Polymerization of vinylcarbazole on copper(II)-13X molecular sieves: Role of copper(II) salts

Copper(II)-exchanged-13X molecular sieves, prepared from four copper(II) salts, namely, sulfate, nitrate, chloride, and acetate, and their activities in the polymerization of N-vinylcarbazole at a fixed copper ion exchange level were studied. From the kinetic characteristics of polymerization it was established that the variation in activities of the Cu-exchanged sieves is due primarily to the difference in the pH of the original salt solution, which is responsible for the varying degree of proton exchange with the zeolite during copper ion exchange. A first-order dependence of the rate of polymerization was observed with respect to H⁺ ion concentration of the original copper-salt solution. It was further established that the rate of polymerization of exchanged copper ion, at a hypothetical zero proton concentration, is low. A mechanism of polymerization of NVC on copper-exchanged-13X zeolite was suggested on the basis of the results obtained.     

Solid-state thermal polymerization of sodium acrylate

Initiation and propagation processes in thermally initiated solid-state polymerization of sodium acrylate have been studied. The kinetics of initiation, followed with the electron spin resonance technique, leads to an activation energy E of 28.8 kcal/mol, which is attributed to the formation of dimeric radicals. The activation energy of 16 ± 1 kcal/mol obtained for the solid-state polymerization of sodium acrylate by chemical analysis and differential scanning calorimetry has been attributed to the propagation process.     

Studies on the kinetics of ceric-thiourea initiated aqueous polymerization of methyl methacrylate—II. Mechanistic features in strongly acid solutions

The kinetics of ceric-thiourea initiated aqueous polymerization of methyl methacrylate in 1 M H₂SO₄ have been studied. Ceric ion and thiourea initially form an 1:1 complex which then reacts with uncomplexed ceric ion to form the initiating thiocarbamido radicals. The termination is predominantly biomolecular below an initial ceric concentration of 0.66 × 10^?2 M (depending upon the rate of initiation). At higher initial ceric concentrations, polymer radicals are terminated overwhelmingly by ceric ions. Substituted thioureas reduce the rate of polymerization according to the order of increasing electron density on the sulphur atom. The overall activation energy of polymerization is 12.1 kcal/mol in the region of bimolecular termination and 10.2 kcal/mol in the region of metal ion termination.     

Hydrophobic Effects of o-Phenanthroline and 2,2′-Bipyridine on Adsorption of Metal(II) Ions onto Silica Gel Surface

The effects of o-phenanthroline and 2,2′-bipyridine on the adsorption of metal(II) (Fe, Co, Ni and Cu) ions onto silica gel surface have been studied. The adsorption is expressed in terms of the measured concentrations of both metal and ligand at equilibrium. Each adsorption of the four metal ions is increased with the presence of the ligands. In addition, adsorption increases slowly with pH at low pH values and then increases rapidly up to near the pK_a value of silica gel (≈6.5). The adsorption of each metal ion at low pH is increased with increased ligand concentration. However, at high pH the adsorptions of Fe(II) and Cu(II) are decreased with increased ligand concentration whereas the adsorptions of Co(II) and Ni(II) are always increased. At low pH values the ligand to metal ratio adsorbed on the silica gel surface is ca. 3:1 while at high pH values it is 1:1, 2:1, and 3:1, corresponding to the initial ligand to metal ion concentration ratio. The addition of ethanol to the phenanthroline-SiO₂ solution results in a decrease in the adsorption of phenanthroline. The effect of ethanol is also observed in the Fe(II)-phenanthroline-SiO₂ system. The behavior of the adsorption is interpreted qualitatively by hydrophobic expulsion, the formation of surface complexes, and electrostatic interaction. It is concluded that hydrophobic expulsion plays an important role in the adsorption of metal ions in the presence of hydrophobic ligands on silica gel surface.     

