cp*Ir((rac-TsDPEN)H (DPEN = H2NCHPhCHPhNTs) with Cp2FePF6 or Ph3CPF6 in MeCN solution generates [Cp*Ir(TsDPEN)(NCMe)]PF6 ([1H(NCMe)]PF6) together with H2 and Ph3CH, respectively. Labeling studies revealed that the Ir-H was abstracted. The formation of a transient electrophilic species is implicated by the formation of a cyclometalated derivative. The labile species [1H(NCMe)]+ was also obtained by protonation of the diamido derivative Cp*Ir(TsDPEN-H) (1) in MeCN solution (BArF4- = B(C6H3-3,5-(CF3)2)4-). The unsaturated, "naked" cation [1H]BArF4 can be prepared by protonation of 1 with H(OEt2)2BArF4 in CH2Cl2 solution or by thermal elimination of MeCN from [1H(NCMe)]+. Crystallographic analysis confirms the structure of this 16e cation in [1H]BArF4. The formally unsaturated species 1 and [1H]BArF4 have strongly contrasting Lewis acidities, with the cation binding PPh3, CO, and NH3. 1 does not measurably bind these same ligands. [1H]BArF4 is reactive toward H2, at least in the absence of inhibiting donor ligands such as MeCN. [1H]BArF4 (CH2Cl2 solutions) catalyzes the addition of H2 to 1 by proton transfer from an apparent dihydrogen complex. This work demonstrates that the protonation activates the Lewis acidity of unsaturated Ir(III) amides, giving rise to novel organometallic Lewis acids.     

Synthesis and characterization of mono beta-diketiminatosamarium amides and hydrocarbyls

Reaction of SmCl3 with 1 eq of KL (L =[DippNC(Me)CHC(Me)NDipp]; Dipp = 2,6-i-Pr2C6H3) in THF afforded the dimeric samarium dichloride LSmCl2(THF)Cl2SmL (1) in high yield. Reactions of 1 with NaN(SiMe3)2, KNHAr (Ar = 2,4,6-t-Bu3C6H2), KBHEt3, and KCp*(Cp*= C5Me5) yielded various new complexes: LSmClN(SiMe3)2 (2), LSm[N(SiMe3)2]2 (3), LSmNHAr(HBEt3) (4), LSm(NHAr)2 (5), and LSmCp*Cl (6). Reaction of 1 with one eq of NaN(SiMe3)2 followed by treatment with excess AlMe3 afforded a unique bimetallic samarium tetramer Cl3L2Sm2(AlMe4)2Sm2L2Cl3 (7). Reaction of 6 with LiMe or LiCH2SiMe3 afforded LSmCp*Me (8) and LSmCp*CH2SiMe3 (9) in excellent yield. Methyl abstraction from with B(C6F5)3 in toluene yielded the cationic borate species (LSmCp*)[MeB(C6F5)3] (10). Molecular structures of 1-7 and 9 were determined by X-ray single crystal analysis.     

New cationic and zwitterionic Cp*M(kappa2-P,S) complexes (M = Rh, Ir): divergent reactivity pathways arising from alternative modes of ancillary ligand participation in substrate activation

