Model block–graft copolymer via anionic living polymerization: Preparation and characterization of polystyrene-block-[poly(p-hydroxystyrene)-graft-poly(ethylene oxide)]-block-polystyrene

A model graft copolymer in which position of graft points was set to the center of a backbone molecule was prepared via anionic living polymerization. Polystyrene-block-poly(p-tert-butoxystyrene)-block-polystyrene (PSt-b-PBSt-b-PSt) was prepared by three-stage sequential addition. The tert-butyl group was removed from PBSt by hydrogen bromide to yield PSt-b-PHSt-b-PSt, having a poly(p-hydroxystyrene) (PHSt) block. The hydroxyl group of PHSt was reacted with dimeric potassium dianions of 1, 1-diphenylethylene (DPE-K) or cumyl potassium (cumyl K) to yield the corresponding macromolecular initiators of PSt-b-PHSt⁻K⁺-b-PSt containing the potassium alkoxide ion of PHSt. The newly formed alkoxide groups and remaining initiators of DPE-K or cumyl K are capable of initiating the additionally introduced ethylene oxide (EO). Thus, two block–graft copolymers of polystyrene-block-[poly(p-hydroxystyrene)-graft-poly(ethylene oxide)]-block-polystyrene (PSt-b-(PHSt-g-PEO)-b-PSt) were prepared by a “grafting from” process (backbone initiation). A PSt-b-PHSt-b-PSt backbone (M_n = 1.7₅ × 10⁵ by osmometry and M_w/M_n = 1.0₈ by GPC), and two PSt-b-(PHSt-g-PEO)-b-PSt block–graft copolymers (M_n = 2.4₅ × 10⁵ by osmometry and M_w/M_n < 1.1₀ by GPC) had narrow molecular weight distributions. A relationship between nonquantitative metallation and spacing of the graft points on a backbone molecule was discussed in detail. Two benzene-cast films formed clear microphase-separated structures of lamellar structure. The dependence of composition on the morphology of the block–graft copolymers was found to differ from that of common block copolymers. A degree of crystallinity of PEO segment and lamellar thickness of PEO phase serving as graft molecule were also found to differ from those of homo PEO and/or PEO segment in common block copolymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3021–3034, 1998     

Polyolefin graft copolymers via living polymerization techniques: Preparation of poly(n‐butyl acrylate)‐graft‐polyethylene through the combination of Pd‐mediated living olefin polymerization and atom transfer radical polymerization

Poly(n‐butyl acrylate)‐graft‐branched polyethylene was successfully prepared by the combination of two living polymerization techniques. First, a branched polyethylene macromonomer with a methacrylate‐functionalized end group was prepared by Pd‐mediated living olefin polymerization. The macromonomer was then copolymerized with n‐butyl acrylate by atom transfer radical polymerization. Gel permeation chromatography traces of the graft copolymers showed narrow molecular weight distributions indicative of a controlled reaction. At low macromonomer concentrations corresponding to low viscosities, the reactivity ratios of the macromonomer to n‐butyl acrylate were similar to those for methyl methacrylate to n‐butyl acrylate. However, the increased viscosity of the reaction solution resulting from increased macromonomer concentrations caused a lowering of the apparent reactivity ratio of the macromonomer to n‐butyl acrylate, indicating an incompatibility between nonpolar polyethylene segments and a polar poly(n‐butyl acrylate) backbone. The incompatibility was more pronounced in the solid state, exhibiting cylindrical nanoscale morphology as a result of microphase separation, as observed by atomic force microscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2736–2749, 2002     

Synthesis and crystallization behavior study of syndiotactic polystyrene‐g‐isotactic polypropylene (sPS‐g‐iPP) graft copolymers

