Transition metal-catalyzed isomerization and polymerization of allylic and enolic ethers

Alkyl allyl ethers undergo facile thermally induced isomerization to alkyl 1-propenyl ethers in the presence of Group VIII transition metal carbonyl compounds as catalysts. The addition of a silane containing a Si H bond to these systems results in a catalyst system that is capable of not only isomerizing the allyl ether to the 1-propenyl ether, but further results in the polymerization of these later compounds. High molecular weight polymers can be obtained directly from the alkyl allyl ether in a single step. The scope and limitations of these polymerizations are described. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2521–2532, 1997     

Dicobalt octacarbonyl-catalyzed cationic polymerization of allylic and enolic ethers

In the presence of silanes bearing Si H groups, dicobalt octacarbonyl [Co₂(CO)₈] efficiently catalyzes the cationic polymerization of a wide variety of enol ether and other related monomers including vinyl ethers, 1-propenyl ethers, 1-butenyl ethers, 2,3-dihydrofuran, 3,4-dihydro-2H-pyran, ketene acetals, and allene ethers. In addition, this catalyst system is also effective for the polymerization of complimentary allylic and propargylic ethers by a process involving tandem isomerization and cationic polymerization. This latter process occurs by a stepwise mechanism in which the allylic or propargylic ether is first isomerized, respectively, to the corresponding enol ether or allenic ether and then this latter compound is rapidly cationically polymerized in the presence of the catalyst. In accord with this mechanism, it has been shown that the structure of the polymers prepared from related enol and allyl ethers using the above catalyst system are identical. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1579–1591, 1997     

Transition metal-catalyzed tandem isomerization and cationic polymerization of allyl ethers. II. Structural and mechanistic studies

In the presence of organosilanes, dicobalt octacarbonyl catalyzes the polymerization of alkyl allyl ethers to give high molecular weight polymers. This article reports the results of a detailed mechanistic study of this new polymerization reaction. The evidence obtained in this study supports a stepwise process involving first, the reaction of dicobalt octacarbonyl with an organosilane to form HCo(CO)₄ and R₃SiCo(CO)₄. In subsequent steps, HCo(CO)₄ isomerizes the allyl ether to a 1-propenyl ether and then this compound is polymerized by the formal transfer of a silyl cation from R₃SiCo(CO)₄. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1985–1997, 1997     

Interaction of epoxy and vinyl ethers during photoinitiated cationic polymerization

A kinetic study of the independent and simultaneous photoinitiated cationic polymerization of a number of epoxide and vinyl (enol) ether monomer pairs was conducted. The results show that, although no appreciable copolymerization takes place, these monomers undergo complex interactions with one another. These interactions are highly dependent on the epoxide monomer employed. In all cases, the rate of epoxide ring-opening polymerization is accelerated, whereas that of the vinyl ether is depressed. When highly reactive cycloaliphatic epoxides are subjected to photoinitiated cationic polymerization in the presence of vinyl ethers, the two polymerizations proceed in a sequential fashion, with the vinyl ether polymerization taking place after the epoxide polymerization is essentially complete. A mechanism involving an equilibration between alkoxy-carbenium and oxonium ions has been proposed to explain the results. In addition, the free-radical-induced decomposition of the diaryliodonium salt photoinitiator also takes place, leading to a decrease in the induction period. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4007–4018, 1999     

Cationic polymerization of vinyl ethers and p‐methoxystyrene by a benign initiating system: Silver salt/arylmethyl halide/dialkyl sulfide

Three vinyl ethers (VEs: isobutyl vinyl ether, ethyl vinyl ether, and isopropyl vinyl ether) and an active styrene derivative, p‐methoxystyrene (pMOS), were employed for cationic polymerization using a benign initiating system, AgClO₄/Ph₂CHBr/dialkyl sulfide. Choosing a sulfide with suitable nucleophilicity was important for achieving controlled polymerization. Additionally, selecting an appropriate reaction temperature based on monomer reactivity was also crucial for suppressing side reactions. Highly controlled polymerizations of VEs and pMOS were further confirmed by proton nuclear magnetic resonance (¹H NMR) and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS). In addition, the coordination of the arylmethyl cation to the added base obviously influenced the initiation, as demonstrated by ¹H NMR analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 861–870     

