The application of normal phase liquid chromatography/mass spectrometry by using coaxial continuous flow fast atom bombardment

This article describes the interfacing of a normal phase fused silica capillary high performance liquid chromatography system to a magnetic sector mass spectrometer by using continuous flow fast atom bombardment (CFFAB). While the performance of CFFAB using reversed phase techniques is well understood, there is very little if any documentation on interfacing nonaqueous normal phase systems with CFFAB. This article describes the use of packed fused silica capillary liquid chromatography columns and the corresponding normal phase solvent systems. The experimental parameters required with nonaqueous solvent systems differ significantly from those of aqueous solvent systems. Ditallowdimethylammonium chloride (DTDMAC), a cationic surfactant commonly used as the active ingredient in fabric softener products, was chosen as a model compound to demonstrate the technique. DTDMAC was identified in a commercially available fabric softener product by using on-line normal phase liquid chromatography/mass spectrometry with accurate mass and tandem mass spectrometry.     

X射线衍射法测定滑石粉中石棉成分

使用X射线衍射法,通过石棉的2θ特征峰进行判断,分析滑石粉中可能存在的石棉成分。结果表明,样品中不含温石棉、铁石棉和青石棉,并对温石棉和绿泥石进行了有效区分。方法快速,灵敏,可有效用于滑石粉中石棉的测定。     

New method for the preparation of small diameter columns with polymeric stationary phases for open tubular liquid chromatography

The purpose of this report is to introduce a new method for use in coating polymeric stationary phase films on the inside wall of small bore diameter fused silica capillary tubing. This technique is being developed for use in fabricating capillary columns for open tubular liquid chromatography.     

Liquid exclusion-adsorption chromatography: a new technique for isocratic separation of non-ionic surfactants. V. Two-dimensional separation of fatty acid polyglycol ethers

Fatty acid polyglycol esters can be fully characterized using two-dimensional liquid chromatography with liquid chromatography under critical conditions (LCCC) as the first and liquid exclusion-adsorption chromatography (LEAC) as the second dimension. LEAC is run under isocratic conditions, which allows the use of the refractive index detector, and thus accurate quantitation. Fractions from LCCC are transferred to LEAC using the full adsorption-desorption technique, by which they are focussed and reconcentrated before injection into the second dimension. This is achieved by increasing the water content of the mobile phase behind the LCCC column. Monoester oligomers of up to 20 oxyethylene units can be resolved to the baseline. Diester oligomers are partially separated in the first dimension (LCCC).     

Preparative Monolithic Silica Sorbents (PrepRODs™) and Their Use in Preparative Liquid Chromatography

The use of monolithic silica sorbents for the isolation of substances by preparative liquid chromatography is demonstrated. Preparative liquid chromatography is recognized as a valuable technique for the isolation and purification of substances in the pharmaceutical and fine chemicals industry. The system technology has meanwhile reached a high standard, and the greatest future improvements are expected to arise from new and improved adsorbents. Monolithic silica sorbents offer some unique features for preparative liquid chromatography. They exhibit high efficiencies even at high flow rates due to their fast convective mass transfer and can therefore be used at very high mobile phase velocities, leading to high productivity and hence to maximum process economy. The benefits of this new type of adsorbent are illustrated for an example in batch‐chromatographic mode and an example using the continuous simulated moving bed (SMB) technology.     

The recent developments in dispersive liquid–liquid microextraction for preconcentration and determination of inorganic analytes

Recently, increasing interest on the use of dispersive liquid–liquid microextraction (DLLME) developed in 2006 by Rezaee has been found in the field of separation science. DLLME is miniaturized format of liquid–liquid extraction in which acceptor-to-donor phase ratio is greatly reduced compared with other methods. In the present review, the combination of DLLME with different analytical techniques such as atomic absorption spectrometry (AAS), inductively coupled plasma-optical emission spectrometry (ICP-OES), gas chromatography (GC), and high-performance liquid chromatography (HPLC) for preconcentration and determination of inorganic analytes in different types of samples will be discussed. Recent developments in DLLME, e.g., displacement-DLLME, the use of an auxiliary solvent for adjustment of density of extraction mixture, and the application of ionic liquid-based DLLME in determination of inorganic species even in the presence of high content of salts are presented in the present review. Finally, comparison of DLLME with the other liquid-phase microextraction approaches and limitations of this technique are provided.     

