Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Formation and structural characterization of mercury complexes from Te(R)CH2SiMe3 (R = Ph, CH2SiMe3) and HgCl2

The reaction of HgCl₂ and Te(R)CH₂SiMe₃ [R = CH₂SiMe₃ (1), Ph (2)] in ethanol yielded a mononuclear complex [HgCl₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 3a; R = CH₂SiMe₃, 3b). The recrystallization of 3a or 3b from CH₂Cl₂ produced a dinuclear complex [Hg₂Cl₂(μ-Cl)₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 4a; R = CH₂SiMe₃, 4b). When 3a was dissolved in CH₂Cl₂, the solvent quickly removed, and the solid recrystallized from EtOH, a stable ionic [HgCl{Te(Ph)CH₂SiMe₃}₃]Cl·2EtOH (5a·2EtOH) was obtained. Crystals of [HgCl₂{Te(CH₂SiMe)₂}]·2HgCl₂·CH₂Cl₂ (6b·2HgCl₂·CH₂Cl₂) were obtained from the CH₂Cl₂ solution of 3b upon prolonged standing. The complex formation was monitored by ¹²⁵Te-, and ¹⁹⁹Hg NMR spectroscopy, and the crystal structures of the complexes were determined by single crystal X-ray crystallography.     

Synthesis, structures and preliminary biological screening of bis(diphenyl)chlorotin complexes and adducts: Ph2ClSn-CH2-R-CH2-SnClPh2, R = p-C6H4, CH2CH2

The reaction between ClCH₂-R-CH₂Cl, R = p-C₆H₄, and [Ph₃Sn]⁻Li⁺ yields Ph₃Sn-CH₂-R-CH₂-SnPh₃ (1) in high yield. The related known compound R = CH₂CH₂ (1a) is synthesized by the reaction of the di-Grignard reagent BrMg(CH₂)₄MgBr with two equivalents of Ph₃SnCl. Cleavage of a single Sn-Ph group at each tin centre of both compounds using HCl/Et₂O yields the corresponding bis-chlorostannanes Ph₂ClSn-CH₂-R-CH₂-SnClPh₂, R = (CH₂)₄ (2) and R = C₆H₄ (3), respectively. Compounds 1, 2 and 3 are crystalline solid materials and their single crystal X-ray structures are reported. In the solid state both 2 and 3 form self-assembled ladder structures involving alternating intermolecular Cl-Sn?Cl and Cl?Sn-Cl bonded chains at both ends of the distannanes with 5-coordinate tin atoms. Recrystallization of 3 from CH₂Cl₂ in the presence of DMF yields the bis-DMF adduct (4) in which no self-assembled structures were noted. Evaluation of the chlorostannanes 2 and 3 against a suite of bacteria, Staphylococcus aureus, Escherichia coli and Photobacterium phosphoreum is reported and compared to the related mono-chlorostannanes Ph₂(CH₃)SnCl and Ph₂(PhCH₂)SnCl.     

The reaction of the group-13 alkyls ER3 (E = Al, Ga, In; R = CH2t-Bu, CH2 SiMe3) with the platinum-complex [(dcpe)Pt(H)(CH2t-Bu)]

