Phase transformation and enhancement of toughness in polyvinylidene fluoride by onium salts

We study the effect of onium salts (benzyl triphenyl phosphonium chloride, BTPC; tetrabutyl ammonium perchlorate, TAP) on the crystallization of polyvinylidene fluoride (PVDF) from a melt. The β phase of PVDF crystals is polar and has excellent piezoelectric properties, in contrast to the nonpolar α phase. Processing of PVDF results in the formation of predominantly α‐phase crystals. Different amounts of the onium salts were melt‐mixed into PVDF using a micro‐compounder. PVDF containing about 0.5 wt % of BTPC is found to have predominantly β‐phase crystals in compression molded PVDF films, with an increase in the melting temperature by about 7 °C. A significant increase in the toughness of PVDF is obtained by the addition of BTPC. Polarizing microscopy indicates that the onium salts act as nucleating agents and result in significant reduction in spherulite size. Similar results were observed for samples prepared with TAP. The results of the study indicate a facile method for producing β‐phase PVDF films. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1339–1344, 2011     

Improvement in the blood compatibility of polyvinylidene fluoride membranes via in situ cross‐linking polymerization

In this study, we have provided a highly efficient, convenient, and universal protocol for preparing polyvinylidene fluoride (PVDF) membranes with low blood contact activation via in situ cross‐linking copolymerization of 2‐hydroxyethl methacrylate (HEMA) and acrylic acid (AA) in a solution of PVDF. The modified membranes were prepared from PVDF solution by phase inversion technology. The composition and morphology of the modified membranes were confirmed by attenuated total reflectance‐Fourier transform infrared (ATR‐FTIR) spectroscopy, thermogravimetric (TG) analysis, and scanning electron microscopy (SEM). Protein adsorption, clotting time, and contact activation on the modified PVDF membranes were systematically studied, the results indicating that after the incorporation of AA and HEMA, the modified PVDF membranes possessed anticoagulant properties in addition to low contact activation of blood components when in contact with blood. Therefore, fluorinated PVDF membranes with surfaces enriched with carboxyl and hydroxyl groups possessed the potential for use in long‐term blood‐contacting devices.     

Liquid Crystal Elastomer Actuators from Anisotropic Porous Polymer Template

Controlling self‐assembly behaviors of liquid crystals is a fundamental issue for designing them as intelligent actuators. Here, anisotropic porous polyvinylidene fluoride film is utilized as a template to induce homogeneous alignment of liquid crystals. The mechanism of liquid crystal alignment induced by anisotropic porous polyvinylidene fluoride film is illustrated based on the relationship between the alignment behavior of liquid crystals and surface microstructure of anisotropic polyvinylidene fluoride film. Liquid crystal elastomer actuators with fast responsiveness, large strain change, and reversible actuation behaviors are achieved by the photopolymerization of liquid crystal monomer in liquid crystal cells coated with anisotropic porous films.

     

Electrospinning of ultrafine PVDF/PC fibers from their dispersed solutions

Dispersed solutions of poly(vinylidene fluoride) (PVDF)/polycarbonate (PC) in the mixed solvent of N,N‐dimethylformamide (DMF)/tetrahydrofuran (THF) were used to electrospin in order to discuss the relationship between the properties of the polymer dispersions and the morphology of the obtained ultrafine fibers. With the changes of the mass ratio of PVDF/PC, the relative molecular mass of PVDF, and the volume ratio of DMF/THF, the morphology and the microstructure of the prepared PVDF/PC ultrafine fibers altered in accord with the viscosity, surface tension, and conductivity of the PVDF/PC dispersions. When the PVDF/PC mass ratio varied from 9/1 to 5/5, the ability of the polymer chain entanglement in PVDF/PC dispersion decreased as to the lower relative molecular mass of PC and higher chain rigidity, which lead to the formation of the beaded fibers together with the distinct core/shell structure. Similar phenomenon was also found when the lower molecular mass of PVDF was used instead of a higher one. Though the change of DMF/THF volume ratio did not specifically contribute to the properties of PVDF/PC dispersions, the accelerated evaporation and solubility of the mixed solvent by the THF amount increasing was feasible to generate the uniform fibrous morphology and the distinct core/shell structure. © 2009 Wiley Periodicals, Inc.J Polym Sci Part B: Polym Phys 48: 372–380, 2010     