Based on coordination polymerization mechanism only, novel stereoregular graft copolymers with syndiotactic polystyrene main chain and isotactic polypropylene side chain (sPS‐g‐iPP) were synthesized via two steps of catalytic reactions. First, a chain transfer reaction was initiated by a chain transfer complex composed of a styrene derivative, 1,2‐bis(4‐vinylphenyl)ethane, and hydrogen in propylene polymerization mediated by rac‐Me₂Si[2‐Me‐4‐Ph(Ind)]₂ZrCl₂ and MAO, which gave iPP macromonomer bearing a terminal styryl group (iPP‐t‐St). Then the iPP‐t‐St macromonomers of varied molecular mass were engaged in syndiospecific styrene polymerization over a typical mono‐titanocene catalyst (CpTiCl₃/MAO) under different conditions to produce sPS‐g‐iPP graft copolymers of varied structure. With an effective purification process, well‐defined sPS‐g‐iPP copolymers were obtained, which were then subjected to differential scanning calorimetry (DSC) and polarized optical micrograph (POM) studies. The graft copolymers were generally found with dual melting and crystallization temperatures, which were ascribable respectively to the sPS backbone and iPP graft. However, it was revealed that the two segments displayed largely different melting and crystallization behaviors than sPS homopolymer and the precursory iPP‐t‐St macromonomer. Consequently, the graft copolymer exhibited much distinctive crystalline morphologies when compared with their individual components. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Novel Dual-Grafted Copolymer Bearing Glassy Polystyrene and Crystalline Poly(Ethylene Oxide) as Side Chains

A novel grafted copolymer with two different types of side chains was synthesized via a combination of grafting-onto and grafting-from strategy. Graft copolymer with one side chains polybutadiene-graft-polystyrene (PB-g-PS) was first synthesized though the grafting-onto method. Following the subsequent grafting-from method, the second kind of side chain was introduced to the copolymer with anionic ring open polymerization of ethylene oxide, obtaining dual-grafted copolymer polybutadiene-graft-(polystyrene; poly(ethylene oxide)) (PB-g-(PS;PEO)). By this combined strategy, linear and star-shaped dual-grafted copolymer were synthesized. The resulting dual-grafted copolymers had controlled molecular weights and narrow molecular weight distributions (Mw/Mn < 1.20). The thermal behavior of this dual-grafted copolymer bearing glassy and crystalline side chains was determined by differential scanning calorimetry (DSC), revealing that poly(ethylene oxide) grafts underwent confined crystallization, and the star-shaped copolymer had more confinement effects than did the linear ones.     

Thermosensitive diblock copolymers with designed molecular weight distribution: Synthesis by continuous living cationic polymerization and micellization behavior

The synthesis of diblock copolymers with designed molecular weight distributions (MWDs) was successfully demonstrated in a continuous living cationic polymerization system using simple equipment. The control of MWDs was achieved by gradually feeding a polymerization reaction mixture into a terminating agent. As thermosensitive diblock copolymers, poly(vinyl ethers) containing a thermosensitive segment with oxyethylene side chains and a hydrophilic segment were prepared. The polymerization was carried out in a gas‐tight microsyringe, and the polymerization mixture was added continuously into methanol during the second‐stage polymerization. The self‐association behavior of the resulting diblock copolymers was evaluated by dynamic light scattering in water. MWD‐designed polymers with thermosensitive segments that varied continuously in length and hydrophilic segments of nearly uniform lengths formed micelles with a broad size distribution. Conversely, polymers with nearly uniform thermosensitive segments and hydrophilic segments of different lengths formed micelles with a narrow size distribution, as observed with conventional narrow MWD diblock copolymers. Thus, the MWD of the thermosensitive segment proved a decisive factor in achieving fine control of self‐association. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2212–2221, 2008     

Synthesis of PP graft copolymers via anionic living graft-from reactions of polypropylene containing reactive p-methylstyrene units

