Near-edge X-ray absorption fine structure investigations of order in carbon nanotube-based systems

Probing order in nanotube systems is of fundamental importance in devising applications of these tubes in field emission applications as well as for components of composite materials. We use near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to qualitatively and quantitatively study the degree of order and alignment in a wide range of carbon nanotube-based systems, including single-walled carbon nanotube (SWNT) powder, SWNT films, and aligned multiwalled carbon nanotubes. The results are compared to analogous data obtained from a highly ordered pyrolytic graphite (HOPG) sample.     

Self-assembled carbon nanotubes on gold: polarization-modulated infrared reflection-absorption spectroscopy, high-resolution X-ray photoemission spectroscopy, and near-edge X-ray absorption fine structure spectroscopy study

Recently we reported noncovalent functionalization of nanotubes in an aqueous medium with ionic liquid-based surfactants, 1-dodecyl-3-methylimidazolium bromide (1) and 1-(12-mercaptododecyl)-3-methylimidazolium bromide (2), resulting in positively charged single-wall carbon nanotube (SWNT)-1,2 composites. Thiolation of SWNTs with 2 provides their self-assembly on gold as well as templating gold nanoparticles on SWNT sidewalls via a covalent -S-Au bond. In this investigation, we studied the electronic structure, intermolecular interactions, and packing within noncovalently thiolated SWNTs and also nanotube alignment in the bulk of SWNT-2 dried droplets and self-assembled submonolayers (SAMs) on gold by high-resolution X-ray photoemission spectroscopy (HRXPS), C K-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS). HRXPS data confirmed the noncovalent nature of interactions within the nanocomposite of thiolated nanotubes. In PM-IRRAS spectra of SWNT SAMs on gold, the IR-active vibrational SWNT modes have been observed and identified. According to PM-IRRAS data, the hydrocarbon chains of 2 are oriented with less tilt angle to the bare gold normal in a SAM deposited from an SWNT-2 dispersion than those of 1 deposited from an SWNT-1 dispersion on the mercaptoethanesulfonic acid-primed gold. For both the dried SWNT-2 bulk and the SWNT-2 SAM on gold, the C K-edge NEXAFS spectra revealed the presence of CH-pi interactions between hydrocarbon chains of 2 and the pi electronic nanotube structure due to the highly resolved vibronic fine structure of carbon 1s --> R*/sigma*C-H series of states in the alkyl chain of 2. For the SWNT-2 bulk, the observed splitting and upshift of the SWNT pi* orbitals in the NEXAFS spectrum indicated the presence of pi-pi interactions. In the NEXAFS spectrum of the SWNT-2 SAM on gold, the upshifted values of the photon energy for R*/sigma*C-H transitions indicated close contact of 2 with nanotubes and with a gold surface. The angle-dependent NEXAFS for the SWNT-2 bulk showed that most of the molecules of 2 are aligned along the nanotubes, which are self-organized with orientation parallel to the substrate plane, whereas the NEXAFS for the SWNT-2 SAM revealed a more normal orientation of functionality 2 on gold compared with that in the SWNT-2 bulk.     

Growth Mechanism of Vertically Aligned Carbon Nanotube Arrays

Vertically aligned multi-walled carbon nanotube arrays grown on quartz substrate are obtained by co-pyrolysis of xylene and ferrocene at 850 oC in a tube furnace. Raman spectroscopy and high resolution transmission electron microscopy measurements show that the single-walled carbon nanotubes are only present on top of vertically aligned multi-walled carbon nanotube arrays. It has been revealed that isolated single-walled carbon nanotubes are only present in those floating catalyst generated materials. It thus suggests that the single-walled carbon nanotubes here are also generated by floating catalyst. Vertically alignedcarbon nanotube arrays on the quartz substrate have shown good orientation and good graphitization. Meanwhile, to investigate the growth mechanism, two bi-layers carbon nan-otube films with di erent thickness have been synthesized and analyzed by Raman spectroscopy. The results show that the two-layer vertically aligned carbon nanotube films grow “bottom-up”. There are distinguished Raman scattering signals for the second layer itself, surface of the first layer, interface between the first and second layer, side wall and bottom surface. It indicates that the obtained carbon nanotubes follow the base-growth mechanism, and the single-walled carbon nanotubes grow from their base at the growth beginning when iron catalyst particles have small size. Those carbon nanotubes with few walls (typically <5 walls) have similar properties, which also agree with the base-growth mechanism.     