Treatment of 0.5 equiv of [Cp*IrCl(2)](2) with 1/3-P(i)Pr(2)-2-S(t)Bu-indene afforded Cp*Ir(Cl)(kappa(2)-3-P(i)Pr(2)-2-S-indene) (1) in 95% yield (Cp* = eta(5)-C(5)Me(5)). Addition of AgOTf or LiB(C(6)F(5))(4) x 2.5 OEt(2) to 1 gave [Cp*Ir(kappa(2)-3-P(i)Pr(2)-2-S-indene)](+)X(-) ([2](+)X(-); X = OTf, 78%; X = B(C(6)F(5))(4), 82%), which represent the first examples of isolable coordinatively unsaturated [Cp'Ir(kappa(2)-P,S)](+)X(-) complexes. Exposure of [2](+)OTf(-) to CO afforded [2 x CO](+)OTf(-) in 91% yield, while treatment of [2](+)B(C(6)F(5))(4)(-) with PMe(3) generated [2 x PMe(3)](+)B(C(6)F(5))(4)(-) in 94% yield. Treatment of 1 with K(2)CO(3) in CH(3)CN allowed for the isolation of the unusual adduct 3 x CH(3)CN (41% isolated yield), in which the CH(3)CN bridges the Lewis acidic Cp*Ir and Lewis basic indenide fragments of the targeted coordinatively unsaturated zwitterion Cp*Ir(kappa(2)-3-P(i)Pr(2)-2-S-indenide) (3). In contrast to the formation of [2 x CO](+)OTf(-), exposure of 3 x CH(3)CN to CO did not afford 3 x CO; instead, a clean 1:1 mixture of (kappa(2)-3-P(i)Pr(2)-2-S-indene)Ir(CO)(2) (4) and 1,2,3,4-tetramethylfulvene was generated. Treatment of [2](+)OTf(-) with Ph(2)SiH(2) resulted in the net loss of Ph(2)Si(OTf)H to give Cp*Ir(H)(kappa(2)-3-P(i)Pr(2)-2-S-indene) (5) in 44% yield. In contrast, treatment of [2](+)B(C(6)F(5))(4)(-) with Ph(2)SiH(2) or PhSiH(3) proceeded via H-Si addition across Ir-S to give the corresponding [Cp*Ir(H)(kappa(2)-3-P(i)Pr(2)-2-S(SiHPhX)-indene)](+)B(C(6)F(5))(4)(-) complexes 6a (X = Ph, 68%) or 6b (X = H, 77%), which feature a newly established S-Si linkage. Compound 6a was observed to effect net C-O bond cleavage in diethyl ether with net loss of Ph(2)Si(OEt)H, affording [Cp*Ir(H)(kappa(2)-3-P(i)Pr(2)-2-SEt-indene)](+)B(C(6)F(5))(4)(-) (7) in 77% yield. Furthermore, 6a proved capable of transferring Ph(2)SiH(2) to acetophenone, with concomitant regeneration of [2](+)B(C(6)F(5))(4)(-); however, [2](+)X(-) did not prove to be effective ketone hydrosilylation catalysts. Treatment of 1/3-P(i)Pr(2)-2-S(t)Bu-indene with 0.5 equiv of [Cp*RhCl(2)](2) gave Cp*Rh(Cl)(kappa(2)-3-P(i)Pr(2)-2-S-indene) (8) in 94% yield. Combination of 8 and LiB(C(6)F(5))(4) x 2.5 Et(2)O produced the coordinatively unsaturated cation [Cp*Rh(kappa(2)-3-P(i)Pr(2)-2-S-indene)](+)B(C(6)F(5))(4)(-) ([9](+)B(C(6)F(5))(4)(-)), which was transformed into [Cp*Rh(H)(kappa(2)-3-P(i)Pr(2)-2-S(SiHPh(2))-indene)](+)B(C(6)F(5))(4)(-) (10) via net H-Si addition of Ph(2)SiH(2) to Rh-S. Unlike [2](+)X(-), complex [9](+)B(C(6)F(5))(4)(-) was shown to be an effective catalyst for ketone hydrosilylation. Treatment of 3 x CH(3)CN with Ph(2)SiH(2) resulted in the loss of CH(3)CN, along with the formation of Cp*Ir(H)(kappa(2)-3-P(i)Pr(2)-2-S-(1-diphenylsilylindene)) (11) (64% isolated yield) as a mixture of diastereomers. The formation of 11 corresponds to heterolytic H-Si bond activation, involving net addition of H(-) and Ph(2)HSi(+) fragments to Ir and indenide in the unobserved zwitterion 3. Crystallographic data are provided for 1, [2 x CO](+)OTf(-), 3 x CH(3)CN, 7, and 11. Collectively, these results demonstrate the versatility of donor-functionalized indene ancillary ligands in allowing for the selection of divergent metal-ligand cooperativity pathways (simply by ancillary ligand deprotonation) in the activation of small molecule substrates.     