Catalytic action of metallic salts in autoxidation and polymerization. IV. Polymerization of methyl methacrylate by cobalt(II) or (III) acetylacetonate–tert-butyl hydroperoxide or dioxane hydroperoxide

Polymerization of methyl methacrylate was carried out by four initiating systems, namely, cobalt(II) or (III) acetylacetonate–tert-butyl hydroperoxide (t-Bu HPO) or dioxane hydroperoxide (DOX HPO). Dioxane hydroperoxide systems were much more effective for the polymerization of methyl methacrylate than tert-butyl hydroperoxide systems, and cobaltous acetylacetonate was more effective than cobaltic acetylacetonate in both hydroperoxides. The initiating activity order and activation energy for the polymerization were as follows: Co(acac)₂–DOX HPO (E_a-9.3 kcal/mole) > Co (acac)₃–DOX HPO (E_a = 12.4 kcal/mole) > Co(acac)₂–t-Bu HPO (E_a = 15.1 kcal/mole) > Co(acac)₃–t-Bu HPO (E_a-18.5 kcal/mole). The effects of conversion and hydroperoxide concentration on the degree of polymerization were also examined. The kinetic data on the decomposition of hydroperoxides catalyzed by cobalt salts gave a little information for the interpretation of polymerization process.     

Poly(N‐acetyl‐α‐acrylic acid): Synthesis,Characterization and Chelation Properties through Liquid Phase Polymer‐Based Retention Technique

The synthesis and characterization of the water‐soluble poly(N‐acetyl‐α‐acrylic acid) by radical polymerization were carried out. The polymer was characterized by Fourier Transform Infrared (FT‐IR), ¹H NMR and ¹³C NMR spectroscopies, and thermogravimetric analysis (TGA). The metal ion binding properties for the metals Cu(II), Co(II), Ni(II), Cd(II), Zn(II), Pb(II), Hg(II), Cr(III) in the aqueous phase were studied using the liquid‐phase polymer‐based retention technique. The metal ion interactions with the hydrophilic polymer were determined as a function of pH and of the filtration factor. The polychelatogen showed a high affinity for metal ions and higher selectivity for Cr(III) at pH = 3.     

Vinyl polymerization initiated by peroxydiphosphate. V. Polymerization of acrylonitrile initiated by peroxydiphosphate-cyclohexanol redox system in the presence of silver ion

The polymerization of acrylonitrile was carried out using peroxydiphosphate-cyclohexanol redox system in the presence of silver ion. The rate of polymerization increases with increasing peroxydiphosphate concentration and the initiator exponent was computed to be 0.5. The rate of polymerization increases with increasing monomer concentration and the monomer exponent was computed to be unity. The plot of R_p vs [Ag⁺]^1/2 was linear, indicating 0.5 order with respect to [Ag⁺]. The reaction was carried out at three different temperatures and the overall activation energy was calculated to be 7.60 kcal/mol. The effect of certain surfactants on the rate of polymerization has been investigated and a suitable kinetic scheme has been pictured.     

Polymerization of butadiene by polybutadienyllithium in the presence of tetrahydrofuran

Polymerization of butadiene by polybutadienyllithium (PBLi) has been studied in THF for concentrations of PBLi between 10^?4 and 10^?2 mol/I in the range 20–70°, and also in a non-polar medium using THF as an added electron donor at various THF/PBLi ratios. The kinetic order with respect to PBLi in THF was 0.5 and the activation energies of the overall process and the propagation on free carbanions were 7.5 and 6.7 kcal/mol respectively. Rate constants for propagation on the free carbanions were calculated at three temperatures and rate constants for propagation on contact ion pairs were determined at two THF/PBLi ratios. Data on the kinetics of polymerization and the microstructure of the polymers suggest that contact ion pairs and free carbanions participate in propagation reactions.     

Syndiotactic 1,2-polybutadiene with Co-CS2 catalyst system. III. 1H- and 13C-NMR study of highly syndiotactic 1,2-polybutadiene

The ¹H and ¹³C-NMR spectra of highly crystalline syndiotactic 1,2-polybutadiene (s-PB) are discussed in order to clarify the mechanism of butadiene polymerization with cobalt compound–organoaluminum–CS₂ catalysts. Cis opening of the double bonds in the syndiotactic polymerization is affirmed by the study of the copolymer from perdeuteriobutadiene and cis,cis-1,4-dideuteriobutadiene. S-PB (mp 210°C) has 99.7% 1,2 units, 0.3% isolated cis-1,4 units, and 99.6% syndiotacticity. Polymer ends (2-methyl-3-butenyl group and conjugated diene structure) are also determined. The differences in free energy of activation between 1,2 and cis-1,4 propagation and between syndiotactic and isotactic propagation are 14.0 and 9.6 kcal/mol, respectively, for Co(acac)₃-AlEt₃-AlEt₂Cl-CS₂, and 6.7 and 5.7 kcal/mol, respectively, for the aluminum-free Co(C₄H₆)(C₈H₁₃)CS₂ system. The conformation of s-PB in o-dichlorobenzene at 150°C is described by the sequence (tt)_1.6(gg)(tt).     

