Rhenium oxohalides: synthesis and crystal structures of ReO3Cl(THF)2, ReOCl4(THF), Re2O3Cl6(THF)2, and Re2O3Cl6(H2O)2

Convenient methods to prepare solvated rhenium oxochlorides are described; these compounds should serve as useful starting materials for rhenium chemistry. Treatment of perrhenic acid, HReO(4), with chlorotrimethylsilane or with thionyl chloride, followed by addition of tetrahydrofuran, forms the new oxochloride complexes ReO(3)Cl(THF)(2) and ReOCl(4)(THF), respectively. Small amounts of two dinuclear oxochlorides, which evidently resulted from adventitious hydrolysis, were also isolated: Re(2)O(3)Cl(6)L(2), where L = THF or H(2)O. All four compounds were characterized by X-ray crystallography. The rhenium(vii) complex ReO(3)Cl(THF)(2) adopts a distorted octahedral geometry in which the three oxo ligands are in a facial arrangement; the rhenium(vi) complex ReOCl(4)(THF) adopts a trans octahedral structure. The two dinuclear rhenium(vi) compounds both have a single, nearly linear, bridging oxo group; on each Re center, the three terminal chlorides adopt a mer arrangement, and the terminal oxo and the coordinated Lewis base are mutually trans. The water ligand in the aqua complex is hydrogen bonded to nearby THF molecules. IR data are given.     

Heterobimetallic bismuth-transition metal salicylate complexes as molecular precursors for ferroelectric materials. Synthesis and structure of Bi(2)M(2)(sal)(4)(Hsal)(4)(OR) (4) (M = Nb,Ta; R = CH(2)CH(3), CH(CH(3))(2)), Bi(2)Ti(3)(sal)(8)(Hsal)(2), and Bi(2)Ti(4)(O(i)Pr)(sal)(10)(Hsal) (sal = O(2)CC(6)H(4)-2-O; Hsal = O(2)CC(6)H(4)-2-OH)

The reactions between triphenylbismuth, salicylic acid, and the metal alkoxides M(OCH(2)CH(3))(5) (M = Nb, Ta) or Ti[OCH(CH(3))(2)](4) have been investigated under different reaction conditions and in different stoichiometries. Six novel heterobimetallic bismuth alkoxy-carboxylate complexes have been synthesized in good yield as crystalline solids. These include Bi(2)M(2)(sal)(4)(Hsal)(4)(OR)(4) (M = Nb, Ta; R = CH(2)CH(3), CH(CH(3))(2)), Bi(2)Ti(3)(sal)(8)(Hsal)(2), and Bi(2)Ti(4)(O(i)Pr)(sal)(10)(Hsal) (sal = O(2)CC(6)H(4)-2-O; Hsal = O(2)CC(6)H(4)-2-OH). The complexes have been characterized spectroscopically and by single-crystal X-ray diffraction. Compounds of the group V transition metals contain metal ratios appropriate for precursors of ferroelectric materials. The molecules exhibit excellent solubility in common organic solvents and good stability against unwanted hydrolysis. The nature of the thermal decomposition of the complexes has been explored by thermogravimetric analysis and powder X-ray diffraction. We have shown that the complexes are converted to the corresponding oxide by heating in an oxygen atmosphere at 500 degrees C. The mass loss of the complexes, as indicated by thermogravimetric analysis, and the resulting unit cell parameters of the oxides are consistent with the formation of the desired heterobimetallic oxide. The complexes decomposed to form the bismuth-rich phases Bi(4)Ti(3)O(12) and Bi(5)Nb(3)O(15) as well as the expected oxides BiMO(4) (M = Nb, Ta) and Bi(2)Ti(4)O(11).     

Tuning the redox potentials of dinuclear tungsten oxo complexes [(Cp*W(4,4'-R,R-2,2'-bpy)(mu-O))2][PF6]2 toward photochemical water splitting