Structure of the decamethyl titanocene cation,a metallocene with two agostic C-h bonds,and its interaction with fluorocarbons

The tetraphenylborate salt of the decamethyl titanocene cation, [Cp*2Ti][BPh4] (1, Cp* = C5Me5), was prepared by reaction of Cp*2TiH with [Cp2Fe][BPh4] and by reaction of Cp*2TiMe with [PhNMe2H][BPh4]. The crystal structure of 1 shows that the Cp*2Ti cation has a bent metallocene structure with agostic interactions with the metal center of two adjacent methyl groups on one of the Cp* ligands. Compound 1 reacts readily with THF to give the adduct [Cp*2Ti(THF)][BPh4] (2). In fluorobenzene, 1 forms the eta1-fluorobenzene adduct [Cp*2Ti(eta1-FC6H5)][BPh4] (3), which was structurally characterized. In contrast to the thermal stability of 3, addition of alpha,alpha,alpha-trifluorotoluene to either 1 or 2 results in C-F activation to give Cp*2TiF2 and PhCF2CF2Ph as the main products. This reactivity toward benzylic C-F bonds is also reflected in the reactivity toward the fluorinated borate anions [B(C6F5)4]- and {B(3,5-(CF3)2C6H3]4}-: reaction of Cp*2TiMe with their [PhNMe2H]+ salts results in a stable complex for the former anion, whereas rapid C-F activation is observed for the latter.     

Silylene extrusion from organosilanes via double geminal Si-H bond activation by a Cp*Ru(kappa2-P,N)+ complex: observation of a key stoichiometric step in the glaser-tilley alkene hydrosilylation mechanism

Treatment of Cp*RuCl(kappa2-P,N-2b) (2b = 2-NMe2-3-PiPr2-indene) with TlSO3CF3 produced the cyclometalated complex [4]+SO3CF3- in 94% isolated yield. Exposure of [4]+X- (X = B(C6F5)4 or SO3CF3) to Ph2SiH2 (10 equiv) or PhSiH3 afforded the corresponding [Cp*(mu-P,N-2b)(H)2Ru=SiRPh]+X- complexes, [5]+X- (R = Ph; X = B(C6F5)4, 82%; X = SO3CF3, 39%) and [6]+X- (R = H; X = B(C6F5)4, 94%; X = SO3CF3, 95%). Notably, these transformations represent the first documented examples of Ru-mediated silylene extrusion via double geminal Si-H bond activation of an organosilane-a key step in the recently proposed Glaser-Tilley (G-T) alkene hydrosilylation mechanism. Treatment of [5]+B(C6F5)4- with KN(SiMe3)2 or [6]+SO3CF3- with NaN(SiMe3)2 afforded the corresponding zwitterionic Cp*(mu-2-NMe2-3-PiPr2-indenide)(H)2Ru=SiRPh complex in 69% (R = Ph, 7) or 86% (R = H, 8) isolated yield. Both [6]+X- and 8 proved unreactive toward 1-hexene and styrene and provided negligible catalytic turnover in the attempted metal-mediated hydrosilylation of these substrates with PhSiH3, thereby providing further empirical evidence for the required intermediacy of base-free Ru=Si species in the G-T mechanism. Isomerization of the P,N-indene ligand backbone in [6]+X-, giving rise to [Cp*(mu-1-PiPr2-2-NMe2-indene)(H)2Ru=SiHPh]+X- ([9]+X-), was observed. In the case of [9]+SO3CF3-, net intramolecular addition of the Ru=Si-H group across the styrene-like C=C unit within the ligand backbone to give 10 (96% isolated yield) was observed. Crystallographic characterization data are provided for [4]+X-, [5]+X-, [6]+X-, 8, and 10.     

