Identification of the piezoelectric material coefficients using the finite element method with an asymptotic waveform evaluation

A rapid identification of the piezoelectric material constants for a piezoelectric transducer is proposed. The validity of a three-dimensional finite element routine was confirmed experimentally. The asymptotic waveform evaluation (AWE) was adopted for a fast frequency sweep of the finite element analysis. The three-dimensional finite element method with an AWE and a design sensitivity method was used for a material inversion scheme of piezoelectric transducers. In order to confirm the inversion routine of the material constants, the mechanical displacements, which mean the mode shape, were calculated along the vertical and lateral position of the sample transducer.     

一种拓宽凸球面压电换能器指向性的方法

利用有限元和边界元耦合的方法对涂环氧树脂后的压电陶瓷凸球面换能器进行了指向性仿真计算,发现这种形式的换能器具有较宽的指向性开角。实验测量结果证明了上述结论。     

Application of the FEM and the BEM to compute the field of a transducer mounted in a rigid baffle (3D case)

A three-dimensional finite element model has been developed which allows the harmonic analysis of a piezoelectric structure mounted on a rigid baffle and radiating into water. The solution of this problem consists of coupling a finite element method to a boundary element method. The first one enables the modelling of the vibrating structure and the second one the modelling of propagating waves in the semi-infinite fluid medium surrounding the structure. In this way, the near-field and the far-field pressures are calculated as well as the displacement field of the piezoelectric structure taking into account the acoustical interaction. Numerical and experimental results are provided which validate the numerical procedure. The good agreement obtained indicates that this three-dimensional model is a very useful tool to optimise the design of transducer arrays used in medical imaging.     

Design and modeling of inversion layer ultrasonic transducers using LiNbO3 single crystal

Using inversion domain engineering controlled by heating temperature, the LiNbO(3) (LNO) piezoelectric plate with both odd and even-order thickness-extensional modes can be excited simultaneously. Therefore, the inversion layer ultrasound transducer is expected to be capable of operating over a wider frequency range. In this paper, the electrical impedance and the acoustic characteristics of LiNbO(3) (LNO) inversion layer transducer have been studied by finite element modeling (FEM). The transducer designed for this study uses a 36 degrees rotated Y-cut LiNbO(3) thin plate with an active element thickness of approximately 100 microm. First the electrical and elastic properties of the 36 degrees rotated Y-cut LNO were obtained by transforming a basic piezoelectric matrix for Z-cut LNO. In order to validate the FEM using the transformed properties several pieces of pure and 50% inversion layer LNO were tested on the electrical impedance analyzer. The modeled impedance characteristics were consistent with the measured data. Next the model was used to design 50-60 MHz transducers using pure and 30% inversion LNO. Two lambda/4 matching layers and a Tungsten loaded epoxy backing were used in these designs. The modeled results show that an over 90% bandwidth transducer can be made with proper matching and 30% inversion layer.     

Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

A three-dimensional thermo-mechanical coupled finite element model is built up to simulate the phenomena of dynamical contact and frictional heating of crack faces when the plate containing the crack is excited by high-intensity ultrasonic pulses.In the finite element model,the high-power ultrasonic transducer is modeled by using a piezoelectric thermal-analogy method,and the dynamical interaction between both crack faces is modeled using a contact-impact theory.In the simulations,the frictional heating taking place at the crack faces is quantitatively calculated by using finite element thermal-structural coupling analysis,especially,the influences of acoustic chaos to plate vibration and crack heating are calculated and analysed in detail.Meanwhile,the related ultrasonic infrared images are also obtained experimentally,and the theoretical simulation results are in agreement with that of the experiments.The results show that,by using the theoretical method,a good simulation of dynamic interaction and friction heating process of the crack faces under non-chaotic or chaotic sound excitation can be obtained.     

Vibration characteristics of a piezoelectric open-shell transducer

This paper deals with the vibration characteristics of a piezoelectric open-shell transducer which was made by dividing a cylindrical piezoelectric transducer longitudinally into two segments. Two-dimensional governing equations were derived by using the cylindrical membrane theory. Applying mechanical and electrical boundary conditions yielded a characteristic equation for the resonance frequencies of the piezoelectric open-shell transducer. The fundamental frequency and the electromechanical coupling factor were calculated and compared with the results of the finite element analysis and experiment. The fundamental mode shape obtained theoretically was compared with the result of the finite element analysis. The theoretical analysis was verified to provide the vibration characteristics of an open-shell transducer.     