The reactions of the sterically demanding group-13 alkyls ER₃ (E = Al, Ga, In; R = CH₂t-Bu, CH₂SiMe₃) with the platinum-complex [(dcpe)Pt(H)(CH₂t-Bu)] were re-investigated. The bimetallic compounds [(dcpe)Pt(ER₂)(R)] (3: E = Ga, R = CH₂SiMe₃; 5: E = In, R = CH₂t-Bu; dcpe = bis(dicyclohexylphosphino)ethane) with direct σ(Pt-E) bonds were obtained by oxidative addition of an E-C bond to the coordinatively unsaturated fragment [(dcpe)Pt] produced in situ by thermolysis of the starting complex [(dcpe)Pt(CH₂t-Bu)(H)]. The single crystal structure determination reveals a Pt-Ga bond length of 2.376(2) Å and a Pt-In bond length of 2.608(1) Å. All new compounds were characterised by elemental analysis, ³¹P and ¹⁹⁵Pt NMR spectroscopy. Interestingly, the Pt-Ga compound 3 slowly transforms into the platinum alkyl/hydride isomer {(dcpe)Pt(μ₂-H)[CH₂Si(CH₃)₂ CH₂Ga(CH₂SiMe₃)₂]} (4) during crystallization from solution at room temperature. The X-ray single crystal structure analysis revealed both complexes 3 and 4 coexisting in the unit cell in a 1:1 relation. The inaccessibility of analytically pure samples of the Pt-Al complex {(dcpe)Pt[Al(CH₂t-Bu)₂](CH₂t-Bu)} (6), postulated as intermediate of the reaction of [(dcpe)Pt(H)(CH₂t-Bu)] with Al(CH₂t-Bu) on the basis of ³¹P and ¹⁹⁵Pt NMR data, is attributed to an enhanced tendency to isomerisation into the alkyl/hydride Pt/Al congener of 4. A brief DFT analysis of the bonding situation of the model complex [(dhpe)Pt(GaMe₂)(Me)] (1M) revealed, that the contribution of π(Pt-Ga) back-bonding is negligible.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

Mixed-metal single-molecule magnets: Syntheses, structure, and magnetic properties of [Mn8Fe4O12(O2CR)16(H2O)4] (R = CH2Cl, CH2Br, CHCl2)

Three mixed-metal single-molecule magnets containing [Mn₈Fe₄O₁₂]¹⁶⁺ cores are synthesized and characterized. The reaction of FeCl₂·4H₂O with KMnO₄ and RCOOH (R = CH₂Cl, CH₂Br) in H₂O gives [Mn₈Fe₄O₁₂(O₂CR)₁₆(H₂O)₄] (R = CH₂Cl (1), CH₂Br (2)) in yields of 43% and 40%, respectively. Treatment of complex 1 with an excess of CHCl₂COOH in CH₂Cl₂ gives [Mn₈Fe₄O₁₂(O₂CCHCl₂)₁₆(H₂O)₄]·CH₂Cl₂·10H₂O (3·CH₂Cl₂·10H₂O) in a yield of 83%. The X-ray structure analysis reveals that all three complexes consist of a trapped-valence dodecanuclear core comprising 4Mn^III, 4Fe^III, and 4Mn^IV ions. DC magnetic susceptibility and magnetization measurements indicate that all three complexes exhibit intramolecular antiferromagnetic interaction, resulting in an S = 4 ground state. In addition, frequency-dependent out-of-phase AC magnetic susceptibility signals at low temperature for complexes 1, 2, and 3 are indicative of their single-molecule magnetism behavior.     

Synthesis, characterization, and catalytic activities in syndiospecific polymerization of styrene for half-sandwich titanium complexes with non-Cp tridentate dianionic ligands MeN(CH2CR2O)2

New half-titanocenes, Cp^∗TiCl[(OCR₂CH₂)NMe(CH₂CR^′₂O)] [R,R′ = H (1), R,R′ = Me, H, (2), R,R′ = Me (3)], were prepared from Cp^∗TiCl₃ (4) with the corresponding alcohols in the presence of triethylamine. X-ray analysis shows that 1 has slightly distorted trigonal bipyramidal geometry around Ti. These complexes exhibited moderate catalytic activities for syndiospecific styrene polymerization in the presence of MAO and the activity increased in the order: 2 > 1 > 4 > 3 (at 50 °C), 1 > 2 > 4 > 3 (at 70 °C and 90 °C).     

