Quantum-Chemical Study of the Adsorption of Pb2+ on Au(111)

The interaction between the Pb²⁺ ion and gold is studied using the cluster metal surface model and the density functional method. The geometric and energy characteristics of the interaction between this ion and the gold surface are estimated. The form in which the Pb²⁺ ion exists on the surface is more ad-ionic than ad-atomic. The electron structure of the Au–Pb_ads²⁺ system is analyzed. The participation of the adsorbed lead ion and its neighboring gold atoms in the formation of molecular orbitals in this system is estimated. It is established that the contribution to their formation is predominantly provided by the lead s-orbitals and the gold d-orbitals. The interaction with a solvent decreases the transfer of a charge from an adsorbed lead ion to gold. It is demonstrated that the hydrolyzability of a lead ion decreases upon its transition from the electrolyte phase to the surface.

     

Citric Acid Determination by Dual Wavelength Spectrophotometry

In this study, a dual wavelength spectrophotometric method was presented on the basis of Cu²⁺‐NH₃ complex decomposition by the citrate ion and the formation of Cu²⁺‐citrate complex. Sum of the absorbance decreasing at 600 nm (λ_max for Cu²⁺‐NH₃ complex) and the absorbance increasing at 750 nm (λ_max for Cu²⁺‐citrate complex) was used in quantification. This method is very selective, fast and inexpensive but relatively less sensitive. The calibration curve is linear in the range of 0.4–8 mmol/L with a detection limit of 0.13 mmol/L. The relative standard deviation (RSD%) for the six repeated determinations (2 mmol/L) is 1.75%. Interference studies of more than twenty common compounds, which are present in the studied samples, were carried out. Only oxalic and ascorbic acids are serious interferes and which interferences were eliminated by simple procedures. Finally, the proposed method was successfully applied in the determination of citric acid content in ORS powder and some fruit juices.     

枸橼酸盐抑制泌尿系结石形成的化学基础

本文综述了防石药物枸橼酸及其盐对泌尿系结石形成、抑制和治疗的化学基础，重点讨论了其与钙离子的配位、封闭尿石矿物生长活性位点、抑制草酸钙的成核和生长、增加尿液中尿大分子和枸橼酸浓度、改变尿液pH以及诱导二水草酸钙和三水草酸钙形成，并讨论了抗衡阳离子对枸橼酸盐抑制能力的影响。     

Simultaneous dual wavelength spectrophotometric determination of citric and ascorbic acids using an artificial neural network

In this study, a very simple spectrophotometric method for the simultaneous determination of citric and ascorbic acid based on the reaction of these acids with a copper(II)-ammonia complex is presented. The Cu²⁺-NH₃ complex (with λ_max = 600 nm) was decomposed by citrate ion and formed a Cu²⁺-citrate complex (with λ_max = 740 nm). On the other hand, during the reaction of ascorbic acid with copper(II)-ammonia complex, ascorbic acid is oxidized and the copper(II)-ammonia complex is reduced to the copper(I)-ammonia complex and the absorbance decreases to 600 nm. Although there is a spectral overlap between the absorbance spectra of complexes Cu²⁺-NH₃ and Cu²⁺-citrate, they have been simultaneously determined using an artificial neural network (ANN). The absorbances at 600 and 740 nm were used as the input layer. The ANN architectures were different for citric and ascorbic acid. The output of the citric acid ANN architecture was used as an input node for the ascorbic acid ANN architecture. This modification improves the capability of the ascorbic acid ANN model for the prediction of ascorbic acid concentrations. The dynamic ranges for citric and ascorbic acid were 1.0–125.0 and 1.0–35.0 mM, respectively. Finally, the proposed method was successfully applied to the determination of citric and ascorbic acids in vitamin C tablets and some powdered drink mixes. The text was submitted by the authors in English.     

