硫化锌纳米空心球：合成及光学性质研究

Cubic ZnS hollow nanospheres have been prepared by a simple and template-free solvothermal method. The reaction was accomplished between Zn powder and the in-situ prepared S8. The results of X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) show that the ZnS hollow spheres are composed of ultrafine nanoparticles. The average diameters of the hollow nanospheres are about 100 nm. Their photoluminescence (PL) spectra indicate that they have excellent optical properties.     

Chelating ligand-mediated synthesis of hollow ZnS microspheres and its optical properties

Monodispersed hollow ZnS microspheres have been successfully synthesized by a facile ethylenediamine tetraacetic acid (EDTA) mediated hydrothermal route. The sizes of the hollow spheres vary from 1.5 to 3.5 microm when the reaction temperature varied from 130 to 230 degrees C. The formation of these hollow spheres is attributed to the oriented aggregation of ZnS nanocrystals around the gas-liquid interface between H(2)S and water. EDTA plays important role as chelating ligand and capping reagent, which regulates the release of Zn(2+) ions for the formation of ZnS hollow spheres. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectroscopy, photoluminescence, and Raman spectroscopy. The obtained ZnS hollow spheres show a sharp and photostable UV emission approximately 370 nm, which is attributed to the recombination process associated with interstitial sulfur vacancy.     

ZnS∶Co半导体量子点的制备及其光电化学性质

采用低温水热技术,分别以柠檬酸(CA)和巯基丙酸(MPA)为稳定剂,在70℃的水相中合成了单分散的,粒子尺寸约为4 nm的ZnS∶Co半导体量子点.研究了稳定剂、Co2+掺杂剂及其掺杂量对掺杂量子点发光性能和结构的影响.XRD结果表明,Co2+离子主要掺杂在量子点表面,对主体ZnS晶格没有影响.当采用MPA为稳定剂,掺杂量为5%(摩尔分数)时,掺杂量子点的荧光发射强度最高;而同样掺杂量下采用CA为稳定剂时,量子点的荧光发射强度有所下降.循环伏安研究显示,与空白ZnS量子点相比,Co2+离子的掺杂在ZnS的禁带中形成杂质能级,相应地,ZnS∶Co量子点的吸收边发生红移.与未掺杂ZnS量子点相比,掺杂量子点具有较少的表面非辐射复合中心,因而荧光发射强度显著提高.     

Low temperature synthesis of cubic phase zinc sulfide quantum dots

In this study, we report on a new method for the synthesis of ZnS quantum dots (QDs). The synthesis was carried out at low temperature by a chemical reaction between zinc ions and freshly reduced sulfide ions in ethanol as reaction medium. Zinc chloride and elemental sulfur were used as zinc and sulfur sources, respectively and hydrazine hydrate was used as a strong reducing agent to convert elemental sulfur (S₈) into highly reactive sulfide ions (S²⁻) which react spontaneously with zinc ions. This facile, less toxic, inexpensive route has a high yield for the synthesis of high quality metal sulfide QDs. Transmission electron microscopy (TEM) image analysis and selected area electron diffraction (SAED) reveal that ZnS QDs are less than 3 nm in diameter and are of cubic crystalline phase. The UV-Vis absorption spectrum shows an absorption peak at 253 nm corresponding to a band gap of 4.9 eV, which is high when compared to the bulk value of 3.68 eV revealing strong quantum confinement. PL emission transitions are observed at 314 nm and 439 nm and related to point defects in ZnS QDs.     

Synthesis,characterizations, and optical properties of copper selenide quantum dots

We demonstrate the synthesis of copper selenide quantum dots (QDs) by element directed, inexpensive, straight forward wet chemical method which is free from any surfactant or template. Copper selenide QDs have been synthesized by elemental copper and selenium in the presence of ethylene glycol, hydrazine hydrate, and a defined amount of water at 70 °C within 8 h. The product is in strong quantum confinement regime, phase analysis, purity and morphology of the product has been well studied by X-ray diffraction (XRD), UV–Visible spectroscopy (UV–Vis), Photo-luminescent spectroscopy (PL), Fourier transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM), High resolution transmission electron microscopy (HRTEM), and by Atomic force microscopy (AFM) techniques. The absorption and photoluminescence studies display large “blue shift”. TEM and HRTEM analyses revealed that the QDs diameters are in the range 2–5 nm. Due to the quantum confinement effect copper selenide QDs could be potential building blocks to construct functional devices and solar cell. The possible mechanism is also discussed.     

