Mercury adsorption on gold surfaces employed in the sampling and determination of vaporous mercury: a scanning tunneling microscopy study

To clarify the mechanism of mercury adsorption on gold surfaces thin epitaxial gold films have been exposed to trace amounts of gaseous mercury under laboratory conditions for different periods of time. The changes in the surface morphology of the thin films caused by the exposure have been studied by scanning tunneling microscopy (STM). The evolution of the surface structures with time has been also investigated, in the course of a few days after the exposure. The adsorption of mercury on the gold surfaces has caused drastic changes in the morphology of the surfaces. Pits and islands of 2 to 30 nm in diameter have appeared on the surface, their size and density per unit area depending on the amount of exposure to mercury. The formation of pits and islands followed a certain path of events.     

Mercury adsorption on gold surfaces employed in the sampling and determination of vaporous mercury: a scanning tunneling microscopy study

To clarify the mechanism of mercury adsorption on gold surfaces thin epitaxial gold films have been exposed to trace amounts of gaseous mercury under laboratory conditions for different periods of time. The changes in the surface morphology of the thin films caused by the exposure have been studied by scanning tunneling microscopy (STM). The evolution of the surface structures with time has been also investigated, in the course of a few days after the exposure. The adsorption of mercury on the gold surfaces has caused drastic changes in the morphology of the surfaces. Pits and islands of 2 to 30 nm in diameter have appeared on the surface, their size and density per unit area depending on the amount of exposure to mercury. The formation of pits and islands followed a certain path of events.     

Aggregation of photolytic gold nanoparticles at the surface of chitosan films

Formation and aggregation of photolytic gold nanoparticles at the surface of chitosan (CTO) films have been investigated. When thin films of chloroauric acid salt of CTO were irradiated with UV light in wet air at room temperature for 10 min, gold nanoparticles of approximately 10 nm size are formed at the film surface. Detailed X-ray photoelectron spectroscopy (XPS) study and field emission type scanning electron microscopy (FE-SEM) observation have been carried out to characterize gold nanoparticles at the film surface. The shift of Au(4f) peak to the higher energy side and broadening of full width at half-maximum in the XPS spectrum are the direct evidence of the existence of gold atoms and small clusters in the early stage of photolysis. According to FE-SEM observation, growth in the particle diameter and aggregation of nanoparticles were observed after prolonged irradiation, and, finally, the film surface was densely covered with gold particles of 20-100-nm size. Gold atoms and clusters could move in the film and precipitate to the irradiated surface. Chemical composition analysis further suggests that gold particles at the surface are covered with an ultrathin CTO layer, which is partly oxidized by oxygen and chlorinated by chlorine during photochemical reactions.     

Electroless gold island thin films: photoluminescence and thermal transformation to nanoparticle ensembles

Electroless gold island thin films are formed by galvanic replacement of silver reduced onto a tin-sensitized silica surface. A novel approach to create nanoparticle ensembles with tunable particle dimensions, densities, and distributions by thermal transformation of these electroless gold island thin films is presented. Deposition time is adjusted to produce monomodal ensembles of nanoparticles from 9.5 +/- 4.0 to 266 +/- 22 nm at densities from 2.6 x 1011 to 4.3 x 108 particles cm-2. Scanning electron microscopy and atomic force microscopy reveal electroless gold island film structures as well as nanoparticle dimensions, densities, and distributions obtained by watershed analysis. Transmission UV-vis spectroscopy reveals photoluminescent features that suggest ultrathin EL films may be smoother than sputtered Au films. X-ray diffraction shows Au films have predominantly (111) orientation.     

Layer-by-layer self-assembly preparation of layered double hydroxide/polyelectrolyte nanofilms monitored by surface plasmon resonance spectroscopy

Layer-by-layer self-assembly was used to prepare nanofilms of (2:1) MgAl-layered double hydroxide (LDH) nanoparticles and polyacrylic acid or sodium polystyrene sulfonate. The multilayers were attached to ~50-nm thick gold films on microscopy glass slides prepared by vacuum evaporation. The contact between the gold film and the multilayered films was mediated via surface modification with thiols, adsorption of poly(diallyl dimethyl ammonium) chloride (PDDA) or direct binding of the LDH particles. Surface plasmon resonance (SPR) spectra of the multilayered films were analyzed by fitting the Fresnel equations. The shifts in the SPR angle (_SPR) due to the adsorption/deposition on the gold surface were used to evaluate the process of building up the multilayers. Strong surface/multilayer contact formed when electrostatic attraction and hydrophobic interaction were combined as in the case of mercaptopropanoic acid or PDDA sticking layers. The LDH suspension concentration strongly influenced the number of deposited layers. The multilayer films were investigated by reflection FT-IR spectroscopy.     

