An exact solution of boundary layer flow over a moving surface embedded into a nanofluid in the presence of magnetic field and suction/injection

The effects of magnetic field, suction/injection, nanoparticles type, and nanoparticle volume fraction on heat transfer characteristics and mechanical properties of a moving surface embedded into cooling medium consists of water with Cu, Ag or Al₂O₃ particles are studied. The governing boundary layer equations are transformed to ordinary differential equations containing, suction/injection parameter, magnetic parameter, nanoparticle and volume fraction. These equations are solved analytically. The velocity and temperature profiles within the boundary layer are plotted and discussed in details for various values of the different parameters.     

Unsteady MHD Flow on a Rotating Cone in a Rotating Fluid

Unsteady flow over an infinite permeable rotating cone in a rotating fluid in the presence of an applied magnetic field has been investigated. The unsteadiness is induced by the time-dependent angular velocity of the body, as well as that of the fluid. The partial differential equations governing the flow have been solved numerically by using an implicit finite-difference scheme in combination with the quasi-linearization technique. For large values of the magnetic parameter, analytical solutions have also been obtained for the steady-state case. It is observed that the magnetic field, surface velocity, and suction and injection strongly affect the local skin friction coefficients in the tangential and azimuthal directions. The local skin friction coefficients increase when the angular velocity of the fluid or body increases with time, but these decrease with decreasing angular velocity. The skin friction coefficients in the tangential and azimuthal directions vanish when the angular velocities of fluid and the body are equal but this does not imply separation. When the angular velocity of the fluid is greater than that of the body, the velocity profiles reach their asymptotic values at the edge of the boundary layer in an oscillatory manner, but the magnetic field or suction reduces or suppresses these oscillations.     

Hydromagnetic flow of a dusty fluid over a stretching sheet

Analysis of hydromagnetic flow of a dusty fluid over a stretching sheet is carried out with a view to throw adequate light on the effects of fluid-particle interaction, particle loading, and suction on the flow characteristics. The equations of motion are reduced to coupled non-linear ordinary differential equations by similarity transformations. These coupled non-linear ordinary differential equations are solved numerically on an IBM 4381 with double precession, using a variable order, variable step-size finite-difference method. The numerical solutions are compared with their approximate solutions, obtained by a perturbation technique. For small values of β the exact (numerical) solution is in close agreement with that of the analytical (approximate) solution. It is observed that, even in the presence of a transverse magnetic field and suction, the transverse velocity of both the fluid and particle G phases decreases with an increase in the fluid-particle interaction parameter, β, or the particle-loading parameter, k. Moreover, the particle density is maximum at the surface of the stretching sheet, and the shearing stress increases with an increase in β or k.     

Radiation effect on forced convective flow and heat transfer over a porous plate in a porous medium

Heat transfer analysis has been presented for the boundary layer forced convective flow of an incompressible fluid past a plate embedded in a porous medium. The similarity solutions for the problem are obtained and the reduced nonlinear ordinary differential equations are solved numerically. In case of porous plate, fluid velocity increases for increasing values of suction parameter whereas due to injection, fluid velocity is noticed to decrease. The non-dimensional temperature increases with the increasing values of injection parameter. A novel result of this investigation is that the flow separation occurred due to suction/injection may be controlled by increasing the permeability parameter of the medium. The effect of thermal radiation on temperature field is also analyzed.     

Dual solutions of time-dependent magnetohydrodynamic stagnation point boundary layer micropolar nanofluid flow over shrinking/stretching surface

Time-dependent, two-dimensional(2 D) magnetohydrodynamic(MHD)micropolar nanomaterial flow over a shrinking/stretching surface near the stagnant point is considered. Mass and heat transfer characteristics are incorporated in the problem. A model of the partial differential expressions is altered into the forms of the ordinary differential equations via similarity transformations. The obtained equations are numerically solved by a shooting scheme in the MAPLE software. Dual solutions are observed at different values of the specified physical parameters. The stability of first and second solutions is examined through the stability analysis process. This analysis interprets that the first solution is stabilized and physically feasible while the second one is un-stable and not feasible. Furthermore, the natures of various physical factors on the drag force, skin-friction factor, and rate of mass and heat transfer are determined and interpreted. The micropolar nanofluid velocity declines with a rise in the suction and magnetic parameters, whereas it increases by increasing the unsteadiness parameter.The temperature of the micropolar nanofluid rises with increase in the Brownian motion,radiation, thermophoresis, unsteady and magnetic parameters, but it decreases against an increment in the thermal slip constraint and Prandtl number. The concentration of nanoparticles reduces against the augmented Schmidt number and Brownian movement values but rises for incremented thermophoresis parameter values.     

