Photo‐initiated thiol–ene “click” hydrogels from RAFT‐synthesized poly(N‐isopropylacrylamide)

Despite the efficiency and robustness of the widely used copper‐catalyzed 1,3‐dipolar cycloaddition reaction, the use of copper as a catalyst is often not attractive, particularly for materials intended for biological systems. The use of photo‐initiated thiol‐ene as an alternative “click” reaction to synthesize “model networks” is investigated here. Poly(N‐isopropylacrylamide) precursors were synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization and were designed to have trithiocarbonate moieties as end groups. This structure design provides opportunity for subsequent end‐group modifications in preparation for thiol‐ene “click.” Two reaction routes have been proposed and studied to yield thiol and ene moieties. The advantages and disadvantages of each reaction path were investigated to propose a simple but efficient route to prepare copper‐free “click” hydrogels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4626–4636     

Pyrene functional poly(vinyl alcohol) by “click” chemistry

Side‐chain pyrene functional poly(vinyl alcohol) (PVA) was synthesized by using “click chemistry” strategy. First, partial tosylation of PVA with p‐toluene sulfonyl chloride were performed. The resulting PVA‐Ts polymer was then quantitatively converted into poly(vinyl alcohol)‐azide (PVA‐N₃) in the presence of NaN₃/DMF at 60 °C. Propargyl pyrene was prepared independently as a photoactive click component. Finally, azido functionalized PVA was coupled to propargyl pyrene with high efficiency by click chemistry. Incorporation of pyrene functionality in the resulting polymer was confirmed by spectral analysis. It is also shown that pyrene functionalized PVA (PVA‐Py) exhibited characteristic fluorescence properties and improved solubility in highly polar solvents such as water, DMSO, and DMF as well as less polar solvent such as THF compared with pristine PVA. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1317–1326, 2009     

“Click” chemistry for in situ formation of thermoresponsive P(NIPAAm‐co‐HEMA)‐based hydrogels

The strategy for in situ chemical gelation of poly(N‐isopropylacrylamide‐co‐hydroxylethyl methacrylate) [P(NIPAAm‐co‐HEMA)]‐based polymers was demonstrated. Two types of new P(NIPAAm‐co‐HEMA) derivatives with alkyne and azide pendant groups, respectively, were prepared. When the solutions of the two derivatives were mixed together, a crosslinking reaction, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition, in the presence of Cu(I) catalyst occurs. The morphology, equilibrium swelling ratio, swelling kinetics, and temperature response kinetics of the in situ gelated hydrogels were studied. In comparison with the conventional PNIPAAm hydrogel, because of the spatial hindrance of polymeric chains, the resulted hydrogels had a macroporous structure as well as a fast shrinking rate. The strategy described here presents a potential alternative to the traditional synthesis techniques for the in situ formation of thermoresponsive hydrogels. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5263–5277, 2008     

The “disturbing zone” in overpressure layer chromatography (OPLC)

This paper describes the fundamental factors causing the “disturbing zone” in OPLC. This phenomenon of distorted substance zones appears when the OPLC separation is started with a dry layer and is due to interaction between the gas that is physically bound to the surface of the sorbent (m_a) and the gas molecules dissolved in the eluent (m_s). Possibilities for elimination of the adverse effects of disturbing zones ultimately depend on the establishment of operating conditions that inhibit their initial formation. Since modification of the location of the disturbing zone is only possible within a very narrow range, the sole solution to this problem is to conduct a pre-run, which may be carried out with hexane in the case of separation of apolar compounds. For separation of polar substances, the pre-run may also be performed with hexane or with a solvent of the mobile phase in which the components are unable to migrate. The selection of this solvent may be considered during the optimization of the eluent system.     

Hopping conduction in “pure” polypropylene

A recently developed theory of steady-state conduction in high-density polyethylene is applied to “pure” polypropylene (PP) in the temperature range 50–93°C. Morphological changes occur in PP, including a disordered-amorphous to monoclinic-amorphous transition between 50 and 80°C, where, with increasing temperature T, free volume increases, and decreases with decreasing amorphous fraction. The latter competing processes lead to large increases in hopping site separation, λ, in the transition region, followed either by saturation or a maximum in λ vs. T. We speculate that segmental and/or main chain molecular motions lower apparent activation energies, are “pinned“ by applied field, and impeded by dangling bonds in regions surrounding the surfaces of crystallites. Our analysis is semi-quantitative only, because the latter mechanisms have not been adequately quantified, and the relative contributions of each are unknown. Measurements were carried out on heated and cooled disordered-amorphous, and 106°C, 17-h annealed, 43% crystalline samples. Hopping distances, obtained from measured current vs. applied field characteristics, ranged from 1.2 to 5.2 nm. Apparent activation energies up to 1.80 eV were obtained from In (I/T) vs. (1/T) plots. Remarkable plateaus in the temperature range of the transition were observed in these plots, implying some carrier conduction with near zero activation energy. Possible explanations for the latter, and the electronic nature of the carriers are given. X-ray and density flotation measurements enabled crystallinity determinations. © 1994 John Wiley & Sons, Inc.     