CVD growth of N-doped carbon nanotubes on silicon substrates and its mechanism

In the present study, we report the chemical vapor deposition (CVD) of nitrogen-doped (N-doped) aligned carbon nanotubes on a silicon (Si) substrate using ferrocene (Fe(C5H5)2) as catalyst and acetonitrile (CH3CN) as the carbon source. The effect of experimental conditions such as temperature, gaseous environment, and substrates on the structure and morphology of N-doped carbon nanotubes arrays is reported. From XPS and EELS data, it was found that the nitrogen content of the nanotubes could be determined over a wide range, from 1.9% to 12%, by adding the addition of hydrogen (H2) to the reaction system. It was also shown by SEM that N-doped carbon nanotube arrays could be produced on Si and SiO2 substrates at suitable temperatures, although at different growth rates. Using these concentrations, it was possible to produce three-dimensional (3D) carbon nanotubes architectures on predetermined Si/SiO2 patterns. The mechanism underlying the effect of nitrogen containing carbon sources on nanotube formation was explored using X-ray photoelectron spectroscopy (XPS).     

Reversible tuning of the wettability of carbon nanotube arrays: the effect of ultraviolet/ozone and vacuum pyrolysis treatments

Among diverse types of synthetic materials, arrays of vertically aligned carbon nanotubes have attracted the most attention, mainly because of their exceptional mechanical, electrical, optical, and thermal properties. However, their wetting properties are yet to be understood. In this present study, oxygenated surface functional groups have been identified as a vital factor in controlling the wetting properties of carbon nanotube arrays. The results presented herein indeed show that a combination of ultraviolet/ozone and vacuum pyrolysis treatments can be used to vary the surface concentration of these functional groups such that the carbon nanotube array can be repeatedly switched between hydrophilic and hydrophobic.     

Surface chemistry and structure of purified, ozonized, multiwalled carbon nanotubes probed by NEXAFS and vibrational spectroscopies.

Understanding of oxidative processes such as solution-phase ozonolysis in multiwalled carbon nanotubes (MWNTs) is of fundamental importance in devising applications of these tubes as components in composite materials, as well as for development of cutting and filling protocols. We present here an evaluation of various spectroscopic tools to study the structure and composition of functionalized nanotubes. We demonstrate near-edge X-ray absorption fine structure (NEXAFS) spectroscopy as a particularly useful and effective technique for studying the surface chemistry of carbon nanotubes.     

NEXAFS光谱分析聚合物修饰的单壁碳纳米管

利用C1s、O1s、N1s近边X射线吸收精细结构(Near Edge X-Ray Absorption Fine Structure,NEXAFS)光谱对聚合物修饰的碳纳米管进行了分析,研究了氧化及偶联聚合物对碳纳米管结构的影响。氧化碳纳米管及十八胺修饰的、聚合物/十八胺双修饰的碳纳米管的NEXAFS光谱均出现了碳/氧K边π*(C=O)和σ*(C-O)共振峰;而十八胺修饰的、聚合物/十八胺双修饰的碳纳米管则出现了氮K边π*(N-C=O)和σ*(N1s)共振峰。分析表明,NEXAFS光谱可有效表征聚合物修饰的碳纳米管。     

Charge transfer from metallic single-walled carbon nanotube sensor arrays

This paper explores the possibility of using arrays of metallic carbon nanotubes as sensors. Unlike their semiconducting counterparts, single-walled carbon nanotube arrays or networks that are dominated by metallic conduction pathways have not been investigated for their environmental sensitivity. In this work, we demonstrate transduction of molecular adsorption via charge transfer through predominantly metallic single-walled carbon nanotubes. Raman spectroscopy and electric field dependent transport confirm that signal transduction takes place through primarily large diameter metallic nanotubes. This unique signal transduction mechanism might have implications for novel sensors. The scaling of the signal with array impedance is well described using an irreversible binding model developed previously. The arrays have several advantages including a simple, two-electrode fabrication, rapid regeneration, and a responsivity that scales predictably and linearly with the number of adsorption sites. An array-assisted hydrolysis of reactive analytes is found to regenerate the nanotube surface from hydrolyzable species which include important organophosphate nerve agents.     

Human fibrinogen adsorption onto single-walled carbon nanotube films

The adsorption behavior of human fibrinogen (Hfg) on single-walled carbon nanotube (SWNT) films was investigated using scanning electron microscopy (SEM) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was shown in the SEM images that fibrinogen was adsorbed strongly on the surface of SWNT when the samples were incubated in the Hfg solutions for 10 min. The dependence of adsorption on the concentration of fibrinogen was also investigated and it was found that adsorption increased with increasing concentration. In order to further explore the adsorption of fibrinogen on SWNT surface, NEXAFS spectra were obtained at the N K-edge and the C K-edge. The results confirmed the conclusion regarding the dependence of adsorption on fibrinogen concentration. It is demonstrated that, due to its high sensitivity to the surface elements, NEXAFS spectroscopy is a powerful tool to investigate the adsorption of fibrinogen on SWNT films.     