Highly efficient non-biofouling coating of zwitterionic polymers: poly((3-(methacryloylamino)propyl)-dimethyl(3-sulfopropyl)ammonium hydroxide)

This work describes the formation of highly efficient non-biofouling polymeric thin films of poly((3-(methacryloylamino)propyl)-dimethyl(3-sulfopropyl)ammonium hydroxide), (poly(MPDSAH)). The poly(MPDSAH) films were generated from the self-assembled monolayers terminating in an initiator of atom transfer radical polymerization (ATRP) by the surface-initiated ATRP of MPDSAH. The poly(MPDSAH) films on a gold surface were characterized by ellipsometry, FT-IR spectroscopy, contact angle goniometery, and X-ray photoelectron spectroscopy. The copper complexes and unpolymerized monomers trapped inside the polymer brushes were completely washed out by soaking the poly(MPDSAH)-coated substrate in water at 40 degrees C for 4 days. The amount of proteins nonspecifically adsorbed onto the poly(MPDSAH) films was evaluated by surface plasmon resonance spectroscopy: the adsorption of proteins was <0.6 ng/cm(2) on the surfaces for all the model proteins. The ability of the poly(MPDSAH) films to resist the nonspecific adsorption of proteins was comparable to that of the best known systems.     

Size-dependent adsorption of 1,4-phenylenediisocyanide onto gold nanoparticle surfaces

Adsorption of 1,4-phenylenediisocyanide (PDI) has been studied for different-sized gold nanoparticles with mean diameters of 6, 14, 23, 40, 57, and 97 nm using UV-vis absorption spectroscopy and surface-enhanced Raman scattering (SERS). The SERS enhancement was found to be relatively weak for 6-nm particles due to less aggregation between PDI and gold particles. Concentration-dependent SERS spectra show that PDI was assumed to bridge two different gold particles at low concentrations of PDI, but as the concentration was increased, the bridge appeared to be broken, and PDI bonded to the gold particle only via one of its two isocyanide groups. For the 57- and 97-nm particles, however, the nu(NC)(free) stretching band in the SERS spectrum almost disappeared, even at a high bulk concentration of PDI, differently from the case of the smaller sizes (14, 23, and 40 nm). The 57- and 97-nm particles appeared to cross-link through the pendent isocyanide group even at a high bulk concentration. UV-vis absorption spectra indicated that PDI appeared to aggregate more extensively with increasing size in agreement with Raman data. Our result shows an example that the adsorption scheme of an aromatic diisocyanide may be varied depending on particle size as well as the bulk concentration.     

Deposition of gold nanoparticles on silica spheres by electroless metal plating technique

A previously proposed method for metal deposition with silver [Kobayashi et al., Chem. Mater. 13 (2001) 1630] was extended to uniform deposition of gold nanoparticles on submicrometer-sized silica spheres. The present method consisted of three steps: (1) the adsorption of Sn(2+) ions took place on surface of silica particles, (2) Ag(+) ions added were reduced and simultaneously adsorbed to the surface, while Sn(2+) was oxidized to Sn(4+), and (3) Au(+) ions added were reduced and deposited on the Ag surface. TEM observation, X-ray diffractometry, and UV-vis absorption spectroscopy revealed that gold metal nanoparticles with an average particle size of 13 nm and a crystal size of 5.1 nm were formed on the silica spheres with a size of 273 nm at an Au concentration of 0.77 M.     