Removal of Cu(II), Zn(II) and Co(II) ions from aqueous solutions by adsorption onto natural bentonite

In this study, the removal of Cu(II), Zn(II) and Co(II) ions from aqueous solutions using the adsorption process onto natural bentonite has been investigated as a function of initial metal concentration, pH and temperature. In order to find out the effect of temperature on adsorption, the experiments were conducted at 20, 50, 75 and 90 °C. For all the metal cations studied, the maximum adsorption was observed at 20 °C. The batch method has been employed using initial metal concentrations in solution ranging from 15 to 70 mg L⁻¹ at pH 3.0, 5.0, 7.0 and 9.0. A flame atomic absorption spectrometer was used for measuring the heavy metal concentrations before and after adsorption. The percentage adsorption and distribution coefficients (K _d) were determined for the adsorption system as a function of adsorbate concentration. In the ion exchange evaluation part of the study, it is determined that in every concentration range, adsorption ratios of bentonitic clay-heavy metal cations match to Langmuir, Freundlich and Dubinin-Kaganer-Radushkevich (DKR) adsorption isotherm data, adding to that every cation exchange capacity of metals has been calculated. It is shown that the bentonite is sensitive to pH changes, so that the amounts of heavy metal cations adsorbed increase as pH increase in adsorbent-adsorbate system. It is evident that the adsorption phenomena depend on the surface charge density of adsorbent and hydrated ion diameter depending upon the solution pH. According to the adsorption equilibrium studies, the selectivity order can be given as Zn²⁺>Cu²⁺>Co²⁺. These results show that bentonitic clay hold great potential to remove the relevant heavy metal cations from industrial wastewater. Also, from the results of the thermodynamic analysis, standard free energy ΔG ⁰, standard enthalpy ΔH ⁰ and standard entropy ΔS ⁰ of the adsorption process were calculated.     

Effect of Cu(II)/H2 Salen complex on the non-conventional initiated emulsion polymerization of acrylonitrile

Radical polymerization of acrylonitrile was carried out in an emulsifier-free condition initiated by KHSO₅ catalyzed with Cu(II)/bis-salicylidene ethylene diamine (H₂ Salen) complex. The Cu(II) salt alone, Cu(II)/salicylaldehyde and Cu(II)/ethylene diamine have a retarding effect on the polymerization reaction, while the chelate of Cu(II) with the tetradentate Schiff base ligand, H₂ Salen has a catalytic effect. Prior to this, the catalytic effect of various bivalent transition metal salts and their couple with the Schiff base, H₂ Salen on the polymerization reaction has been examined to be not significant. The in situ developed complex produces the stable emulsion leading to high conversion. In the polymerization, the variables studied were the concentration of monomer, initiator, Cu(II), H₂ Salen and temperature. The overall activation energy was computed to be 13.1 kcal/mol. From the kinetic and spectral analyses, the mechanism of the initiator decomposition and initiation of polymerization by Cu(II)/H₂ Salen complex were suggested. The rate of polymerization (R_p) was found to be dependent on the monomer, initiator, Cu(II) ion, H₂ Salen concentrations to the 1.4, 0.3, 1.6, 1.5 power respectively. The polymers are characterized by IR and molecular weight by viscosity and GPC methods.     

Kinetic Study of 1-β-Cyanoethyl Aziridine for Ring-Opening Polymerization Initiated with Alkyl Sulfate

The kinetics of the cationic polymerization of 1-β-cyanoethyl aziridine initiated 3-hydroxy- 1-propane sulfonic acid sultone and methyl tosylate have been studied. The course of polymerization involved the propagation stage and termination reaction due to the reaction between the growing chain and imino groups in the polymer chain. The propagation constants and termination constants were obtained. The enthalpies of activation for the propagation and termination reactions are ΔH_p? = 12.9 kcal/mol and ΔH_t? = 12.4 kcal/mol, and the entropies of activation are ΔS_p? = -31 cal/deg·mol and ΔS_t? = -39 cal/deg·mol. Otherwise, the polymerization initiated with methyl tosylate involved an early stage which was initiated very quickly.     

