液相质谱测定非极性或弱极性物质的研究进展

从衍生、离子加合、离子源、裂解等方面对近年来液相质谱测定非极性或弱极性物质的研究进行综述。其中,衍生方式主要介绍了醛酮类化合物、醇类化合物、胺类化合物、烯烃与炔烃等物质的衍生方式,离子加合主要介绍了铵根离子加合等正离子加合模式与甲酸根等负离子加合模式,离子源主要介绍了大气压化学电离(APCI)、APPI、DESI三种离子源在测定非极性或弱极性物质的研究,裂解方式以三氯杀螨醇为例子。文章以实例对液相质谱测定非极性或弱极性物质的策略进行了讨论,对它们的现状和未来前景进行预测。     

双电离源(辉光放电/激光溅射电离)四极杆质谱仪的研制

本研究将辉光电离源与激光溅射电离源巧妙地结合在同一台仪器中,使固体样品在离子源腔体中既能辉光电离,也能激光电离;并且使用同一质量分析器,两种离子源的结果可以相互比对,进而得到更为准确的分析结果.此仪器主要由真空系统、离子源、离子传输系统、四极杆质量分析器及检测与数据采集系统等组成.实验中分别用两种离子源测试了标准样品SRM 1262b,并获得了半定量结果.结果表明,仪器具有定性能力强,分析速度快,检测灵敏度高等优点,对固体样品元素分析的检出限可达μg/g量级.实验表明,激光溅射电离质谱的性能优于辉光放电质谱.     

大气压光电离技术及其应用研究进展

大气压光电离离子源(APPI)是一种新兴的用于液质联用的软电离离子源,它是利用光化学作用将气相中样品电离的离子化技术,该技术促进了质谱技术对弱极性化合物的分析检测。介绍了液相色谱–质谱/质谱联用技术中大气压光电离的基本原理、应用优点,综述了其在定性、定量分析检测中的应用。     

一种新型二次离子质谱的一次离子源及其离子光学系统

本研究设计了一种新型用于二次离子质谱的一次离子源及其离子光学系统.通过此一次离子源,大气压下产生的一次离子可以被加速、聚焦并传输到位于真空条件下的样品表面并电离样品得到可供质谱仪分析的二次离子.通过理论模拟结合实验系统研究了此一次离子源的主要组成部分——离子光学系统的原理、结构和性能.以电喷雾电离源为例,成功地将大气压...     

微波等离子体常压解吸电离质谱法快速检测化学药剂中的活性成分

构建了一种新型电离源--微波等离子体常压解吸电离源, 等离子体由微波等离子体炬产生, 工作气体为Ar气, 微波频率为2450 MHz, 该离子源可在大气压下产生稳定的等离子体. 将该电离源与具有大气压接口的Corsair API-TOF型飞行时间质谱仪结合, 实现了化学药剂中单一或多种主要活性成分的快速分析, 在手动进样条件下, 检测速度可达每小时360次. 在微波等离子体环境下, 活性物质成盐时母体化合物上结合的酸性物质可被直接除掉, 谱图中主要离子为母体化合物的准分子离子[M+H]⁺, 便于识别. 微波等离子体常压解吸电离质谱法无需化学试剂, 具有实时、 快速及无污染等特点, 为药剂研发及化学工业提供了一种新的检测技术.     

在线气体分析的电晕放电大气压电离质谱

研制了适合在线气体分析的电晕放电大气压电离源(corona discharge atmospheric pressure ionization source)及其与商品质谱仪(LTQ-MS)的接口,对其试剂离子的产生机理进行了研究,以H2O. (H2O)为试剂离子,对乙醇气体进行检测,并分析了该离子的产生机制。实验结果表明:在潮湿氮气中电晕放电产生的主要试剂离子是m/z36、37和55;而在含丙酮的潮湿氮气中则产生m/z59和76等离子。利用静态顶空-电晕放电大气压电离质谱对不同浓度的乙醇水溶液进行分析,结果表明:以m/z64为检测对象,乙醇气体浓度的最低检出限可达2.4×10-7g/L;而以m/z47为检测对象,检出限为5.9×10-6g/L。同时还利用动态顶空-电晕放电大气压电离质谱对栀子花香气成分进行了检测,为生物挥发性物质的在线检测提供了一种新方法。     