Mechanism of carbon nanotube dispersion and precipitation during treatment with poly(acrylic acid)

Carbon nanotubes have been shown to be easily dispersed within an acidic aqueous solution of poly(acrylic acid) but precipitate when the pH is increased. Transmission electron microscopy showed that the nanotubes were more exfoliated under the acidic condition but highly aggregated under the basic condition. Carbon K‐edge NEXAFS spectroscopy showed that the carbon nanotubes did not chemically react with poly(acrylic acid) during the dispersion or precipitation and that the dispersion mainly involved physical adsorption of poly(acrylic acid) onto the nanotubes. Together with the carbon K‐edge NEXAFS spectra, the cobalt L_{3, 2}‐edge NEXAFS spectra suggested that under the basic condition, the cobalt impurity within the nanotubes strongly reacted with poly(acrylic acid) resulting in complex formation. Cobalt reduces the adsorption of poly(acrylic acid) onto the nanotubes, which then reduced the nanotube dispersion and resulted in the precipitation. Copyright © 2008 John Wiley & Sons, Ltd.     

An X-ray spectroscopy study of CdS nanoparticles formed by the Langmuir–Blodgett technique on the surface of carbon nanotube arrays

The composition and electronic structure of cadmium sulfide (CdS) nanoparticles formed by the Langmuir–Blodgett (LB) technique on clean silicon wafers and the surface of vertically aligned carbon nanotube (CNT) arrays are studied by X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The samples were annealed in a vacuum at 175 °C and 225 °C to remove the organic matrix of the LB film. From the analysis of the XPS data the increased concentration of sulfate groups on the surface of CdS nanoparticles formed on CNTs and the electron density transfer from CdS to CNTs are determined. An increase in the LB film annealing temperature causes an increase in the degree of crystallinity and the CdS crystallite size and a decrease in the photoluminescence intensity of a CdS–CNT hybrid.     

TiO2纳米管阳极氧化制备机理及热处理对其影响

采用阳极氧化方法,在NH4F+H2O的乙二醇溶液体系下制备了TiO2纳米管列阵薄膜,建立了TiO2纳米管列阵薄膜的"电场诱导"生长模型。TiO2纳米管的管形结构形成与TiO2的半导体性质相关。纳米管表面吸附的纳米粒子与管壁间空间有关系。经过退火处理的纳米管管口由12~14个直径为25~35 nm的纳米颗粒团聚体组成,600℃时,纳米管结构已被破坏。经过300~600℃之间不同温度处理后的TiO2纳米管呈现锐钛矿晶态,比表面积随温度升高呈下降趋势。     

Free-standing arrays of isolated TiO2 nanotubes through supercritical fluid drying

A common complication in fabricating arrays of TiO(2) nanotubes is that they agglomerate into tightly packed bundles during the inevitable solvent evaporation step. This problem is particularly acute for template-fabricated TiO(2) nanotubes, as the geometric tunability of this technique enables relatively large inter-pore spacings or, from another perspective, more space for lateral displacement. Our work showed that agglomeration results from the surface tension forces that are present as the ambient solvent is evaporated from the nanotube film. Herein, we report a processing and fabrication approach that utilizes supercritical fluid drying (CO(2)) to prepare arrays of template-fabricated TiO(2) nanotubes that are free-standing and spatially isolated. This approach could be beneficial to many emerging technologies, such as solid-state dye-sensitized solar cells and vertically-oriented carbon nanotube electrodes.     

湿法纯化碳纳米管阵列及其对碳纳米管阵列形貌的影响

采用酸溶液处理方法对垂直于衬底生长的碳纳米管阵列的纯化进行了研究. 利用扫描电子显微镜、X射线光电子能谱等手段对纯化前后的碳纳米管阵列的结构、形貌及化学组成进行表征. 实验结果表明, 通过控制条件, 酸溶液处理方法能够在有效地去除催化剂粒子等杂质的同时又保持阵列的相对完整性. 纯化后的碳纳米管阵列会促进其在电子学领域的进一步应用.     

Analysis of stability of nanotube dispersions using surface tension isotherms

In this paper, we present the analyses of surface tension of surfactant-stabilized dispersions of carbon nanotubes. This method allows one to study interactions of carbon nanotubes with surfactants at different levels of nanotube loading when optical methods fall short in quantifying the level of nanotube separation. Sodium dodecyl sulfate was used as a stabilizing agent to uniformly disperse single-walled carbon nanotubes in an aqueous media. We show that surface tension is very sensitive to small changes of nanotube and surfactant concentrations. The experimental data suggest that, at moderate concentrations, surfactant displaces carbon nanotubes from the air-water interface and the nanotubes are mostly moved into the bulk of the liquid. By analyzing the surface tension as a function of surfactant concentration, we obtained the dependence of critical micelle concentration on nanotube loading. We then constructed the adsorption isotherm for dodecyl sulfate on carbon nanotubes and bundles of carbon nanotubes. The results of these experiments enabled us to extend the phase diagram of the produced dispersions to a broader range of surfactant and nanotube concentrations.     