In this article, we discuss a new chemical route for preparing polypropylene (PP) graft copolymers containing a PP backbone and several (polar and nonpolar) polymer side chains, including polybutadiene, polystyrene, poly(p-methylstyrene), poly(methyl methacrylate), and polyacrylonitrile. The new PP graft copolymers had a controlled molecular structure and a known PP molecular weight, graft density, graft length, and narrow molecular weight distribution of the side chains. The chemistry involves an intermediate poly(propylene-co-p-methylstyrene) copolymer containing few p-methylstyrene (p-MS) units. The methyl group in a p-MS unit could be lithiated selectively by alkylithium to form a stable benzylic anion. Because of the insolubility of the PP copolymer at room temperature, the excess alkylithium could be removed completely from the lithiated polymer. By the addition of the anionically polymerizable monomers, including polar and nonpolar monomers, the stable benzylic anions in PP initiated a living anionic graft-from polymerization at ambient temperature to produce PP graft copolymers without any significant side reactions. The side-chain length was basically proportional to the reaction time and monomer concentration. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4176–4183, 1999     

Synthesis of polar block grafted syndiotactic polystyrenes via a combination of iridium‐catalyzed activation of aromatic C?H bonds and atom transfer radical polymerization

A combination of iridium‐catalyzed C H activation/borylation and atom transfer radical polymerization (ATRP) was used to generate polar graft copolymers of syndiotactic polystyrene (sPS). The borylation at aromatic C H bonds of sPS and subsequent oxidation of boronate ester proceeded without negatively affecting the molecular weight properties and the tacticity of sPS. A macroinitiator suitable for ATRP could be synthesized by the esterification of 2‐bromo‐2‐methylpropionyl bromide and hydroxy‐functionalized sPS. The graft polymerizations of methyl methacrylate and tert‐butyl acrylate from the macroinitiator using ATRP afforded polar block grafted sPS materials, syndiotactic polystyrene‐graft‐poly(methyl methacrylate) (sPS‐g‐PMMA) and syndiotactic polystyrene‐graft‐poly(tert‐butyl acrylate) (sPS‐g‐PtBA). The latter was hydrolyzed to yield an amphiphilic graft copolymer, syndiotactic polystyrene‐graft‐poly(acrylic acid) (sPS‐g‐PAA). The structures of the copolymers were characterized by NMR and FTIR spectroscopies. Size exclusion chromatography and ¹H NMR spectroscopy were used to study any changes in the molecular weight properties from the parent polymer. A decrease in the hydrophobicity of the graft copolymers was confirmed by water contact angle measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6655–6667, 2009     

SYNTHESIS AND POLYMERIZATION OF α-METHACRYLYOXYLETHYLOXYCARBONYLMETHYL-ω-(N,N-DIETHYLDITHIOCARBAMYL)POLYSTYRENE MACROMONOMERS

Polystyrene macromonomers with different molecular weight were prepared by radical polymerization of styrene(St) in benzene using β-methacryloxylethyl 2-N,N-diethyldithiocarbamylacetate (MAEDCA) as a monomer-iniferter.Characterization of the macromonomer by ~1H-NMR showed that the end groups were α-methacrylyoxylethyloxycarbonyl-methyl and ω-(N,N-diethyldithiocarbamyl). The macromonomer was difficult to homopolymerize, but it was easilycopolymerized with methyl methacrylate (MMA) initiated by AIBN to form graft copolymers (PMMA-g-PSt) with PStbranches randomly distributed along the PMMA backbone. Copolymerization reaction and the structure of the graftcopolymers were strongly affected by M_n and concentration of the macromonomer. The composition and M_n of the purified graft copolymer were determined by ~1H-NMR and GPC analysis.     