Trapping reactions of an intermediate containing a tungsten-phosphorus triple bond with alkynes

The thermolysis of the phosphinidene complex [Cp*P[W(CO)5]2] (1) in toluene in the presence of tBuC(triple bond)CMe leads to the four-membered ring complexes [[[eta2-C(Me)C(tBu)]Cp*(CO)W(mu3-P)[W(CO)3]][eta4:eta1:eta1-P[W(CO)5]WCp*(CO)C(Me)C(tBu)]] (4) as the major product and [[W[Cp*(CO)2]W(CO)2WCp*(CO)[eta1:eta1-C(Me)C(tBu)]](mu,eta3:eta2:eta1-P2[W(CO)5]] (5). The reaction of 1 with PhC(triple bond)CPh leads to [[W(Co)2[eta2-C(Ph)C(Ph)]][(eta4:eta1-P(W(CO)5]W[Cp*(CO)2)C(Ph)C(Ph)]] (6). The products 4 and 6 can be regarded as the formal cycloaddition products of the phosphido complex intermediate [Cp*(CO)2W(triple bond)P --> W(CO)5] (B), formed by Cp* migration within the phosphinidene complex 1. Furthermore, the reaction of 1 with PhC(triple bond)CPh gives the minor product [[[eta2:eta1-C(Ph)C(Ph)]2[W(CO)4]2][mu,eta1:eta1-P[C(Me)[C(Me)]3C(Me)][C(Ph)](C(Ph)]] (7) as a result of a 1,3-dipolaric cycloaddition of the alkyne into a phosphaallylic subunit of the Cp*P moiety of 1. Compounds 4-7 have been characterized by means of their spectroscopic data as well as by single-crystal X-ray structure analysis.     

Reactivity of a coordinatively unsaturated Cp*Ru(kappa2-P,O) complex

Whereas a new coordinatively unsaturated Cp*Ru(kappa(2)-P,O) complex (1a) forms adducts with two-electron donors (including sigma-H(2) and mu-N(2) ligands), double Si-H bond activation is observed upon treatment with Ph(2)SiH(2) or PhSiH(3), leading to the clean formation of products corresponding to the net insertion of a Ph(2)Si: or Ph(H)Si: fragment into the Ru-O bond of 1a.     

Divalent dirhodium imido complexes: formation, structure, and alkyne cycloaddition reactivity

Dirhodium amido complexes [(Cp*Rh)2(mu2-NHPh)(mu2-X)] (X = NHPh (2), Cl (3), OMe (4); Cp* = eta5-C5Me5) were prepared by chloride displacement of [Cp*Rh(mu2-Cl)]2 (1) and have been used as precursors to a dirhodium imido species [Cp*Rh(mu2-NPh)RhCp*]. The imido species can be trapped by PMe3 to give the adduct [Cp*Rh(mu2-NPh)Rh(PMe3)Cp*] (5) and undergoes a formal [2 + 2] cycloaddition reaction with unactivated alkynes to give the azametallacycles [Cp*Rh(mu2-eta2:eta3-R1CCR2NPh)RhCp*] (R1 = R2 = Ph (6a), R1 = H, R2 = t-Bu (6b), R1 = H, R2 = p-tol (6c)). Isolation of a relevant unsaturated imido complex [Cp*Rh(mu2-NAr)RhCp*] (7) was achieved by the use of a sterically hindered LiNHAr (Ar = 2,6-diisopropylphenyl) reagent in a metathesis reaction with 1. X-ray structures of 2, 6a, 7 and the terminal isocyanide adduct [Cp*Rh(mu2-NAr)Rh(t-BuNC)Cp*] (8) are reported.     

Structures and reactivity of Zr(IV) chlorobenzene complexes

The synthesis, structures, and unusual reactivity of (C5R5)2ZrR'(ClPh)+ chlorobenzene complexes are described. The reaction of (C5R5)2ZrR'2 with [Ph3C][B(C6F5)4] in C6D5Cl affords [(C5R5)2ZrR'(ClC6D5)][B(C6F5)4] chlorobenzene complexes (1-d5, R' = CH2Ph and (C5R5)2 = (C5H5)2; 2a-d-d5, R' = Me and (C5R5)2 = rac-(1,2-ethylene(bis)indenyl) (2a), (C5H5)2 (2b), (C5H4Me)2 (2c), (C5Me5)2 (2d, C5Me5 = Cp*)). Complexes 1 and 2b,c are thermally robust but are converted to [{(C5R5)2Zr(mu-Cl)}2][B(C6F5)4]2 (4b,c) by a photochemical process in ClPh solution. In contrast, 2d undergoes facile thermal ortho-C-H activation to yield [Cp*2Zr(eta2-C,Cl-2-Cl-C6H4)][B(C6F5)4] (5), which slowly rearranges to [(eta4,eta1-C5Me5C6H4)Cp*ZrCl][B(C6F5)4] (6) via beta-Cl elimination and benzyne insertion into a Zr-CCp* bond. The higher thermal reactivity of 2d versus that of 1 and 2b,c is attributed to steric crowding associated with the Cp* ligands of 2d, which forces a ClPh ortho-hydrogen close to the Zr-Me group.     