Chelating properties of poly(N‐acryloyl piperazine) by liquid‐phase polymer‐based retention (LPR) technique

The synthesis of poly(N‐acryloylpiperazine) was carried out by radical polymerization giving a yield of 90%. The polymer was soluble in water and was characterized by FTIR, ¹H NMR, ¹³C NMR spectroscopy, and TGA. The metal ability binding properties for the Ag(I), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Pb(II), and Cr(III) metal ions in the aqueous phase were investigated using the liquid‐phase polymer‐based retention (LPR) method. The metal ion interactions with the hydrophilic polymers were determined as a function of pH and filtration factor.     

Study on the Kinetics of Polymerization of Tributyltin Methacrylate

The kinetics of polymerization of tributyltin methacrylate (TBTM) has been studied in benzene solution in the temperature range 60–75°C in the presence of azobisisobutyronitrile (AIBN). We have obtained the following polymerization rate equation: R _p = K _p [TBTM]^1.5 [AIBN]^0.5. It shows that the dependence of the polymerization rate on the concentrations of the monomer TBTM and the initiator AIBN are 1.5 and 0.5 order, respectively. The activation energy of polymerization was found to be 18.1 kcal/mol. The activation energy for the degree of polymerization is approximately -12.3 kcal/mol.     

An Experimental Study of the Influence of Weak Convection on Perikinetic Coagulation

Divalent cobalt and iron removal from aqueous solutions by batch ion exchange with a synthetic Na-Y zeolite has been studied under competitive and noncompetitive conditions. The binary Co/Na and Fe/Na ion-exchange equilibrium isotherms, constructed at 291+/-2 K and a total solution positive charge concentration of 0.1 eq dm(-3), exhibited sigmoidal shapes that are attributed to an exchange site heterogeneity. The solution pH and the ratio of sorbate to sorbent are identified for which minimal imbibition of metal hydroxide and maintenance of zeolite structural integrity are ensured. An increase in Fe and Co concentration over the range 0.005-0.05 mol dm(-3) lowered the removal efficiency but the external Fe was preferred to the indigenous sodium over the entire concentration range; there was a switch in preference from Co to Na at [Co] in excess of 0.034 mol dm(-3). Exchange data for Cu(2+)/Na(+) and Ni(2+)/Na(+) binary systems are included for comparative purposes, and ion exchange affinity and Na-Y exchange capacity are discussed in terms of metal ion hydration and ion location. The effect of exchange temperature has been considered where the maximal Fe exchange was temperature independent while Co exchange was promoted with increasing temperature. A Co/Fe/Na-Y ternary exchange isotherm was constructed from 20 pairs of experimental points and is treated quantitatively in terms of ternary and pseudo-binary separation factors. The preference of the zeolite for exchange with iron over cobalt under noncompetitive conditions also extended to solutions containing both metals. Copyright 2000 Academic Press.     

Water-soluble Polyelectrolytes Contaning Sulfonic Acid Groups with Metal Ion Binding Ability by Using the Liquid Phase Polymer Based Retention Technique

Water-soluble polyelectrolytes from 2-acrylamido-2-methyl-1-propane sulfonic acid (APSA) were obtained by radical polymerization with different comonomers which contain weak acid and neutral groups. These copolymers were investigated as polyelectrolytes and polychelatogens, in view of their metal ion binding properties using the liquid-phase polymer-based retention (LPR) technique under different experimental conditions. The metal ions investigated were: Ag(I), Co(II), Cu(II), Zn(II), Cd(II), and Pb(II). APSA allowed increase metal ion interaction of weak acid, meanwhile did not improve the metal ion interaction of neutral monomers at these experimental conditions. Results indicated that retention capability depended strongly on the structure of the polyelectrolyte, arrangement of comonomers at main chain, pH, and the filtration factor, Z.     