Synthesis of graft copolymers onto styrenic polymer backbone via “grafting from” raft process

A new synthetic methodology is developed for preparing graft copolymers via RAFT polymerization method by the “R group approach” onto styrenic polymers. In this approach, latent sites of the styrenic polymer was brominated first and then converted into macro‐RAFT agents with pyrazole and thio dodecyl as the Z groups. This was used to synthesize graft copolymer such as polystyrene‐graft‐polymethyl methacrylate (PS‐g‐PMMA), polystyrene‐graft‐poly(isobornyl acrylate), polystyrene‐graft‐poly[2‐(acetoacetoxy)ethyl methacrylate] (PS‐g‐PAEMA), and poly(para‐methoxystyrene)‐graft‐polystyrene (P(p‐MS)‐g‐PS). The polymers are characterized by gel permeation chromatography, ¹H NMR, IR, and atomic force microscopy (AFM). The morphology of PS‐g‐PMMA in THF was investigated using AFM and island‐like features were noticed. The AFM studies of the PS‐g‐PAEMA graft copolymers revealed the formation of globules and ribbon‐like morphological features. The PS‐g‐PAEMA graft copolymers form complex with Fe(III) in dimethylformamide and the AFM studies suggest the formation of globular superstructures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Effect of block molecular weight distribution on the structure formation in block copolymer/homopolymer blends

The effect of homopolymer (hP) addition on the structure formation in lamellar amorphous block copolymers (BCP) with narrow‐ and broad‐molecular weight distribution (MWD) was studied using small‐angle X‐ray scattering and transmission electron microscopy. The systems in our study consist of blends of a poly(styrene‐b‐methyl acrylate) copolymer with block‐selective broad MWD of the poly(methyl acrylate) domain as well as polystyrene and poly(methyl acrylate) hPs with molecular weight less than the corresponding block of the copolymer. Homopolymer addition to the broad MWD domain of the BCP is found to induce structural changes similar to narrow MWD BCP/hP blend systems. Conversely, addition of hP to the narrow MWD domain is found to induce a more pronounced expansion of lamellar domains due to the segregation of the hP to the center region within the host copolymer domain. With increasing hP concentration, the formation of a stable two‐phase regime with coexisting lamellar/gyroid microphases is observed that is bounded by uniform lamellar phase regimes that differ in the distribution of hP within the corresponding narrow MWD block domain. The segregation of low‐molecular weight hP to the center region of the narrowdisperse domains of a broad MWD BCP is rationalized as a consequence of the more stretched chain conformations within the narrowdisperse block that are implied by the presence of a disperse adjacent copolymer domain. The increase of chain stretching reduces the capacity of the narrowdisperse block to solubilize hP additives and thus provides a driving force for the segregation of hP chains to the center of the host copolymer domain. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 106–116, 2012     

Studies on the self-assembly behavior of the amphiphilic block copolymer of PSt-b-PAA in apolar solvents with polar fluorescent probe

The block copolymer of polystyrene-b-poly(butyl acrylate) (PSt-b-PBA) with a well-defined structure was synthesized by atom transfer radical polymerization (ATRP); its structure was characterized, and the living polymerization was also validated by gel permeation chromatography, Fourier transform infrared, and ¹H NMR measurements. Then, the amphiphilic block copolymer of polystyrene-b-poly(acrylic acid) (PSt-b-PAA) has been prepared by hydrolysis of PSt-b-PBA, and copolymers of PSt-b-PAA with longer PSt blocks and shorter PAA blocks were obtained by controlling the conditions of ATRP polymerization. The reversed micelle solution of PSt-b-PAA in toluene was prepared by using the single-solvent dissolving method, and the reverse micellization behavior of PSt-b-PAA in toluene was mainly investigated in this paper. The fluorescent probe technique was used by using polar fluorescence compound N-(1-Naphthyl)ethylenediamine dihydrochloride (NEAH) as a polar fluorescent probe to study the reverse micellization behavior of PSt-b-PAA. It was found that the reverse micellization behaviors of PSt-b-PAA in toluene can be clearly revealed by using NEAH as a polar fluorescence probe, and the critical micelle concentrations (cmcs) can be well displayed. The experimental results showed that the self-assembling behavior of PSt-b-PAA in toluene depends apparently on the microstructure of the macromolecules and is also influenced by the temperature. For the copolymers of PSt-b-PAA with the same length of hydrophobic PSt blocks, the copolymer with a longer hydrophilic block PAA has lower cmc, and at higher temperature, the copolymer has lower cmc.     