Fine-tuning of metallaborane geometries: chemistry of iridaboranes derived from the reaction of

From reaction of [(Cp*Ir)2HxCl(4-x)] (x=1, 0) and LiBH4, arachno-[[Cp*IrH2]B3H7](1) is produced in moderate yield concurrently with [Cp*IrH4]. In contrast, reaction of [(Cp*Ir)2H2Cl2] with LiBH4 results in arachno-[[Cp*IrH]2(mu-H)B2H5] (3) in high yield at room temperature but a mixture of 1 and [[Cp*IrH]2(mu-H)BH4] (2) at 0 degrees C. BH3 x THF converts 1 to arachno-[(Cp*IrHB4H9] (4) and 2 to 3 with 1 as a minor product. Further, reaction of 3 with excess of BH3 x THF results in formation of nido-[[Cp*Ir]2-(mu-H)B4H7] (6) formed by loss of H2 from the intermediate arachno-[[Cp*IrH]2B4H8] (5). Reaction of 1 with [Co2(CO)8] permits the isolation of two metallaboranes, arachno-[[Cp*Ir(CO)]-B3H7] (7) and nido-[1-[Cp*Ir]-2,3-Co2-(CO)4(mu-CO)B3H7] (8). Treatment of 4 with [Co2(CO)8] gives only one single mixed-metal metallaborane nido-[1-[Cp*Ir]-2-Co(CO)3B4H7 (9) in high yield. Finally, pyrolysis of 8 results in loss of hydrogen and formation of pileo-[1-[Cp*Ir]-2,3-Co2(CO)5B3H5] (10) with a BH-capped square-pyramidal structure. With kinetic control rational synthesis of a variety metallaboranes has been achieved by varying the number of chlorides in the monocyclopentadienylmetal halide dimer, reaction temperature, types of monoborane, and metal fragment sources.     

Half-sandwich bis(tetramethylaluminate) complexes of the rare-earth metals: synthesis, structural chemistry, and performance in isoprene polymerization

The protonolysis reaction of [Ln(AlMe(4))(3)] with various substituted cyclopentadienyl derivatives HCp(R) gives access to a series of half-sandwich complexes [Ln(AlMe(4))(2)(Cp(R))]. Whereas bis(tetramethylaluminate) complexes with [1,3-(Me(3)Si)(2)C(5)H(3)] and [C(5)Me(4)SiMe(3)] ancillary ligands form easily at ambient temperature for the entire Ln(III) cation size range (Ln=Lu, Y, Sm, Nd, La), exchange with the less reactive [1,2,4-(Me(3)C)(3)C(5)H(3)] was only obtained at elevated temperatures and for the larger metal centers Sm, Nd, and La. X-ray structure analyses of seven representative complexes of the type [Ln(AlMe(4))(2)(Cp(R))] reveal a similar distinct [AlMe(4)] coordination (one eta(2), one bent eta(2)). Treatment with Me(2)AlCl leads to [AlMe(4)] --> [Cl] exchange and, depending on the Al/Ln ratio and the Cp(R) ligand, varying amounts of partially and fully exchanged products [{Ln(AlMe(4))(mu-Cl)(Cp(R))}(2)] and [{Ln(mu-Cl)(2)(Cp(R))}(n)], respectively, have been identified. Complexes [{Y(AlMe(4))(mu-Cl)(C(5)Me(4)SiMe(3))}(2)] and [{Nd(AlMe(4))(mu-Cl){1,2,4-(Me(3)C)(3)C(5)H(2)}}(2)] have been characterized by X-ray structure analysis. All of the chlorinated half-sandwich complexes are inactive in isoprene polymerization. However, activation of the complexes [Ln(AlMe(4))(2)(Cp(R))] with boron-containing cocatalysts, such as [Ph(3)C][B(C(6)F(5))(4)], [PhNMe(2)H][B(C(6)F(5))(4)], or B(C(6)F(5))(3), produces initiators for the fabrication of trans-1,4-polyisoprene. The choice of rare-earth metal cation size, Cp(R) ancillary ligand, and type of boron cocatalyst crucially affects the polymerization performance, including activity, catalyst efficiency, living character, and polymer stereoregularity. The highest stereoselectivities were observed for the precatalyst/cocatalyst systems [La(AlMe(4))(2)(C(5)Me(4)SiMe(3))]/B(C(6)F(5))(3) (trans-1,4 content: 95.6 %, M(w)/M(n)=1.26) and [La(AlMe(4))(2)(C(5)Me(5))]/B(C(6)F(5))(3) (trans-1,4 content: 99.5 %, M(w)/M(n)=1.18).     