Synthesis and coordinating properties of the facultative Sb2O- and As2O-donor ligands O{(CH2)2ER2}2 (E = Sb or As; R = Ph or Me)

The new mixed Sb₂O-donor ligands O{(CH₂)₂SbR₂}₂ (R = Ph, 1; R = Me, 2) with flexible backbones have been prepared in good yields as air-sensitive oils from reaction of NaSbR₂ with 0.5 mol equivalents of O(CH₂CH₂Br)₂ in thf solution. The As₂O-donor analogues, O{(CH₂)₂AsR₂}₂ (R = Ph, 3; R = Me, 4) were obtained similarly from LiAsPh₂ or NaAsMe₂, respectively and O(CH₂CH₂Br)₂, although ligand 4 appears to be considerably less stable with respect to C-O bond fission under some conditions than the other ligands. Using O(CH₂CH₂Cl)₂ leads only to partial substitution by the SbPh₂⁻ or AsPh₂⁻ nucleophile. These ligands behave as bidentate chelating Sb₂- or As₂-donors in the distorted tetrahedral [M(L-L)₂]BF₄ (M = Cu or Ag; L-L = 1-4) on the basis of solution ¹H and ⁶³Cu NMR spectroscopic studies, mass spectrometry and microanalyses. Crystal structures of three representative examples with Cu(I) and Ag(I) confirm the distorted tetrahedral Sb₄ or As₄ coordination at the metal and allow comparisons of geometric parameters. The crystallographic identification of an unexpected Cu(I)-Cu(I) complex, [Cu₂{Me₂As(CH₂)₂OH}₃](BF₄)₂, obtained as a by-product via C-O bond fission within ligand 4 is also reported. The distorted octahedral [RhCl₂(L-L)₂]Cl and the distorted square planar cis-[PtCl₂(L-L)] (L-L = 1 or 2) are also described. The ether O atoms are not involved in coordination to the metal ion in any of the late transition metal complexes isolated.     

Pentabenzylcyclopentadienyl molybdenum and tungsten hydrides: Syntheses, structures and electrochemistry of [MHCp(CO)2(L)] (L = CO, PMe3, PPh3)

Complexes [MHCp^Bz(CO)₂(PR₃)] (R = CH₃, M = Mo (1); M = W (2); R = Ph, M = Mo (3); Cp^Bz = C₅(CH₂Ph)₅) were prepared by thermal decarbonylation of the corresponding [MHCp^Bz(CO)₃] in the presence of trimethyl- or triphenyl-phosphine. In solution the NMR spectra of all compounds show the presence of cis and trans isomers that interconvert at room temperature. In the solid state the molecular structures obtained for compounds 1 and 2 correspond to the trans isomers, while for 3 the cis isomer is present.The electrochemistry of [MoHCp^Bz(CO)₂(PMe₃)] (1), [MoHCp^Bz(CO)₃] (5), [WHCp^Bz(CO)₃] (6), [WCp^Bz(CO)₃]₂ (7), and [MCp^Bz(CO)₃(CH₃CN)]BF₄ (8), is described. The cleavage of M-H bonds takes place upon oxidation or reduction. Cations [MCp^Bz(CO)₂L(CH₃CN)]⁺ form in solvent-assisted M-H bond breaking upon oxidation of [MHCp^Bz(CO)₂L] (L = PMe₃, CO). Reduction of [MHCp^Bz(CO)₃] gives [MCp^Bz(CO)₃]⁻ and H₂. The presence of one PMe₃ ligand lowers the reduction potential and precludes the observation of reduction waves.     

Synthesis, characterization, and substituent effects of mononuclear ruthenium complexes [RuCl(CO)(PMe3)3(CHCH-C6H4-R-p)] (R = H, CH3, OCH3, NO2, NH2, NMe2)

A series of mononuclear ruthenium complexes [RuCl(CO)(PMe₃)₃(CHCH-C₆H₄-R-p)] (R = H (2a), CH₃ (2b), OCH₃ (2c), NO₂ (2d), NH₂ (2e), NMe₂ (2f)) has been prepared. The respective products have been characterized by elemental analyses, NMR spectrometry, and UV-Vis spectrophotometry. The structures of complexes 2c and 2d have been established by X-ray crystallography. Electrochemical studies have revealed that electron-releasing substituents facilitate monometallic ruthenium complex oxidation, and the substituent parameter values (σ) show a strong linear correlation with the anodic half-wave or oxidation peak potentials of the complexes.     