THE EQUILIBRIA AND KINETICS OF THE COMPLEX FORMATION BETWEEN Fe(III) AND TARTARIC AND CITRIC ACIDS

Abstract

The equilibria and kinetics of formation of 1 : 1 iron(III) complexes with tartaric and citric acids have been studied in the pH range 1.0–2.0 in aqueous alcoholic perchlorate media. The equilibrium constants for the reactions Fe³⁺ +

H₄L^keq Complex + nH⁺ were obtained from spectrophotometric measurements in the wavelength range 360–420 nm. The values of K _eq determined at 20°, μ=1.0 M (water 100%), were 0.21 M with n=2 for tartaric and 0.0186 M² with n=3 for citric acid. The stoichiometry of the complex formation and the reaction sites of the ligands were discussed with reference to previous findings on ligands of related structures. The kinetics of the reactions were carried out by the stopped-flow technique. From the hydrogen ion dependence of the reaction rates it can be shown that complex formation occurs between FeOH²⁺ and differently protonated forms of the ligands. Forward rates for the different paths are consistent with an SN1 IP interaction in agreement with the Eigen mechanism; forward and reverse rate quotients enabled the evaluation of the equilibrium constants which agreed satisfactorily with the spectrophotometric ones. The effect of varying the solvent composition (water-alcohol) was discussed with reference to the reaction mechanism.     

Transition Metal Ion-binding Properties of a 14-Membered N2O2S2- Macrobicyclic Ligand

The selective liquid–liquid extraction of various transition metal cations from the aqueous phase to the organic phase was carried out using a 14-membered N₂O₂S₂-macrobicycle. Metal picrates such as Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺,Cu²⁺ and Cd²⁺ were used in this extraction studies. It was found that the ligand showed moderate selectivity towards Pb²⁺ only among the other metals. The extraction constant (log K _ex) was determined to be 13.8 for Pb²⁺ complex.     

Kinetics and mechanism of the alkali metal ions promoted electron transfer between 12-tungstocobaltate(III) and citric acid

The kinetics of the interactions of the Keggin type heteropolyanion [CoW₁₂O₄₀]^5?, with all the molecular and anionic forms of citric acid have been investigated spectrophotometrically in the pH range 0.60–5.45 at 60°C. With the exception of the molecular form of the acid (H₃L), all the other species (H₂L^?, HL^2?, and L^3?) undergo oxidation through an alkali metal ion catalyzed path in addition to the uncatalyzed one. The catalytic power increases with increasing size of the alkali metal ion. The contributions of each path have been evaluated from the kinetic data with the help of the measured dissociation constant values of citric acid. A plausible mechanism involving the formation of a bridged outer-sphere complex of the reacting species with the alkali cation, has been suggested. The observed limiting dependence of k_obs on [citrate] at high concentrations owing to an equilibrium between the reactants preceeding the electron transfer step supports the proposed mechanism. The pH-rate profile gives an excellent fit with the evaluated kinetic parameters.     

Solvent‐free polymerization of citric acid and hexamethylenediamine for novel carboxylated polyamides

Copolymers of tributyl citrate (TBC) and hexamethylenediamine (HMDA) were synthesized with a solvent‐free condensation method with molar ratios of TBC to HMDA varying from 2:1 to 1:2. The reaction led to poly(succinimide‐co‐citramide) copolymers which were characterized by infrared and Raman spectroscopies, X‐ray diffraction, and thermal analyses. Hydrolysis of the copolymers resulted in water soluble polycitramides with number averaged molecular weights ranging from 1.16 × 10⁴ to 5.00 × 10³ as determined by gel permeation chromatography. ¹H, ¹³C, and ¹³C‐¹H‐heteronuclear single quantum coherence NMR spectroscopy has confirmed that the hydrolyzed polycitramides with COOH side chains and amide backbones are structurally similar to biodegradable poly(aspartic acid) (PASP). Interestingly, the polycitramides showed Ca²⁺ and Pb²⁺ ion chelating capabilities higher than PASP, citric acid–sorbitol copolymers, or conventional resins. Thus, the polycitramides offer promise as a totally new class of metal sequesters and renewable substitutes for PASP and poly(acrylic acid). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Complex formation of indium(<Emphasis Type="SmallCaps">iii</Emphasis>) with citric acid in aqueous solution

Complex formation of In³⁺ ion with citric acid in an aqueous solution was studied by pH-metric titration at the molar ratio of the reactants [In³⁺] : [H₄Cit] = 1 : 1, 1 : 2, and 1 : 3 in a range of pH 2—10. The mathematical simulation of equilibria in an indium(iii)—citric acid system was performed using the CPESSP program package. The formation of 1 : 1, 1 : 2, and 1 : 3 indium(iii) citrate complexes with different degrees of nuclearity and protonation was established. The equilibrium constants of formation of the complexes were calculated. The predomination of the polynuclear indium(iii) citrate complexes at the equimolar metal to ligand ratio of was observed in almost the whole pH range studied (3—10).     