压电陶瓷复合换能器固有频率的有限差分法*

为丰富换能器固有频率的研究理论，以及提供一种新的计算方法供工程人员选择，提出了计算其固有频率的有限差分法。以由径向极化的压电陶瓷圆管与金属预应力管沿径向复合而成的二元压电陶瓷复合换能器为例，建立并推导了其向振动的数学模型及其有限差分形式，给出了换能器径向振动的特征方程。利用MTALAB对计算实例的径向振动的固有频率进行编程计算，理论计算结果与已有实验结果符合很好，验证了有限差分法计算压电陶瓷复合换能器固有频率的可行性及准确性。通过仿真计算，给出了换能器径向振动固有频率与其结构尺寸的影响关系：换能器径向振动的固有频率随压电陶瓷圆管内径的增大而降低，随换能器壁厚比的增大而降低。该文所建立的换能器径向振动固有频率的有限差分法同样适用于结构形式相近的换能器及其他元器件。     

Characteristics of backing impacts on the performance of the thickness mode piezoelectric transducer

The impacts of the thickness, the specific acoustic impedance and the mechanical loss factor of the backing on the performance of the thickness mode piezoelectric transducer are systemically studied, which are focused on the effective electromechanical coupling coefficient and the mechanical quality factor near the center frequency. The results show that with contin?uous increasing of the backing thickness, the effective electromechanical coupling coefficient and the mechanical quality factor are found rapidly declined by oscillation way. With the increase of the difference value of the acoustic impedance between the backing material and the piezoelec?tric material, the effective electromechanical coupling coefficient deceases and the mechanical quality factor increases. Under condition that the thickness of the piezoelectric material is fixed, the effective electromechanical coupling coefficient is found declined with the increase of the mechanical loss factor by monotonous way. The mechanical quality factor has minimum value and the electric characteristic curve tends to be smooth in a given frequency range. The equivalent circuit theory result is in good agreement with the ones by finite element method and the experimental results. The work mentioned above provides a theoretical guidance for the design and experimental fabrication of the thickness mode piezoelectric transducer.     

一种高灵敏压电平面水声换能器

设计并制作了一种高灵敏压电平面水声换能器。该换能器敏感元件是对1-3-2型压电复合材料结构的改进,即在带基底的压电陶瓷小柱阵列间不注入聚合物,并在其上表面直接覆盖金属板,构成“带基底的压电小柱阵列+金属盖板”结构敏感元件(称为“空气填充型”敏感元件)。对“空气填充型”敏感元件的谐振频率进行了理论计算和有限元仿真,与实测结果较吻合。为便于对比性能,同时制作了同尺寸“1-3-2型压电复合材料+金属盖板”结构敏感元件(称为“聚合物填充型”敏感元件)换能器。分别对“空气填充型”和“聚合物填充型”敏感元件换能器的有效机电耦合系数、发送电压响应和接收灵敏度进行有限元仿真和实测,结果均显示,“空气填充型”敏感元件换能器具有较高的接收灵敏度,相较于“聚合物填充型”敏感元件换能器可提高21 dB。该敏感元件换能器能有效提高灵敏度,可为研制高灵敏换能器提供参考。      

Elastic guided wave propagation in a periodic array of multi-layered piezoelectric plates with finite cross-sections