Facile synthesis of graft copolymers containing rigid poly(dialkyl fumarate) branches by macromonomer method

Graft copolymers show microphase separated structure as seen in block copolymers and have lower intrinsic viscosity than block copolymers because of a branching structure. Therefore, considering molding processability, especially for polymers containing rigid segments, graft copolymers are useful architectures. In this work, graft copolymers containing rigid poly(diisopropyl fumarate) (PDiPF) branches were synthesized by full free‐radical polymerization process. First, synthesis of PDiPF macromonomers by addition‐fragmentation chain transfer (AFCT) was investigated. 2,2‐Dimethyl‐4‐methylene‐pentanedioic acid dimethyl ester was found to be an efficient AFCT agent for diisopropyl fumarate (DiPF) polymerization because of the suppression of undesired primary radical termination, which significantly took place when common AFCT agent, methyl 2‐(bromomethyl)acrylate, was used. Copolymerization of PDiPF macromonomer with ethyl acrylate accomplished the generation of the graft copolymer having flexible poly(ethyl acrylate) backbone and rigid PDiPF branches. The graft copolymer showed a microphase separated structure, high transparency, and characteristic thermal properties to PDiPF and poly(ethyl acrylate). © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2474–2480     

Synthesis of amphiphilic poly(methyl methacrylate‐ b‐ethylene oxide) copolymers from monohydroxy telechelic poly(methyl methacrylate) as macroinitiator

The synthesis of well‐defined poly(methyl methacrylate)‐block‐poly(ethylene oxide) (PMMA‐b‐PEO) dibock copolymer through anionic polymerization using monohydroxy telechelic PMMA as macroinitiator is described. Living anionic polymerization of methyl methacrylate was performed using initiators derived from the adduct of diphenylethylene and a suitable alkyllithium, either of which contains a hydroxyl group protected with tert‐butyldimethylsilyl moiety in tetrahydrofuran (THF) at ?78 °C in the presence of LiClO₄. The synthesized telechelic PMMAs had good control of molecular weight with narrow molecular weight distribution (MWD). The ¹H NMR and MALDI‐TOF MS analysis confirmed quantitative functionalization of chain‐ends. Block copolymerization of ethylene oxide was carried out using the terminal hydroxyl group of PMMA as initiator in the presence of potassium counter ion in THF at 35 °C. The PMMA‐b‐PEO diblock copolymers had moderate control of molecular weight with narrow MWD. The ¹H NMR results confirm the absence of trans‐esterification reaction of propagating PEO anions onto the ester pendants of PMMA. The micellation behavior of PMMA‐b‐PEO diblock copolymer was examined in water using ¹H NMR and dynamic light scattering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2132–2144, 2008     

Polystyrene‐graft‐poly(ethylene oxide) copolymers prepared by macromonomer technique in dispersion. I. Liquid chromatographic separation of product mixtures

Products of the radical dispersion copolymerization of methacryloyl‐terminated poly(ethylene oxide) (PEO) macromonomer and styrene were separated and characterized by size exclusion chromatography (SEC), full adsorption‐desorption (FAD)/SEC coupling and eluent gradient liquid adsorption chromatography (LAC). In dimethylformamide, which is a good solvent for PEO side chains but a poor solvent for polystyrene (PS), amphiphilic PS‐graft‐PEO copolymers formed aggregates, which were very stable at room temperature even upon substantial dilution. The aggregates disappeared at high temperature or in tetrahydrofuran (THF), which is a good solvent for both homopolymers and for PS‐graft‐PEO. FAD/SEC procedure allowed separation of homo‐PS from graft‐copolymer and determination of both its amount and molar mass. Effective molar mass of graft‐copolymer was estimated directly from the SEC calibration curve determined with PS standards. Presence of larger amount of the homo‐PS in the final graft‐copolymer products was also confirmed with LAC measurements. The results indicate that there are at least two or maybe three polymerization loci; namely the continuous phase, the particle surface layer and the particle core. The graft copolymers are produced mainly in the continuous phase while PS or copolymer rich in styrene units is formed mostly in the core of monomer‐swollen particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2284–2291, 2000     