Adsorption of Pb(2+) ions on nanosized gamma-Fe(2)O(3): formation of surface ternary complexes on ligand complexation

Adsorption of Pb²⁺ ions on the combustion derived nanosized γ-Fe₂O₃ and its thiourea complex composite is reported. The adsorbents upon adsorption of Pb²⁺ ions are characterised by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray microanalysis and infrared spectroscopy techniques. The eluent is characterised by atomic absorption spectroscopy for the estimation of Pb²⁺ ions. The reduction in the amount of lead after adsorption was estimated to be around 50% in case of complex composite adsorbent and around 15% in case of the γ-Fe₂O₃ adsorbents. Orthorhombic PbSO₄ precipitated out from the eluent and is reported with a model reaction. Adsorption of lead onto the complex composite is explained through the formation of a surface tertiary complex. The advantage of employing a thiourea-γ-Fe₂O₃ complex composite as solid adsorbent for the adsorption of heavy metal pollutants is envisaged in the present investigation.     

Interaction of the divalent lead cation with cyclosporin A: an experimental and theoretical study

On the basis of extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium Pb²⁺(aq) + 1·Sr²⁺(nb) ? 1·Pb²⁺(nb) + Sr²⁺(aq) occurring in the two-phase water–nitrobenzene system (1 = cyclosporin A; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex (Pb²⁺, 1·Sr²⁺) = 0.1 ± 0.1. Further, the stability constant of the 1·Pb²⁺ complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β _nb (1·Pb²⁺) = 9.2 ± 0.2. Finally, applying quantum chemical DFT calculations, the most probable structure of the proven 1·Pb²⁺ cationic complex species was derived. In the resulting complex, the “central” cation Pb²⁺ is bound by four bonding interactions to the corresponding four oxygen atoms of the parent cyclosporin A ligand. The interaction energy, E(int), of the considered 1·Pb²⁺ complex was found to be ?1016.3 kJ/mol, confirming also the formation of this complex.

     

MnO2 nanozyme induced the chromogenic reactions of ABTS and TMB to visual detection of Fe2+ and Pb2+ ions in water

In this study, we used a simple and rapid colourimetric reaction for visual sensing of Fe²⁺ and Pb²⁺ ions in water by employing nano-MnO₂ as a natural oxidase mimic to respectively catalyse ABTS and TMB in citrate-phosphate buffer solution (C-PBS) at 25°C and pH 3.8. It was found that nano-MnO₂ possessed highly oxidase-mimicking activity with the K_m values of 0.030 and 0.027 toward ABTS and TMB, respectively, indicating TMB had a stronger affinity on nano-MnO₂ than ABTS. Interestingly, the presence of 0.01 mmol·L^?1 Fe²⁺/Pb²⁺ ion was able to significantly down-regulate the activity of MnO₂ nanozyme in nano-MnO₂-mediated ABTS reaction processes (P < 0.01), which mainly due to the strong adsorption of metal ion toward nano-MnO₂ surface via the electrostatic attractions, thus leading to the passivation and inactivation of MnO₂ nanozyme catalytic activity. Thereinto, Fe²⁺ reacted with multivalent manganese by oxidation-reduction, while Pb²⁺ was specifically adsorbed onto the surface of MnO₂ nanozyme and formed complexes. Notably, only Fe²⁺ ion inhibited the activity of MnO₂ nanozyme-TMB with a detection limit as low as 1.0 μmol·L^?1. In MnO₂ nanozyme-ABTS sensing systems, Fe²⁺ and Pb²⁺ ions detection limit of 0.5 and 2.0 μmol·L^?1 were, respectively, achieved with a linear response range of 0–0.02 and 0–0.8 mmol·L^?1, implying the developed MnO₂ nanozyme-ABTS sensor was potentially applicable for the visual determination of Fe²⁺ and Pb²⁺ ions in water. In the real water samples, MnO₂ nanozyme-ABTS achieved high accuracy (relative errors: 3.4?10.5%) and recovery (96?110%) for respective detection of Fe²⁺ and Pb²⁺ ions. The simple and rapid MnO₂ nanozyme-ABTS sensing systems might provide a practical assay for visual detection of Fe²⁺ and Pb²⁺ ions in the environmental water samples.     