辉光放电质谱分析中质谱干扰及其校正方法的现状

详细地介绍了辉光放电质谱分析中的质谱干扰如同量异位素、多原子离子和多电荷离子干扰。从同位素选择、高分辨率仪器、碰撞诱导解离、离子源冷却、数学方法校正、放电气体更换和放电气体纯度提高等方面对辉光放电质谱的质谱干扰校正方法的现状进行了评述(引用文献共68篇)。     

新型空气动力辅助离子源与不同类型质量分析器的快速接口技术

报道了新型空气动力辅助离子化(AFAI)装置与不同类型商业化质量分析器的快速接口技术. 在前期研究基础上, 进一步提高了AFAI系统的抽气流速, 在更宽范围内考察了流速对质谱灵敏度的影响; 对AFAI离子源进行模块化设计和制作, 重点解决快速接口问题, 通过更换接口板可实现其与不同厂家、 不同类型质量分析器的兼容及联用, 尤其可以与具有气帘接口的质量分析器联用. 本离子源装置结合不同质量分析器可以进行全扫描、 子离子扫描、 母离子扫描、 中性丢失扫描和高分辨等多种类型质谱分析, 而且AFAI可在电喷雾(ESI)、 解析电喷雾(DESI)和大气压化学电离(APCI)等多种离子化模式下工作, 从而实现对不同性质化合物的快速检测. 本研究结果进一步提高了AFAI离子化技术的功能, 拓展了其应用范围.     

电喷雾/光电离双源型小型离子阱质谱仪的研制

构建了一套电喷雾/紫外灯双电离源离子阱质谱仪系统,用于气体和液体样品的快速检测.仪器采用非连续大气压进样技术,通过夹管阀装置来同时完成电喷雾离子和中性气态样品的采集和传输.所配备的两种电离源适合不同的分析对象,在应用上具有一定的互补性,其中电喷雾源用于溶液中极性化合物的电离,而紫外电离源主要用于分析气态有机物.本研究选择了苯甲醚、甲苯、2,4-二甲基苯胺、精氨酸、利血平和阿斯巴甜等不同类型的样品,测试了仪器在使用不同电离模式下的工作性能.结果表明,电喷雾源和紫外光电离源可用于不同类型样品的电离,在分析2,4-二甲基苯胺时还能分别生成不同类型的分子离子.两种电离源在工作时互不干扰,既能单独使用,也能同时开启,可根据检测需求随意切换工作模式,获得更全面的样品成分信息.双离子源设计是扩展小型质谱仪应用范围的一种有效途径,这种方案不会明显增加仪器的体积,却能提供更多样化的分析功能,满足对不同类型样品的检测需求.     

磁质谱在核科学领域的研究进展

对磁质谱在核科学领域的研究进展进行了综述。介绍了磁质谱的基本原理，详细论述了扇形磁场电感耦合等离子体质谱、加速器质谱、二次离子质谱、热电离质谱、激光共振电离质谱、辉光放电质谱的电离机理、特征及应用领域。扇形磁场电感耦合等离子体质谱分辨率高，检测限低，在元素和同位素分析中应用最为广泛。加速器质谱通常用于样品中超痕量、长寿命放射性核素的量化分析。TI-MS被认为是元素同位素比值分析最精确的仪器之一，而辉光放电质谱主要运用于高纯材料中杂质的分析。     

Ionization of Volatile Organics and Nonvolatile Biomolecules Directly from a Titanium Slab for Mass Spectrometric Analysis

Atmospheric pressure chemical ionization (APCI)-mass spectrometry (MS) and electrospray ionization (ESI)-MS can cover the analysis of analytes from low to high polarities. Thus, an ion source that possesses these two ionization functions is useful. Atmospheric surface-assisted ionization (ASAI), which can be used to ionize polar and nonpolar analytes in vapor, liquid, and solid forms, was demonstrated in this study. The ionization of analytes through APCI or ESI was induced from the surface of a metal substrate such as a titanium slab. ASAI is a contactless approach operated at atmospheric pressure. No electric contacts nor any voltages were required to be applied on the metal substrate during ionization. When placing samples with high vapor pressure in condensed phase underneath a titanium slab close to the inlet of the mass spectrometer, analytes can be readily ionized and detected by the mass spectrometer. Furthermore, a sample droplet (~2 μL) containing high-polarity analytes, including polar organics and biomolecules, was ionized using the titanium slab. One titanium slab is sufficient to induce the ionization of analytes occurring in front of a mass spectrometer applied with a high voltage. Moreover, this ionization method can be used to detect high volatile or polar analytes through APCI-like or ESI-like processes, respectively.     