New orthopalladated complexes of phosphorus ylides: Crystal structure of [Pd{CH{P(C7H6)(p-tolyl)2}COCH3}Cl{P(p-tolyl)3}]

This work reports on the preparation of the complexes [PdCl₂(Y¹)₂], [PdCl₂(Y²)₂] (Y¹ = (p-tolyl)₃PCHCOCH₃ (1a); Y² = Ph₃PCHCO₂CH₂Ph (1b)), [Pd{CHP(C₇H₆)(p-tolyl)₂COCH₃}(μ-Cl)]₂ (2a), [Pd{CHP(C₆H₄)Ph₂CO₂CH₂Ph}(μ-Cl)]₂ (2b), [Pd{CH{P(C₇H₆)(p-tolyl)₂}COCH₃}Cl(L)] (L = PPh₃ (3a), P(p-tolyl)₃ (4a)) and [Pd{CH{P(C₆H₄)Ph₂}CO₂CH₂Ph}Cl(L)] (L = PPh₃ (3b), P(p-tolyl)₃ (4b)). Orthometallation and ylide C-coordination in complexes 2a–4b are demonstrated by an X-ray diffraction study of 4a.     

Study of ferrocenyl-substituted Co2(CO)6-bispropargylic alcohol complexes as substrates for the formation of chains and macrocycles

Treatment of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = H, R² = CMe(O); R¹ = R² = CMe(O)) with LiCCCH₂OLi (prepared in situ from HCCCH₂OH and n-BuLi) affords the ferrocenyl-substituted but-2-yne-1,4-diol compounds of general formula [Fc-1-R¹-1′-{CR(OH)CCCH₂OH}] (R¹ = R = H (1a); R¹ = H, R = Me (1b); R¹ = CMe(O), R = Me (1c)) in low to high yields, respectively (where Fc = Fe(η⁵-C₅H₄)₂). In the case of the reactions of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = R² = CMe(O)), the by-products [Fc-1-R¹-1′-{CR(OH)(CH₂)₃CH₃}] (R¹ = R = H (2a); R¹ = CMe(O), R = Me (2c)) along with minor quantities of [Fc-1,1′-{CMe(OH)(CH₂)₃CH₃}₂] (3) are also isolated; a hydrazide derivative of dehydrated 2c, [1-(CMeCHCH₂CH₂CH₃)-1′-(CMeNNH-2,4-(NO₂)₂C₆H₃)] (2c′), has been crystallographically characterised. Interaction of 1 with Co₂(CO)₈ smoothly generates the alkyne-bridged complexes [Fc-1-R¹-1′-{Co₂(CO)₆-μ-η²-CR(OH)CCCH₂OH}] (R¹ = R = H (4a); R¹ = H, R = Me(4b); R¹ = CMe(O), R = Me (4c)) in good yield. Reaction of 4a with PhSH, in the presence of catalytic quantities of HBF₄ · OEt₂, gives the mono- [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂OH}] (5) and bis-substituted [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂SPh}] (6) straight chain species, while with HS(CH₂)_nSH (n = 2,3) the eight- and nine-membered dithiomacrocylic complexes [Fc-1-H-1′-{cyclo-Co₂(CO)₆-μ-η²-CH(S(CH₂)_n-)CCCH₂S-}] [n = 2 (7a), n = 3 (7b)] are afforded. By contrast, during attempted macrocyclic formation using 4b and HSCH₂CH₂OCH₂CH₂SH dehydration occurs to give [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-C(CH₂)CCCH₂OH}] (8). Single crystal X-ray diffraction studies have been reported on 2c′, 4b, 4c, 7b and 8.     