Wet Purification of Aligned Carbon Nanotube Arrays and Its Impact on the Morphology of the Carbon Nanotube Arrays

A simple acid treatment method was applied to remove the catalyst impurities and other residues contaminated in the vertically aligned carbon nanotube arrays. We demonstrated that acid treatment was an efficient approach for aligned carbon nanotube purification. Scanning electron microscopy and X-ray photoelectron spectroscopy were used to characterize the morphology of the aligned carbon nanotube arrays and to determine the efficiency of the purification. Using hydrochloric acid could efficiently eliminate catalyst impurities and retain the original structures of the aligned carbon nanotube arrays. The method provided a simple, economical, and effective way to purify the aligned carbon nanotubes, and it would promote the applications of vertically aligned carbon nanotube arrays in electronic field.     

Ruthenium porphyrin functionalized single-walled carbon nanotube arrays--a step toward light harvesting antenna and multibit information storage

Ruthenium porphyrin functionalized single-walled carbon nanotube arrays have been prepared using coordination of the axial position of the metal ion onto 4-aminopyridine preassembled single-walled carbon nanotubes directly anchored to a silicon(100) surface (SWCNTs-Si). The formation of these ruthenium porphyrin functionalized single-walled carbon nanotube array electrodes (RuTPP-SWCNTs-Si) has been monitored using infrared spectroscopy (IR), differential pulse voltammetry (DPV), atomic force microscopy (AFM), laser desorption time-of-flight mass spectroscopy (LDI-TOF-MS), UV-vis spectroscopy, fluorescence spectroscopy, and cyclic voltammetry. Electrochemical results show two successive one-electron reversible redox waves. The surface concentration of the ruthenium porphyrin molecules is 3.44 x 10 (-8) mol cm (-2). Optical results indicate that the immobilization of ruthenium porphyrin enhances the light absorption of SWCNTs-Si surfaces in the visible light region. Moreover mixed assembly of ferrocene/porphyrin onto carbon nanotube arrays has been achieved by altering the ratio of two redox-active species in the deposition solution. These results suggest the ruthenium porphyrin modified electrodes are excellent candidates for molecular memory devices and light harvesting antennae.     

Conformation analysis of nucleic acids and proteins adsorbed on single-shell carbon nanotubes

This paper presents a concise review of the experimental and calculated data reported in the literature on the noncovalent interactions of DNA and proteins with the nonfunctionalized carbon nanotubes. Our Raman scattering and electron microscopy data on carbon nanotubes and SEIRA spectral data on changes in the conformational state of the main biological polymers (DNA, Poly, BSA, and RNase) in reactions with single-shell carbon nanotubes allowed us to define the character of noncovalent interactions in the tube biomolecule system. An analysis of the data showed that reactions of DNA with nanotubes lead to the binding on the surface of the nanotube and form stable complexes with van der Waals interactions, in which stacking plays the major role and which changes the hydrogen bonds in the biological molecule with structure rearrangements. Albumin and RNase are presumably adsorbed at the conventional binding sites of these proteins on the nanotube with participation of hydrophobic interaction and π stacking, as indicated by structure rearrangements in proteins.     

脉冲激光溅射下固液界面生长的碳纳米管及其机理初探

以脉冲激光束直接溅射浸在水中的单质碳样品，发现在固液界面也能产生的碳纳米管，实验还发现碳纳米管的形成与样品的结构有密切的关联：石墨的层状结构越完整，碳纳米管的形成越容易，而且石墨层面相对于激光束的取向也会显著地影响碳的生成。     

Self-assembly of linear arrays of semiconductor nanoparticles on carbon single-walled nanotubes

Ligand-stabilized nanocrystals (NCs) were strongly bound to the nanotube surfaces by simple van der Waals forces. Linear arrays of CdSe and InP quantum dots were formed by self-assembly using the grooves in bundles of carbon single-walled nanotubes (SWNTs) as a one-dimensional template. A simple geometrical model explains the ordering in terms of the anisotropic properties of the nanotube surface. CdSe quantum rods were also observed to self-organize onto SWNTs with their long axis parallel to the nanotube axis. This approach offers a route to the formation of ordered NC/SWNT architectures that avoids problems associated with surface derivatization.