Computational analysis of bending strain in single chains of β‐PVDF

Hartree–Fock calculations on 20 carbon atom chains of β‐phase poly(vinylidene fluoride) (PVDF) were done as a function of bending strain. The results can be modeled in terms of a classical energy versus strain curve resulting in a pseudomodulus (310 GPa) comparable to the Young's modulus calculated for stretching along carbon atom chain (199 GPa). The model also shows that the minimum energy state of a single chain of the polymer is not linear in the all‐trans geometry and that a significant strain energy is stored in natural thin films. This suggests that energy can be captured from bending motions in β‐PVDF. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1493–1495, 2011     

SEPARATION OF PROPANE FROM PROPANE/NITROGEN MIXTURES USING PDMS COMPOSITE MEMBRANES BY VAPOR PERMEATION

This study deals with polydimethylsiloxane(PDMS)/polyvinylidene fluoride(PVDF) composite membranes for propane separation from propane/nitrogen mixtures,which is relevant to the recovery of propane in petroleum and chemical industry.The surface and cross-section morphology of PDMS/PVDF composite membranes was observed by scanning electron microscope(SEM).The surface morphology of PDMS/PVDF composite membranes is very dense.There are three layers,the thin dense top layer,finger-like porous middle layer an...     

Fabrication and characterization of SiO2/PVDF composite nanofiber‐coated PP nonwoven separators for lithium‐ion batteries

SiO₂/polyvinylidene fluoride (PVDF) composite nanofiber‐coated polypropylene (PP) nonwoven membranes were prepared by electrospinning of SiO₂/PVDF dispersions onto both sides of PP nonwovens. The goal of this study was to combine the good mechanical strength of PP nonwoven with the excellent electrochemical properties of SiO₂/PVDF composite nanofibers to obtain a new high‐performance separator. It was found that the addition of SiO₂ nanoparticles played an important role in improving the overall performance of these nanofiber‐coated nonwoven membranes. Among the membranes with various SiO₂ contents, 15% SiO₂/PVDF composite nanofiber‐coated PP nonwoven membranes provided the highest ionic conductivity of 2.6 × 10^?3 S cm^?1 after being immersed in a liquid electrolyte, 1 mol L^?1 lithium hexafluorophosphate in ethylene carbonate, dimethyl carbonate and diethyl carbonate. Compared with pure PVDF nanofiber‐coated PP nonwoven membranes, SiO₂/PVDF composite fiber‐coated PP nonwoven membranes had greater liquid electrolyte uptake, higher electrochemical oxidation limit, and lower interfacial resistance with lithium. SiO₂/PVDF composite fiber‐coated PP nonwoven membrane separators were assembled into lithium/lithium iron phosphate cells and demonstrated high cell capacities and good cycling performance at room temperature. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1719–1726     

The polar anchoring energy of nematic liquid crystals with polyvinylidene fluoride alignment layer

It has been proved that the high dielectric polyvinylidene fluoride (PVDF) could be used as an alignment layer in liquid crystal device. In this paper, the transmittance, pretilt angle and the polar anchoring energy of the substrates with PVDF alignment layer were researched. Theoretical results and the experimental results about the reflectivity R_SS (polarisation-conserving signals) recorded by full-leaky guided mode in liquid crystal technique are analysed to evaluate the anchoring energy of PVDF alignment layer. The result shows that the polar anchoring energy between PVDF alignment layer and liquid crystal molecules is 2.80 × 10^?4 J/m².     