Synthesis and cationic photopolymerization of 1‐butenyl and 1‐pentenyl ethers

Several 1‐butenyl and 1‐pentenyl ether monomers were prepared by the ruthenium catalyzed multistage double bond isomerization of the corresponding 3‐butenyl and 4‐pentenyl ethers and characterized. Employing tris(triphenylphosphine)ruthenium(II) dichloride as a catalyst, the isomerization of octyl 4‐pentenyl ether to octyl 1‐pentenyl ether in 60% yield could be achieved in 110 min at 200–205°C. Under similar conditions, 3‐butenyl octyl ether was isomerized to 1‐butenyl octyl ether in greater than 99% yield. The reactivities of both types of monomers in photoinitiated cationic polymerization were determined using real‐time infrared spectroscopy and the monomers were found to polymerize at very nearly the same rate in the presence of a diaryliodonium salt photoinitiator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 199–209, 1999     

The synthesis and cationic photopolymerization of monomers based on dicyclopentadiene

Several new epoxide monomers based on dicyclopentadiene (DCPD) were prepared using straightforward reaction chemistry. Those monomer-bearing groups in addition to the epoxy moiety, which can stabilize free radicals, display a pronounced acceleration of the rate of cationic ring-opening polymerization in the presence of diaryliodonium salt photoinitiators. Mechanistic studies conducted with the aid of model compounds have shown that the apparent rate acceleration is due to the free radical chain-induced decomposition of the photoinitiator. One of the chain carriers in this reaction involves a monomer-derived free radical. Also prepared was dicyclopentadiene monomer (V) bearing polymerizable epoxide and 1-propenyl ether groups in the same molecule. The functional groups in V appear to undergo independent vinyl and epoxide ring-opening polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3427–3440, 1999     

Cationic cyclopolymerization of new divinyl ethers: The effect of ether and ester neighboring functional groups on their cyclopolymerization tendency

The cationic polymerization of two new divinyl ethers, 1‐(2‐vinyloxyethoxy)‐2‐[(2‐vinyloxyethoxy)carbonyl]benzene ( 2 ) and 1,2‐bis[(2‐vinyloxyethoxy)carbonyl]benzene ( 3 ), as well as 1,2‐bis(2‐vinyloxyethoxy)benzene ( 1 ), with BF₃OEt₂ in CH₂Cl₂ at 0 °C at low initial monomer concentrations ([M]₀ = 0.15 and 0.075 M) gave soluble polymers with relatively high molecular weights and broad molecular weight distributions (MWDs), whereas reactions with the HCl/ZnCl₂ initiating system yielded soluble polymers with relatively narrow MWDs (weight‐average molecular weight/number‐average molecular weight ? 1.6) under similar reaction conditions. An NMR structural analysis of the HCl/ZnCl₂‐mediated polymers from the divinyl ethers showed that poly( 1 ) had virtually no unreacted vinyl ether groups throughout the polymerization (monomer conversion = 28–98%), whereas poly( 2 ) and poly( 3 ) possessed some amount of unreacted vinyl ether groups in the initial stage of the polymerization; the content of the vinyl groups of poly( 2 ) was 18 mol % at a 15% monomer conversion, and the content of the vinyl groups of poly( 3 ) was 31 mol % at an 18% monomer conversion. Therefore, divinyl ether 1 underwent cyclopolymerization exclusively to give almost completely cyclized polymers [degree of cyclization (DC) ～ 100%], whereas divinyl ethers 2 and 3 exhibited a lower cyclopolymerization tendency [DC for poly( 2 ) = 82%; DC for poly( 3 ) = 69%]. The differences in the cyclopolymerization tendencies among the divinyl ethers can be explained by the differences in the solvation powers of the neighboring functional groups adjacent to the vinyl ether moiety with the active center: the ether oxygen of the ether neighboring group solvates intramolecularly with the active center to accelerate the intramolecular propagation, but such an interaction is less effective with the more electron‐deficient oxygen attached to the carbonyl group of the ester neighboring group. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 281–292, 2003     