In this study, we present a model study of guided wave dispersion and resonance behavior of an array of piezoelectric plates with arbitrary cross-sections. The objective of this work is to analyze the influence of the geometry of an element of a 1D-array ultrasound transducer on generating multi-resonance frequency so as to increase the frequency bandwidth of the transducers. A semi-analytical finite-element (SAFE) method is used to model guided wave propagation in multi-layered 1D-array ultrasound transducers. Each element of the array is composed of LiNbO₃ piezoelectric material with rectangular or subdiced cross-section. Four-node bilinear finite-elements have been used to discretize the cross-section of the transducer. Dispersion curves showing the dependence of phase and group velocities on the frequency, and mode shapes of propagating modes were obtained for different geometry consurations. A parametric analysis was carried out to determine the effect of the aspect ratio, subdicing, inversion layer and matching layers on the vibrational behavior of 1D-array ultrasound transducers. It was found that the geometry with subdiced cross-section causes more vibration modes compared with the rectangular section. Modal analysis showed that the additional modes correspond to lateral modes of the piezoelectric subdiced section. In addition, some modes have strong normal displacements, which may influence the bandwidth and the pressure field in front of the transducer. In addition, the dispersion curves reveal strong coupling between waveguide modes due to the anisotropy of the piezoelectric crystal. The effect of the matching layers was to cluster extensional and flexural modes within a certain frequency range. Finally, inversion layer is found to have a minor effect on the dispersion curves. This analysis may provide a means to analyze and understand the dynamic response of 1D-array ultrasound transducers.     

铌酸钾钠基无铅压电陶瓷纵振换能器*

高性能环境友好型无铅压电陶瓷及其应用是当前压电材料研究的热点之一,为了探究其在水声换能器领域的应用潜力,该文对铌酸钾钠基无铅压电陶瓷和锆钛酸铅压电陶瓷纵振式换能器进行了对比研究。依据仿真结果优化结构尺寸,制作了两种换能器样机并测试了其在空气中和水中的电声性能。测试结果表明,铌酸钾钠基无铅压电陶瓷换能器的谐振频率为35kHz,最大发送电压响应为 151dB,声源级可达 190dB,在 26kHz~67kHz 的频率范围内发送电压响应的起伏不超过±4.5dB,谐振频率处-3dB 的指向性开角约为 76°。该无铅压电陶瓷换能器具有和锆钛酸铅压电陶瓷换能器相当的发射性能,有望推动无铅压电材料在水声换能器领域的应用进程。     

Numerical technique to reduce cross-coupling in acoustical arrays

Applicability of finite element method to optimize the far-field directivity pattern of an individual element in a piezoelectric transducer array is reported. The FEM algorithm calculates the electrical potentials needed to be applied to the two elements which are immediate neighbours to the element being activated in order to minimize acoustic cross-coupling. The feasibility of the algorithm was successfully tested using a simple five elements array made of conventional PZT-5H piezoelectric ceramic material.     

Photothermoacoustic effect in solids with piezoelectric detection

The photothermoacoustic effect in solids with piezoelectric signal detection is investigated theoretically and experimentally. Analytical expressions are found for the amplitude and phase shift of the photothermoacoustic signal as a function of the thicknesses of the sample and piezoelectric transducer, the modulation frequency, and the material constants of the structure. A method is proposed for detecting the signal using a compound piezoelectric transducer. It is shown for a bilayer piezoelectric transducer that the reduced Young’s modulus and the thermal diffusion coefficient of the experimental object can be found from the amplitude-frequency and phase-frequency curves. Zh. Tekh. Fiz. 69, 1–5 (December 1999)     

Simulation of elastic wave propagation in cylindrical structures including excitation by piezoelectric transducers

The development and optimization of non-destructive testing procedures usually needs experimental data. As experiments are time-consuming and expensive to conduct, we would like to use numerical data instead. This is admissible, if the simulation describes the physical experiments accurately. A three-dimensional displacement-stress finite-difference model is presented for a piezoelectric transducer coupled to an anisotropic tube. The allocation of the displacement and stress components on a staggered grid leads to a stable scheme. A full piezoelectric model of the transducer is used, including transverse isotropy in the elastic, dielectric, and piezoelectric constants. Similar to an experiment, elastic waves are excited in the corresponding simulation by applying a voltage signal to the electrodes of the piezoelectric transducer. Predictions of the simulation model for a piezoelectric ring transducer coupled to a carbon-fibre-reinforced shell are compared to experimental results to test the validity of the numerical data.     