On the validity of crystallization kinetics parameters derived from the depolarized light intensity (DLI) technique: An experimental study of polyvinylidene fluoride

Although the depolarized light intensity technique has been known for some decades, the time dependence of light intensity does not yet seem to be well understood. In this article, devoted to the crystallization kinetics of polyvinylidene fluoride (PVDF), we present some of the problems associated with quantitative analysis. Parameters such as incident light intensity—in combination with the detection system—and specimen thickness are shown to dramatically affect the apparent kinetics. Experiments on single spherulites grown in very thin films can help interpret the intensity–time curve. Our results demonstrate that care should be taken when comparison is made between DLI and differential scanning calorimetry. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 997–1008, 1999     

TIPS法制备聚偏氟乙烯平板微孔膜及其表征

以邻苯二甲酸二甲酯(DMP)为稀释剂,采用热致相分离法(TIPS)制备了聚偏氟乙烯(PVDF)平板微孔膜。利用差示扫描量热仪分析了不同PVDF/DMP体系的结晶性能;通过测试纯水通量、孔隙率、泡点、平均孔径、拉伸强度等对膜进行了表征。结果表明:DMP含量增大,结晶温度向低温方向移动,膜拉伸强度降低,当DMP的质量分数为0.70时膜拉伸强度有明显拐点;PVDF/DMP体系冷却发生固-液相分离;PVDF含量增大,膜水通量、孔隙率、最大孔径和平均孔径均减小。     

Morphologies and crystalline forms of polyvinylidene fluoride membranes prepared in different diluents by thermally induced phase separation

We have studied the morphologies and crystalline forms of polyvinylidene fluoride (PVDF) membranes separately prepared in four different diluents bearing >C?O groups, namely 1,2‐propylene glycol carbonate (PGC), dimethyl phthalate (DMP), diphenyl ketone (DPK), and dibutyl phthalate (DBP), by the thermally induced phase separation (TIPS) method. The permittivities of the diluents and PVDF were measured to compare the different PVDF–diluent systems. The results showed the permittivity of PGC to be much greater than that of PVDF, and those of DMP and DBP to be lower than that of PVDF. The permittivity difference between DPK and PVDF was not apparent above 120 °C. On cooling mixtures with a PVDF concentration of 10 wt %, PVDF crystallization was observed in the PVDF–DMP, PVDF–DBP, and PVDF–PGC systems, while liquid–liquid phase separation occurred in the PVDF–DPK system. A cross‐section of the PVDF–PGC membrane presented smooth PVDF particles in the β‐phase crystalline form. Those of the PVDF–DMP and PVDF–DBP membranes presented PVDF particles consisting of a fibrillar network in the α‐phase. The PVDF–DPK membrane preferentially adopted an α‐phase bicontinuous channel structure. When the concentration of PVDF was 60 wt %, the cross‐sections of the above four membranes revealed PVDF polyhedra, among which the PVDF–DMP, PVDF–DBP, and PVDF–DPK membranes retained the α‐phase crystalline form, and the diffraction peak of the α‐phase became visible in the X‐ray diffraction (XRD) spectrum of the PVDF–PGC membrane. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

聚偏氟乙烯薄膜压电性的研究

本文研究了聚偏氟乙烯的压电性。聚偏氟乙烯薄膜是用DMA溶剂浇铸而成,然后进行单轴拉伸,并采用热驻极的方法使薄膜成极。实验结果表明,压电活性依赖于拉伸比、极化电场、极化温度和极化时间。此外,还研究了聚偏氟乙烯压电薄膜的稳定性和某些使用特性。     

PVDF膜改性的方法研究

本文介绍了目前国内外聚偏氟乙烯(PVDF)超滤膜改性中常用的膜表面改性方法和膜材料改性方法。PVDF膜表面改性主要通过膜表面的物理改性、磺化改性、表面接枝改性、光化学改性、低温等离子体改性等方法来实现;而PVDF膜材料的改性主要是通过PVDF与亲水性高分子材料或小分子无机粒子的共混以及膜材料本体的化学改性来实现。改性PVDF膜的亲水性增强,使水通量增加,提高了机械性能,改善了抗污染性,增加了膜的使用寿命。     

静电纺聚偏氟乙烯@硅藻土锂离子电池隔膜的制备及性能

以聚偏氟乙烯(PVDF)和硅藻土为原料,通过静电纺丝法制备PVDF@硅藻土复合纤维膜,用于锂离子电池隔膜。 研究了隔膜的吸液率、热稳定性和电化学性能等。 添加硅藻土可有效提高复合膜的电解液吸收率和电化学性能,其中吸液率可达623.6%,相比于PVDF膜和聚丙烯(PP)膜具有优异的循环性能和倍率性能。     