Preparation of end-grafted polymer brushes by nitroxide-mediated free radical polymerization of vaporized vinyl monomers

In this work, we report a gas-phase polymerization approach to create end-grafted vinyl based polymer films on silicon oxide based substrates. The "surface-initiated vapor deposition polymerization" (SI-VDP) of vaporized vinyl monomers, via the nitroxide-mediated free radical polymerization mechanism, was developed to fabricate various homo- and block copolymer brushes from surface-bound initiators, 1-(4'-oxa-2'-phenyl-12'-trimethoxysilyldodecyloxy)-2,2,6,6-tetra-methylpiperidine ("TEMPO"). The resulting polymer thin films were characterized by the Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, ellipsometry, and contact angle goniometry, respectively, to identify the surface composition, film thickness, surface coverage, and water contact angles. Through the SI-VDP, end-grafted polymer films of polystyrene (PSt), poly(acrylic acid) (PAAc), poly(N-(2-hydroxypropyl) methacrylamide) (PHPMA), and poly(N-isopropylacrylamide) (PNIPAAm) with 10-200 nm thicknesses were fabricated. Furthermore, the block copolymer films of PAAc (1st block)-b-PSt (2nd block), PSt (1st block)-b-PAAc (2nd block), and a triblock copolymer film of PAAc (1st)-b-PSt (2nd)-b-PHPMA (3rd), were also fabricated, suggesting the "renewability" of the TEMPO-initiated polymerization in the SI-VDP scheme. It is also noticed that the SI-VDP is more efficient than the conventional solution phase polymerization in producing functional polymer brushes such as PNIPAAm, PAAc, or PAAc-b-PSt end-grafted films. In summary, our studies have shown clear advantages of the SI-VDP setup for the nitroxide-mediated polymerization scheme in controlling synthesis of end-grafted homo- and copolymer thin films.     

Modification of indium-tin oxide electrodes with thiophene copolymer thin films: optimizing electron transfer to solution probe molecules

We describe the modification of indium-tin oxide (ITO) electrodes via the chemisorption and electropolymerization of 6-{2,3-dihydrothieno[3,4-b]-1.4-dioxyn-2-yl methoxy}hexanoic acid (EDOTCA) and the electrochemical co-polymerization of 3,4-ethylenedioxythiophene (EDOT) and EDOTCA to form ultrathin films that optimize electron-transfer rates to solution probe molecules. ITO electrodes were first activated using brief exposure to strong haloacids, to remove the top approximately 8 nm of the electrode surface, followed by immediate immersion into a 50:50 EDOT/EDOTCA co-monomer solution. Potential step electrodeposition for brief deposition times was used to grow copolymer films of thickness 10-100 nm. The composition of these copolymer films was characterized by solution depletion studies of the monomers and atomic force microscopy (AFM), X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy (reflection-absorption infrared spectroscopy (RAIRS)) of the product films. The spectroscopic data suggest that the composition of the copolymer approaches 80% EDOTCA when electropolymerization occurs from concentrated (10 mM) solutions. AFM characterization shows that electrodeposited poly(EDOT)/poly(EDOTCA) (PEDOT/PEDOTCA) films are quite smooth, with texturing on the nanometer scale. RAIRS studies indicate that these films consist of a combination of EDOTCA units with noninteracting -COOH groups and adjacent hydrogen-bonded -COOH groups. The EDOTCA-containing polymer chains appear to grow as columnar clusters from specific regions, oriented nearly vertically to the substrate plane. As they grow, these columnar clusters overlap to form a nearly continuous redox active polymer film. ITO activation and formation of these copolymer films enhances the electroactive fraction of the electrode surface relative to a nonactivated, unmodified "blocked" ITO electrode. Outer-sphere solution redox probes (dimethylferrocene) give standard rate coefficients, kS > or = 0.4 cm.s-1, at 10 nm thick copolymer films of PEDOT/PEDOTCA, which is 3 orders of magnitude greater than that on the unmodified ITO surface and approaches the values for kS seen on clean gold surfaces.     