Syntheses of graft and star copolymers possessing polyolefin branches by using polyolefin macromonomer

Graft and star copolymers having poly(methacrylate) backbone and ethylene–propylene random copolymer (EPR) branches were successfully synthesized by radical copolymerization of an EPR macromonomer with methyl methacrylate (MMA). EPR macromonomers were prepared by sequential functionalization of vinylidene chain‐end group in EPR via hydroalumination, oxidation, and esterification reactions. Their copolymerizations with MMA were carried out with monofunctional and tetrafunctional initiators by atom transfer radical polymerization (ATRP). Gel‐permeation chromatography and NMR analyses confirmed that poly(methyl methacrylate) (PMMA)‐g‐EPR graft copolymers and four‐arm (PMMA‐g‐EPR) star copolymers could be synthesized by controlling EPR contents in a range of 8.6–38.1 wt % and EPR branch numbers in a range of 1–14 branches. Transmission electron microscopy of these copolymers demonstrated well‐dispersed morphologies between PMMA and EPR, which could be controlled by the dispersion of both segments in the range between 10 nm and less than 1 nm. Moreover, the differentiated thermal properties of these copolymers were demonstrated by differential scanning calorimetry analysis. On the other hand, the copolymerization of EPR macromonomer with MMA by conventional free radical polymerization with 2,2′‐azobis(isobutyronitrile) also gave PMMA‐g‐EPR graft copolymers. However, their morphology and thermal property remarkably differed from those of the graft copolymers obtained by ATRP. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5103–5118, 2005     

Complex,degradable polyester materials via ketoxime ether‐based functionalization: Amphiphilic,multifunctional graft copolymers and their resulting solution‐state aggregates

Degradable, amphiphilic graft copolymers of poly(ε‐caprolactone)‐graft‐poly(ethylene oxide), PCL‐g‐PEO, were synthesized via a grafting onto strategy taking advantage of the ketones presented along the backbone of the statistical copolymer poly(ε‐caprolactone)‐co‐(2‐oxepane‐1,5‐dione), (PCL‐co‐OPD). Through the formation of stable ketoxime ether linkages, 3 kDa PEO grafts and p‐methoxybenzyl side chains were incorporated onto the polyester backbone with a high degree of fidelity and efficiency, as verified by NMR spectroscopies and GPC analysis (90% grafting efficiency in some cases). The resulting block graft copolymers displayed significant thermal differences, specifically a depression in the observed melting transition temperature, T_m, in comparison with the parent PCL and PEO polymers. These amphiphilic block graft copolymers undergo self‐assembly in aqueous solution with the P(CL‐co‐OPD‐co‐(OPD‐g‐PEO)) polymer forming spherical micelles and a P(CL‐co‐OPD‐co‐(OPD‐g‐PEO)‐co‐(OPD‐g‐pMeOBn)) forming cylindrical or rod‐like micelles, as observed by transmission electron microscopy and atomic force microscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3553–3563, 2010     

Titanium‐mediated [CpTiCl2(OEt)] ring‐opening polymerization of lactides: A novel route to well‐defined polylactide‐based complex macromolecular architectures