高β相聚偏氟乙烯基复合体系的制备及压电性能

为了提高聚偏氟乙烯(PVDF)的压电性能,需要寻找有效的途径来提高PVDF的电活性相(β相)含量。 通过水热法成功合成了Ag、ZnO以及二者复合(Ag-ZnO)的3种类型纳米粒子,并与PVDF共混形成PVDF复合薄膜。 通过表征PVDF复合材料的形貌,结晶性能和压电性能,可以发现Ag-ZnO复合纳米粒子的协同作用可以有效提高PVDF的结晶性能和压电性能。 此外,通过单轴拉伸可以使得所有PVDF膜的β相含量得到进一步提高,其中拉伸后的PVDF/Ag-ZnO纳米颗粒(P-C)的β相物质的量分数最高,达到70.0％,最佳的压电系数(d₃₃)达到了31.0 pC/N。     

Development of oriented structure and properties on drawing of poly(vinylidene fluoride) by solid‐state coextrusion

Gel films of poly(vinylidene fluoride) (PVDF) consisting of α‐form crystals were drawn uniaxially by solid‐state coextrusion to extrusion draw ratios (EDR) up to 9 at an optimum extrusion temperature of 160 °C, about 10°C below the melting temperature (T_m). The development of an oriented structure and mechanical and electrical properties on coextrusion drawing were studied as a function of EDR. Wide‐angle X‐ray diffraction patterns showed that the α crystals in the original gel films were progressively transformed into oriented β‐form crystals with increasing EDR. At the highest EDR of 9 achieved, the drawn product consisted of a highly oriented fibrous morphology with only β crystals even for the draw near the T_m. The dynamic Young's modulus along the draw direction also increased with EDR up to 10.5 GPa at the maximum EDR of 9. The electrical properties of ferroelectricity and piezoelectricity were also markedly enhanced on solid‐state coextrusion. The D–E square hysteresis loop became significantly sharper with EDR, and a remanent polarization P_r of 100 mC/m² and electromechanical coupling factor along the thickness direction k_t of 0.27 were achieved at the maximum EDR of 9. The crystallinity value of 73–80% for the EDR 9 film, estimated from these electrical properties, compares well with that calculated by the ratio of the crystallite size along the chain axis to the meridional small‐angle X‐ray scattering (SAXS) long period, showing the average thickness of the lamellae within the drawn β film. These results, as well as the appearance of a strong SAXS maximum, suggest that the oriented structure and properties of the β‐PVDF are better explained in terms of a crystal/amorphous series arrangement along the draw axis. Further, the mechanical and electrical properties obtained in this work are the highest among those ever reported for a β‐PVDF, and the latter approaches those observed for the vinylidene fluoride and trifluoroethylene copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1371–1380, 2001     

PVDF/PMMA dielectric films with notably decreased dielectric loss and enhanced high‐temperature tolerance

Polymer dielectrics generally have comparatively low dielectric constant, operating temperatures, and/or high dielectric loss, which limits their uses especially in harsh environment. In this article, a novel trilayered nanocomposite film (TNF) was constructed via solution‐casting and, subsequently, hot‐pressing process, which was composed of two outer layers of polyvinylidene fluoride (PVDF, high dielectric constant) and a middle layer of polymethyl methacrylate (PMMA, high glass transition temperature, T_g). The two outer layers of TNF were filled with barium strontium titanate nanoparticles to further increase the dielectric constant of PVDF. The PMMA in the middle layer was used to largely suppress the dielectric loss and simultaneously improve the temperature tolerance of TNF. Results show that the introduction of PMMA induced oriented crystal formation in the interface regions between PVDF and PMMA components. Moreover, most of the impurity ions were dramatically immobilized by partly oriented α crystals and high T_g PMMA layer until the temperature exceeded 120 °C. Therefore, the TNFs showed a high‐temperature tolerance and notably decreased loss, which are promising for widespread energy storage applications where harsh working conditions are present. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1043–1052     

Effect of biaxial orientation on dielectric and breakdown properties of poly(ethylene terephthalate)/poly(vinylidene fluoride‐co‐tetrafluoroethylene) multilayer films