Complexation and sorption studies of Co(II) with γ-alumina-bound fulvic acid: effect of pH,ionic strength,fulvic acid and alumina concentration

The removal of heavy metal ion Co(II) from aqueous solution is studied using γ-Al₂O₃ by batch technique. The experiments are performed at T = 20 ± 2 °C, in 0.01 M NaNO₃ solutions and under aerobic conditions. The effect of pH, ionic strength, fulvic acid (FA) and alumina concentration on the sorption of Co(II) on alumina are also respectively investigated. The pH affects the sorption of Co(II) significantly as compared with the effect of FA and ionic strength. The results indicate that strong chemical bonds are formed between Co(II) and the bare or FA coated alumina surface, and a transition from the adsorption to surface-induced precipitation of Co(II) on alumina surface takes place. The addition sequences of Co/FA on Co(II) sorption is also studied and the results indicate that the sorption of Co(II) in ternary system is independent of addition sequences. The results also suggest that the sorption of metal ions on mineral surface depends on the nature of mineral, nature of organic ligand and nature of metal ion.     

Vinyl polymerization of acrylamide initiated by Thallium(III) ions in solution

Kinetics of polymerization of acrylamide initiated by Thallium(III) perchlorate was investigated in aqueous perchloric acid medium in the temperature range of 55–70°C. The rates of polymerization were measured varying the concentration of the monomer, initiator, and perchloric acid. The rate of polymerization was found to increase with increase of temperature, monomer concentration, initiator concentration, and perchloric acid concentration. The effect of additives like different solvents, surfactants, and retarders on the rate of polymerization was studied. Molecular weights of the polymer were determined by viscometry. The chain transfer constants for the monomer (C_M) and that for the solvent dioxan (C_s) were calculated to be 7.33 × 10^?3 and 6.66 × 10^?3, respectively. From the Arrhenius plot, the overall activation energy (E_a) was calculated to be 10.68 kcal/mol. The energy of initiation was calculated to be 12.36 kcal/mol. Depending on the results obtained, a suitable reaction mechanism has been suggested and a rate equation has been derived.     

Kinetics of the reaction of aluminum EDTA and cobalt(II) EDTA with calmagite

The reaction of aluminum EDTA with calmagite was found to be first-order in calmagite, half-order in aluminum EDTA, and zero-order in excess EDTA. The three-halves-order apparent rate constant at pH 9.48 and 20°C with ionic strength 0.30 was 0.232 ± 0.0141^{$\text{1}\text{2}$} · mol^{$\text{1}\text{2}$} · s^?1. The activation energy was 3.2 ± 0.3 kcal/mol. The pH dependence was complex between 8 and 10. The mechanism proposed is a rapid dissociation of a dimer of aluminum EDTA to a monomer followed by a rate-determining displacement of the EDTA by calmagite. The reaction of Co(II) EDTA with calmagite was confirmed to be first-order in Co(II) EDTA and first-order in calmagite with an activation energy of 7.5 ± 0.6 kcal/mol.     

Metal-Containing Initiator Systems. 30. Vinyl Polymerization Initiated with Bis(ethyl acetoacetato)copper(II) and Maleimide

Some electron-accepting compounds such as maleimide (MIm), maleic anhydride (MAn), and tetracyanoquinodimethane were found to show pronounced accelerating effects on vinyl polymerization initiated with metal chelates. The polymerization of methyl methacrylate (MMA) initiated with bis(ethyl acetoacetato)-copper(II) (Cu(eacac)₂) and MIm was studied kinetically in benzene. The overall activation energy of the polymerization was calculated to be 11.5 kcal/mol. This value was much lower than that (17.6 kcal/mol) for the polymerization of MMA with Cu(eacac)₂ alone. The polymerization rate (R_p) was expressed as R_p =k[MIm]^1/2 [Cu(eacac)₂]^1/2 [MMA] The first-order dependence of R_p on the monomer concentration indicated that the monomer had no participation in the initiation step, in contrast with polymerization in the absence of MIm (where a monomer concentration dependence of 1.4th order was observed). Electronic spectroscopic study revealed that a complex between MIm and Cu(eacac)₂ had been formed. The ligand radical, an acetylcarboethoxymethyl radical, was trapped by 2-methyl-2-nitrosopropane in the reactions of Cu(eacac)₂ with MIm and with MAn in benzene. From these results the mechanism of the initiation of polymerization is discussed.