Supercritical fluid extraction of vapor-deposited pyrene from carbonaceous coal stack ash

The efficiencies of extraction of vapor-deposited pyrene from a high-carbon coal stack ash by Soxhlet extraction with methanol, ultrasonic extraction with toluene, acid pretreatment and subsequent ultrasonic extraction with toluene, batch extraction with toluene, and supercritical fluid extraction (SFE) are compared. SFE using CO(2) or isobutane yielded extraction recoveries virtually identical with those obtained using ultrasonic or Soxhlet extraction processes. Collection of the SFE extract was performed by expansion into a solvent or onto the head of a gas chromatography (GC) column. No loss of extracted pyrene was observed upon collection of methanol-modified CO(2) SFE by expansion into methanol. Also, no loss of pure CO(2) SFE extract was observed upon collection on the head of a GC column. However, use of a methanol or toluene modifier for CO(2) SFE directly coupled to GC effected complete loss of extracted pyrene.     

Phase diagram studies of methanol–CHF3 and methanol–H2O–CHF3 mixtures

Comprehensive phase diagrams of methanol/CHF₃ and methanol/H₂O/CHF₃ mixtures over the temperature range of 25–100°C and pressure range of atmospheric to 340 atm are reported. Fluoroform is expected to be useful as an alternative to CO₂ for enhancing the fluidity of liquid mixtures due to its high polarity and low viscosity. Therefore, these mixtures will be studied as mobile phases for enhanced-fluidity liquid chromatography and extraction. The phase behavior of methanol/CHF₃ and methanol/H₂O/CHF₃ was compared to that of methanol/CO₂ and methanol/H₂O/CHF₃. Fluoroform is markedly more miscible with methanol or methanol/H₂O than is CO₂. Data for methanol/CHF₃ binary mixtures were also modeled by the Peng–Robinson equation of state. The correlation results showed that the PR equation of state with two temperature-independent binary parameters was capable of representing the experimental data over the entire temperature range with an average relative deviation within 6%.     

Some applications of supercritical fluid extraction

Supercritical fluid extraction (SFE) exploits the solvation power of fluids at temperatures and pressures close to their critical point. Use of SFE with supercritical CO₂ is reported for the extraction of caffeine and quinine from various plant materials and of morphine from serum. Results are compared with those obtained by extractions with subcritical methanol and tetrahydrofuran, normal organic Soxhlet extractions and solid-phase extraction.     

Supercritical fluid extraction of sinomenine from Sinomenium acutum (Thumb) Rehd et Wils

Supercritical carbon dioxide, with and without a methanol modifier, was used to extract sinomenine from Sinomenium acutum (Thumb) Rehd et Wils. Sinomenine determinations were carried out using high-performance liquid chromatography (HPLC). The results show that the yield obtained after 2.5 h extraction with methanol-modified supercritical carbon dioxide was the highest (7.47 mg/g), while that obtained with only supercritical carbon dioxide was the lowest (0.17 mg/g). The recovery obtained with supercritical carbon dioxide, with and without a methanol modifier, could not be increased greatly by the method of the alkalinization of sample. Higher recoveries were obtained than extraction using methanol in Soxhlet extractor.     

Efficiency of Different Methods and Solvents for the Extraction of Polycyclic Aromatic Hydrocarbons from Soils

The efficiencies of supercritical fluid extraction (SFE), accelerated solvent extraction (ASE), Soxhlet, and ultrasonic extraction in the analysis of polycyclic aromatic hydrocarbons (PAHs) in soils were evaluated. Solvents with different polarity were used to extract the PAHs from two soils, one with high and one with low contamination level. ASE showed good results with all solvents almost independent of the solvent polarity and the best results with acetone-toluene (1 : 1). Ultrasonic extraction with acetone-toluene for the uncontaminated soil and acetone-ethanolamine for the highly contaminated also showed good recoveries. The time-consuming Soxhlet extraction with pentane or dichloromethane was less effective. The PAH recovery from SFE was related to the soil matrix or the contamination level. The best extraction conditions (CO 2 /10% pentane) are successful for the soil with a low contamination level and a high humic acid content whereas the extractions of the highly contaminated soil gave poor results irrespective of the solvent used.     