Solid phase microextraction as a tool for trace element speciation

Applications of solid phase microextraction (SPME) for trace element speciation are reviewed. Because of the relative novelty of the technique in the inorganic analytical field, the first part of this review provides a short overview of the principles of SPME operation; the second part describes typical SPME applications to elemental speciation. Volatile organometallic compounds can be collected by SPME from the sample headspace or liquid phase, directly or after derivatization. The usual separation method for the collected volatile species is gas chromatography. Non-volatile analyte species can be collected from the sample liquid phase and separated by liquid chromatography or capillary electrophoresis. Currently, most SPME applications in the inorganic field comprise analyte ethylation and headspace extraction followed by gas chromatographic separation of tin, lead and mercury species. The use of SPME for the study of equilibria in complex systems is also discussed and future roles of solid phase microextraction in the inorganic analytical field are raised.     

Centrifugal partition chromatography – A review of recent applications and some classic references

Countercurrent chromatography, based on liquid–liquid partitioning, has many technological variants. One of them is centrifugal partition chromatography, introduced by Wataru Murayama and Kanichi Nunogaki in 1982. This technique, like other countercurrent chromatography techniques, is based on the phenomenon of liquid–liquid partitioning between two immiscible liquid phases that stay at equilibrium. But the significant difference between this technique and others is the retention mechanism of stationary phase. In the case of centrifugal partition chromatography, this mechanism is based on hydrostatic force, formed by the centrifugal field in the rotor in one‐axis centrifuge. Sometimes that allows more control of stationary phase, for example, when aqueous two‐phase and other difficult solvent systems are used. However, the efficiency of the separation in centrifugal partition chromatography is also affected by a variety of parameters dependent on the sample properties in the solvent system, physical properties of the solvent system, parameters of the instrument, and the method. This article includes also recent ideas for improvements to the technique and broadening its application (e.g., (multiple) dual‐mode or elution–extrusion procedure, pH‐zone‐refining centrifugal partition chromatography, ion‐exchange centrifugal partition chromatography, online and offline coupling of centrifugal partition chromatography).     

Recent developments and applications of liquid phase microextraction in fruits and vegetables analysis

The sample preparation step has been identified as the bottleneck of analytical methodology in chemical analysis. Therefore, there is need for the development of cost‐effective, easy to operate, and environmentally friendly miniaturized sample preparation technique. The microextraction techniques combine extraction, isolation, concentration, and introduction of analytes into analytical instrument, to a single and uninterrupted step, and improve sample throughput. The use of liquid‐phase microextraction techniques for the analysis of pesticide residues in fruits and vegetables are discussed with the focus on the methodologies employed by different researchers and their analytical performances. Analytes are extracted using water‐immiscible solvents and are desorbed into gas chromatography, liquid chromatography, or capillary electrophoresis for identification and quantitation.     

固相微萃取与高效液相色谱联用技术的进展

 较全面地评述了固相微萃取与高效液相色谱联用技术的发展与应用 ,包括该技术的原理、接口装置、涂层材料等。     

Use of switchable hydrophilicity solvents for the homogeneous liquid–liquid microextraction of triazine herbicides from environmental water samples

A homogeneous liquid–liquid microextraction alternative, based on the use of switchable hydrophilicity solvents, is presented. The extraction technique makes use of 125 μL of a water‐immiscible solvent (N,N‐dimethylcyclohexylamine) that can be solubilized in the aqueous phase in 1:1 ratio using CO₂ as a reagent. After the extraction, phase separation is induced by the addition of sodium hydroxide that produces a change on the ionization state of the amine, and centrifugation was not necessary. The extraction technique has been optimized and characterized using the determination of triazine herbicides by gas chromatography with mass spectrometry in water samples. The presence of metallic ions in environmental waters as interferents is easily avoided by the addition of ethylenediaminetetraacetic acid before the microextraction procedure. The proposed method allows the determination of the target analytes at the low microgram per liter range with good precision (relative standard deviation lower than 12.5%).     

Nebulizing conditions of pneumatic electrospray ionization significantly influence electrolyte effects on compound measurement

Composition of mobile phase can greatly influence the success of electrospray ionization (ESI)‐interfaced liquid chromatography–mass spectrometry analysis. To investigate the relationship between formic‐acid‐based modification of mobile phase and ESI nebulizing conditions, an API 4000 ESI source and a TSQ Quantum one were compared under the same chromatographic conditions. Ginkgo terpene lactones and flavonols were measured in plasma, which involved using ascorbic acid to circumvent cross‐interference between the analytes. ESI responses to using formic acid included changes in signal intensity, matrix effect, and upper limit of quantification. Significant disparities in the responses were observed between the two ESI sources, suggesting that the use of electrolyte modifier in liquid chromatography mobile phase and the pneumatic nebulization for ESI should be properly balanced to accomplish optimal ESI‐based analysis. The distribution of unpaired ions toward the surface of the initial droplet was assumed to be an important step in the pneumatic ESI process. When using the electrolyte in mobile phase, a too fast droplet reduction by rapid‐heating‐assisted pneumatic nebulization could negatively decrease the time available for the unpaired ions to migrate from droplet interior to its surface. Ascorbic acid was identified as a major interfering substance for the bioanalytical assay; the interference mechanism might be associated with hindering the unpaired analyte ions from distributing toward the droplet surface rather than outcompeting the analyte ions for the limited excess charge on droplets surface. The current work extends the knowledge base of pneumatic ESI, which has implication for optimal use of the ESI‐interfaced liquid chromatography–mass spectrometry technique. Copyright © 2012 John Wiley & Sons, Ltd.     