Tuning Optical Properties of Si Quantum Dots by π‐Conjugated Capping Molecules

The absorption and photoluminescence (PL) properties of silicon quantum dots (QDs) are greatly influenced by their size and surface chemistry. Herein, we examined the optical properties of three Si QDs with increasing σ–π conjugation length: octyl‐, (trimethylsilyl)vinyl‐, and 2‐phenylvinyl‐capped Si QDs. The PL photon energy obtained from as‐prepared samples decreased by 0.1–0.3 eV, while the PL excitation (PLE) extended from 360 nm (octyl‐capped Si QDs) to 400 nm (2‐phenylvinyl‐capped Si QDs). A vibrational PL feature was observed in all samples with an energy separation of about 0.192±0.013 eV, which was explained based on electron–phonon coupling. After soft oxidization through drying, all samples showed blue PL with maxima at approximately 410 nm. A similar high‐energy peak was observed with the bare Si QD sample. The changes in the optical properties of Si QDs were mainly explained by the formation of additional states arising from the strong σ–π conjugation and QD oxidation.     

第二近红外窗口荧光Ag2Te量子点的合成

以巯基辛烷为表面配体, 通过调控Ag前体和Te前体的比例, 制备了第二近红外窗口荧光Ag₂Te量子点. 采用透射电子显微镜(TEM)、 X射线衍射光谱(XRD)、 X射线光电子能谱(XPS)、 紫外-可见-近红外吸收光谱和荧光光谱等对产物进行了表征. 结果表明, 制得了粒径均一、 分散性好的油溶性Ag₂Te量子点, 其最大荧光发射波长位于1320 nm, 荧光量子产率高达4.2%.     

Effect of CdS Interlayer on Properties of CdTe Based Quantum Dots

Highly luminescent thioglycolic acid-capped CdTe-based core/shell quantum dots (QDs) were synthesized through encapsulating CdTe QDs in various inorganic shells including CdS, ZnS and CdZnS. CdTe/CdS core/shell QDs exhibited a significant redshift of emission peaks (a maximum emission peak of 652 nm for the core/shell QDs and 575 nm for CdTe cores) with increasing shell thickness. In contrast, the redshift of photoluminescence (PL) peak wavelength of CdTe/ZnS QDs was less than 15 nm. The PL peak wavelengths of the core/shell QDs depended strongly on core size and shell thickness. The PL quantum yields (QYs) of the CdTe/CdS core/shell QDs are up to 67 % while that of CdTe/ZnS core/shell QDs is 45 %. A composite CdZnS shell made CdTe cores a high PL QY up to 51 % and broadly adjusted PL spectra (a maximum PL peak wavelength of 664 nm). The epitaxial growth of the shell was confirmed by X-ray powder diffraction analysis and luminescence decay experiments. Because of high PL QYs, tunable PL spectra, and low toxicity from a ZnS surface layer, CdTe/CdZnS core/shell QDs will be great potential for bioapplications.     

The Application of CdSe Quantum Dots with Multicolor Emission as Fluorescent Probes for Cell Labeling

Herein, highly luminescent CdSe quantum dots (QDs) with emissions from the blue to the red region of visible light were synthesized by using a simple method. The emission range of the CdSe QDs could be tuned from λ=503 to 606 nm by controlling the size of the CdSe QDs. Two amino acids, L ‐tryptophan (L ‐Trp) and L ‐arginine (L ‐Arg), were used as coating agents. The quantum yield (QY) of CdSe QDs (green color) with an optimized thickness could reach up to 52 %. The structures and compositions of QDs were examined by using X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Optical properties were studied by using UV/Vis and photoluminescence (PL) spectroscopy and a comparison was made between uncoated and coated CdSe QDs. The amino acid‐modified β‐cyclodextrin (CD)‐coated CdSe QDs presented lower cytotoxicity to cells for 48 h. Furthermore, amino acid‐modified β‐CD‐coated green CdSe QDs in HepG2 cells were assessed by using confocal laser scanning fluorescence microscopy. The results showed that amino acid‐modified β‐CD‐coated green CdSe QDs could enter tumor cells efficiently and indicated that biomolecule‐coated QDs could be used as a potential fluorescent probe.     