Aerosol assisted chemical vapor deposition using nanoparticle precursors: a route to nanocomposite thin films

Gold nanoparticle and gold/semiconductor nanocomposite thin films have been deposited using aerosol assisted chemical vapor deposition (CVD). A preformed gold colloid in toluene was used as a precursor to deposit gold films onto silica glass. These nanoparticle films showed the characteristic plasmon absorption of Au nanoparticles at 537 nm, and scanning electron microscopic (SEM) imaging confirmed the presence of individual gold particles. Nanocomposite films were deposited from the colloid concurrently with conventional CVD precursors. A film of gold particles in a host tungsten oxide matrix resulted from co-deposition with [W(OPh)(6)], while gold particles in a host titania matrix resulted from co-deposition with [Ti(O(i)Pr)(4)]. The density of Au nanoparticles within the film could be varied by changing the Au colloid concentration in the original precursor solution. Titania/gold composite films were intensely colored and showed dichromism: blue in transmitted light and red in reflected light. They showed metal-like reflection spectra and plasmon absorption. X-ray photoelectron spectroscopy and energy-dispersive X-ray analysis confirmed the presence of metallic gold, and SEM imaging showed individual Au nanoparticles embedded in the films. X-ray diffraction detected crystalline gold in the composite films. This CVD technique can be readily extended to produce other nanocomposite films by varying the colloids and precursors used, and it offers a rapid, convenient route to nanoparticle and nanocomposite thin films.     

Anisotropic hydrogel thickness gradient films derivatized to yield three-dimensional composite materials

We report the preparation of in-plane density gradients of amino-terminated molecules and gold particles through derivatization of laterally varying thickness gradients of poly(acrylic acid) (PAA) or poly(acrylamide) (PAAm) films. PAA and PAAm gradients were formed by Zn(II)-catalyzed electropolymerization of acrylic acid (AA) or acrylamide (AAm) in the presence of an in-plane electrochemical potential gradient applied to Au or indium-tin-oxide (ITO) working electrodes. PAA thickness gradients were converted into density gradients of fluorocarbons or biocompatible groups by derivatizing with NH(2)CH(2)(CF(2))(6)CF(3) or an Arg-Gly-Asp (RGD)-containing peptide, respectively. X-ray photoelectron spectroscopy (XPS) and XPS imaging were used to characterize the modified PAA gradients. Transition regions as narrow as 104 mum were achieved for fluorocarbon gradients. PAAm gradients were treated with gold particles to form a density gradient of gold particles. Surface plasmon resonance imaging and scanning electron microscopy (SEM) as well as UV-visible absorption measurements were used to characterize the gold particle density gradients. It is likely that the gold particles were attached both on the surface and inside the PAAm film.     

Surface grafted sulfobetaine polymers via atom transfer radical polymerization as superlow fouling coatings

One of the sulfobetaine methacrylate (SBMA) monomers, N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine, was polymerized onto initiator-covered gold surfaces using atom transfer radical polymerization (ATRP) to form uniform polymer brushes. Self-assembled monolayers (SAMs) with ATRP initiators were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The thickness of grafted poly(SBMA) films was measured by ellipsometry. Fibrinogen adsorption on poly(SBMA) grafted surfaces was measured with a surface plasmon resonance (SPR) sensor. Two approaches were compared to graft ATRP initiators onto gold surfaces for surface polymerization and subsequent protein adsorption on these polymer grafted surfaces. The first was to prepare a SAM from omega-mercaptoundecyl bromoisobutyrate onto a gold surface. Superlow fouling surfaces with well-controlled poly(SBMA) brushes were achieved using this approach (e.g., fibrinogen adsorption <0.3 ng/cm2). The second approach was to react bromoisobutyryl bromide with a hydroxyl-terminated SAM on a gold surface. Although protein adsorption decreased as the density of surface initiators increased, the surface prepared using the second approach was not able to achieve as low protein adsorption as the first approach. Key parameters to achieve superlow fouling surfaces were studied and discussed.     

Nucleation and growth of gold nanoparticles on adsorption layers and in ultrathin films of poly(2-vinylpyridine)

Peculiarities of the nucleation and growth of gold nanoparticles on adsorption layers and in ultrathin films of poly(2-vinylpyridine) (PVP) in the chemical reduction of sorbed Au(III) ions and the consequent thermal treatment of systems are studied by X-ray photoelectron spectroscopy and optical spectroscopy. It is shown that nitrogens of PVP pyridine groups coordinate gold atoms. It is revealed that, even at relatively short contact between PVP film saturated with chloroauric acid and the solution of strong reductant NaBH₄, Au(III) ions are reduced to metal. As a result, quasi-metal gold particles are formed. At the same time, when exposing a PVP-Au system to the solution of weak reductant NH₂OH, the process of reduction proceeds in several stages. First, Au(III) ions are reduced to Au(I) followed by the reduction to Au(0) as a result of disproportionation reaction. It is demonstrated for the first time that, upon using NH₂OH, the rate of reduction, as well as the structure of prepared PVP-Au nanocomposite films depends to substantial extent on solution pH. Prolonged annealing of ultrathin nanocomposites at 150 °C, i.e., above the glass transition temperature of polymer matrix, leads to an increase in the sizes of metal particles and the formation of systems characterized by intense absorption within the 500–600-nm range due to the localized plasmon resonance of gold nanoparticles.     