Expanding vinyl ether monomer repertoire for ring-expansion cationic polymerization: Various cyclic polymers with tailored pendant groups

Herein, we clarified the ring-expansion cationic polymerization with a cyclic hemiacetal ester (HAE)-based initiator was versatile in terms of applicable vinyl ether monomers. Although there was a risk that higher reactive vinyl ethers may incur β-H elimination of the HAE-based cyclic dormant species to irreversibly give linear chains, the polymerizations were controlled to give corresponding cyclic polymers from various alkyl vinyl ethers of different reactivities. Functional vinyl ether monomers were also available, and for instance a vinyl ether monomer carrying an initiator moiety for metal-catalyzed living radical polymerization in the pendant allowed construction of ring-linear graft copolymers through the grafting-from approach. Furthermore, ring-based gel was prepared via the addition of divinyl ether at the end of the ring-expansion polymerization, where multi HAE bonds cyclic polymers or fused rings were crosslinked with each other. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3082–3089     

A benign initiating system for cationic polymerization of isobutyl vinyl ether: Silver salt/aryl(alkyl) halide/lewis base

Aryl(alkyl) halides and silver salts were studied as environmentally benign initiating systems for cationic polymerization of isobutyl vinyl ether (IBVE). The reactivity of the benzyl cations could be effectively controlled by using dimethyl sulfide (Me₂S) as an additive, which was shown to be an effective Lewis base (LB), and diethyl ether as a reaction solvent. Detailed study of various benzyl cations and the order of addition of the reagents revealed that the reaction was controlled by the electronic and steric features of aryl(alkyl) halides, LBs, and IBVE, and a plausible reaction mechanism was presented. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2050–2058     

Living cationic polymerization of amide‐functional vinyl ethers: Specific properties of SnCl4‐based initiating system

Living cationic copolymerization of amide‐functional vinyl ethers with isobutyl vinyl ether (IBVE) was achieved using SnCl₄ in the presence of ethyl acetate at 0 °C: the number–average molecular weight of the obtained polymers increased in direct proportion to the monomer conversion with relatively low polydispersity, and the amide‐functional monomer units were introduced almost quantitatively. To optimize the reaction conditions, cationic polymerization of IBVE in the presence of amide compounds, as a model reaction, was also examined using various Lewis acids in dichloromethane. The combination of SnCl₄ and ethyl acetate induced living cationic polymerization of IBVE at 0 °C when an amide compound, whose nitrogen is adjacent to a phenyl group, was used. The versatile performance of SnCl₄ especially for achieving living cationic polymerization of various polar functional monomers was demonstrated in this study as well as in our previous studies. Thus, the specific properties of the SnCl₄ initiating system are discussed by comparing with the Et_xAlCl_3?x systems from viewpoints of hard and soft acids and bases principle and computational chemistry. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6129–6141, 2008     

Synthesis and characterization of novel photopolymerizable multifunctional 2-propenyl ether analogues

Monomers bearing two, three, four, and six cationically polymerizable aryl 2-propenyl groups were synthesized and characterized. These compounds can be readily prepared by the catalytic isomerization of the corresponding allyl compounds. Strong bases and tris(triphenylphosphine)ruthenium(II) dichloride were used as the catalysts for these isomerizations. A study of the cationic photopolymerizations of these novel monomers was carried out using a diaryliodonium salt photoinitiator. The polymerization involves a stepwise condensation of the monomers followed by an intramolecular ring closure to form polyindanes. The resulting photopolymerized polymers underwent thermal oxidative decomposition at temperatures over 430°C. © 1993 John Wiley & Sons, Inc.     