Synthesis, characterization, and optical properties of well-defined N-doped, hollow silica/titania hybrid microspheres

Well-defined nitrogen-doped, hollow SiO2/TiO2 hybrid spheres were successfully prepared through a two-step sol-gel synthesis combined calcination process using triethylamine as the nitrogen source. In this approach, polystyrene (PS)/silica microspheres were first synthesized. Subsequently, the amine-treated PS/SiO2/TiO2 hybrid spheres were obtained by sol-gel method. Finally, the elimination of the PS core, nitrogen-doping process, and crystallization of amorphous TiO2 were simultaneously conducted in the calcination process to acquire the final products. The as-prepared hybrid spheres were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy. The results of XRD, FTIR, and XPS spectra indicated that nitrogen was really doped into the anatase TiO2 shell and confirmed that most nitrogen dopants might be present in the chemical environments of N-Ti-O and Ti-N-O. It was found that the absorption shoulder of nitrogen-doped hollow SiO2/TiO2 hybrid spheres vastly shifted to the visible region up to around 530 nm. The photoluminescence (PL) bands showed spectral lines at about 421, 472, and 529 nm, which were attributed to the self-trapped excitons, F and F+ centers. Moreover, the intensity of the PL spectra band of hollow SiO2/TiO2 hybrid spheres increased with as the amount of titanium tetrabutoxide (TBOT) precursor increased. However, the doping of nitrogen into hollow SiO2/TiO2 hybrid spheres led to the drastic quenching of photoluminescence because of the increase in the separation efficiency of the photoinduced electron and hole pairs.     

水热法制备多层核壳结构Gd_2O_3:Eu~(3+)空心微球

以稀土硝酸盐-葡萄糖的混合溶液作为前驱体,采用一步水热法和随后的热处理得到了多层核壳结构Gd_2O_3:Eu~(3+)空心微球,并用X-射线衍射(XRD)、场发射扫描电镜(FESEM)、透射电镜(TEM)、X-射线能量色散光谱(EDS)和荧光光谱等测试手段对所得样品进行了表征.结果表明:所得空心球样品为纯的立方相的Gd_2O_3.具有规则的多层核壳空心结构,空心球的直径在2～3μm左右,壁厚约为100 nml,并且Gd_2O_3:Eu~(3+)空心球是由尺寸约为30 nm的球形纳米颗粒白组装而成.样品中含有Gd、Eu、O元素.该空心球样品具有强的Eu~(3+)的特征红光发射以及长的荧光寿命,可以用来作为时间分辨荧光标记物.     

高质量CdSe量子点的水相制备与表征

以巯基丁二酸为稳定剂, 亚硒酸钠为硒源, 制备了高质量水溶性CdSe量子点. 研究了反应时间、 镉与硒的摩尔比及镉与巯基丁二酸的摩尔比等实验条件对CdSe量子点光谱性能的影响. 分别用紫外-可见光谱、 荧光光谱、 X射线粉末衍射和透射电子显微镜等对量子点进行表征. 结果表明, 采用这种方法制得的CdSe量子点为立方晶型, 量子点的荧光发射峰在518～562 nm范围内连续可调, 并且发射峰的半峰宽始终保持在35 nm左右, 荧光量子产率可达21%.     

Facile synthesis and step by step enhancement of blue photoluminescence from Ag-doped ZnS quantum dots

Our results pertaining to the step by step enhancement of photoluminescence (PL) intensity from ZnS:Ag,Al quantum dots (QDs) are presented. Initially, these QDs were synthesized using a simple co-precipitation technique involving a surfactant, polyvinylpyrrolidone (PVP), in de-ionised water. It was observed that the blue PL originated from ZnS:Ag,Al QDs was considerably weak and not suitable for any practical display application. Upon UV (365 nm) photolysis, the PL intensity augmented to ~170% and attained a saturation value after ~100 min of exposure. This is attributed to the photo-corrosion mechanism exerted by high-flux UV light on ZnS:Ag,Al QDs. Auxiliary enhancement of PL intensity to 250% has been evidenced by subjecting the QDs to high temperatures (200 °C) and pressures (~120 bars) in a sulphur-rich atmosphere, which is due to the improvement in crystallanity of ZnS QDs. The origin of the bright-blue PL has been discussed. The results were supported by X-ray phase analysis, high-resolution electron microscopy and compositional evaluation.     

颜色可调的高荧光CdTe量子点的水相合成

以亚碲酸钠为碲源,硼氢化钠为还原剂,一步合成了巯基丁二酸(MSA)稳定的CdTe量子点.研究了反应液pH值、镉与碲的摩尔比及镉与巯基丁二酸的摩尔比等实验条件对CdTe量子点体系荧光量子产率的影响,并用荧光光谱、X射线粉末衍射及透射电子显微镜等对其进行了表征.结果表明,CdTe量子点具有闪锌矿结构,形貌呈球状;在pH=1...     