Effects of thermal radiation and variable fluid viscosity on stagnation point flow past a porous stretching sheet

Similarity analysis is performed to investigate the structure of the boundary layer stagnation-point flow and heat transfer over a stretching sheet subject to suction. Fluid viscosity is assumed to vary as a linear function of temperature. Thermal radiation term is considered in the energy equation. The symmetry groups admitted by the corresponding boundary value problem are obtained by using a special form of Lie group transformations viz. scaling group of transformations. With the help of them the partial differential equations corresponding to momentum and energy equations are transformed into highly non-linear ordinary differential equations. Numerical solutions of these equations are obtained by shooting method. It is found that the horizontal velocity increases with the increasing values of the ratio of the free stream velocity to the stretching velocity. Velocity increases with the increasing temperature dependent fluid viscosity parameter when the free-stream velocity is less than the stretching velocity but opposite behavior is noted when the free-stream velocity is greater than the stretching velocity. Due to suction, fluid velocity decreases at a particular point of the surface. Temperature at a point of the surface is found to decrease with increasing thermal radiation.     

Laminar boundary layer flow of a nanofluid along a wedge in the presence of suction/injection

The behavior of an incompressible laminar boundary layer flow over a wedge in a nanofluid with suction or injection has been investigated. The model used for the nanofluid integrates the effects of the Brownian motion and thermophoresis parameters. The governing partial differential equations of this problem, subjected to their boundary conditions, are solved by the Runge-Kutta-Gill technique with the shooting method for finding the skin friction and the rate of heat and mass transfer. The result are presented in the form of velocity, temperature, and volume fraction profiles for different values of the suction/injection parameter, Brownian motion parameter, thermophoresis parameter, pressure gradient parameter, Prandtl number, and Lewis number. The conclusion is drawn that these parameters significantly affect the temperature and volume fraction profiles, but their influence on the velocity profile is comparatively smaller.     

Forced convective flow and heat transfer over a?porous plate in a?Darcy-Forchheimer porous medium in presence of?radiation

A mathematical model is presented for analyzing the boundary layer forced convective flow and heat transfer of an incompressible fluid past a plate embedded in a Darcy-Forchheimer porous medium. Thermal radiation term is considered in the energy equation. The similarity solutions for the problem are obtained and the reduced nonlinear ordinary differential equations are solved numerically. It is noticed that the boundary layer decreases with an increase in the value of inertial parameter and in this case the temperature profile is found to decrease smoothly within the boundary layer. In case of porous plate, fluid velocity increases whereas non-dimensional temperature decreases for increasing values of suction parameter. The rate of heat transfer increases with the increasing values of Prandtl number. The effect of thermal radiation on temperature field is also analyzed.     

Unsteady MHD natural convection from a heated vertical porous plate in a micropolar fluid with Joule heating,chemical reaction and radiation effects

The effects of Joule-heating, chemical reaction and thermal radiation on unsteady MHD natural convection from a heated vertical porous plate in a micropolar fluid are analyzed. The partial differential equations governing the flow and heat and mass transfer have been solved numerically using an implicit finite-difference scheme. The case corresponding to vanishing of the anti-symmetric part of the stress tensor that represents weak concentrations is considered. The numerical results are validated by favorable comparisons with previously published results. A parametric study of the governing parameters, namely the magnetic field parameter, suction/injection parameter, radiation parameter, chemical reaction parameter, vortex viscosity parameter and the Eckert number on the linear velocity, angular velocity, temperature and the concentration profiles as well as the skin friction coefficient, wall couple stress coefficient, Nusselt number and the Sherwood number is conducted. A selected set of numerical results is presented graphically and discussed.     