多孔中空纤维液相微萃取技术的研究进展

基于多孔中空纤维的液相微萃取集采样、萃取和浓缩于一体,具有成本低,易与多种分析仪器联用等特点,该技术不仅可得到较高的富集倍数和回收率,而且具有突出的样品净化功能,有机溶剂用量非常少,是一种环境友好的样品前处理新技术,国内尚未广泛应用。本文综述了多孔中空纤维液相微萃取的主要装置、萃取模式、影响因素及其应用,引用文献54篇。     

Modeling of retention of adrenoreceptor agonists and antagonists on polar stationary phases in hydrophilic interaction chromatography: a review

Retention prediction models for reversed-phase liquid chromatography (RPLC) have been extensively studied owing to the fact that RPLC remains the most widely used chromatographic technique especially in the field of pharmaceutical and biomedical analyses. However, RPLC is not always the method of choice for the analysis of some compounds that have high polarity. Hydrophilic interaction chromatography (HILIC) has been gaining interest in the last few years as an alternative option to RPLC for the analysis of polar and hydrophilic analytes. HILIC is a variant of normal-phase liquid chromatography, but utilizes water in a water-miscible organic solvent as the eluent in conjunction with a hydrophilic stationary phase. The present review aims to summarize recent contributions on the development of retention prediction models for a group of basic analytes, namely, the adrenoreceptor agonists and antagonists, on different polar stationary phases. The use of multiple linear regression and artificial neural networks in model building is highlighted.     

A Quarter Century of Thin-Layer Chromatography—An Interim Report

Thin-layer chromatography (TLC) has been in general use since 1958. The prerequisites were the use of very small particle size material in the layers and the demonstration that not only lipophilic mixtures but also mixtures of cardiac glycosides, alkaloids, sugars, and amino acids could be separated quickly and simply on silica gel layers. The impressive separations obtained using the method later encouraged attempts to use adsorbants having such, narrow-range small particles in column chromatography. In order to achieve sufficient flow rates the use of high pressures was necessary. Thus, high pressure or high performance liquid chromatography (HPLC) was born, whose godfather, as far as instrumental development is concerned, was gas chromatography (GC). Today, chromatography is classified according to the nature of the transport phase: liquid, gas, or “electro” chromatography. Sample preparation often requires more time than the actual separation. rapid thermal separation and application techniques (TAS, TFG) have brought advantages to TLC. As before, the art of chromatography consists in choosing the appropriate mobile phase, stationary phase, and separation technique. Gradient TLC offers new possibilities; for example, gradient layers make it possible to obtain selective information on the individual components of a mixture and also allow significant focussing effects to be achieved. Sequential and centrifugal TLC have paved the way for further advances. The questions arise whether the standard conditions, formulated 25 years ago, are still applicable and how the variations which have been introduced should be judged. Group- and substance specific methods of detection are discussed in addition to universal methods. Quantitation is critically discussed and it is concluded that HPLC has the better chance in the furture. Combination and coupling techniques ease the positive identification of individual substances. Finally, it is discussed why TLC is the simplest, most versatile, most cost effective, and most widely used chromatographic method and reasons are proposed as to why it will remain so for the foreseeable future.     

Physicochemical properties of enhanced-fluidity liquid solvents

Enhanced fluidity (EF) liquid mixtures are advantageous as mobile phases for the separation of moderate to polar compounds in liquid chromatography (reversed-phase, normal, size exclusion, size exclusion, and chiral separations). The low viscosities and high diffusivities of EF mixtures allow highly efficient separations to be achieved in a small amount of time. The best use of enhanced-fluidity liquids is only possible when their physicochemical properties are known. Herein, the techniques used to measure the physicochemical properties (phase diagram, diffusivity, solvent strength and pH) of EF liquids are described. For each technique, the experiment design and the care necessary to insure the quality of the collected data are described. Finally, the impact of the measured physicochemical properties on the chromatography is also highlighted.     