A series of novel dinuclear tungsten(IV) oxo complexes with disubstituted 4,4'-R,R-2,2'-bipyridyl (R(2)bpy) ligands of the type [(Cp*W(R(2)bpy)(mu-O))(2)][PF(6)](2) (R=NMe(2), tBu, Me, H, Cl) was prepared by hydrolysis of the tungsten(IV) trichloro complexes [Cp*W(R(2)bpy)Cl(3)]. Cyclic voltammetry measurements for the tungsten(IV) oxo compounds provided evidence for one reversible oxidation and two reversible reductions leading to the oxidation states W(V)W(IV), W(IV)W(III) and W(III)W(III). The corresponding complexes [(Cp*W(R(2)bpy)(mu-O))(2)](n+) [PF(6)](n) (n=0 for R=Me, tBu, and 1, 3 for both R=Me) could be isolated after chemical oxidation/reduction of the tungsten(IV) oxo complexes. The crystal structures of the complexes [(Cp*W(R(2)bpy)(mu-O))(2)][BPh(4)](2) (R=NMe(2), tBu) and [(Cp*W(Me(2)bpy)(mu-O))(2)](n+)[PF(6)](n) (n=0, 1, 2, 3) show a cis geometry with a puckered W(2)O(2) four-membered ring for all compounds except [(Cp*W(Me(2)bpy)(mu-O))(2)] which displays a trans geometry with a planar W(2)O(2) ring. Examining the interaction of these novel tungsten oxo complexes with protons, we were able to show that the W(IV)W(IV) complexes [(Cp*W(R(2)bpy)(mu-O))(2)][PF(6) (-)](2) (R=NMe(2), tBu) undergo reversible protonation, while the W(III)W(III) complexes [(Cp*W(R(2)bpy)(mu-O))(2)] transfer two electrons forming the W(IV)W(IV) complex and molecular hydrogen.     

Molecular precursors for ferroelectric materials: synthesis and characterization of Bi2M2(mu-O)(sal)4(Hsal)4(OEt)2 and BiM4(mu-O)4(sal)4(Hsal)3(O(i)Pr)4 (sal = O2CC6H4O,Hsal = O2CC6H4OH) (M = Nb,Ta)

Reactions between triphenyl bismuth, salicylic acid, and niobium or tantalum ethoxide have been explored. Four new coordination complexes incorporating bismuth and the group 5 metals niobium or tantalum have been synthesized and characterized spectroscopically, by elemental analysis, and by single crystal X-ray diffraction. The new complexes are Bi(2)M(2)(mu-O)(sal)(4)(Hsal)(4)(OEt)(2) (1a, M = Nb; 1b, M = Ta) and BiM(4)(mu-O)(4)(sal)(4)(Hsal)(3)(O(i)Pr)(4) (sal = O(2)CC(6)H(4)-2-O, Hsal = O(2)CC(6)H(4)-2-OH) (2a, M = Nb; 2b, M = Ta). Complexes 1a and 1b are isomorphous, as are 2a and 2b. The thermal and hydrolytic decomposition of 1a has been explored by DT/TGA and powder X-ray diffraction, while scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) were used to characterize the morphology and composition of the oxides. The heterobimetallic molecules are completely converted to the amorphous bimetallic oxide by heating to 500 degrees C in air. Decomposition of 1a or 1b at 650 degrees C produces the metastable high temperature form of BiNbO(4) as the major crystalline oxide phase. Heating samples of 1a to 850 degrees C favors conversion of the materials to the low temperature phase as well as disproportionation into Bi(5)Nb(3)O(15) and Nb(2)O(5). Thermal decomposition of 1a and 1b produces porous oxides, while hydrolytic decomposition of the complexes has been shown to produce nanometer scale bimetallic oxide particles. The potential of the complexes to act as single-source precursors for ferroelectric materials is considered.     

Synthons for coordinatively unsaturated complexes of tungsten, and their use for the synthesis of high oxidation-state silylene complexes

Reduction of Cp*WCl4 afforded the metalated complex (eta6-C5Me4CH2)(dmpe)W(H)Cl (1) (Cp* = C5Me5, dmpe = 1,2-bis(dimethylphosphino)ethane). Reactions with CO and H(2) suggested that 1 is in equilibrium with the 16-electron species [Cp(dmpe)WCl], and 1 was also shown to react with silanes R2SiH2 (R2 = Ph2 and PhMe) to give the tungsten(IV) silyl complexes Cp*(dmpe)(H)(Cl)W(SiHR2) (6a, R2 = Ph2; 6b, R2 = PhMe). Abstraction of the chloride ligand in 1 with LiB(C6F5)4 gave a reactive species that features a doubly metalated Cp ligand, [(eta7-C5Me3(CH2)2)(dmpe)W(H)2][B(C6F5)4] (4). In its reaction with dinitrogen, 4 behaves as a synthon for the 14-electron fragment [Cp*(dmpe)W]+, to give the dinuclear dinitrogen complex ([Cp*(dmpe)W]2(micro-N2)) [B(C6F5)4]2 (5). Hydrosilanes R2SiH2 (R2 = Ph2, PhMe, Me2, Dipp(H); Dipp = 2,6-diisopropylphenyl) were shown to react with 4 in double Si-H bond activation reactions to give the silylene complexes [Cp*(dmpe)H2W = SiR2][B(C6F5)4] (8a-d). Compounds 8a,b (R2 = Ph2 and PhMe, respectively) were also synthesized by abstraction of the chloride ligands from silyl complexes 6a,b. Dimethylsilylene complex 8c was found to react with chloroalkanes RCl (R = Me, Et) to liberate trialkylchlorosilanes RMe2SiCl. This reaction is discussed in the context of its relevance to the mechanism of the direct synthesis for the industrial production of alkylchlorosilanes.     