Synthesis and reactivities of a bis(cyanamido)-capped triruthenium complex

The tetraruthenium complex [Cp*RuCl]4 (Cp* = eta(5)-C(5)Me(5)) reacts with Na(2)NCN to afford the anionic bis(cyanamido)-capped triruthenium complex [(Cp*Ru)3(micro(3)-NCN)(2)]- ((2-)), which undergoes single electron oxidation to form [(Cp*Ru)3(micro(3)-NCN)2] upon workup with 1 equiv. of [Cp(2)Fe](PF(6)) (Cp = eta(5)-C(5)H(5)). Treatment of (2-) with 1 equiv. of HCl at room temperature leads to the protonation of one of the Ru-Ru edges to give the hydrido-bridged complex [(Cp*Ru)3(micro-H)(micro-NCN)2], while the cationic side-on NCNH(2) complex [(Cp*Ru)3(micro-Cl)(micro(3)-NCN)(micro(3)-NCNH(2)-1kappaC,N:2kappaC:3kappaN)]Cl (5) is obtained by the reaction of (2-) with an excess amount of HCl at -78 degrees C. On the other hand, the reaction of (2-) with BR(3) (R = Et, Ph) results in the ligation of two BR(3) molecules to the terminal nitrogen atoms of the cyanamido ligands to yield the bis(borane) adduct (PPN)[(Cp*Ru)(3){(micro(4)-NCN)(BR(3))}(2)] (6, PPN = Ph(3)PNPPPh(3)). 6b (R = Et) slowly liberates one BEt(3) molecule in acetone to give the mono(borane) adduct (PPN)[(Cp*Ru)3(micro(3)-NCN){(micro(4)-NCN)(BEt(3))}] (7). (2-) is also shown to react with [AuCl(PPh(3))] or PhCOCl to afford the tetranuclear heterometallic complex [(Cp*Ru)3(micro(3)-NCN){(micro(4)-NCN)(AuPPh(3))}] (8) or the benzoylcyanamido complex [(Cp*Ru)3(micro(3)-NCN)(micro(3)-NCNCOPh)] in which the Au(PPh(3))+ or benzoyl fragment is bound to the terminal nitrogen atom of a cyanamido ligand. The molecular structures of PPN+(2-), 5.C(6)H(6), 7 and 8.C(6)H(6) have been determined by single-crystal X-ray analyses.     