The Synthesis of New Triazole Ligands and Determination of Complex Stability Constants with Transition Metal Cations in Aqueous Media

Six new triazole compounds were synthesized. These compounds containing the substituted benzylidenamino group were obtained by reaction of 3-(pyridine-4-yl)-5-p-tolyl-4-amino-4H-l,2,4-triazole 1 with the corresponding aldehyde. The reduced forms were prepared with NaBH₄ in methanol. The structures of the compounds were determined by IR, ¹H NMR, and ¹³C NMR spectral data, and their interaction with cations such as Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Ba²⁺, Sr²⁺, Ca²⁺, Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Ag⁺ were investigated by using UV-visible spectrophotometry. Of the tested metal cations, Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Ag⁺ complexed with the ligands. The complex stability constants (log ₁₀ K) were measured in slightly acidic aqueous media at 25.0±0.1 °C. These stability constants were determined by measuring the increase in solubility of the nearly insoluble ligand molecule due to complex formation with a soluble cation, and this method is discussed. It was found that the position of chlorine atoms on the benzene ring strongly affects the complexation of Cu²⁺ ion with these ligands.     

Electrocatalytic behaviour of citric acid at a cobalt phthalocyanine-modified screen-printed carbon electrode and its application in pharmaceutical and food analysis

Cobalt phthalocyanine-modified screen-printed carbon electrodes (CoPC-SPCEs) have been investigated as disposable sensors for the measurement of citric acid. The analyte was found to undergo an electrocatalytic oxidation process involving the Co²⁺/Co³⁺ redox couple. Calibration plots were found to be linear in the range 2 mM to 2.0 M; replicate determinations of a 5.2 mM citric acid (n = 4) solution gave a coefficient of variation of 1.43%. Additions of metal ions, such as Ag⁺, Pb²⁺, Cu²⁺, Fe³⁺ and Ca²⁺, were found not to interfere. The effects of hesperidin, cysteine, ethylenediaminetetraacetic acid (EDTA), ascorbic, formic, malic, malonic, tartaric, oxalic and trichloroacetic acids on the determination of citric acid were examined and, under the conditions employed, only oxalic acid and EDTA were found to give any significant interference. The sensors were evaluated by carrying out citric acid determinations on spiked and unspiked samples of an acid citrate dextrose (ACD) formulation, lime flesh and juice. For lime juice, recoveries were calculated to be 96.8% (% CV = 2.7%) for a sample fortified with 5% citric acid and for ACD 99.4% (%CV = 2.6%) when fortified at 2.30% citric acid. Further studies showed the possibility of determining citric acid concentrations in lime juice and fruit directly, without the need for an added electrolyte. These performance characteristics indicate that reliable data may be obtained for citric acid measurements in such samples. To our knowledge, this is the first report on the electrocatalytic oxidation of citric acid and its application using a CoPC-SPCE.     

Two‐Dimensional Holo‐ and Hemidirected Lead(II) Coordination Polymers: Synthetic,Spectroscopic, Thermal,and Structural Studies of [Pb(μ‐SCN)2(μ‐ebp)1.5]n and {[Pb(μ‐OAc)(μ‐ebp)](ClO4)}n (ebp=4,4′‐[(1E)‐Ethane‐1,2‐diyl]bis[pyridine]; OAc=Acetato)

Two new coordination polymers of Pb^II complexes with bridging 4,4′‐[(1E)‐ethane‐1,2‐diyl]bis[pyridine] (ebp), thiocyanato, and acetato ligands, [Pb(μ‐SCN)₂(μ‐ebp)_1.5]_n ( 1 ) and {[Pb(μ‐OAc)(μ‐ebp)](ClO₄)}_n ( 2 ), were synthesized and characterized by elemental analysis, FT‐IR, ¹H‐ and ¹³C‐NMR, thermal analysis, and single‐crystal X‐ray diffraction. In 1 , the Pb²⁺ ions are doubly bridged by both the ebp and the SCN⁻ ligands into a two‐dimensional polymeric network. The seven‐coordinate geometry around the Pb²⁺ ion in 1 is a distorted monocapped trigonal prism, in which the Pb²⁺ ions have a less‐common holodirected geometry. In 2 , the Pb²⁺ ions are bridged by AcO⁻ ligands forming linear chains, which are also further bridged by the neutral ebp ligands into a two‐dimensional polymeric framework. The Pb²⁺ ions have a five‐coordinate geometry with two N‐atoms from two ebp ligands and three O‐atoms of AcO⁻. Although ClO acts as a counter‐ion, it also makes weak interactions with the Pb²⁺ center. The arrangement of the ligands in 2 exhibits hemidirected geometry, and the coordination gap around the Pb²⁺ ion is possibly occupied by a configurationally active lone pair of electrons.     