Synthesis and catalytic epoxidation activity with TBHP and H2O2 of dioxo-, oxoperoxo-, and oxodiperoxo molybdenum(VI) and tungsten(VI) compounds containing monodentate or bidentate phosphine oxide ligands: crystal structures of WCl2(O)2(OPMePh2)2, WCl2(O)(O2)(OPMePh2)2, MoCl2(O)2dppmO2.C4H10O, WCl2(O)2dppmO2, Mo(O)(O2)2dppmO2, and W(O)(O2)2dppmO2

The dioxo tungsten(VI) and molybdenum(VI) complexes WCl2(O)2(OPMePh2)2, WCl2(O)2dppmO2, and MoCl2(O)2dppmO2, the oxoperoxo compounds WCl2(O)(O2)(OPMePh2)2, WCl2(O)(O2)dppmO2, and MoCl2(O)(O2)dppmO2, and the oxodiperoxo complexes, W(O)(O2)2dppmO2 and Mo(O)(O2)2dppmO2 have been prepared and characterized by IR spectroscopy, 31P NMR spectroscopy, elemental analysis, and X-ray crystallography. The structural and X-ray crystallographic data of compounds WCl2(O)2(OPMePh2)2, WCl2(O)(O2)(OPMePh2)2, MoCl2(O)2dppmO2.4H10O, WCl2(O)2dppmO2, Mo(O)(O2)2dppmO2, and W(O)(O2)2dppmO2 are also detailed. All complexes were studied as catalysts for cis-cyclooctene epoxidation in the presence of tert-butyl hydroperoxide (TBHP) or H2O2 as an oxidant. The Mo-based catalysts showed a superior reactivity over W-based catalysts in the TBHP system. On the other hand, in the H2O2 system, the W-based catalysts (accomplishing nearly 100% epoxidation of cyclooctene in 6 h) are more reactive than the Mo catalysts (<45% under some conditions). Various solvent systems have been investigated, and ethanol is the most suitable solvent for the H2O2 system.     

Mixed guanidinato/alkylimido/azido tungsten(VI) complexes: synthesis and structural characterization

A series of structurally characterized new examples of pentacoordinated heteroleptic tungsten(VI)-guanidinates complexes are described. Starting out from [WCl(2)(Nt-Bu)(2)py(2)] (1) (py = pyridine) and the guanidinato transfer reagents (TMEDA)Li[(Ni-Pr)(2)CNi-Pr(2)] (2a) (TMEDA = N,N,N',N'-tetramethylethylendiamine) and [Li(NC(NMe(2))(2))](x) (2b), the title compounds [WCl(Nt-Bu)(2)[(Ni-Pr)(2)CNi-Pr(2)]] (3) and [W(Nt-Bu)(2)Cl{NC(NMe(2))(2)]](2) (6) were selectively formed by the elimination of one mole equivalent of lithium chloride. The isopropyl-substituted guanidinato ligand [(Ni-Pr)(2)CNi-Pr(2)} of monomeric 3 is N(1),N(3)-bonded to the tungsten center. The introduction of the sterically less-demanding tetramethyl guanidinato ligand [NC(NMe(2))(2)] expectedly leads to dimeric 6 exhibiting a planar W(2)N(2) ring with the guanidinato group bridging the two tungsten centers via the deprotonated imino N-atom. The remaining chloro ligand of 3 is labile and can be substituted by sterically less-crowded groups such as dimethylamido or azido that yield the presumably monomeric compounds 4 and 5, respectively. A similar treatment of 6 with sodium azide yields the dimeric azido derivative 7. Reacting [WCl(2)(Nt-Bu)(2)py(2)] directly with an excess of sodium azide leads to the dimeric bis-azide species [[W(Nt-Bu)(2)(N(3))(mu(2)-N(3))py](2)]. The new compounds were fully characterized by single-crystal X-ray diffractometry (except 2, 4, and 5), NMR, IR, and mass-spectroscopy as well as elemental analysis. Compound 5, [W(N(3))(Nt-Bu)(2)[(Ni-Pr)(2)CNi-Pr(2)]], can be sublimed at 80 degrees C, 1 Pa.     