Living cationic polymerization of dihydrofuran and its derivatives

Cationic polymerization of 2,3‐dihydrofuran (DHF) and its derivatives was examined using base‐stabilized initiating systems with various Lewis acids. Living cationic polymerization of DHF was achieved using Et_1.5AlCl_1.5 in toluene in the presence of THF at 0 °C, whereas it has been reported that only less controlled reactions occurred at 0 °C. Monomer‐addition experiments of DHF and the block copolymerization with isobutyl vinyl ether demonstrated the livingness of the DHF polymerization: the number–average molecular weight of the polymers shifted higher with low polydispersity as the polymerization proceeded after the monomer addition. Furthermore, this base‐stabilized cationic polymerization system allowed living polymerization of ethyl 1‐propenyl ether and 4,5‐dihydro‐2‐methylfuran at ?30 and ?78 °C, respectively. In the polymerization of 2,3‐benzofuran, the long‐lived growing species were produced at ?78 °C. The obtained polymers have higher glass transition temperatures compared to poly(acyclic alkyl vinyl ether)s. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4495–4504, 2008     

Chemoselective hydrosilations. I. Synthesis and photopolymerization of 1-propenyl ether functionalized siloxanes

The synthesis of 1-propenyl ether-functionalized siloxanes (PFS) has been achieved by the controlled, rhodium-catalyzed, chemoselective hydrosilation of 1-allyloxy-4(1-propen-oxy) butane with various H-functional siloxanes. It was shown that the hydrosilation pro-ceeds exclusively at the allyl ether group of 1-allyloxy-4(1-propenoxy) butane without par-ticipation at the 1-propenyl ether group. The photoinduced cationic polymerization of these monomers was studied using various analytical techniques and found to take place very rapidly. © 1995 John Wiley & Sons, Inc.     

MALDI‐TOF‐MS analysis of living cationic polymerization of vinyl ethers. III. Polymerization with SnCl4 and TiCl4 in the absence of additives

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis revealed that the precision control (or the living nature) of the cationic polymerization of vinyl ethers with SnCl₄ or TiCl₄ critically depends on the Lewis acid concentration and temperature. Specifically, at an extremely low Lewis acid concentration, for example, the polymerization with the HCl–vinyl ether adduct (an initiator) is living at ?78 °C in CH₂Cl₂ solvent, whereas side reactions occurred at a higher concentration of SnCl₄ or at a higher temperature, ?15 °C. This was more pronounced with SnCl₄ than with TiCl₄, which was due to a stronger Lewis acidity of SnCl₄ as suggested by NMR analysis of the model reactions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1258–1267, 2001     

Facile one‐pot synthesis and thermal cyclopolymerization of aryl bistrifluorovinyl ether monomers bearing reactive pendant groups

A diverse pool of aryl bistrifluorovinyl ether (BTFVE) compounds with reactive pendant groups were prepared in a facile, high yielding three step “one‐pot” synthesis from commercial 4‐bromo(trifluorovinyloxy)benzene. Monomers were confirmed from ATR–FTIR, ¹H, ¹³C, and ¹⁹F NMR, and HRMS analysis. Aryl BTFVE compounds were thermally polymerized to afford perfluorocyclobutyl (PFCB) aryl ether polymers with high number–average molecular weight (M_n) for homopolymers (17,050–27,090) and copolymers with 4,4′‐bis(trifluorovinyloxy)biphenyl monomers (27,860–56,500). The PFCB aryl ether homo‐ and copolymers collectively possess high thermal stability (>299 °C in N₂) and are readily solution processable producing optically transparent films. The thermal polymerization was achieved and reactive moieties remained intact, aside from those functionalized with acrylates. In the case with acrylate functionalized polymers, orthogonal polymerization was achieved by first photopolymerizing the acrylates followed by thermal curing of the aryl trifluorovinyl ether endgroups. Preliminary results in this study produced the successful preparation of photodefinable PFCB aryl ether material. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1887–1893, 2010     

Cationic polymerization behavior of isobutyl vinyl ether with arenesulfonates as non‐salt‐type latent thermal initiators