Effects of slip and heat transfer analysis of flow over an unsteady stretching surface

In this paper, viscous flow and heat transfer over an unsteady stretching surface is investigated with slip conditions. A system of non-linear partial differential equations is derived and transformed to ordinary differential equations with help of similarity transformations. Numerical computations are carried out for different values of the parameters involved and the analysis of the results obtained shows that the flow field is influenced appreciably by the unsteadiness, and the velocity slip parameter. With increasing values of the unsteadiness parameter, fluid velocity and the temperature are found to decrease in both the presence and absence of slip at the boundary. Fluid velocity decreases due to increasing values of the velocity slip parameter resulting in an increase in the temperature field. Skin-friction decreases with the velocity slip parameter whereas it increases with unsteadiness parameter. The rate of heat transfer decreases with the velocity slip parameter while increases with unsteadiness parameter. Same feature is also noticed for thermal slip parameter.     

Combined heat and mass transfer by mixed convection MHD flow along a porous plate with chemical reaction in presence of heat source

An exact and a numerical solutions to the problem of a steady mixed convective MHD flow of an incompressible viscous electrically conducting fluid past an infinite vertical porous plate with combined heat and mass transfer are presented.A uniform magnetic field is assumed to be applied transversely to the direction of the flow with the consideration of the induced magnetic field with viscous and magnetic dissipations of energy.The porous plate is subjected to a constant suction velocity as well as a uniform mixed stream velocity.The governing equations are solved by the perturbation technique and a numerical method.The analytical expressions for the velocity field,the temperature field,the induced magnetic field,the skin-friction,and the rate of heat transfer at the plate are obtained.The numerical results are demonstrated graphically for various values of the parameters involved in the problem.The effects of the Hartmann number,the chemical reaction parameter,the magnetic Prandtl number,and the other parameters involved in the velocity field,the temperature field,the concentration field,and the induced magnetic field from the plate to the fluid are discussed.An increase in the heat source/sink or the Eckert number is found to strongly enhance the fluid velocity values.The induced magnetic field along the x-direction increases with the increase in the Hartmann number,the magnetic Prandtl number,the heat source/sink,and the viscous dissipation.It is found that the flow velocity,the fluid temperature,and the induced magnetic field decrease with the increase in the destructive chemical reaction.Applications of the study arise in the thermal plasma reactor modelling,the electromagnetic induction,the magnetohydrodynamic transport phenomena in chromatographic systems,and the magnetic field control of materials processing.     

MHD flow of power-law fluid on moving surface with power-law velocity and special injection/blowing

The problem of magnetohydrodynamic （MHD） flow on a moving surface with the power-law velocity and special injection/blowing is investigated. A scaling group transformation is used to reduce the governing equations to a system of ordinary differen- tial equations. The skin friction coefficients of the MHD boundary layer flow are derived, and the approximate solutions of the flow characteristics are obtained with the homotopy analysis method （HAM）. The approximate solutions are easily computed by use of a high order iterative procedure, and the effects of the power-law index, the magnetic parameter, and the special suction/blowing parameter on the dynamics are analyzed. The obtained results are compared with the numerical results published in the literature, verifying the reliability of the approximate solutions.     

Melting heat transfer in an axisymmetric stagnation-point flow of the Jeffrey fluid

This investigation explores the characteristics of melting heat transfer in a boundary layer flow of the Jeffrey fluid near the stagnation point on a stretching sheet subject to an applied magnetic field. The governing boundary layer equations are transformed to ordinary differential equations by similarity transformations. Resulting nonlinear problems are solved analytically by the homotopy analysis method. It is noticed that an increase in the melting parameter decreases the dimensionless velocity and temperature, while an increase in the Deborah number increases the velocity and momentum boundary layer thickness.     

Unsteady three-dimensional boundary layer flow due to a permeable shrinking sheet

The unsteady viscous flow over a continuously permeable shrinking surface is studied. Similarity equations are obtained through the application of similar transformation techniques. Numerical techniques are used to solve the similarity equations for different values of the unsteadiness parameter, the mass suction parameter, the shrinking parameter and the Prandtl number on the velocity and temperature profiles as well as the skin friction coefficient and the Nusselt number. It is found that, different from an unsteady stretching sheet, dual solutions exist in a certain range of mass suction and unsteadiness parameters.     

Unsteady free convection flow over an infinite vertical porous plate due to the combined effects of thermal and mass diffusion,magnetic field and Hall currents

The unsteady free convection flow over an infinite vertical porous plate, which moves with time-dependent velocity in an ambient fluid, has been studied. The effects of the magnetic field and Hall current are included in the analysis. The buoyancy forces arise due to both the thermal and mass diffusion. The partial differential equations governing the flow have been solved numerically using both the implicit finite difference scheme and the difference-differential method. For the steady case, analytical solutions have also been obtained. The effect of time variation on the skin friction, heat transfer and mass transfer is very significant. Suction increases the skin friction coefficient in the primary flow, and also the Nusselt and Sherwood numbers, but the skin friction coefficient in the secondary flow is reduced. The effect of injection is opposite to that of suction. The buoyancy force, injection and the Hall parameter induce an overshoot in the velocity profiles in the primary flow which changes the velocity gradient from a negative to a positive value, but the magnetic field and suction reduce this velocity overshoot.     