Oxo transfer reactions mediated by bis(dithiolene)tungsten analogues of the active sites of molybdoenzymes in the DMSO reductase family: comparative reactivity of tungsten and molybdenum.

The discovery of tungsten enzymes and molybdenum/tungsten isoenzymes, in which the mononuclear catalytic sites contain a metal chelated by one or two pterin-dithiolene cofactor ligands, has lent new significance to tungsten-dithiolene chemistry. Reaction of [W(CO)(2)(S(2)C(2)Me(2))(2)] with RO(-) affords a series of square pyramidal desoxo complexes [W(IV)(OR')(S(2)C(2)Me(2))(2)](1)(-), including R' = Ph (1) and Pr(i)() (3). Reaction of 1 and 3 with Me(3)NO gives the cis-octahedral complexes [W(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-), including R' = Ph (6) and Pr(i)() (8). These W(IV,VI) complexes are considered unconstrained versions of protein-bound sites of DMSOR and TMAOR (DMSOR = dimethylsulfoxide reductase, TMAOR = trimethylamine N-oxide reductase) members of the title enzyme family. The structure of 6 and the catalytic center of one DMSO reductase isoenzyme have similar overall stereochemistry and comparable bond lengths. The minimal oxo transfer reaction paradigm thought to apply to enzymes, W(IV) + XO --> W(VI)O + X, has been investigated. Direct oxo transfer was demonstrated by isotope transfer from Ph(2)Se(18)O. Complex 1 reacts cleanly and completely with various substrates XO to afford 6 and product X in second-order reactions with associative transition states. The substrate reactivity order with 1 is Me(3)NO > Ph(3)AsO > pyO (pyridine N-oxide) > R(2)SO > Ph(3)PO. For reaction of 3 with Me(3)NO, k(2) = 0.93 M(-)(1) s(-)(1), and for 1 with Me(2)SO, k(2) = 3.9 x 10(-)(5) M(-)(1) s(-)(1); other rate constants and activation parameters are reported. These results demonstrate that bis(dithiolene)W(IV) complexes are competent to reduce both N-oxides and S-oxides; DMSORs reduce both substrate types, but TMAORs are reported to reduce only N-oxides. Comparison of k(cat)/K(M) data for isoenzymes and k(2) values for isostructural analogue complexes reveals that catalytic and stoichiometric oxo transfer, respectively, from substrate to metal is faster with tungsten and from metal to substrate is faster with molybdenum. These results constitute a kinetic metal effect in direct oxo transfer reactions for analogue complexes and for isoenzymes provided the catalytic sites are isostructural. The nature of the transition state in oxo transfer reactions of analogues is tentatively considered. This research presents the first kinetics study of substrate reduction via oxo transfer mediated by bis(dithiolene)tungsten complexes.     

Organic nitriles from acid chlorides: an isovalent N for (O)CL exchange reaction mediated by a tungsten nitride complex

Nitride NW(N[i-Pr]Ar)3 (1, Ar = 3,5-C6H3Me2) was synthesized in two steps from known NW(O-t-Bu)3 (41% overall yield). Complex 1 is the tungsten congener of NMo(N[i-Pr]Ar)3, a known molecule that has been synthesized using N2 as the nitrido nitrogen source, but which undergoes no reaction with pivaloyl chloride. Compound 1 undergoes metathesis with pivaloyl chloride at 25 degrees C to form the corresponding nitrile in 97% yield. Another substrate examined in this work was the labeled acid chloride 1-Ad13C(O)Cl (Ad = adamantyl). The "(O)Cl" moiety is transferred to tungsten forming an oxo-chloride, (Ar[i-Pr]N)3W(O)Cl (3), as the final tungsten product; both 1 and 3 were characterized structurally by X-ray diffraction. An intermediate observed in the nitrile-forming reaction was characterized spectroscopically to be a tungsten acylimido complex. The latter assignment was substantiated by the synthesis and structural characterization of the compound (Ar[i-Pr]N)3W(NC(O)CF3)(O2CCF3) (2m). In addition, density functional theory calculations performed using ADF lent insight into the thermochemistry of the overall process.     