一锅合成绿色到近红外发射的CdTe量子点

以3-巯基丙酸(MPA)为稳定剂,采用水相合成法制备了从绿色到近红外发射的CdTe量子点。系统研究了反应液pH值、镉和碲的物质的量之比及镉和3-巯基丙酸的物质的量之比等实验条件对CdTe量子点体系的发射波长和荧光量子产率的影响。在pH值为10.5,且nCd2+∶nTe2-∶nMPA=1∶0.05∶1.1的条件下,回流0.5 h,CdTe量子点体系在569 nm波长处的荧光量子产率达到30.8%;在7 h的回流时间内,制备的量子点的波长覆盖范围为525～730 nm。分别用X射线粉末衍射、透射电镜和红外光谱对CdTe量子点的晶体结构、形貌及表面基团进行表征。     

油溶性CuInS2/ZnS量子点的制备及其温敏性聚丙烯酰胺胶束介导的水相转移

采用非热注法成功制备了高质量的油溶性CuInS2/ZnS核壳量子点,量子点的荧光发射峰在可见光到近红外范围内可调(550～800 nm),且荧光量子产率最高达80%。本文进一步利用具有温敏特性的聚丙烯酰胺胶束作相转移剂,成功地将油溶性的CuInS2/ZnS核壳量子点转移入水相。水相中自组装形成的CuInS2/ZnS量子点-胶束复合物不仅具有良好的荧光性质,而且胶束原有的灵敏的热响应性被保留。这些研究初步表明,无镉的低毒的CuInS2/ZnS量子点可作为纳米胶束的荧光示踪探针。     

油溶性CuInS2/ZnS量子点的制备及其温敏性聚丙烯酰胺胶束介导的水相转移

采用非热注法成功制备了高质量的油溶性CuInS₂/ZnS核壳量子点, 量子点的荧光发射峰在可见光到近红外范围内可调(550~800 nm), 且荧光量子产率最高达80%。本文进一步利用具有温敏特性的聚丙烯酰胺胶束作相转移剂, 成功地将油溶性的CuInS₂/ZnS核壳量子点转移入水相。水相中自组装形成的CuInS₂/ZnS量子点-胶束复合物不仅具有良好的荧光性质, 而且胶束原有的灵敏的热响应性被保留。这些研究初步表明, 无镉的低毒的CuInS₂/ZnS量子点可作为纳米胶束的荧光示踪探针。     

Y_2O_2S:Eu~(3+)空心微球的制备与性能

以单分散的碳球为硬模板,采用均匀共沉淀法合成了Y_2O_2S:Eu~(3+)心微球.通过XRD、SEM、TEM、荧光光谱对其进行表征.X射线衍射测试表明所制备的Y_2O_2S:Eu~(3+)空心微球为单相,六方晶.扫描电子显微镜(SEM)和透射电子显微镜(TEM)测试表明所制备的Y_2O_2S:Eu~(3+)空心微球粒径小,分布均匀.激发和发射光谱测试表明Eu~(3+)离子能有效地掺入硫氧化钇基质中,并具有良好的发光性能.     

以氨基酸为晶体生长控制剂合成多级纳米结构的硫化铟空心微球

以水热方法制备具有多级纳米结构的In2S3空心微球. 通过对不同反应时间产物的跟踪表征, 证明微球中空结构的形成归因于Ostwald ripening机理. 空心微球的壳层由In2S3的纳米粒子或纳米片组成, In2S3空心球的紫外可见光谱蓝移以及荧光光谱在约385 nm的强发射和364 nm的弱发射, 均显示了纳米尺度In2S3晶体的量子局限效应. 以不同的氨基酸作为晶体生长修饰剂, 可以选择性地制备不同表面形貌的In2S3空心微球, 显示了氨基酸的不同功能团在In2S3晶体生长过程中对表面形貌的控制作用.     

PAMAM树形分子为模板低温制备纳米硫化锌空心球

Hollow ZnS spheres have been prepared in the presence of generation 3.5 poly (amidoamine) dendrimers with surface ester groups (G3.5-COOCH3 PAMAM dendrimer) as synthetic matrix template. The products obtained were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-Vis absorption. TEM studies show that the hollow spheres with diameters ranging from 80 to 100 nm are prepared. The range of wall thickness was estimated to be about 20～30 nm. It was found that the concentration of PAMAM dendrimer had a significant influence on the formation of hollow ZnS spheres. The possible formation mechanism of the hollow spherical structure is also discussed.