New alkenyl-substituted group 4 C-ansa-metallocene complexes. Reactivity of the substituent at the carbon ansa bridge

The allyl-substituted group 4 metal complexes [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti, R = CH₂CHCH₂, (2); R = CH₂C(CH₃)CH₂ (3); M = Zr, R = CH₂CHCH₂ (4), R = CH₂C(CH₃)CH₂ (5)] have been synthesized by the reaction of allyl ansa-magnesocene derivatives and the tetrachloride salts of the corresponding transition metal. The dialkyl complexes ] [M = Ti, R = CH₂=CHCH₂, R′ = Me (6), R′ = CH₂Ph (7); R = CH₂C(CH₃)CH₂, R′ = Me (8), R′ = CH₂Ph (9); M = Zr, R = CH₂CHCH₂, R′ = Me (10), R′ = CH₂Ph (11); R = CH₂C(CH₃)CH₂, R′ = Me (12), R′ = CH₂Ph (13)] have been synthesized by the reaction of the corresponding ansa-metallocene dichloride complexes 2-5 and two molar equivalents of the alkyl Grignard reagent. Compounds 2-5 reacted with H₂ under catalytic conditions (Wilkinson’s catalyst or Pd/C) to give the hydrogenation products [M{(R)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = CH₂CH₂CH₃ (14) or R = CH₂CH(CH₃)₂ (15); M = Zr and R = CH₂CH₂CH₃ (16) or R = CH₂CH(CH₃)₂ (17)]. The reactivity of 2-5 has also been tested in hydroboration and hydrosilylation reactions. The hydroboration reactions of 3, 4 and 5 with 9-borabicyclo[3.3.1]nonane (9-BBN) yielded the complexes [M{(9-BBN)CH₂CH(R)CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (18); M = Zr and R = H (19) or R = CH₃ (20)]. The reaction with the silane reagents HSiMe₂Cl gave the corresponding [M{ClMe₂SiCH₂CHRCH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] [M = Ti and R = H (21); M = Zr and R = H (22) or R = CH₃ (23)]. The reaction of 22 with t-BuMe₂SiOH produced a new complex [Zr{t-BuMe₂SiOSi(Me₂)CH₂CH₂CH₂CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}Cl₂] (24) through the formation of Si-O-Si bonds. On the other hand, reactivity studies of some zirconocene complexes were carried out, with the insertion reaction of phenyl isocyanate (PhNCO) into the zirconium-carbon σ-bond of [Zr{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)}₂Me₂] (25) giving [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr{Me{κ²-O,N-OC(Me)NPh}] as a mixture of two isomers 26a-b. The reaction of [Zr{(n-Bu)(H)C(η⁵-C₅Me₄)(η⁵-C₅H₄)}(CH₂Ph)₂] (27) with CO also provided a mixture of two isomers [{(n-Bu)CH(η⁵-C₅Me₄)(η⁵-C₅H₄)]}Zr(CH₂Ph){κ²-O,C-COCH₂Ph}] 28a-b. The molecular structures of 4, 11, 16 and 17 have been determined by single-crystal X-ray diffraction studies.     

Allylpalladium (II) complexes with dichalcogenoimidodiphosphinate ligands: Synthesis, structure, spectroscopy and their transformation into palladium chalcogenides

The synthesis, characterization and thermal behavior of new monomeric allylpalladium (II) complexes with dichalcogenoamidodiphosphinate anions are reported. The complexes [R = H, R′ = Prⁱ, E = S (1a); R = H, R′ = Prⁱ, E = Se (1b); R = H, R′ = Ph, E = S (1c); R = H, R′ = Ph, E = Se (1d); R = Me, R′ = Prⁱ, E = S (2a); R = Me, R′ = Prⁱ, E = Se (2b); R = Me, R′ = Ph, E = S (2c); R = Me, R′ = Ph, E = Se (2d)] have been prepared by room temperature reaction of [Pd(η³-CH₂C(R)CH₂)(acac)] (acac = acetylacetonate) with dichalcogenoimidodiphosphinic acids in acetonitrile solution. The complexes have been characterized by multinuclear NMR (¹H, ¹³C{¹H}, ³¹P{¹H}, ⁷⁷Se{¹H}), FT-IR and elemental analyses. The crystal structures of complexes 1a, 1d and 2d have been reported and they consist of a six-membered PdE₂P₂N ring (E = S for 1a and Se for 1d and 2d) and an allyl group, C₃H₄R(R = H for 1a and 1d and Me for 2d). Thermogravimetric studies have been carried out for few representative complexes. The complexes thermally decompose in argon atmosphere to leave a residue of palladium chalcogenides, which have been characterized by PXRD, SEM and EDS.     

