密度泛函理论研究DMSO溶剂中邻-二(吡咯-2-甲酰胺基)亚苯与卤素阴离子间的超分子作用

采用混合密度泛函B3LYP方法, 在LANL2DZ水平上优化DMSO溶剂中邻-二(吡咯-2-甲酰胺基)亚苯(PFP)及其卤素阴离子复合物的几何构型, 从几何结构参数、电荷布居、前线轨道、结合能以及热力学参数等角度探讨复合物形成过程中主体分子的构象变化以及主客体间的超分子作用. 研究结果表明, 邻-二(吡咯-2-甲酰胺基)亚苯识别卤素阴离子是一个自发过程. 复合阴离子过程中, 两者的前线轨道发生作用, 电子容易从卤素阴离子的HOMO向主体分子的LUMO转移. 在所形成的四种复合物PFP:X^－(X^－＝F^－, Cl^－, Br^－, I^－)中, 以PFP:F^－最稳定, 与文献报道邻-二(吡咯-2-甲酰胺基)亚苯识别卤素阴离子能力的实验结果相一致. 设计合成含多个吡咯酰胺基团、并能形成合适“杯口”大小的主体化合物, 将增强对卤素阴离子的识别能力.     

杯[4]吡咯-阴离子体系相互作用的理论研究——杯[4]吡咯-卤素阴离子体系的密度泛函研究

用密度泛函B3LYP/LANL2DZ方法对自由杯[4]吡咯的最低能量构象和卤素阴离子-杯[4]吡咯复合物进行了计算研究.结果表明,杯[4]吡咯与卤素离子能通过彼此间的相互作用形成复合物,并且这种相互作用在本质上应为分子间的氢键相互作用;杯[4]吡咯与卤素阴离子形成的复合物在构型变化、电荷转移、前线轨道及其作用方式、成键布居以及能量和热力学参数等方面均按元素周期律有规律地变化,杯[4]吡咯与卤素阴离子间的相互作用沿元素周期依次减少.     

新型手性不对称脲石胆酸分子裂缝的设计合成

以刚性的石胆酸甲酯为骨架, 手性不对称脲为侧链, 通过三光气桥连, 设计合成了一类新型的手性分子裂缝. 7个分子裂缝均为新化合物, 其结构均经¹H NMR, IR, MS和元素分析确证, 并且考察了其对卤素阴离子Cl^－, Br^－, I^－的识别性能. 初步的实验结果表明, 这类分子裂缝不仅可与所考察的卤素阴离子形成1∶1型超分子配合物, 而且对卤素阴离子具有良好的识别选择性.     

β-卤素取代对杯[4]吡咯构象及主-客体相互作用的影响II. 密度泛函理论研究

应用密度泛函理论对杯[4]吡咯及卤素取代杯[4]吡咯模型分子的自由主体以及其卤素离子复合物体系进行计算研究. 结果表明, 杯[4]吡咯β位被卤素拉电子基团取代后, 主体分子的构象特征受吡咯单元的偶极影响; β-卤素取代导致了杯[4]吡咯对卤素离子的结合作用增强, 且当β位为氯取代时, 杯[4]吡咯对卤素离子的结合能力最强. 并从振动光谱、NBO电荷布居、相互作用的前线轨道、“活性”构象的偶极矩和Mulliken成键布居等方面阐述β-卤素取代对杯[4]吡咯与卤素离子之间的主-客体相互作用的影响.     

芳酰基硫脲受体的合成及对阴离子识别研究

设计合成了3种芳酰基硫脲受体分子. 利用紫外-可见吸收光谱考察了其与F^－, Cl^－, Br^－, AcO^－, HSO₄^－, H₂PO₄^－等阴离子的作用. 结果表明该类受体分子与阴离子形成氢键配合物. 加入F^－, AcO^－时, 溶液立刻由无色变为黄色, 而加入其它阴离子则无变化, 从而实现对这两种阴离子的裸眼识别. 结果表明受体分子与阴离子间形成1∶1型的配合物. ¹H NMR滴定及质子溶剂效应为受体分子与阴离子间的氢键作用本质提供了直接依据.     

杯[4]二吡咯与卤素阴离子相互作用的密度泛函理论研究

采用密度泛函B3LYP方法, 在6\|31G*/LANL2DZ水平上对杯[4]二吡咯主体分子及其与卤素阴离子形成的复合物进行研究.  结果表明, 杯[4]二吡咯可与卤素阴离子相互作用形成具有较高对称性的复合物, 其8个吡咯NH基团上的H原子均可以和卤素阴离子形成氢键; 杯[4]二吡咯与卤素阴离子结合能力大小的顺序为F- >Cl- >Br- > I-.  振动光谱、 电荷分布以及前线轨道计算结果表明, 杯[4]二吡咯与卤素阴离子相互作用的本质为氢键, 经BSSE校正的结合能与电荷转移程度、 N-H键键长和N-H伸缩振动频率变化呈线性关系.      