Combinatorial approach to the study of particle size effects in electrocatalysis: synthesis of supported gold nanoparticles

A high-throughput method for physical vapor deposition has been applied to the synthesis of libraries of supported gold particles on amorphous substoichiometric TiO(x)() and carbon supports. The TiO(x)() substrate stoichiometry can be varied or kept constant across a supporting sample, and subsequent deposition of particle sizes on supports are controlled through the nucleation and growth process. TEM measurements indicate nucleation and growth of Au particles takes place, with the smallest particles initially observed at 1.4 nm with a maximum density of 5.5 x 10(12) cm(-2) on titania, and 2.6 nm with concomitantly lower density on carbon. The 1.4-nm particles on titania exhibit a binding energy shift in the Au(4f) core level of 0.3 eV from bulk gold, and the shift is approximately 0.1 eV by the time particles grow to a mean size of 2.5 nm. These shifts are associated with final state effects, and the supported gold particles are metallic and appear to be relatively stable in air. When combined with appropriate substrates and screening techniques, this method provides a highly controllable method for the high-throughput synthesis of model supported catalyst.     

Labeled gold nanoparticles immobilized at smooth metallic substrates: systematic investigation of surface plasmon resonance and surface-enhanced Raman scattering

This paper experimentally and theoretically investigates the influence of an underlying metallic substrate (i.e., gold and silver) on the surface plasmon resonance (SPR) of labeled gold nanoparticles and the concomitant impact on the surface-enhanced Raman scattering (SERS) signal from the labels. These experiments employ nanoparticles of varied sizes (30-100 nm) that are coated with a bifunctional Raman scatterer composed of (1) a disulfide for chemisorption to the nanoparticle surface, (2) a succinimidyl ester for formation of a covalent linkage to an amine-terminated self-assembled monolayer on the underlying substrate, and (3) an aryl nitro group with an intrinsically strong Raman active vibrational mode. This approach allows facile systematic assessments of how variations in nanoparticle size, substrate composition, and the gap between the nanoparticle and substrate affect the SPR of the bound particles. Both UV-vis transmission and reflection absorption (incident angle of 58 degrees ) spectroscopy are used to characterize the effect of each of these parameters on SPR. These results are then correlated with SERS enhancement factors (EFs) that were determined by accounting for particle surface concentrations, which were measured by atomic force microscopy, and the absolute number of labels, which were calculated on the basis of the surface area of each of the different-sized particles. All SERS spectra were collected at an incident angle of 58 degrees with respect to the surface normal. As expected, the SPR for particles in solution red-shifts with increasing particle size. More importantly, the SPR moves to even longer wavelengths as the size of immobilized particles increases and as the gap between the immobilized particle and substrate decreases. The red shift is also greater for a gold nanoparticle tethered to a gold substrate compared to a silver substrate. A theoretical model for the extinction of a particle above a flat substrate, corrected for surface scattering, radiation damping, and dynamic depolarization, is also briefly detailed. SPR results calculated with the model are consistent with the shifts observed in the SPR position for each of the manipulated experimental variables. The largest EFs are found for samples with an SPR maximum (lambda(max)) between the wavelengths for laser excitation (633 nm) and the Raman band for the symmetric nitro stretch of the particle coating (690 nm). As an example, an order of magnitude in the SERS enhancement factor is gained for a 60-nm particle immobilized 1.2 nm above a gold substrate (SPR lambda(max) = 657 nm) compared to that for a 30-nm particle (SPR lambda(max) = 596 nm).     