Among three cyclopentadienyl titanium complexes studied, CpTiCl₂(OEt), containing a 5% excess CpTiCl₃, has proven to be a very efficient catalyst for the ring‐opening polymerization (ROP) of L ‐lactide (LLA) in toluene at 130 °C. Kinetic studies revealed that the polymerization yield (up to 100%) and the molecular weight increase linearly with time, leading to well‐defined PLLA with narrow molecular weight distributions (M_w/M_n ≤ 1.1). Based on the above results, PS‐b‐PLLA, PI‐b‐PLLA, PEO‐b‐PLLA block copolymers, and a PS‐b‐PI‐b‐PLLA triblock terpolymer were synthesized. The synthetic strategy involved: (a) the preparation of OH‐end‐functionalized homopolymers or diblock copolymers by anionic polymerization, (b) the reaction of the OH‐functionalized polymers with CpTiCl₃ to give the corresponding Ti‐macrocatalyst, and (c) the ROP of LLA to afford the final block copolymers. PMMA‐g‐PLLA [PMMA: poly(methyl methacrylate)] was also synthesized by: (a) the reaction of CpTiCl₃ with 2‐hydroxy ethyl methacrylate, HEMA, to give the Ti‐HEMA‐catalyst, (b) the ROP of LLA to afford a PLLA methacrylic‐macromonomer, and (c) the copolymerization (conventional and ATRP) of the macromonomer with MMA to afford the final graft copolymer. Intermediate and final products were characterized by NMR spectroscopy and size exclusion chromatography, equipped with refractive index and two‐angle laser light scattering detectors. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1092–1103, 2010     

ABA triblock copolymers from two mechanistic techniques: Polycondensation and atom transfer radical polymerization

ABA triblock copolymers were synthesized using two polymerization techniques, polycondensation, and atom transfer radical polymerization (ATRP). A telechelic polymer was synthesized via polycondensation, which was then functionalized into a difunctional ATRP initiator. Under ATRP conditions, outer blocks were polymerized to form the ABA triblock copolymer. Six types of samples were prepared based on a poly(ether ether ketone) or poly(arylene ether sulfone) center block with either poly(methyl methacrylate), poly(pentafluorostyrene), or poly(ionic liquid) outer blocks. As polycondensation results in polymers with broad molecular weight distribution (MWD), the center of these triblock copolymers are disperse, while the outside blocks have narrow MWD due to the control afforded from ATRP. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 228–238     

Synthesis of Amphiphilic ABC Triblock Copolymers with PEO as the Middle Block

Summary: Stepwise anionic polymerization, catalytic hydrogenation, and atom transfer radical polymerization were performed to synthesize an amphiphilic ABC triblock copolymer, poly(ethylene‐alt‐propylene)‐block‐poly(ethylene oxide)‐block‐poly(hexyl methacrylate) (PEP‐b‐PEO‐b‐PHMA), with hydrophilic PEO as the middle block. The resulting block copolymers have well‐defined molecular weights and narrow molecular weight distributions as revealed by ¹H NMR spectroscopy and gel permeation chromatography.

GPC chromatograms of an ABC triblock copolymer, PEP‐b‐PEO‐b‐PHMA, and its intermediate precursors exhibiting narrow polydispersities.     

Thermoresponsive NIPAM block copolymers containing densely grafted poly(vinyl ether) brushes synthesized by a combination of living cationic polymerization and RAFT polymerization

Diblock copolymers consisting of a multibranched polymethacrylate segment with densely grafted poly[2‐(2‐methoxyethoxy)ethyl vinyl ether] pendants and a poly(N‐isopropylacrylamide) segment were synthesized by a combination of living cationic polymerization and RAFT polymerization. A macromonomer having both a poly[2‐(2‐methoxyethoxy)ethyl vinyl ether] backbone and a terminal methacryloyl group was synthesized by living cationic polymerization. The sequential RAFT copolymerizations of the macromonomer and N‐isopropylacrylamide in this order were performed in aqueous media employing 4‐cyanopentanoic acid dithiobenzoate as a chain transfer agent and 4,4′‐azobis(4‐cyanopentanoic acid) as an initiator. The obtained diblock copolymers possessed relatively narrow molecular weight distributions and controlled molecular weights. The thermoresponsive properties of these polymers were investigated. Upon heating, the aqueous solutions of the diblock copolymers exhibited two‐stage thermoresponsive properties denoted by the appearance of two cloud points, indicating that the densely grafted poly[2‐(2‐methoxyethoxy)ethyl vinyl ether] pendants and the poly(N‐isopropylacrylamide) segments independently responded to temperature. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013