Supercritical fluid extraction of polycyclic aromatic hydrocarbons (PAH) from native soil and fly ash with pure and modified carbon dioxide and dimethylether

Polycyclic aromatic hydrocarbons (PAH) and alkyl-PAH in the lower mg/kg range were extracted from soil and fly ash. Extraction yields were measured for toluene Soxhlet, supercritical carbon dioxide, toluene modified carbon dioxide, and toluene modified dimethylether (DME) extractions. Pure DME similarly to toluene Soxhlet extraction enhances extraction yields (32 mg/kg) as compared to pure carbon dioxide (21 mg/kg). In particular, higher molecular weight PAH are extracted with pure DME. 5% Toluene modified carbon dioxide (43 mg/kg) and toluene modified DME (50 mg/kg) yield much better extraction yields than Soxhlet (32 mg/kg) or pure supercritical fluid extractions. Received: 19 July 1996 / Revised: 23 September 1996 / Accepted: 22 October 1996     

High temperatures and high pressures Brillouin scattering studies of liquid H(2)O+CO(2) mixtures

The Brillouin scattering spectroscopy studies have been conducted in a diamond anvil cell for a liquid mixtures composed of 95 mol?% H(2)O and 5 mol?% CO(2) under high temperatures and pressures. The sound velocity, refractive index, density, and adiabatic bulk modulus of the H(2)O+CO(2) mixtures were determined under pressures up to the freezing point at 293, 453, and 575 K. It is found from the experiment that sound velocities of the liquid mixture are substantially lower than those of pure water at 575 K, but not at lower temperatures. We presented an empirical relation of the density in terms of pressure and temperature. Our results show that liquid H(2)O+CO(2) mixtures are more compressible than water obtained from an existing equation of state of at 453 and 575 K.     

CO(2) as a separation switch for ionic liquid/organic mixtures

A novel technique to separate ionic liquids from organic compounds is introduced which uses carbon dioxide to induce the formation of an ionic liquid-rich phase and an organic-rich liquid phase in mixtures of methanol and 3-butyl-1-methyl-imidazolium hexafluorophosphate ([C4mim][PF6]). If the temperature is above the critical temperature of CO2 then the methanol-rich phase can become completely miscible with the CO2-rich phase, and this new phase is completely ionic liquid-free. Since CO2 is nonpolar, it is not equipped to solvate ions. As the CO2 dissolves in the methanol/[C4mim][PF6] mixture, the solvent power of the CO2-expanded liquid is significantly reduced, inducing the formation of the second liquid phase that is rich in ionic liquid. This presents a new way to recover products from ionic liquid mixtures and purify organic phases that have been contaminated with ionic liquid. Moreover, these results have important implications for reactions done in CO2/ionic liquid biphasic mixtures.     

Excited-state proton transfer in gas-expanded liquids: the roles of pressure and composition in supercritical CO2/methanol mixtures

Excited-state proton transfer from 5,8-dicyano-2-naphthol to methanol takes place in CO2/methanol mixtures, in the pressure and temperature ranges of supercritical CO2. The efficiency of the proton-transfer step decreases with the pressure. This is assigned to the perturbation of the methanol clusters solvating the naphthol.     

In situ ATR-IR spectroscopic and reaction kinetics studies of water-gas shift and methanol reforming on Pt/Al2O3 catalysts in vapor and liquid phases