Mixed convection boundary layer flow past a wedge with permeable walls

The effects of suction/injection on steady laminar mixed convection boundary layer flow over a permeable horizontal surface of a wedge in a viscous and incompressible fluid is considered in this paper. The similarity solutions of the governing boundary layer equations are obtained for some values of the suction/injection parameter f ₀, the constant exponent m of the wall temperature as well as the mixed convection parameter λ. The resulting system of nonlinear ordinary differential equations is solved numerically for both assisting and opposing flow regimes using an implicit finite-difference scheme known as the Keller-box method. Numerical results for the reduced skin friction coefficient, the local Nusselt number, and the velocity and temperature profiles are obtained for various values of parameters considered. Dual solutions are found to exist for the case of opposing flow.     

Local non-similarity solution to impact of chemical reaction on MHD mixed convection heat and mass transfer flow over porous wedge in the presence of suction / injection

Combined heat and mass transfer on free, forced, and mixed convection flow along a porous wedge with magnetic effect in the presence of chemical reaction is investigated. The flow field characteristics are analyzed by the Runge-Kutta-Gill scheme with the shooting method as well as the local non-similarity method up to the third level of truncation, which are used to reduce the governing partial differential equations into nine ordinary differential equations. The governing boundary layer equations are converted to a dimensionless form by Falkner-Skan transformations. Because of the effect of suction/injection on the wall of the wedge with buoyancy force and variable wall temperature, the flow field is locally non-similar. Numerical calculations up to the third order level of truncation are carried out as a special case for different values of dimensionless parameters. Effects of the magnetic field strength in the presence of chemical reaction with variable wall temperature and concentration on the dimensionless velocity, temperature and concentration profiles are shown graphically.     

A novel analytic solution of MHD flow for two classes of visco-elastic fluid over a sheet stretched with non-linearly (quadratic) velocity

The laminar boundary layer flow induced in a quiescent visco-elastic fluid by a permeable stretched flat surface with non-linearly (quadratic) velocity and appropriate wall transpiration under the influence of a magnetic field is investigated. It is shown that the problem permits a complete analytic exponentially decaying solution for the set of continuity and momentum equations with both magnetic field and visco-elasticity influences for two classes of visco-elastic fluid, namely, the second grade and Walters’ liquid B fluids. The effects on both the skin friction parameter α and velocity profiles of various physical parameters such as visco-elasticity, suction/blowing parameter and magnetic parameter are studied. The results for the velocity field are presented through graphs and discussed in detail.     

Nonsimilar boundary-layer flow over a stationary permeable plate in a rotating fluid with a magnetic field

Summary  The nonsimilar boundary-layer flow and heat transfer over a stationary permeable surface in a rotating fluid in the presence of magnetic field, mass transfer and free stream velocity are studied. The parabolic partial differential equations governing the flow have been solved numerically by using a difference–differential method. For small streamwise distance, these partial differential equations are also solved by a perturbation technique with Shanks transformation. For uniform mass transfer, analytical solutions are obtained. The surface skin friction coefficients and the Nusselt number increase with the magnetic field, suction and streamwise distance from the leading edge of the plate except the skin friction coefficient in the y-direction which decreases with the increasing magnetic field. Received 4 December 2001; accepted for publication 24 September 2002     

MHD stagnation point flow of a micropolar fluid towards a moving surface with radiation

The effects of magnetic field and thermal radiation on a micropolar fluid flow near a stagnation point towards a moving surface are investigated. Numerical solutions for the transformed non-linear ordinary differential equations are obtained using the fourth order Rung-Kutta integration scheme coupled with the shooting method. The effects of the magnetic parameter, the material parameter, the radiation parameter and the Prandtl number on the velocity, angular velocity and temperature profiles are displayed graphically and investigated. Also the numerical values of the local skin-friction coefficient and the Nusselt number for various values of the physical parameters are entered in tabular form and discussed.