Substituted and unsubstituted benzenesulfonic acid cyclohexyl esters (1–7) were synthesized, and their possibility as latent thermal initiators in the cationic polymerization of isobutyl vinyl ether (IBVE) was examined to develop novel non‐salt type latent cationic initiators. Thermal decomposition of cyclohexyl p‐nitrobenzenesulfonate (2) in C₆D₆ at 80°C proceeded to exclusively afford cyclohexene as well as p‐nitrobenzenesulfonic acid. Cationic polymerization of IBVE with 1 mol % of an arenesulfonate (1–6) in bulk was carried out at 40–100°C for 12 h. No polymerization took place below 50°C, while the consumption of IBVE depending on both the polymerization temperature and the structure of the arenesulfonates was observed above 60°C. The obtained polyIBVEs showed bimodal GPC curves in several cases, revealing the intervention of two independent propagation species in the polymerization. The cationic polymerization of IBVE with cyclohexyl 2,4,6‐triisopropylbenzenesulfonate (7) at 80°C confirmed the acceleration effect of bulkiness on the polymerization rate. It was concluded that the polymerization was largely dependent on both electronic and steric factors of the aryl groups of the initiators which were directly related to the stability of the sulfonate anions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 293–301, 1999     

Living cationic polymerization of vinyl ethers in the presence of a strong base: Poisonous or helpful?

A quite small dose of a poisonous species was found to induce living cationic polymerization of isobutyl vinyl ether (IBVE) in toluene at 0 °C. In the presence of a small amount of N,N‐dimethylacetamide, living cationic polymerization of IBVE was achieved using SnCl₄, producing a low polydispersity polymer (weight–average molecular weight/number–average molecular weight (M_w/M_n) ≤ 1.1), whereas the polymerization was terminated at its higher concentration. In addition, amine derivatives (common terminators) as stronger bases allow living polymerization when a catalytic quantity was used. On the other hand, EtAlCl₂ produced polymers with comparatively broad MWDs (M_w/M_n ～ 2), although the polymerization was slightly retarded. The systems with a strong base required much less quantity of bases than weak base systems such as ethers or esters for living polymerization. The strong base system exhibited Lewis acid preference: living polymerization proceeded only with SnCl₄, TiCl₄, or ZnCl₂, whereas a range of Lewis acids are effective for achieving living polymerization in the conventional weak base system such as an ester and an ether. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6746–6753, 2008     

Relation between the reactivities of vinyl monomers in ionic polymerizations and their 1H NMR spectra

¹H NMR chemical shifts of the protons in the vinyl groups of monomers are correlated with their reactivities in anionic, coordinated anionic, and cationic polymerizations. The relative reactivities of styrenes in anionic addition reactions with living polystyrene increase linearly with the chemical shift of the proton trans to the substituent (δ_H1). Only the plot for 2,4,6-trimethylstyrene deviates very much from the linear relation because of the large steric hindrance. The relative reactivities of methacrylates in anionic copolymerizations increase with increasing chemical shifts of protons attached to the β-carbon of methacrylates. In cationic polymerizations of styrenes, the relative reactivities decrease with increasing δ_H1. The relative reactivities in coordinated anionic polymerizations with Ti-containing Ziegler initiators show a typical feature of cationic polymerization, and those with V-containing initiators show a typical feature of anionic polymerization, indicating the importance of the coordination process in the propagation reaction with Ti-containing initiator systems. From the results, it can be concluded that the chemical shifts of the protons attached to the β-carbon of vinyl monomers can be used as a practical measure of the reactivity of vinyl monomers in ionic polymerizations and also as a tool for understanding the mechanism of polymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2134–2147, 2002     

Reactions of vinyl ethers with 2‐cyano‐2‐propyl and benzoyloxy radicals

tert‐Butyl, cyclohexyl, n‐propyl, and n‐dodecyl vinyl ethers have been used as comonomers with styrene and methyl methacrylate using ¹³C‐enriched samples of azobis(isobutyronitrile) and benzoyl peroxide as initiators at 60°C. Examination by ¹³C‐NMR spectroscopy of either (¹³CH₃)₂C(CN) or Ph¹³COO end‐groups in the products has shown that the vinyl ethers have low reactivities toward the 2‐cyano‐2‐propyl radical but high reactivities toward the benzoyloxy radical. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 771–777, 1999