Anisole, a new dopant for atmospheric pressure photoionization mass spectrometry of low proton affinity, low ionization energy compounds

Atmospheric pressure photoionization (APPI) is a novel method of ionization in liquid chromatography/mass spectrometry (LC/MS). It was originally developed in order to broaden the range of LC/MS ionizable compounds towards less polar compounds that cannot be analyzed by electrospray (ESI) and atmospheric pressure chemical ionization (APCI). Studies done thus far have shown that non-polar compounds that earlier were not ionizable in LC/MS can indeed be ionized by the use of APPI. However, the best ionization efficiency for low polarity samples has been achieved with low proton affinity (PA) solvents that are not suitable in reversed-phase LC (RP-LC). Here it is demonstrated that the signals for analytes with low proton affinities in acetonitrile can be increased 100-fold by using anisole as the dopant for APPI, which takes the sensitivity to the same level achieved in the analysis of high PA analytes.     

Thin‐layer chromatography and mass spectrometry coupled using proximal probe thermal desorption with electrospray or atmospheric pressure chemical ionization

An atmospheric pressure proximal probe thermal desorption sampling method coupled with secondary ionization by electrospray or atmospheric pressure chemical ionization was demonstrated for the mass spectrometric analysis of a diverse set of compounds (dyestuffs, pharmaceuticals, explosives and pesticides) separated on various high‐performance thin‐layer chromatography plates. Line scans along or through development lanes on the plates were carried out by moving the plate relative to a stationary heated probe positioned close to or just touching the stationary phase surface. Vapors of the compounds thermally desorbed from the surface were drawn into the ionization region of a combined electrospray ionization/atmospheric pressure chemical ionization source where they merged with reagent ions and/or charged droplets from a corona discharge or an electrospray emitter and were ionized. The ionized components were then drawn through the atmospheric pressure sampling orifice into the vacuum region of a triple quadrupole mass spectrometer and detected using full scan, single ion monitoring, or selected reaction monitoring mode. Studies of variable parameters and performance metrics including the proximal probe temperature, gas flow rate into the ionization region, surface scan speed, read‐out resolution, detection limits, and surface type are discussed. Published in 2010 by John Wiley & Sons, Ltd.     

Elucidation of the complex molecular structure of wheat straw lignin polymer by atmospheric pressure photoionization quadrupole time-of-flight tandem mass spectrometry

Wheat straw lignin was extracted using the novel CIMV procedure which selectively separates the cellulose, hemicelluloses and lignin. Solid-state (13)C NMR experiments using cross polarization/magic angle spinning (CP/MAS) were carried out on the extracted wheat straw lignin and some structural indices were revealed. Atmospheric pressure photoionization mass spectrometry (APPI-MS) has proven to be a powerful analytical tool capable of ionizing small to large lignin oligomers, which cannot be ionized efficiently by atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI). The APPI mass spectra of the extracted wheat straw lignin were recorded in the positive and negative ion modes. Positive ion mode APPI-MS indicated the exact presence of 39 specific oligomeric ions. Negative ion APPI-MS indicated the additional presence of at least 18 specific oligomeric ions. The structural characterization of this novel and complete series of 57 specific related oligomers was achieved by calculating the exact molecular masses measured by high-resolution quadrupole time-of-flight mass spectrometry (QqToF-MS). Some oligomeric species photoionized in both the positive and negative ion modes to form the respective protonated and deprotonated molecules. Low-energy collision-induced dissociation tandem mass spectrometric analyses performed with a QqToF-MS/MS hybrid instrument provided unique dissociation patterns of the complete series of novel precursor ions. These MS/MS analyses provided diagnostic product ions, which enabled us to determine the exact molecular structures and arrangement of the selected 57 different related ionic species.     

Advantages of atmospheric pressure photoionization mass spectrometry in support of drug discovery

The performance of the atmospheric pressure photoionization (APPI) technique was evaluated against five sets of standards and drug-like compounds and compared to atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI). The APPI technique was first used to analyze a set of 86 drug standards with diverse structures and polarities with a 100% detection rate. More detailed studies were then performed for another three sets of both drug standards and proprietary drug candidates. All 60 test compounds in these three sets were detected by APPI with an overall higher ionization efficiency than either APCI or ESI. Most of the non-polar compounds in these three sets were not ionized by APCI or ESI. Analysis of a final set of 201 Wyeth proprietary drug candidates by APPI, APCI and ESI provided an additional comparison of the ionization techniques. The detection rates in positive ion mode were 94% for APPI, 84% for APCI, and 84% for ESI. Combining positive and negative ion mode detection, APPI detected 98% of the compounds, while APCI and ESI detected 91%, respectively. This analysis shows that APPI is a valuable tool for day-to-day usage in a pharmaceutical company setting because it is able to successfully ionize more compounds, with greater structural diversity, than the other two ionization techniques. Consequently, APPI could be considered a more universal ionization method, and therefore has great potential in high-throughput drug discovery especially for open access liquid chromatography/mass spectrometry (LC/MS) applications.     