Palladium(II)/allylpalladium(II) complexes with xanthate ligands: Single-source precursors for the generation of palladium sulfide nanocrystals

In an effort to find simple and common single-source precursors for palladium sulfide nanostructures, palladium(II) complexes, [Pd(S₂X)₂] (X = COMe (1), COⁱPr (2)) and η³-allylpalladium complexes with xanthate ligands, [(η³-CH₂C(CH₃)CR₂)Pd(S₂X)] (R = H, X = COMe (3); R = H, X = COEt (4); R = H, X = COⁱPr (5); R = CH₃, X = COMe (6)), have been investigated. The crystal structures of [Pd(S₂X)₂] (X = COMe (1), CoⁱPr (2)) and [(η³-CH₂C(CH₃)CH₂)Pd(S₂COMe)] (3) have been established by single crystal X-ray diffraction analysis. The complexes, 1, 2 and 3 all contain a square planar palladium(II) centre. In the allyl complex 3, this is defined by the two sulfurs of the xanthate and the outer carbons of the 2-methylallyl ligand, while in the complexes, 1 and 2 it is defined by the four sulfur atoms of the xanthate ligand. Thermogravimetric studies have been carried out to evaluate the thermal stability of η³-allylpalladium(II) analogues. The complexes are useful precursors for the growth of nanocrystals of PdS either by furnace decomposition or solvothermolysis in dioctyl ether. The solvothermal decomposition of complexes in dioctyl ether gives a new metastable phase of PdS which can be transformed to the more stable tetragonal phase at 320 °C. The nanocrystals obtained have been characterized by PXRD, SEM, TEM and EDX.     

Antimony(V) catecholato complexes based on 4,5-dialkylsubstituted o-benzoquinone. The spectroscopic and electrochemical studies. Crystal structure of [Ph4Sb][Ph2Sb(4,5-Cat)2]

Triphenylantimony(III) and triethylantimony(III) readily react with 4,5-(1,1,4,4-tetramethyl-butane-1,4-diyl)-o-benzoquinone to form catecholato complexes R₃Sb(4,5-Cat) (R = Ph (1), Et (2); 4,5-Cat is dianionic 4,5-(1,1,4,4-tetramethyl-butane-1,4-diyl)-catecholate). In polar solvents (CHCl₃, acetone) complex 1 transforms easily to ionic complex compound [Ph₄Sb]⁺[Ph₂Sb(4,5-Cat)₂]⁻ (3) with diphenyl-bis-[4,5-(1,1,4,4-tetramethyl-butane-1,4-diyl)-catecholato]antimony(V) complex anion. Complexes were characterized by IR, ¹H, ¹³C NMR spectroscopy, cyclic voltammometry. Molecular structure of 3·CHCl₃ was confirmed by X-ray analysis. Cyclic voltammometry of 1 and 3 shows that both complexes undergo reversible one-electron oxidation to quite stable paramagnetic o-semiquinonato species [Ph₃Sb(4,5-SQ)]⁺ and [Ph₂Sb(4,5-SQ)(4,5-Cat)] (0.75 and 0.49 V in CH₂Cl₂ vs. Ag/AgCl/KCl, respectively).     