Mononuclear oxovanadium complexes of tris(2-pyridylmethyl)amine

Mononuclear oxovanadium(IV) and dioxovanadium(V) complexes of tris(2-pyridylmethyl)amine (tpa) have been prepared for the first time. Crystal structure determinations of three oxovanadium(IV) complexes, [VO(SO4)(tpa)], [VOCl(tpa)]PF6, or [VOBr(tpa)]PF6, and a dioxovanadium(v) complex [V(O)2(tpa)]PF6 disclosed that the tertiary nitrogen of the tpa ligand always occupies the trans-to-oxo site. The structures of an oxo-peroxo complex [VO(O2)(tpa)]Cl that was prepared previously and of a mu-oxo vanadium(III) complex [{VCl(tpa)}2(mu-O)](PF6)2 have also been determined. The tertiary nitrogen is located at a trans site to the peroxo and chloride ligands, respectively. The total sums of the four V-N bond lengths from the tpa ligand are remarkably similar among the six complexes, indicating that the vanadium oxidation states become less influential in tpa bonding due primarily to the coordination of electron-donating oxo ligand(s). Absorption spectra of [VOCl(tpa)]+ in acetonitrile showed a significant change upon addition of p-toluenesulfonic acid and HClO4, but not on addition of benzoic acid. Protonation at the oxo ligand by the former two acids is suggested. Cyclic voltammetric studies in acetonitrile verified the proton-coupled redox behavior of the V(III)/V(IV) process involving the oxo ligand for the first time. From the dependence of the added p-toluenesulfonic acid to the CV, redox potentials for the following species have been estimated: [V(IV)OCl(tpa)]+/[V(III)OCl(tpa)](E1/2=-1.59 V vs. Fc+/Fc), [V(IV)(OH)Cl(tpa)]2+/[V(III)(OH)Cl(tpa)]+(Epc=-1.34 V), [V(IV)(OH2)Cl(tpa)]3+/[V(III)(OH2)Cl(tpa)]2+(Epa=-0.49 V), and [V(IV)Cl2(tpa)]2+/[V(III)Cl2(tpa)]+(E1/2=-0.89 V). The reduction of [V(V)(O)2(tpa)]+ in 0.05 M [(n-Bu)4N]PF6 acetonitrile showed a major irreversible reduction wave V(V)/(IV) at -1.48 V. The metal reduction potentials of the oxovanadium(IV) and dioxovanadium(V) species are very close, reinforcing the significant influence of the oxo ligand(s).     

Organobismuth compounds with the pincer ligand 2,6-(Me2NCH2)2C6H3: monoorganobismuth(III) carbonate, sulfate, nitrate, and a diorganobismuthenium(III) salt

The reaction of RBiCl(2) (1) [R = 2,6-(Me(2)NCH(2))(2)C(6)H(3)] with Na(2)CO(3) or Ag(2)SO(4) (1 : 1 molar ratio) gave RBiCO(3) (2) and RBiSO(4) (3), respectively. RBi(NO(3))(2) (4) was obtained from RBiCl(2) and AgNO(3) (1 : 2 molar ratio). The ionic complex [R(2)Bi][W(CO)(5)Cl] (6) was obtained from R(2)BiCl (5) and W(CO)(5)(THF), following an unusual chlorine transfer from bismuth to tungsten. Compounds 2-4 are partially soluble in water. The molecular structures of 2·0.5CH(2)Cl(2), 3, 4·H(2)O and 6 were established by single-crystal X-ray diffraction. The carbonate 2 and the sulfate 3 exhibit a polymeric structure based on bridging oxo anions, while for the compound 4 dimer associations are formed, with both bridging and terminal nitrate anions. Dimer associations, based on weak Cl···H interactions between the cation and the anion, were found in the crystal of 6.     

Synthesis and characterisation of tungsten(VI) oxo-salicylate complexes for use in the chemical vapour deposition of self-cleaning films

Tungsten(VI) oxo-salicylate complexes were prepared in moderate yield (47 to 63%) by the reactions of WOCl4 and two equivalents of either 3-methylsalicylic acid (MesaliH2) or 3,5-di-isopropylsalicylic acid (di-i-PrsaliH2). Performing the reaction in refluxing toluene afforded the two analogous ditungsten complexes 1, [{WO(Mesali)(MesaliH)}2(mu-O)], and 2, [{WO(di-i-Prsali)(di-i-PrsaliH)}2(mu-O)], however in refluxing hexane the mononuclear tungsten complex , [WO(di-i-Prsali)(di-i-PrsaliH)Cl], was isolated. The single crystal X-ray study of revealed a pseudo-octahedral geometry around the tungsten centres. Aerosol assisted chemical vapour deposition of or afforded brown tungsten trioxide thin films. These films were converted to yellow fully oxidised WO3 on annealing in air at 550 degrees C for 30 minutes. The yellow WO3 films demonstrate preferred orientation on the substrate and show interesting functional properties-photo induced hydrophilicity and photocatalytic activity.     