On-line characterization of gaseous and particulate organic analytes using atmospheric pressure chemical ionization mass spectrometry

A modified atmospheric pressure chemical ionization ion source is applied for direct analysis of volatile or low volatile organic compounds in air. The method is based on the direct introduction of the analytes in the gas phase and/or particle phase into the ion source of a commercial ion-trap mass spectrometer. Two methods are employed for the production of primary ions at atmospheric pressure, photoionization and corona discharge. It is shown that in the presence of a dopant, photoionization can be a highly efficient ionization method also for real-time analysis with detection limits for selected analytes in the lower ppt-range. Using corona discharge for the production of primary ions, which is instrumentally easier since no additional chemicals have to be added to the sample flow, we demonstrate the analytical potential of on-line atmospheric pressure chemical ionization mass spectrometry for reaction monitoring experiments. To do so, an atmospherically relevant gas phase reaction is carried out in a 500 l reaction chamber and gaseous and particulate compounds are monitored in the positive and negative ion mode of the mass spectrometer.     

Investigation of chromatographic peak broadening in supercritical fluid chromatography/atmospheric pressure chemical ionization mass spectrometry

Multimode ionization source allows for switching between different ionization techniques, for example, electrospray and atmospheric pressure chemical ionization, within a single analysis. Supercritical fluid chromatography can handle a wide polarity range of substances from hydrophilic to lipophilic in a single run and can undoubtedly benefit from versatility of this ion source. Nevertheless, we observed a significant chromatographic peak broadening effect in atmospheric pressure chemical ionization mode during supercritical fluid chromatography‐mass spectrometry analysis of volatile flavor compounds with a dual ion source named ESCi (Waters). Surprisingly, this effect was not related to the separation process but was triggered solely by the ion source conditions. Neither of photodiode array detector, electrospray mode nor a dedicated atmospheric pressure chemical ionization source suffered from such a phenomenon. Chromatographic peak profiles of ten test substances obtained with the dual ion source were compared with photodiode array detector data as a reference. The broadening effect was more pronounced for volatile compounds with low polarity. Dependence of peak broadening on the ion source settings was systematically investigated. Tuning of desolvation gas flow and its temperature dramatically reduced peak distortion and increased detection sensitivity.     

Atmospheric pressure laser desorption/chemical ionization mass spectrometry: a new ionization method based on existing themes

We have designed and constructed an atmospheric pressure laser desorption/chemical ionization (AP-LD/CI) source that utilizes a laser pulse to desorb intact neutral molecules, followed by chemical ionization via reagent ions produced by a corona discharge. This source employs a heated capillary atmospheric pressure inlet coupled to a quadrupole ion trap mass spectrometer and allows sampling under normal ambient air conditions. Preliminary results demonstrate that this technique provides approximately 150-fold increase in analyte ions compared to the ion population generated by atmospheric pressure infrared matrix-assisted laser desorption/ionization (AP-IR-MALDI).     

Hydrocarbon detection using laser ion mobility spectrometry

A Laser Ion Mobility Spectrometer has been set up and trace detection experiments have been performed. We find that laser ionization almost selectively ionizes aromatic hydrocarbons. Aliphatic hydrocarbons are only laser-ionized in case these contain conjugated double bonds. As, in contrast to radioactive ion mobility spectrometry, background air constituents and air contaminants cannot be ionized, drift spectra are inherently simple and easily interpretable. We show that a laser ion mobility spectrometer can be operated in two basically different modes, either using tunable or fixed-frequency laser sources. In the tunable laser mode, aromatic hydrocarbons can be detected in the positive mode and distinguished from each other on account of their different excitation wavelengths and ion drift times. In the fixed-frequency mode, specially chosen and intentionally admitted aromatic hydrocarbons are laser ionized and the primary ionization is transferred to non-aromatic species by means of atmospheric pressure chemical ionization. In this latter mode of operation nitroglycerin and triacetone triperoxide, two non-aromatic high explosives, could be detected.