Synthesis of a “molecular rope curtain”: Preparation and characterization of a sliding graft copolymer with grafted poly(ethylene glycol) side chains by the “grafting onto” strategy

A sliding graft copolymer (SGC) with poly(ethylene glycol) (PEG) side chains was prepared by ester formation between terminal carboxyl groups of oxidized PEG methyl ether with molecular weight of 2000 (mPEG2000‐COOH) and hydroxyl groups of a polyrotaxane consisting of PEG and cyclodextrins (CDs). Formation of the SGC structure was confirmed by ¹H NMR, attenuated total reflectance Fourier‐transformed infrared, and gel permeation chromatography. The SGC was soluble in good solvents of PEG and insoluble in poor solvents of PEG. Estimation of the number of grafted mPEG chains suggested a “rope‐curtain” like structure, in which an mPEG chain is connected to each CD ring. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of ω‐phosphonated poly(ethylene oxide)s through the combination of kabachnik–fields reaction and “click” chemistry

The synthesis of new ω‐phosphonic acid‐terminated poly(ethylene oxide) (PEOs) monomethyl ethers was investigated by the combination of Atherton–Todd or Kabachnik–Fields reactions and the “click” copper‐catalyzed 1,3‐dipolar cycloaddition of azides and terminal alkynes. The Atherton–Todd route fails to give the corresponding phosphonic acid‐terminated PEOs due to competitive cleavage of the P? N bond during the dealkylation step. In contrast, the Kabachnik–Fields route leads with very good yields to ω‐phosphonic acid‐PEO through “click” reaction of azido‐PEO onto dimethyl aminopropargyl phosphonate prepared by Kabachnik–Fields reaction between propargylbenzylimine and dimethyl phosphonate, followed by acidic hydrolysis. The reported methodology, precluding the use of anionic polymerization of ethylene oxide, leads to novel well‐defined phosphonic acid‐terminated PEOs from commercially available products in good yields. Moreover, such a strategy can be adapted to anchor phosphonic acid functionality onto a wide range of polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of a novel graft copolymer with hyperbranched poly(glycerol) as core and “Y”‐shaped polystyrene‐b‐poly(ethylene oxide)2 as side chains

The graft copolymers composed of “Y”‐shaped polystyrene‐b‐poly(ethylene oxide)₂ (PS‐b‐PEO₂) as side chains and hyperbranched poly(glycerol) (HPG) as core were synthesized by a combination of “click” chemistry and atom transfer radical polymerization (ATRP) via “graft from” and “graft onto” strategies. Firstly, macroinitiators HPG‐Br were obtained by esterification of hydroxyl groups on HPG with bromoisobutyryl bromide, and then by “graft from” strategy, graft copolymers HPG‐g‐(PS‐Br) were synthesized by ATRP of St and further HPG‐g‐(PS‐N₃) were prepared by azidation with NaN₃. Then, the precursors (Bz‐PEO)₂‐alkyne with a single alkyne group at the junction point and an inert benzyl group at each end was synthesized by sequentially ring‐opening polymerization (ROP) of EO using 3‐[(1‐ethoxyethyl)‐ethoxyethyl]‐1,2‐propanediol (EEPD) and diphenylmethylpotassium (DPMK) as coinitiator, termination of living polymeric species by benzyl bromide, recovery of protected hydroxyl groups by HCl and modification by propargyl bromide. Finally, the “click” chemistry was conducted between HPG‐g‐(PS‐N₃) and (Bz‐PEO)₂‐alkyne in the presence of N,N,N′,N″,N”‐pentamethyl diethylenetriamine (PMDETA)/CuBr system by “graft onto” strategy, and the graft copolymers were characterized by SEC, ¹H NMR and FTIR in details. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A new strategy for synthesis of “umbrella‐like” poly(ethylene glycol) with monofunctional end group for bioconjugation

A novel strategy was used to synthesize poly(ethylene glycol) (PEG) with “umbrella‐like” structure containing a single reactive group at the “handle” of the “umbrella”. 1‐(Bis(2‐hydroxyethyl)amino)‐3‐(1‐ethoxyethoxy)propan‐2‐ol was used to initiate the ring‐opening polymerization (ROP) of ethylene oxide (EO) in the presence of diphenylmethylpotassium (DPMK) to obtain three‐arm PEG (PEG3), then terminated by benzyl bromide or ethyl bromide. The resultant PEG3 was hydrolyzed to generate hydroxyl group at the conjunction point, and the second step ROP of EO was carried out using PEG3‐OH as macroinitiator in the presence of DPMK. The obtained four‐arm PEG (PEG4) contained a functional hydroxyl group at the end of the fourth arm, which could be easily modified to bioactive groups such as carboxyl, active ester, amino, etc. The well‐defined structure of “umbrella‐like” PEG was characterized by GPC, ¹H NMR, and MALDI‐TOF MS in detail. Propionic acid succinimidyl ester of PEG4 (10 kDa) was utilized for protein conjugation with interferon α‐2b. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of star graft copolymers with asymmetric mixed “V‐shaped” side chains via “click” chemistry on a hyperbranched polyglycerol core