Lanthanide chloride complexes of amine-bis(phenolate) ligands and their reactivity in the ring-opening polymerization of epsilon-caprolactone

Reaction of two equivalents of n-BuLi with sterically demanding amine-bis(phenol) compounds, H(2)O(2)NN'(R) (Me(2)NCH(2)CH(2)N{CH(2)-3,5-R(2)-C(6)H(2)OH}(2); R = t-Bu or t-Pe (tert-pentyl)) yields isolable lithium complexes, Li(2)(O(2)NN'(R)), in good yields. Upon reaction with one equivalent of LnCl(3)(THF)(x), the lithium salts afford rare earth amine-phenolate chloride complexes in good yields, Ln(O(2)NN'(R))Cl(THF); Ln = Y, Yb, Ho, Gd, Sm, Pr. Crystals of Y(O(2)NN'(t-Bu))Cl(THF), 1, and Sm(O(2)NN'(t-Bu))Cl(DME), 2, suitable for single crystal X-ray crystallographic analysis were obtained. In contrast to previously reported [{Gd(O(2)NN'(t-Pe))(THF)(micro-Cl)}(2)] and related La and Sm complexes, these species are monomeric. 1 contains Y in a distorted octahedral environment bonded to two amine, two phenolate, one THF and one chloride donor. 2 contains Sm in a distorted capped trigonal prismatic environment bonded to two amine, two phenolate, two DME oxygens and one chloride donor. The Ln(O(2)NN'(t-Pe))Cl(THF) complexes were active initators for the controlled ring-opening polymerization of epsilon-caprolactone with a tendency to form low molecular weight cyclic polyesters (M(n) 3000-5000). The conversion rates, although slower than related amido and alkyl species, were different for monomeric and dimeric initiators. The size of the metal centre also affected the conversions and the molecular weights achieved.     

Five-coordinate nickel(II) complexes with carboxylate anions and derivatives of 1,5,9-triazacyclododec-1-ene: structural and 1H NMR spectroscopic studies

The hydroxo complexes [Ni2(mcN3)2(mu-OH)2]2(PF6)2[mcN3 = 2,4,4-trimethyl-1,5,9-triazacyclododec-1-ene (Me3-mcN3) or 2,4,4,9-tetramethyl-1,5,9-triazacyclododec-1-ene (Me4-mcN3)] react with the corresponding carboxylic acid [HA = benzoic (Hbz), salicylic (Hsal) or acetylsalicylic (Hacsal) acid] to give five-coordinate nickel(II) complexes of the type [Ni(mcN3)(A)](PF6). The complexes have been studied by spectroscopic methods (IR, UV-Vis and 1H NMR). In acetone solution they exhibit isotropically shifted 1H NMR resonances. The full assignment of these resonances has been made using one- and two-dimensional 1H NMR techniques. The single-crystal structures of [Ni(Me4-mcN3)(bz)](PF6), [Ni(Me4-mcN3)(sal)](PF6) and[Ni(Me4-mcN3)(acsal)](PF6) have been established by X-ray diffraction.     

铕(Ⅲ)水杨酸邻菲咯啉三元配合物性质研究

合成了Eu3+的水杨酸和邻菲咯啉三元配合物,其组成为Eu(Hsal)3phen,用IR,UV,XPS研究配合物的性质和成键特征.结果表明,Hsal-的羧基、phen的两个氮原子均与Eu3+离子呈双齿配位,形成配合物后芳香环上的共轭性减小.用循环伏安法研究了配合物在玻碳电极上的电化学行为,发现配合物的电化学可逆性比游离Eu3+离子差,不同底液对配合物的电化学行为有影响.     