Reaction kinetics measurements of the water-gas shift reaction were carried out at 373 K on Pt/Al2O3 in vapor phase to investigate the effects of CO, H2, and H2O partial pressures. Results of in situ ATR-IR studies conducted in vapor phase under similar conditions suggest that the Pt surface coverage by adsorbed CO is high (approximately 90% of the saturation coverage), leading to a negligible effect of the CO pressures on the rate of reaction. The negative reaction order with respect to the H2 pressure is caused by the increased coverage of adsorbed H atoms, and the fractional positive order with respect to the water pressure is consistent with non-equilibrated H2O dissociation on Pt. Results of in situ ATR-IR studies carried out at 373 K show that the presence of liquid water leads to a slight decrease in the Pt surface coverage by adsorbed CO (approximately 80% of the saturation coverage) when the CO partial pressure is the same as in the vapor-phase studies. The rate of the WGS reaction in the presence of liquid water is comparable to the rate under complete vaporization conditions when other factors (such as CO partial pressure) are held constant. Reaction kinetics measurements of methanol reforming were carried out at 423 K over a total pressure range of 1.36-5.84 bar. In situ ATR-IR studies were conducted at 423 K to determine the Pt surface coverage by adsorbed CO in completely vaporized methanol feeds and in aqueous methanol solutions. The decomposition of methanol is found to be slower during the reforming of methanol in liquid phase than in vapor phase, which leads to a lower rate of hydrogen production in liquid phase (0.08 min(-1) at 4.88 bar) than in vapor phase (0.23 min(-1) at 4.46 bar). The lower reaction order with respect to methanol concentration observed for vapor-phase versus liquid-phase methanol reforming (0.2 versus 0.8, respectively) is due to the higher extent of CO poisoning on Pt for reforming in vapor phase than in liquid phase, based on the higher coverage by adsorbed CO observed in completely vaporized methanol feeds (55-60% of the saturation coverage) than in aqueous methanol feed solutions (29-40% of the saturation coverage).     

Extraction of various additives from polystyrene and their subsequent analysis

Summary The extraction of fifteen polymer additives which are used as antioxidants, uv stabilizers, process lubes, flame retardants, and antistats from eight formulations of polystyrene is demonstrated with supercritical carbon dioxide and compared to traditional dissolution/precipitation extractions. The purpose of the study was two fold: 1) the development of a high performance liquid chromatography method(s) for the additives and 2) the determination of the viability of supercritical fluids for extraction of the additives from polystyrene. Nine of the additives were assayed via reversed phase liquid chromatography while, the remaining six additives could not be assayed in this manner. In order to develop an extraction method for the additives, the effects of static extraction time, CO₂ density, and temperature were first investigated. These preliminary extractions revealed that a static period which afforded an opportunity for the polymer to swell combined with a high CO₂ density and temperature above the polymer glass transition yielded quantitative recoveries of the additives. Triplicate extractions of the various polystyrene formulations matched additive recoveries obtained by the traditional dissolution/precipitation method but the former method was faster and used less organic solvent.     

Supercritical fluid extraction of atrazine and its metabolites from soil

Soxhlet (methanol) and SFE extraction with carbon dioxide in the presence of modifiers at different temperatures (100–200°C) for the extraction of atrazine and its main metabolites from a soil sample were compared. The most effective extraction conditions for both atrazine and its metabolites (i.e. deethylatrazine and deisopropylatrazine) were Co₂ modified with 20% molar methanol-trifluoroacetic acid (MeOH-TFA) (TFA 0.65M in MeOH) at 100°C, leading to an extraction efficiency comparable with that of Soxhlet extraction with MeOH for atrazine and ca. 20% higher for its main metabolites. The relative standard deviation (RSD) of SFE was lower than that obtained by Soxhlet extraction, probably because of less interference in the cGC-NPD determination. All the other modifiers evaluated (acetone, triethylamine, and methanol) were less effective than MeOH-TFA for the extraction of atrazine and its metabolites from a soil sample, even at high molar concentrations (20%) and use of higher extraction temperatures (200°C). These results indicate the importance of matrix effects and the need of the selection of an appropriate modifier in order to obtain quantitative extractions by SFE.     

普钙-脲-水复合肥料体系的等温溶度研究

从发展复合肥料出发,研究了ＣａＳＯ－Ｃａ（Ｈ２ＰＯ４）２Ｈ２Ｏ体系及其三元边界体系Ｃａ（Ｈ２ＰＯ４）２－ＣＯ（ＮＨ２）２－Ｈ２Ｏｄ ２５℃时的等温溶度,三元体系中形成一个新化合物Ｃａ（Ｈ２ＰＯ４）２。ＣＯ（ＮＨ２）２。四元体系溶 度图可以指导商品普钙磷肥转化为含各合复肥。     

Extraction of a quality assurance sediment sample for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F)