The star graft copolymers composed of hyperbranched polyglycerol (HPG) as core and well defined asymmetric mixed “V‐shaped” identical polystyrene (PS) and poly(tert‐butyl acrylate) as side chains were synthesized via the “click” chemistry. The V‐shaped side chain bearing a “clickable” alkyne group at the conjunction point of two blocks was first prepared through the combination of anionic polymerization of styrene (St) and atom transfer radical polymerization of tert‐butyl acrylate (tBA) monomer, and then “click” chemistry was conducted between the alkyne groups on the side chains and azide groups on HPG core. The obtained star graft copolymers and intermediates were characterized by gel permeation chromatography (GPC), GPC equipped with a multiangle laser‐light scattering detector (GPC‐MALLS), nuclear magnetic resonance spectroscopy and fourier transform infrared. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1308–1316, 2009     

Synthesis of a Novel Oligoaniline: “Dumbbell‐Shaped” Oligoaniline

Summary: A new kind of aniline oligomer with a “dumbbell” shape was synthesized through a simple oxidative coupling reaction with a new rigid aromatic amine as starting material. The oligomer was characterized with mass spectrometry, IR and NMR spectroscopies. Its redox property was checked by cyclic voltammetry and chemical oxidation/reduction process was monitored by UV spectroscopy. We found it has a reversible electrochemical property like common oligoanilines. Combined with its well‐defined structure, it is expected to act as a model compound for a molecular electronic switch.

The “dumbbell‐shaped” oligoaniline compound synthesized here.     

On the “Wolfsberg–Helmholz Conjecture” of “Extended‐Hückel Theory”

After having reviewed some pioneer integral approximations closely related to Rüdenberg's expansions of one‐ and two‐electron orbital products, we apply the previously described “Implicit Multi‐Center Integration” techniques on Roothaan's “restricted” Fock‐matrix components over standard atomic orbital bases. The resulting compact forms are very similar to the well‐known “Wolfsberg–Helmholz Conjecture” of “Extended‐Hückel Theory,” which relates the various off‐diagonal matrix elements of “restricted” Fock‐type to their corresponding diagonal counterparts. In this way, a “nonempirical Extended‐Hückel Theory” can be created. © 2012 Wiley Periodicals, Inc.     

Efficient synthesis of monodisperse,highly crosslinked,and “living” functional polymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization

The facile and efficient one‐pot synthesis of monodisperse, highly crosslinked, and “living” functional copolymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization (ILRPP) is described for the first time. The simple introduction of iniferter‐induced “living” radical polymerization (ILRP) mechanism into precipitation polymerization system, together with the use of ethanol solvent, allows the direct generation of such uniform functional copolymer microspheres. The polymerization parameters (including monomer loading, iniferter concentration, molar ratio of crosslinker to monovinyl comonomer, and polymerization time and scale) showed much influence on the morphologies of the resulting copolymer microspheres, thus permitting the convenient tailoring of the particle sizes by easily tuning the reaction conditions. In particular, monodisperse poly(4‐vinylpyridine‐co‐ethylene glycol dimethacrylate) microspheres were prepared by the ambient temperature ILRPP even at a high monomer loading of 18 vol %. The general applicability of the ambient temperature ILRPP was confirmed by the preparation of uniform copolymer microspheres with incorporated glycidyl methacrylate. Moreover, the “livingness” of the resulting polymer microspheres was verified by their direct grafting of hydrophilic polymer brushes via surface‐initiated ILRP. Furthermore, a “grafting from” particle growth mechanism was proposed for ILRPP, which is considerably different from the “grafting to” particle growth mechanism in the traditional precipitation polymerization. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Drug Design of “Undruggable” Targets

Drug innovation is not only reflected in the discovery of new chemotypes of active compounds against existing targets but also more dependent on the innovation of drug targets. Currently, a number of attractive and validated targets could not be targeted pharmacologically. Some have been described as “undruggable”. In this review, we summarized the current situation of “undruggable” targets, and the design strategies for “undruggable” targets, hoping to provide references for the development of innovative drugs.     

Modulating catalytic activity of polymer‐based cuAAC “click” reactions

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction is used to synthesize complex polymer architectures. In this work, we demonstrate the control of this reaction at 25 °C between polystyrene (PSTY) chains through modulating the catalytic activity by varying the combinations of copper source (i.e., Cu(I)Br or copper wire), ligand (PMDETA and/or triazole ligand), and solvent (toluene or DMF). The fastest rate of CuAAC was found using Cu(I)Br/PMDETA ligand in toluene, reaching near full conversion after 15 min at 25 °C. For the same catalysts system, DMF also gave fast rates of “click” (95% conversion in 25 min). Cu(0) wire in toluene gave a conversion of 98% after 600 min, a much higher rate than that observed for the same catalyst system used in DMF. When the PSTY had a chemically bound triazole ring close to the site of reaction, the rate of CuAAC in toluene increased significantly, 97% in 180 min at 25 °C, in agreement with our previously published results. This suggests that rapid rates can be obtained using copper wire and will have direct applications to the synthesis of compound where air, removal of copper, and reuse of the copper catalyst are required. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012