Preparation and characterization of diarylphosphazene and diarylphosphinohydrazide complexes of titanium, tungsten and ruthenium and phosphorylketimido complexes of rhenium

Reaction of the proligand Ph2PN(SiMe3)2 (L1) with WCl6 gives the oligomeric phosphazene complex [WCl4(NPPh2)]n, 1 and subsequent reaction with PMe2Ph or NBu4Cl gives [WCl4(NPPh2)(PMe2Ph)] (2) or [WCl5(NPPh2)][NBu4] (3), respectively. DF calculations on [WCl5(NPPh2)][NBu4] show a W=N double bond (1.756 A) and a P-N bond distance of 1.701 A, which combined with the geometry about the P atom suggests, there is no P-N multiple bonding. Reaction of L1 with [ReOX3(PPh3)2] in MeCN (X = Cl or Br) gives [ReX2(NC(CH3)P(O)Ph2)(MeCN)(PPh3)](X = Cl, 4, X = Br, 5) which contains the new phosphorylketimido ligand. It is bound to the rhenium centre with a virtually linear Re-N-C arrangement (Re-N-C angle = 176.6 degrees, when X = Cl) and there is multiple bonding between Re and N (Re-N = 1.809(7) A when X = Cl). The proligand Ph2PNHNMe2(L2H) reacts with [(C5H5)TiCl3] to give [(C5H5)TiCl2(Me2NNPPh2)] (6). An X-ray crystal structure of the complex shows the ligand (L2) is bound by both nitrogen atoms. Reaction of the proligands Ph2PNHNR2[R2 = Me2 (L2H), -(CH2CH2)2NCH3 (L3H), (CH2CH2)2CH2 (L4H)] with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave [RuCl2(eta6-p-MeC6H4iPr)L] {L = L2H (7), L3H (8), L4H (9)}. The X-ray crystal structures of 7-9 confirmed that the phosphinohydrazine ligand is neutral and bound via the phosphorus only. Reaction of complexes 7-9 with AgBF4 resulted in chloride ion abstraction and the formation of the cationic species [RuCl(6-p-MeC6H4iPr)(L)]+ BF4- {(L = L2H (10), L3H (11), L4H (12)}. Finally, reaction of complex 6 with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave the binuclear species [(eta6-p-MeC6H4iPr)Cl2Ru(mu2,eta3-Ph2PNNMe2)TiCl2(C5H5)], 13.     

Exchange of an imido ligand in bis(imido) complexes of uranium

Addition of B(C6H5)3.H2O to U(NtBu)2I2(THF)2 provides U(NtBu)(O)I2(THF)2, a complex with a trans arrangement of the oxo and imido ligands. A DFT study on the Ph3PO adduct, U(NtBu)(O)I2(Ph3PO)2, reveals that there are six bonding orbitals in the O=U=N interaction, much like the bis(imido) N=U=N interaction. However, the calculations suggest that the multiple bonding in the oxo imido complexes is less covalent than that in the bis(imido) analogues.     

Faster oxygen atom transfer catalysis with a tungsten dioxo complex than with its molybdenum analog

The synthesis and characterization of a series of molybdenum ([MoO(2)Cl(L(n))]; L(1) (1), L(2) (3)) and tungsten ([WO(2)Cl(L(n))]; L(1) (2), L(2) (4)) dioxo complexes (L(1) = 1-methyl-4-(2-hydroxybenzyl)-1,4-diazepane and L(2) = 1-methyl-4-(2-hydroxy-3,5-di-tert-butylbenzyl)-1,4-diazepane) of tridentate aminomonophenolate ligands HL(1) and HL(2) are reported. The ligands were obtained by reductive amination of 1-methyl-1,4-diazepane with the corresponding aldehyde. Complexes 3 and 4 were obtained by the reaction of [MO(2)Cl(2)(dme)(n)] (M = Mo, n = 0; W, n = 1) with the corresponding ligand in presence of a base, whereas for the preparation of 1 and 2 the ligands were deprotonated by KH prior to the addition to the metal. They were characterized by NMR and IR spectroscopy, by cyclic voltammetry, mass spectrometry, elemental analysis and by single-crystal X-ray diffraction analysis. Solid-state structures of the molybdenum and tungsten cis-dioxo complexes reveal hexa-coordinate metal centers surrounded by two oxo groups, a chloride ligand and by the tridentate monophenolate ligand which coordinates meridionally through its [ONN] donor set. In the series of compounds 1-4, complexes 3 and 4 have been used as catalysts for the oxygen atom transfer reaction between dimethyl sulfoxide (DMSO) and trimethyl phosphine (PMe(3)). Surprisingly, faster oxygen atom transfer (OAT) reactivity has been observed for the tungsten complex [WO(2)Cl(L(2))] (4) in comparison to its molybdenum analog [MoO(2)Cl(L(2))] (3) at room temperature. The kinetic results are discussed and compared in terms of their reactivity.     