An experimental design for two variables at three and four levels was used to investigate the Soxhlet extraction of polychlorinated dibenzo-p-dioxins/ dibenzofurans (PCDD/F) from a quality assurance sediment. The first variable was the solvent: toluene/methanol, toluene (both Soxhlet) and toluene in Soxhlet-Dean-Stark equipment. The second variable were four different bulks: silica, sulfuric acid treated silica, sodium carbonate and no bulk. Extractions with toluene/methanol and sulfuric acid provided only a small contribution to the overall extraction efficiency. Toluene/methanol preferably improved the extraction of PCDD, and the sulfuric acid improved the PCDF extraction. This was likely to reflect improved extraction efficiency of substructures in the sediment as pulp effluent remains (fiber) and fly-ash particulate. A previously found PCDD formation in extractions using toluene/methanol in presence of sodium carbonate was reproduced. A designed supercritical fluid extraction (SFE) experiment was also accomplished, however even under the best used conditions some PCDD/F were retained on the particulate compared to Soxhlet extraction. Variations in extraction efficiency in Soxhlet and SFE indicated that different subfractions of PCDD/F are connected to the matrix with different mechanisms, thus indicating that different PCDD/F fractions had different abilities to equilibrate also in the real environment.     

High-performance liquid chromatography of fat-soluble vitamins. Simultaneous quantitative analysis of vitamins D2, D3 and E. Study of percentage recoveries of vitamins from cod liver oil

Vitamins D2, D3 and E were resolved and quantified by applying reversed-phase high-performance liquid chromatography to extracts of cod liver oil. The method, using two reversed-phase C18 columns and a ternary mixture of acetonitrile, methanol and water as the eluent resolved all fat-soluble vitamins well, including the pair D2-D3. The extraction procedure was studied; the recoveries, using two different solvents (hexane and diethyl ether) for extractions were 60.6 +/- 1.0 and 77.1 +/- 1.1, 56.9 +/- 1.2 and 74.8 +/- 0.8, and 14.1 +/- 0.7 and 89.8 +/- 1.4% for vitamins D2, D3 and E, respectively.     

Supercritical fluid extraction of phenol compounds from olive leaves

A clean, highly selective supercritical fluid extraction (SFE) method for the isolation of phenols from olive leaf samples was examined. Total phenol extracts were determined using the Folin-Ciocalteu reagent. Dried, ground, sieved olive leaf samples (30 mg) are subjected to SFE, using carbon dioxide modified with 10% methanol at 334 bar, 100 degrees C (CO(2) density 0.70 g ml(-1)) at a liquid flow-rate of 2 ml min(-1) for 140 min. Diatomaceous earth is used to reduce the void volume of the extraction vessel. The influence of extraction variables such as modifier content, pressure, temperature, flow-rate, extraction time, and collection/elution variables, were studied. Supercritical fluid extracts were screened for acid compounds such as carboxylic acids and phenols using Electrospray-MS (in the negative ionization mode). SFE was found to produce higher phenol recoveries than sonication in liquid solvents such as n-hexane, diethyl ether and ethyl acetate. However, the extraction yield obtained was only 45%, using liquid methanol.     

Evaluation of the novel Soxflo technique for rapid extraction of crude fat in foods and animal feeds

The new Soxflo instrument was evaluated for the determination of crude fat in foods and animal feeds. Samples are packed into small columns and extracted with petroleum ether at room temperature. The Soxflo yielded accurate data from foods, ranging from 0.4 to 73.2% crude fat, compared with Soxhlet extractions and Certified Reference Materials, for which recoveries averaged 99.7 and 100.7%, respectively. Relative standard deviations (1.81%) were approximately half those of Soxhlet extractions (3.68%). Regression analysis of the data suggested that there was no proportional bias. A small but acceptable constant bias was measured. Soxflo extractions are easy to perform and take approximately 1 h to complete. The main difference between the Soxflo and Soxhlet techniques lies in the extraction procedure. Estimated savings during extractions are in time (85% reduction), energy (95%), cooling water (100%), and solvents (50%). Soxflo extractions are, therefore, more environmentally friendly than Soxhlet extractions.     