Analysis of complex samples by solvating gas chromatography (supercritical fluid to gas transition)

The various forms of chromatography are primarily determined by differences in the physical state of the mobile phases. The main chromatographic categories include gas chromatography (GC), liquid chromatography, and supercritical fluid chromatography. Adjusting a temperature and pressure will change the mobile phase from liquid to supercritical fluid to gas, with concomitant changes in their physical properties. In this paper, the technique transition-phase chromatography (TPC) is described. In TPC, different mobile phase conditions exist inside the column. This phase transformation within the column results in huge differences in density, solvating power, viscosity, diffusivity, and, as a consequence, in the chromatographic properties of the mobile phase. TPC experiments using capillary columns packed in our laboratory have shown that when the mobile phase is transformed from supercritical fluid to gas, high column efficiencies can be achieved. The transition from supercritical fluid to gas (also called solvating GC), a particular case of the TPC, is evaluated for the separation of complex real samples (environmental, food, and fuels).     

Residue measurement of pendimethalin in tobacco by using heart‐cutting two dimensional liquid chromatography coupled with tandem mass spectrometry

A novel heart‐cutting two‐dimensional liquid chromatography coupled with tandem mass spectrometry method was developed for quantitative analysis of pendimethalin residue in tobacco. The strategy of reversed phase liquid chromatography coupled with another reversed‐phase liquid chromatography was employed for high column efficiency and excellent compatibility of mobile phase. In the first dimensional chromatography, a cyano column with methanol/water as the eluent was applied to separate pendimethalin from thousands of interference components in tobacco. By heart‐cutting technique, which effectively removed interference components, the target compound was cut to the second dimensional C18 column for further separation. The pendimethalin residue was finally determined by the tandem mass spectrometry under multiple reaction monitoring reversed‐phase liquid chromatography mode. Sample pretreatment of the new method was simplified, involving only extraction and filtration. Compared with traditional methodologies, the new method showed fairly high selectivity and sensitivity with almost no matrix interference. The limit of quantitation for pendimethalin was 1.21 ng/mL, whereas the overall recoveries ranged from 95.7 to 103.3%. The new method has been successfully applied to non‐stop measure of 200 real samples, without contamination of ion source. Detection results of the samples agreed well with standard method.     

以亚临界水为流动相的高效液相色谱方法的进展

由于纯水在高温高压下形成亚临界液体水时氢键网络发生改变,导致其极性、粘度等物理性质产生较大的变化。以亚临界水为流动相的高效液相色谱方法(SubWC)是近年来发展起来的一种新型分离技术。SubWC的仪器系统可以采用通过改装的一般的气相色谱(GC)或液相色谱(LC)装置;分离色谱柱既可以采用液相色谱填充柱,也可以采用类似于GC的毛细管柱;选择性既可以通过调节柱系统的温度和压力,也可以通过在流动相中添加有机调节剂或盐类进行调节;检测既可用氢火焰离子化检测器检测,也可用紫外检测器检测,极大地拓宽了色谱分离和最佳条件选择的范围。SubWC无论在仪器系统、流动相的洗脱还是固定相的选择等方面均有一定的特征。这种新的分离模式目前尚处于研究与开发阶段,且多用于极性、中等极性样品的快速分离。     

Separation of diarylethene-based photoswitchable isomeric compounds by high-performance liquid chromatography and supercritical fluid chromatography

Diarylethene-based photoswitches have become very popular over the last few decades for potential applications in chemistry, materials science, and biotechnology due to their unique physical and chemical properties. We report the isomeric separation of a diarylethene-based photoswitchable compound using high-performance liquid chromatography. The separated isomers were characterized by ultraviolet-visible spectroscopy and mass spectrometry confirmed the isomeric nature of the compounds. The isomers were purified by preparative high-performance liquid chromatography, providing fractionated samples to study the isomers individually. A total amount of 13 mg of an isomer of interest was fractionated from a solution of 0.4 mg/ml of the isomeric mixture. Because the preparative high-performance liquid chromatographic method required large quantities of solvent, we explored the use of supercritical fluid chromatography as an alternative separation mode which, to the best of our knowledge, is the first time this technique is used to separate diarylethene-based photoswitchable compounds. Supercritical fluid chromatography provided faster analysis times while maintaining sufficient baseline resolution for the separated compounds and consuming less organic solvent in the mobile phase compared to high-performance liquid chromatography. It is proposed that the supercritical fluid chromatographic method be upscaled and used in future fractionation of the diarylethene isomeric compounds, becoming a more environmentally benign approach for compound purification.