带状修饰的杯[4]吡咯对卤素阴离子识别的研究

应用分子力学／分子动力学模拟方法研究了4种带状修饰的杯[4]吡咯对卤素阴离子的识别作用.模拟结果表明, 加入带状修饰链和调节链长可以增强对某种特殊卤素阴离子的识别, 在这个过程中, 卤素阴离子与杯[4]吡咯NH上的氢形成的多氢键使主体分子与阴离子形成稳定复合物, 同时带状修饰链通过改变杯吡咯空腔大小影响主体分子与卤素阴离子的氢键相互作用, 从而调节了对不同阴离子的识别能力.     

β-卤素取代对杯[4]吡咯构象及主-客体相互作用的影响(Ⅰ)——分子力学/分子动力学研究

通过分子力学/分子动力学模拟,获得4种游离杯[4]吡咯以及杯[4]吡咯-卤素阴离子主-客体复合物的稳定构象,用偶极子模型解释了β位卤素取代对游离杯[4]吡咯稳定构象、杯[4]吡咯-卤素阴离子复合物的结构及其结合能的影响,指出造成这些影响的主要因素是不同卤素取代导致杯[4]吡咯的吡咯环基团偶极大小不同.计算了不同杯[4]吡咯与卤素阴离子的结合能,当杯[4]吡咯β位上的H原子被卤素阴离子取代后,杯[4]吡咯对阴离子的识别能力加强.     

杯[4]吡咯-卤素、铵离子复合物的理论研究

采用密度泛函理论的M06-2X/6-31G(d, p)方法对杯[4]吡咯(CP)与卤素离子(X^-=F^-, Cl^-, Br^-)及卤素-铵根离子对的各种可能组装体系进行了系统研究. 详细讨论了各体系的结构、结合能、自然键轨道分析(NBO)和Multiwfn波函数分析的情况. 结果显示杯[4]吡咯与卤素阴离子的相互作用主要是氢键, 波函数分析显示在CPCl-和CP-Br-复合物中长程范德华力和空间位阻作用也明显存在. 杯[4]吡咯能与卤素-铵根离子形成稳定的复合物, 主要通过氢键作用、阴-阳离子的静电作用以及阳离子-π相互作用.从理论上探讨了杯[4]吡咯与离子或离子对的2:1组装体系,但相对于1:1组装体系来讲, 2:1体系并不占优势.本文结果进一步表明, 杯[4]吡咯不仅是一种阴离子受体,而且也是一种良好的离子对受体,尤其是对涉及氟离子的客体,更是如此.     

茜素与AcO~-阴离子的超分子作用及紫外-可见吸收光谱的理论研究

采用密度泛函方法(DFT/B3LYP),在6-31+G水平上分别优化茜素以及AcO-阴离子复合物的几何构型.从几何结构参数、电荷布居和前线轨道能量等方面探讨了复合物形成过程中主体分子的构象变化,以及主客体间的超分子作用.用含时密度泛函方法(TD-B3LYP/6-31+G)分别计算了主体分子以及与阴离子形成复合物的紫外-可见吸收光谱.根据所得复合物的特征吸收峰波长红移情况,从理论上较好地解释了主体分子通过氢键与AcO-形成稳定阴离子复合物的实验事实.结果表明,乙腈溶剂中茜素对AcO-具有较强的超分子作用和选择性识别能力.     

LDHs主体层板与卤素阴离子超分子作用的理论研究

构建了LDHs主客体作用模型, 采用混合密度泛函B3LYP方法, 在6-31G(d)水平上进行结构优化和频率分析, 然后分别用6-31G(d)和6-311++G(d, p)基组计算主客体相互作用能, 从几何参数、电荷布居、前线轨道、能量以及热力学参数等角度探讨LDHs主体层板与卤素阴离子(F?, Cl?)间的超分子作用. 计算结果表明, LDHs主体层板复合卤素阴离子是一个自发过程. LDHs主客体间存在着较强的超分子作用, 主要包括静电和氢键作用, 相互作用能分别为?592.45和?444.01 kJ·mol?1. LDHs主体层板与卤素阴离子的前线轨道发生作用, 电子容易从卤素阴离子的HOMO向层板的LUMO转移, 形成的组装产物Mg6Al(OH)14+?F?比Mg6Al(OH)14+?Cl?稳定.     