Complexation of iminodisuccinic acid (IDS) and 3-hydroxy-2,2′-iminodisuccinic acid (HIDS) with Cd2+, Hg2+, and Pb2+ in aqueous solution

In a search for environmentally friendly metal-chelating ligands for industrial applications, the protonation and complex formation equilibria of iminodisuccinic acid (IDS) and 3-hydroxy-2,2′-iminodisuccinic acid (HIDS) with Cd²⁺, Hg²⁺, and Pb²⁺ in aqueous 0.1?mol?L^?1 NaNO₃ solution were studied at 25°C by potentiometric titration. Models for complexation and stability constants of the different complexes were determined for each metal ion using the computer program SUPERQUAD. In all cases, complex formation was dominated by stable ML^2? complexes.     

Thermodynamics of citrate complexation with Mn<Superscript>2+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript> ions

Isothermal titration calorimetry has been used to determine the stoichiometry, formation constants and thermodynamic parameters (ΔG ^o, ΔH, ΔS) for the formation of the citrate complexes with the Mn²⁺, Co²⁺, Ni²⁺ and Zn²⁺ ions. The measurements were run in Cacodylate, Pipes and Mes buffer solutions with a pH of 6, at 298.15 K. A constant ionic strength of 100 mM was maintained with NaClO₄. The influence of a metal ion on its interaction energy with the citrate ions and the stability of the resulting complexes have been discussed.     

Binding characteristics of native cyclofructan 6 and its derivatives with metal ions

The binding ability of native, isopropylated and permethylated cyclofructan 6 (CF6) with various cations was characterised in water and hydro-organic solvents. Association constants (K_ass) of 24 cations including alkali metals, transition metals and lanthanides were measured using NMR titrations and a nonlinear least square treatment of the data. Ba²⁺ and Pb²⁺ showed the highest binding abilities with native CF6 in both D₂O and 40% methanol-d₄. Metal ion binding increased with an increasing in methanol content. The weaker binding of cations with CF6 in acetonitrile-d₃ compared with those of methanolic solvents was noted and indicated the importance of dehydration of the host and guest to binding affinity. The effect of counteranions such as chloride, nitrate, perchlorate and acetate on binding was examined. Isopropyl-CF6 provided slightly higher binding affinities with cations than native CF6 in D₂O and 40% methanol-d₄, whereas permethylated CF6 only associated with K⁺ cation in 80% methanol-d₄. There are distinctly different metal ion-binding selectivities between native and derivatised CF6.     

Molecular Design Strategy for Ordered Mesoporous Stoichiometric Metal Oxide

A molecular design strategy is used to construct ordered mesoporous Ti³⁺‐doped Li₄Ti₅O₁₂ nanocrystal frameworks (OM‐Ti³⁺‐Li₄Ti₅O₁₂) by the stoichiometric cationic coordination assembly process. Ti⁴⁺/Li⁺‐citrate chelate is designed as a new molecular precursor, in which the citrate can not only stoichiometrically coordinate Ti⁴⁺ with Li⁺ homogeneously at the atomic scale, but also interact strongly with the PEO segments in the Pluronic F127. These features make the co‐assembly and crystallization process more controllable, thus benefiting for the formation of the ordered mesostructures. The resultant OM‐Ti³⁺‐Li₄Ti₅O₁₂ shows excellent rate (143 mAh g^?1 at 30 C) and cycling performances (<0.005 % fading per cycle). This work could open a facile avenue to constructing stoichiometric ordered mesoporous oxides or minerals with highly crystalline frameworks.     

零维/二维MXene复合膜的制备及其超级电容器性能

采用水热法制备了0D/2D复合Ti₃C₂T_x MXene,利用X射线衍射、动态光散射和荧光光谱表征了其结构与形貌,结果表明形成了量子点吸附于纳米片的Ti₃C₂T_x复合结构（QDT）。相比未引入量子点的Ti₃C₂T_x,由QDT组装得到的自支撑膜电极的电化学性能有了显著提高：在三电极体系中,扫速为5 mV·s^-1时,比电容为338 F·g^-1,当扫速达到2 000 mV·s^-1,电容保持率达到46%;在两电极体系中,0.5 A·g^-1时的比电容达到216 F·g^-1,10 000次循环后电容保持率为87%。以上性能可归结于：量子点提供了更多的离子吸附位点,且纳米片尺寸减小,缩短了离子传输路径。