Comparison of extraction procedures for the determination of arsenic and other elements in lobster tissue by inductively coupled plasma mass spectrometry

A variety of extraction procedures were evaluated for the extraction of arsenic and other analytes from lobster tissue samples using inductively coupled plasma mass spectrometry (ICP-MS) detection. Soxhlet, room temperature mixing, sonication, microwave assisted, supercritical carbon dioxide and subcritical water extractions were evaluated for a variety of solvent systems and optimum conditions determined using a partially defatted Lobster Hepatopancreas marine certified reference material, TORT-2 (National Research Council of Canada). The solubility trends and solvents into which the analytes extracted gave an indication as to the polar/non-polar nature of the compounds present. Analytes that prefer water are probably more polar or inorganic, while those preferring methanol solutions are less polar or organic in nature. Arsenic, cadmium, cobalt, molybdenum and selenium were probably all present in TORT-2 in both polar inorganic and non-polar organic forms. While TORT-2 may have contained similar amounts of selenium in both forms, the results suggested that more of the arsenic was present as less polar or more organic compounds, and cobalt existed mainly as more polar or inorganic species. Most of the extraction techniques suggested that, although there may be some less polar organic forms present, more of the cadmium was probably present as polar inorganic compounds. Additionally, most techniques indicated that molybdenum was possibly all less polar or more organic in nature. In general, microwave assisted extraction (MAE) yielded comparable or improved recoveries for all of the analytes monitored and usually required less solvent. Additionally, MAE proved to be the mildest, fastest, least complicated and most reproducible extraction technique evaluated. MAE at 75 degrees C for 2 min exposure time yielded quantitative recovery of arsenic from TORT-2. These conditions were evaluated for lobster tissue samples purchased from a local restaurant. Separate evaluation of the lobster meat and organs resulted in quantitative recoveries of arsenic from both tissue samples. The results indicated that the extraction efficiencies might have some dependence upon the extraction technique, extraction conditions, analyte, solvent, and sample matrix.     

Liquid CO2 extraction of Jasminum grandiflorum and comparison with conventional processes

The concrete (0.35%) of Jasminum grandiflorum L. flowers was prepared by extraction in n-pentane, and the absolute (0.27%) by fractionation of the n-pentane extract (concrete) with cold methanol. Direct extraction of flowers with liquid CO2 gave a relatively fat-free product in 0.26% yield. The liquid CO2 extract was enriched with terpenoids and benzenoids, thus providing the organoleptically accepted product. The major compounds, such as benzyl acetate, (E,E)-alpha-farnesene and (Z)-3-hexenyl benzoate, along with compounds like indole, methyl anthranilate, (Z)-jasmone, (Z)-methyl jasmonoate and (Z)-methyl epi-jasmonoate, are responsible for the high diffusivity of the jasmine fragrance. These compounds have been obtained with improved recoveries in the liquid CO2 extract. On the other hand, the yield of the essential oil was poor (0.05%), and some polar compounds (oxygenated terpenoids) were recovered in less amounts in comparison with either the n-pentane or liquid CO2 extract.     

Differentiation between isomeric oxidative metabolites of a piperidine-containing drug by liquid chromatography-tandem mass spectrometry with stable-isotope tracer technique

This report describes the application of a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method to differentiation of hydroxylations and N-oxidations and of two different aliphatic hydroxylations in the investigation of the metabolism of pibutidine hydrochloride, a novel H2 antagonist, the structure of which includes a piperidine ring. Pibutidine metabolites in urine samples from adult male volunteers after oral administration of pibutidine hydrochloride were separated by reversed-phase LC and ionized using an electrospray ionization (ESI) interface. A hydroxylated form of pibutidine was distinguished from the N-oxide by comparison of their product ion spectra, although their mass-to-charge ratios of protonated molecules were identical. Further, two hydroxylated compounds were present in rat microsomal incubation mixtures with pibutidine. The distinction between their positions of hydroxylation (beta- and gamma-carbon hydroxylation) on the piperidine ring was studied using [piperidine-2H10] pibutidine as incubation substrate. The production of the beta-hydroxylated form was accompanied by the elimination of three 2H, resulting from a mechanism including the formation of iminium/enamine. The participation of the iminium ion intermediate in the beta-hydroxylation was confirmed by the observation that a cyanide adduct of pibutidine was formed instead of the beta-hydroxylated form when another incubation was performed in the presence of cyanide.