Study of the orbital hardness and the Kohn‐Sham radius on single monoatomic anions

Within the Kohn‐Sham framework and for a series of single charged monatomic anions, the orbital hardness is calculated as a change in the frontier eigenvalue, which is equivalent to integrate the local hardness function obtained through the derivative of the KS effective potential respect to the occupation number. The local hardness function is composed by the sum of two terms with opposite sign that describe the electrostatic and exchange‐correlation interactions. Moreover, it is found that, at the KS radii, the last term vanishes with the result that the orbital hardness of the anion is a measure of the electrostatic potential exerted by the frontier density at the KS radii. A further derivation leads to establish a direct relationship between hardness and the inverse of the KS radii. The polarizability of the anion is also examined by computing it from the volume of a sphere having the KS radii. These results show that anions from the halide group are hard and little polarizable, whereas anions from the alkali group are soft and highly polarizable. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Chloride‐Anion‐Templated Synthesis of a Strapped‐Porphyrin‐Containing Catenane Host System

The synthesis, structure and anion‐recognition properties of a new strapped‐porphyrin‐containing [2]catenane anion host system are described. The assembly of the catenane is directed by discrete chloride anion templation acting in synergy with secondary aromatic donor–acceptor and coordinative pyridine–zinc interactions. The [2]catenane incorporates a three‐dimensional, hydrogen‐bond‐donating anion‐binding pocket; solid‐state structural analysis of the catenane?chloride complex reveals that the chloride anion is encapsulated within the catenane’s interlocked binding cavity through six convergent CH????Cl and NH???Cl hydrogen‐bonding interactions and solution‐phase ¹H NMR titration experiments demonstrate that this complementary hydrogen‐bonding arrangement facilitates the selective recognition of chloride over larger halide anions in DMSO solution.     

类水滑石主体层板与客体CO2-3、H2O间的超分子作用

通过构建类水滑石双层计算模型, 采用混合密度泛函B3LYP/6-31G(d)//B3LYP/3-21G方法计算类水滑石(LDHs-CO3-yH2O)的结构与能量, 探讨LDHs限域空间中客体阴离子及水分子的分布形态以及主客体超分子作用. 计算结果表明, 客体阴离子与水分子以平行层板的方式存在于水滑石层间. 主客体发生作用时, CO2-3的HOMO轨道向层板的LUMO轨道转移电子. 所形成的LDHs-CO3主客体作用要强于LDHs-F以及LDHs-Cl, 与其离子交换性能相一致. 水滑石去水结构(LDHs-CO3)水合过程, 氢键作用较静电作用更占优势, 并且layer-water型氢键要强于anion-water 型氢键. 此外, 水合能计算表明LDHs水合具有一定的饱和量.     

Anion‐Induced Shuttling of a Naphthalimide Triazolium Rotaxane

The anion‐templated synthesis of a rotaxane structure, incorporating the new naphthalimide triazolium motif, is described and the interlocked host shown to exhibit selective, uni‐directional, anion‐induced shuttling. Initial pseudorotaxane investigations demonstrate the ability of a naphthalimide triazolium threading component to form interpenetrated assemblies with counter‐anion‐dependent co‐conformations. ¹H NMR studies reveal that the shuttling behaviour of the analogous rotaxane host system is controlled by selective anion binding and by the nature of the solvent conditions. Complete macrocycle translocation only occurs upon the recognition of the smaller halide anions (chloride and bromide). The rotaxane solid‐state crystal structure in the presence of chloride is in agreement with the solution‐phase co‐conformation. The sensitivity of the axle naphthalimide absorbance band to the position of the macrocycle component within the interlocked structure enabled the molecular motion to be observed by UV/Vis spectroscopy, and the chloride‐induced shuttling of the rotaxane was reversed upon silver hexafluorophosphate addition.     

Neutral acyclic anion receptor with thiadiazole spacer: halide binding study and halide-directed self-assembly in the solid state

A halide binding study of a newly synthesized neutral acyclic receptor LH(2) with a thiadiazole spacer has been methodically performed both in solution and in the solid state. Crystal structure analysis of the halide complexes elucidate the fact that fluoride forms an unusual 1:1 hyrogen-bonded complex with monodeprotonated receptor, whereas in the case of other congeners, such as chloride and bromide, the receptor binds two halide anions along with formation of a halide-bridged 1D polymeric chain network by participation of N-H···X(-) and aromatic C-H···X(-) hydrogen-bonding (where X = Cl and Br) interactions. The presence of a rigid thiadiazole spacer presumably opens up enough space for capturing two halide anions by a single receptor molecule, where the coordinated -NH protons are pointed in the same direction with respect to the spacer and eventually favor formation of halide (Cl(-) and Br(-)) induced polymeric architecture, although no obvious chloride- or bromide-directed polymeric assembly is found in solution. A significant red shift of 243 nm in the absorption spectra of LH(2) was solely observed in the presence of excess fluoride anion, which enables LH(2) as an efficient colorimetric sensor for optical detection of fluoride anion (yellow to blue). Furthermore, spectroscopic titration experiments with increasing equivalents of fluoride anion suggest formation of a H-bonded complex with subsequent stepwise deprotonation of two N-H groups, which can be visually monitored by a change in color from yellow to blue via pink.