Polymer films with enhanced dielectric and breakdown properties are essential for the production of high energy density polymer film capacitors. By capitalizing on the synergistic effects of forced assembly nanolayer coextrusion and biaxial orientation, polymer multilayer films using poly(ethylene terephthalate) (PET) and a poly(vinylidene fluoride‐co‐tetrafluoroethylene) [P(VDF‐TFE)] copolymer were produced. These films exhibited breakdown fields, under a divergent field using needle/plane electrodes, as high as 1000 kV mm^?1. The energy densities of these same materials, under a uniform electric field measured using plane/plane electrodes, were as high as 16 J cm^?3. The confined morphologies of both PET and P(VDF‐TFE) were correlated to the observed breakdown properties and damage zones. On‐edge P(VDF‐TFE) crystals induced from solid‐state biaxial stretching enhanced the effective P(VDF‐TFE) layer dielectric constant and therefore increased the dielectric contrast between the PET and P(VDF‐TFE) layers. This resulted in additional charge buildup at the layer interface producing larger tree diameters and branches and ultimately increasing the breakdown and energy storage properties. In addition to energy storage and breakdown properties, the hysteresis behavior of these materials was also evaluated. By varying the morphology of the P(VDF‐TFE) layer, the low‐field dielectric loss (or ion migration behavior) could be manipulated, which in turn also changed the observed hysteresis behavior. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 882–896     

Thermally induced phase separation of poly(vinylidene fluoride)/diluent systems: Optical microscope and infrared spectroscopy studies

Thermally induced phase separation (TIPS) has been developed to prepare porous membranes. The porous structures are mainly dependent on diluents adopted in the TIPS process. We obtained two typical morphologies of poly(vinylidene fluoride) (PVDF) membranes using cyclohexanone (CO) and propylene carbonate (PC) as diluents, respectively. SEM observation displays that porous spherulites are formed from PVDF/CO system, whereas smooth particles result from PVDF/PC system. The TIPS processes of these two systems have been investigated in detail by optical microscope observation and temperature‐dependent FTIR combined with two‐dimensional infrared correlation analysis. Rapid crystallization of PVDF can be seen around 110 °C in the PVDF/CO system, which is consistent with the results of temperature‐dependent FTIR spectra. The spectral evolution indicates a transform of PVDF from amorphous to α‐phase after 110 °C. The ν_s(C?O) band at 1712 cm^?1 narrows and the ν_s(C? F) band at 1188 cm^?1 shifts to 1192 cm^?1 before crystallization, which implies the destruction of interaction between PVDF and CO. In contrast, the PVDF/PC system shows slow crystallization with all‐trans conformation assigned to β‐phase and γ‐phase below 60 °C but no obvious change of polymer?diluent interaction. We propose two mechanisms for the different phase behaviors of PVDF/CO and PVDF/PC systems: a solid?liquid phase separation after destruction of polymer?diluent interaction in the former, and a liquid?liquid phase separation process coupled with rich‐phase crystallization in the later. This work may provide new insight into the relationship among morphologies, crystal forms, and phase separation processes, which will be helpful to adjust membrane structure. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1438–1447     

Study on polyvinylidene fluoride as alignment layer in twist-nematic liquid crystal display

The material with high dielectric constant can significantly affect the distribution of the electric field, so this kind of material has great potential in liquid crystal display. In this paper, polyvinylidene fluoride (PVDF) as alignment layer in liquid crystal display was analysed. The optical property, mechanical property, thermal stability and electrical property of PVDF were measured. Experiments show that the absorbance of PVDF material is 0.2 (or less) in visible light, which is better than the conventional alignment material polyimide (PI). The alignment effect can be generated by mechanical friction and the liquid crystal molecules are ordered or aligned, and PVDF can maintain good thermal stability as temperature is lower than 400°C. Since the dielectric constant of PVDF is usually between 6.0 and 8.0, it has significant effect on the distribution of the electric field in the liquid crystal display, and its dielectric loss is also less than PI. The lower operating voltage and the faster response time are obtained from the experiment. It can be confirmed by the experiments that PVDF could be used in liquid crystal display (LCD) as the alignment layer to improve LCD’s characteristics.