Synthesis of ((t)Bu3SiNH)2ClW triple bond WCl(NHSi(t)Bu3)2 and its degradation via NH bond activation.

Treatment of NaW2Cl7(THF)5 with 4 equiv of (t)Bu3SiNHLi afforded the C2 W(III) dimer [((t)Bu3SiNH)2WCl]2 (1, d(W triple bond W) = 2.337(2) A), which is a rare, primary amide M2X4Y2 species. Its degradation provided evidence of NH bond activation by the ditungsten bond. Addition of 2 equiv of (t)Bu3SiNHLi or TlOSi(t)Bu3 to 1 yielded H2 and hydride ((t)Bu3SiN)2((t)Bu3SiNH)WH (2, d(WH) = 1.67(3) A) or ((t)Bu3SiN)2((t)Bu3SiO)WH (3). Thermolysis (60 degrees C, 16 h) of 1 in py gave ((t)Bu3SiN)2WHCl(py) (4-py, 40-50%), ((t)Bu3SiN)2WCl2(py) (6-py, 10%), and ((t)Bu3SiN)2HW(mu-Cl)(mu-H)2W(NSi(t)Bu3)py2 (5-py2, 5%), whereas thermolysis in DME produced ((t)Bu3SiN)2WCl(OMe) (7, 30%), ((t)Bu3SiN)2WCl2 (6, 20%), and ((t)Bu3SiN)2HW(mu-Cl)(mu-H)2W(NSi(t)Bu3)DME (5-DME, 3%). Compound 7 was independently produced via thermolysis of 4-py and DME (-MeOEt, -py), and THF and ethylene oxide addition to hydride 2 gave ((t)Bu3SiN)2((t)Bu3SiNH)WO(n)Bu (8) and ((t)Bu3SiN)2((t)Bu3SiNH)WOEt (9), respectively. Dichloride 6 was isolated from SnCl4 treatment of 1 with the loss of H2. Sequential NH bond activations by the W2 core lead to "((t)Bu3SiN)2WHCl" (4) and subsequent thermal degradation products. Thermolysis of 1 in the presence of H2C=CH(t)Bu and PhC triple bond CPh trapped 4 and generated ((t)Bu3SiN)2W((neo)Hex)Cl (10) and a approximately 6:1 mixture of ((t)Bu3SiN)2WCl(cis-CPh=CPhH) (11-cis) and ((t)Bu(3)SiN)2WCl(trans-CPh=CPhH) (11-trans), respectively. Thermolysis of the latter mixture afforded ((t)Bu3SiNH)((t)Bu3SiN)WCl(eta2-PhCCPh) (12) as the major constituent. Alkylation of 1 with MeMgBr produced ((t)Bu3SiN)2W(CH3)2 (13), as did addition of 2 equiv of MeMgBr to 6. X-ray crystal structure determinations of 1, 2, 5-py2, 6-py, 11-trans, and 12 confirmed spectroscopic identifications. A general mechanism that features a sequence of NH activations to generate 4, followed by chloride metathesis, olefin insertion, etc., explains the formation of all products.     

Solid-state synthesis of molybdenum and tungsten porphyrins and aerial oxidation of coordinated benzenethiolate to benzenesulfonate

A new route is developed for the synthesis of molybdenum and tungsten porphyrins using [M(NO)(2)py(2)Cl(2)] (M = Mo, W) as the metal source and TPP (dianion of 5,10,15,20-meso-tetraphenylporphyrin) in the benzoic acid melt. Complexes [Mo(V)O(TPP)(OOCPh)] (1) and [W(V)O(TPP)(OOCPh)] (2) are isolated in almost quantitative yield. These are characterized by single-crystal X-ray structure analysis, electron paramagnetic resonance, electronic and IR spectroscopy, and magnetic moment measurements. Benzenethiol substitutes for PhCOO(-) in 1, forming an intermediate thiolato complex that responds to the intramolecular redox reaction across the Mo(V)-SPh bond to yield [Mo(IV)O(TPP)] (3). Under an excess of benzenethiol, PhS(-) is coordinated to the vacant site in 3, which under aerial oxidation is oxidized to benzenesulfonate to form [Mo(V)O(TPP)(O(3)SPh)] (4). 2 undergoes similar aerial oxidation chemistry albeit slowly.