Biotin-doped porous polypyrrole films for electrically controlled nanoparticle release

A novel method for the preparation of biotin-doped porous conductive surfaces has been suggested for a variety of applications, especially for an electrically controlled release system. Well-ordered and three-dimensional porous conductive structures have been obtained by the electrochemical deposition of the aqueous biotin-pyrrole monomer mixture into particle arrays, followed by subsequent removal of the colloidal particles. Advantageously, direct incorporation of biotin molecules enhances the versatility by modifying surfaces through site-directed conjugate formation, thus facilitating further reactions. In addition, the porosity of the surfaces provides a significant impact on enhanced immobilization and efficient release of streptavidin-tagged gold nanoparticles. Biotinylated porous polypyrrole (Ppy) films were characterized by several techniques: (1) scanning electron microscopy (SEM) to evaluate surface topography, (2) X-ray photoelectron spectroscopy (XPS) to assess the potential-dependent chemical composition of the films, (3) four-point probe evaluation to measure the conductivity, cyclic voltammetry to observe surface eletroactivity, and contact angle measurement to evaluate the surface wettability, and (4) fluorescence microscopy to image and quantify the adsorption and release of gold nanoparticles. Overall, our results demonstrate that these biotinylated porous Ppy films, combined with electrical stimulation, permit a programmable release of gold nanoparticles by altering the chemical strength of the Ppy-biotin interaction.     

Light-induced aggregation of colloidal gold nanoparticles capped by thymine derivatives

The colloid stability of thymine-coated gold nanoparticles under light irradiation as a function of particle size, surface charge, and exposure time was investigated in alkaline, aqueous solutions as well as in a 0.5 vol % of DMF in H(2)O mixture. With increasing exposure to light irradiation at 280 nm, more and more particles coagulated. Light-induced aggregation of colloidal gold nanoparticles was attributed to reorientation of thymine terminal groups tethered on gold particle surfaces. A smaller particle size and negatively charged surface reduced the rate of photodimerization or even inhibited the photoreaction. UV-vis and FTIR spectroscopy confirmed the photodimerization of terminal thymine molecules under 280 nm light irradiation. The reaction kinetics of thymine photodimerization appears to be a combination of first-order reactions, each having different rates, reflecting the inhomogeneity and high curvature of the gold nanoparticle surfaces.     

Submicron streptavidin patterns for protein assembly

Micron and submicron-scale features of aldehyde functionality were fabricated in polymer films by photolithography to develop a platform for protein immobilization and assembly at a biologically relevant scale. Films containing the pH-reactive polymer poly(3,3'-diethoxypropyl methacrylate) and a photoacid generator (PAG) were patterned from 500 nm to 40 mum by exposure to 365 nm (i-line) light. Upon PAG activation and hydrolysis of acetals, aldehyde groups formed. After the films were incubated with a biotinylated aldehyde reactive probe, the X-ray photoelectron spectroscopy results were consistent with biotin being attached to the surface. The background was subsequently passivated by flood exposure and incubation with an aminooxy-terminated poly(ethylene glycol), resulting in a 98% reduction in nonspecific protein adsorption. Protein patterning and assembly was demonstrated using streptavidin, biotinylated anthrax toxin receptor-1, and the protective antigen moiety of anthrax toxin and confirmed by fluorescence microscopy and atomic force microscopy (AFM). AFM demonstrated that 500 nm protein features were achieved. Because of the abundance of biotinylated proteins, this methodology provides a platform for protein immobilization and assembly for various applications in biotechnology.     

粉煤灰物化性质对单质汞吸附性能的影响

在固定床实验台上考察了三种不同来源粉煤灰对单质汞的吸附性能,采用X射线荧光光谱仪、X射线光电子能谱仪、激光粒度分析仪、扫描电子显微镜等对不同粉煤灰的物化性质进行了表征,并探讨了物化性质对汞吸附性能的影响。结果表明,粉煤灰对汞的吸附包括物理吸附和化学吸附;粉煤灰中未燃尽碳是影响粉煤灰汞吸附性能的重要因素之一,其中,表面C元素与Ti、Si等元素(M)相互作用形成的"C-M"化学键促进了单质汞的氧化,同时粉煤灰中含有的无机化合物Fe₂O₃等也对单质汞的氧化有促进作用;增大比表面积和减小孔径,及适中的颗粒粒径均有利于提高粉煤灰单质汞吸附性能。