The CO and CS bond cleavage in carbon dioxide and tolyl isothiocyanate by reactions with the Mo(0) tetraphosphine complex [Mo{meso-o-C6H4(PPhCH2CH2PPh2)2}(Ph2PCH2CH2PPh2)]

A Mo(0) complex containing a new tetraphosphine ligand [Mo(P₄)(dppe)] (1; P₄ = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂, dppe = Ph₂PCH₂CH₂PPh₂) reacted with CO₂ (1 atm) at 60 °C in benzene to give a Mo(0) carbonyl complex fac-[Mo(CO)(η³-P₄O)(dppe)] (2), where the O abstraction from CO₂ by one terminal P atom in P₄ takes place to give the dangling P(O)Ph₂ moiety together with the coordinated CO. On the other hand, reaction of 1 with TolNCS (Tol = m-MeC₆H₄) in benzene at 60 °C resulted in the incorporation of three TolNCS molecules to the Mo center, forming a Mo(0) isocyanide-isothiocyanate complex trans,mer-[Mo(TolNC)₂(η²-TolNCS)(η³-P₄S)] (4), where the S abstraction occurs from two TolNCS molecules by P₄ and dppe to give the η³-P₄S ligand and free dppeS, respectively, together with two coordinated TolNC molecules. The remaining site of the Mo center is occupied by the third TolNCS ligating at the CS bond in an η²-manner. The X-ray analysis has been undertaken to determine the detailed structures for 2 and 4.     

Synthesis and characterization of hetero-binuclear Co-Rh complexes [CpCoS2C2(B9H10)][Rh(COD)] and [CpCoSe2C2(B10H10)][Rh(COD)]

Two hetero-binuclear complexes [Cp^∗CoS₂C₂(B₉H₁₀)][Rh(COD)] (2a) and [Cp^∗CoSe₂C₂(B₁₀H₁₀)][Rh(COD)] (2b) [Cp^∗ = η⁵-pentamethylcyclopentadienyl, COD = cyclo-octa-1,5-diene (C₈H₁₂)] were synthesized by the reactions of half-sandwich complexes [Cp^∗CoE₂C₂(B₁₀H₁₀)] [E = S (1a), Se (1b)] with low valent transition metal complexes [Rh(COD)(OEt)]₂ and [Rh(COD)(OMe)]₂. Although the reaction conditions are the same, the structures of two products for dithiolato carborane and diselenolato carborane are different. The cage of the carborane in 2a was opened; However, the carborane cage in 2b was intact. Complexes 2a and 2b have been fully characterized by ¹H, ¹¹B NMR and IR spectroscopy, as well as by elemental analyses. The molecular structures of 2a and 2b have been determined by single-crystal X-ray diffraction analyses and strong metal-metal interactions between cobalt and rhodium atoms (2.6260 Å (2a) and 2.7057 Å (2b)) are existent.     

Reactivity of [Re2(CO)8(MeCN)2] with thiazoles: Hydrido bridged dirhenium compounds bearing thiazoles in different coordination modes

Reactions of the labile compound [Re₂(CO)₈(MeCN)₂] with thiazole and 4-methylthiazole in refluxing benzene afforded the new compounds [Re₂(CO)₇{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}(μ-H)] (1, R = H; 2, R = CH₃), [Re₂(CO)₆{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}₂(μ-H)] (3, R = H; 4, R = CH₃) and fac-[Re(CO)₃(Cl){η¹-NC₃H₂(4-R)S}₂] (5, R = H; 6, R = CH₃). Compounds 1 and 2 contain two rhenium atoms, one bridging thiazolide ligand, coordinated through the C(2) and N atoms and a η¹-thiazole ligand coordinated through the nitrogen atom to the same Re as the thiazolide nitrogen. Compounds 3 and 4 contain a Re₂(CO)₆ group with one bridging thiazolide ligand coordinated through the C(2) and N atoms and two N-coordinated η¹-thiazole ligands, each coordinated to one Re atom. A hydride ligand, formed by oxidative-addition of C(2)-H bond of the ligand, bridges Re-Re bond opposite the thiazolide ligand in compounds 1-4. Compound 5 contains a single rhenium atom with three carbonyl ligands, two N-coordinated η¹-thiazole ligands and a terminal Cl ligand. Treatment of both 1 and 2 with 5 equiv. of thiazole and 4-methylthiazole in the presence of Me₃NO in refluxing benzene afforded 3 and 4, respectively. Further activation of the coordinated η¹-thiazole ligands in 1-4 is, however, unsuccessful and results only nonspecific decomposition. The single-crystal XRD structures of 1-5 are reported.