一些含半夹心结构ⅥB族金属的1,1’-二硫(硒)二茂铁化合物的合成

CpCr(NO)(CO)_2与Fe(C_5H_4S)_2S反应,形成氧化-还原产物CpCr(NO)(SC_5H_4)_2Fe(1)。双杂核二茂铁化合物CpM(NO)(EC_5H_4)_2Fe[M=Mo,E=S(2a),Se(2b);M=W,E=S(4a),Se(4b)]、CpMo(NO)(SC_5H_4)_2Fe(3)、Cp_2Mo(SeC_5H_4)_2Fe(6)和Cp_2W(SC_5H_4)_2Fe(7)可通过Fe(C_5H_4ELi)_2·2THF(E=S,Se)与CpM(NO)I_2(M=Mo,W)、[CpMo(NO)I_2]_2或Cp_2MCl_2(M=Mo,W)反应制得。三核杂原子二茂铁化合物[CpCr(NO)_2]_2(EC_5H_4)_2Fe[E=S(8a),Se(8b)],由Fe(C_5H_4ELi)_2·2THF(E=S,Se)与二倍摩尔量的CpCr(NO)_2I反应制备。通过AgBF_4氧化2a得到二茂铁离子型化合物[CpMo(NO)(SC_5H_4)_2Fe]~ BF_4~-(5)。采用元素分析、红外光谱、~1H和~(13)C NMR谱以及EI-MS表征了所合成的新型化合物。     

Unerwartete Reduktion von [Cp*TaCl4(PH2R)] (R = But,Cy, Ad,Ph, 2,4,6‐Me3C6H2; Cp* = C5Me5) durch Reaktion mit DBU – Molekülstruktur von [(DBU)H][Cp*TaCl4] (DBU = 1,8‐Diazabicyclo[5.4.0]undec‐7‐en)

Unexpected Reduction of [Cp*TaCl₄(PH₂R)] (R = Bu^t, Cy, Ad, Ph, 2,4,6‐Me₃C₆H₂; Cp* = C₅Me₅) by Reaction with DBU – Molecular Structure of [(DBU)H][Cp*TaCl₄] (DBU = 1,8‐diazabicyclo[5.4.0]undec‐7‐ene) [Cp*TaCl₄(PH₂R)] (R = Bu^t, Cy, Ad, Ph, 2,4,6‐Me₃C₆H₂ (Mes); Cp* = C₅Me₅) react with DBU in an internal redox reaction with formation of [(DBU)H][Cp*TaCl₄] ( 1 ) (DBU = 1,8‐diazabicyclo[5.4.0]undec‐7‐ene) and the corresponding diphosphane (P₂H₂R₂) or decomposition products thereof. 1 was characterised spectroscopically and by crystal structure determination. In the solid state, hydrogen bonding between the (DBU)H cation and one chloro ligand of the anion is observed.     

Mixed-ligand uranyl(V) beta-diketiminate/beta-diketonate complexes: synthesis and characterization

The reaction of [UO 2(Ar 2nacnac)Cl] 2 [Ar 2nacnac = (2,6- (i)Pr 2C 6H 3)NC(Me)CHC(Me)N(2,6- (i)Pr 2C 6H 3)] with Na(RC(O)CHC(O)R) (R = Me, Ph, CF 3) in tetrahydrofuran results in the formation of UO 2(Ar 2nacnac)(RC(O)CHC(O)R) (R = Me, 1; Ph, 2; CF 3, 3), which can be isolated in moderate yields. The structures of 1 and 2 have been confirmed by X-ray crystallography, while the solution redox properties of 1- 3 have been measured by cyclic voltammetry. Complexes 1- 3 exhibit reduction features at -1.82, -1.59, and -1.39 V (vs Fc/Fc (+)), respectively, at a scan rate of 100 mV.s (-1). The decrease in the reduction potential follows the electron-withdrawing ability of each beta-diketonate ligand. Chemical reduction of 1 and 2 with Cp* 2Co in toluene yields [Cp* 2Co][UO 2(Ar 2nacnac)(RC(O)CHC(O)R)] (R = Me, 4; Ph, 5), while reduction of 3 with Cp 2Co provides [Cp 2Co][UO 2(Ar 2nacnac)(CF 3C(O)CHC(O)CF 3)] ( 6). Complexes 4- 6 have been fully characterized, while the solid-state molecular structure of 5 has also been determined. In contrast to the clean reduction that occurs with Cp* 2Co, reduction of 1 with sodium ribbon, followed by cation exchange with [NEt 4]Cl, produces [NEt 4][UO 2(Ar 2nacnac)(H 2CC(O)CH(O)CMe)] ( 7) in modest yield. This product results from the formal loss of H (*) from a methyl group of the acetylacetonate ligand. Alternately, complex 7 can be synthesized by deprotonation of 1 with NaNTMS 2 in good yield.