基于2-2型压电复合材料的新型宽频带径向振动超声换能器

本文提出了一种基于2-2型压电复合材料的新型宽频带径向振动超声换能器,它主要由内金属圆环和外压电陶瓷复合材料圆环组成.首先利用Newnham串并联理论和均匀场理论推导了2-2型压电复合材料的等效参数;其次利用解析法得到了金属圆环和径向极化压电复合陶瓷圆环径向振动的机电等效电路;最后得到了换能器的六端机电等效电路,从而得到了换能器的频率方程.接着分析了换能器共振频率和反共振频率以及有效机电耦合系数与几何尺寸、两相体积占比的关系,采用仿真软件对新型换能器的径向振动进行了数值模拟.结果表明,利用解析法得到的共振频率和反共振频率与数值模拟结果吻合较好.此外,对换能器在水下的辐射声场进行了仿真研究,结果表明新型复合材料径向换能器相比传统纯陶瓷径向换能器,发射电压响应幅值更大,工作带宽提高接近一倍,声匹配更佳.     

背衬参数对厚度模压电换能器特性的影响

系统研究了厚度模压电换能器的背衬厚度、声阻抗率及机械损耗因子对换能器振动性能影响,重点分析了在所关心频率附近的有效机电耦合系数和机械品质因数。计算结果表明,随着背衬厚度增大,换能器的有效机电耦合系数和机械品质因数均震荡减小;背衬声阻抗率与压电片声阻抗率差值增大,换能器有效机电耦合系数减小,机械品质因数增大;保持压电片厚度不变,增大背衬的机械损耗因子,换能器有效机电耦合系数单调减小,机械品质因数有极小值,在给定频率范围内电特性曲线趋于光滑。用有限元方法验证了等效电路计算方法的正确性,并对比了换能器的测试结果和计算结果。计算所得规律为厚度模压电换能器的设计和实验制作提供了理论依据。      

压电管堆式宽带换能器*

研究了一种具有管状叠堆结构的圆管换能器,其敏感元件是由纵向极化压电陶瓷单元组成的薄壁管状压电叠堆,探讨利用管状叠堆纵向和径向振动耦合实现宽带发射。利用压电柱壳振动理论推导了管堆的频率方程,分析了换能器的纵向和径向模态的振动耦合特性。在理论分析的基础上利用有限元方法对换能器的带宽和发射电压响应进行优化并研制换能器样机。测试结果表明,纵向极化的管状压电叠堆结构具有良好的发射电压响应和宽带特性,与理论及仿真结果相符。     

压电式摆动圆柱形偶极发射换能器优化研究

为了实现偶极信号有效辐射,获得足够高的信噪比,全面分析弯曲波频散,本文提出了一种新型的频带范围为0.5–5 k Hz的压电式摆动圆柱形偶极声波测井换能器,并采用有限元方法对其进行了模拟和优化设计。此外,论文还对换能器进行了实验样机制作和实验测量,将实验测量与数值模拟结果进行了对比。研究表明,提出的新型偶极声波换能器比传统换能器具有更高的发射灵敏度,尤其是在低频响应范围。本文为新型偶极声波测井换能器的研发工作奠定了基础。     

折回型纵向振子低频拼合圆柱换能器

提出一种具有小尺寸、低频、水平无指向性的新结构换能器——折回型纵向振子拼合圆柱换能器,换能器由4组共享尾质量块的折回型压电纵向振子正交布置驱动环形辐射面拼合构成。采用有限元方法对换能器进行优化设计,并制作了换能器样品。实验结果表明:换能器直径为Φ180 mm,谐振频率为1.5 kHz,最大发射电压响应为131 dB,最大声源级不低于188 dB,水平全向。该换能器具有低频、小尺寸、水平无指向性的特点,具有良好的应用前景。      

弛豫铁电单晶/压电陶瓷混合激励换能器EI北大核心CSCD

为了降低纵向换能器尺寸并提高发射带宽和发送电压响应,研究了一种弛豫铁电单晶/压电陶瓷混合激励换能器,换能器由[011]方向极化PIN-PMN-PT单晶和PZT-4压电陶瓷混合激励,利用多模态振动耦合的原理,通过单晶的32模式振动,可以灵活调整两种振子之间的驱动能力和刚度分配。首先通过四端网络法得到了换能器等效电路并计算了其谐振频率,然后利用有限元方法对换能器进行了仿真优化,最后制作了试验样机并进行了测试分析。换能器样机外径86 mm、长度80 mm,工作频带13~38 kHz,最大发送电压响应为144.9 dB,带内发送电压响应起伏小于6 dB,具有良好的宽带、小尺寸工作性能。