Electrorheological property and microstructure of acetamide-modified TiO<Subscript>2</Subscript> nanoparticles

A sol–gel method has been proposed to prepare uniform TiO₂ nanoparticles whose average size is about 30 nm. The prepared nanometer TiO₂ particles are modified by acetamide via different self-assembled processes. X-ray diffraction analyses, scanning electron microscopy, and Fourier transform infrared spectrometry are used to determine the structure of the nanoparticles. The results indicate that the different synthesis processes do not change the morphology of the TiO₂/acetamide nanoparticles; nevertheless, they affect the interaction between amide and acetamide. The electrorheological (ER) activity is studied by shear stress under DC electric field. The acetamide-modified TiO₂ ER fluid shows notable ER activity with shear stress about 45 kPa (at 5 kV/mm), which outclasses the shear stress (2 kPa) of unmodified TiO₂ ER fluid. It is also found that the ER effect is very sensitive to the interaction of molecules on TiO₂ particles. The chemical bond between core and shell can enhance the ER activity of the sample.     

Metal and Metal Oxide Nanostructures Prepared by Electrical Arc Discharge Method in Liquids

In this review, the importance of electrical arc discharge technique in liquids in synthesis of various nanostructures from carbon based materials to metal and metal oxide nanostructures with their general and specific properties, especially the photocatalytic performance of metal oxide nanostructures is studied. The effect of arc current on size distribution, morphology and physicochemical properties of metal and semiconductor nanostructures was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray photoelectron spectroscopy (XPS) and UV–Vis spectroscopy. WO₃ Cubic nanostructures with 30 nm mean particle size were formed during the discharge process in water. Discharge between zinc electrodes in water leads to formation of rod like and semi spherical ZnO nanostructures with 15–20 nm diameter range. ZrO₂ nanoparticles were formed using zirconium electrodes in water. Photodegradation of Rhodamine B (Rh. B) shows that the as prepared nanostructures in this method have potential ability for environmental purifications. Also, using silver electrodes in water leads to formation of silver nanoparticles with 8–15 nm average particle size. Moreover, a novel method for synthesis of gold nanoparticles without using gold electrodes is presented. Finally, the future outlook of this technique in synthesis of various nanocrystalline materials is presented.     

Nanosized TiO<Subscript>2</Subscript> particles decorated on SiO<Subscript>2</Subscript> spheres (TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript>): synthesis and photocatalytic activities

Nanosized TiO₂ and nano-anatase TiO₂ decorated on SiO₂ spherical core shells were synthesized by using a sol–gel method. The synthesized pure TiO₂ nano particle and TiO₂ grafted on SiO₂ sphere with various ratios have been characterized for their structure and morphologies by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrophotometry (FTIR) and transmission electron microscopy (TEM). Their surface areas were measured using the BET method. The photocatalytic activity of all nanocomposites was investigated using methylene blue as a model pollutant. The synthesized TiO₂/SiO₂ particles appeared to be more efficient in the degradation of methylene blue pollutant, as compared to pure TiO₂ particles.     

Preparation and photocatalytic activity of TiO<Subscript>2</Subscript> films with Ni nanoparticles

Titania thin films were synthesized by sol–gel dip-coating method with metallic Ni nanoparticles synthesized separately from an organometallic precursor Ni(COD)₂ (COD = cycloocta-1,5-diene) in presence of 1,3-diaminopropane as a stabilizer. Titania was obtained from a titanium isopropoxide precursor solution in presence of acetic acid. A Ni/TiO₂ sol system was used to coat glass substrate spheres (6, 4 and 3 mm diameter sizes), and further heat treatment at 400 °C was carried out to promote the crystallization of titania. XRD analysis of the TiO₂ films revealed the crystallization of the anatase phase. Transmission Electron Microscopy (TEM) and High Resolution TEM studies of Ni nanoparticles before mixing with the TiO₂ solution revealed the formation of Ni nanostructures with an average size of 5–10 nm. High-angle annular dark-field images of the Ni/TiO₂ system revealed well-dispersed Ni nanoparticles supported on TiO₂ and confirmed by AFM analysis. The photocatalytic activity of the Ni/TiO₂ films was evaluated in hydrogen evolution from the decomposition of ethanol using a mercury lamp for UV light irradiation. Titania films in presence of Ni nanoparticles show higher efficiency in their photocatalytic properties in comparison with TiO₂.     

DSC investigation of nanocrystalline TiO<Subscript>2</Subscript> powder

The aim of the article is to investigate the influence of particle size on titanium dioxide phase transformations. Nanocrystalline titanium dioxide powder was obtained through a hydrothermal procedure in an aqueous media at high pressure (in the range 25–100 atm) and low temperature (≤200 °C). The as-prepared samples were characterized with respect to their composition by ICP (inductive coupled plasma), structure and morphology by XRD (X-ray diffraction), and TEM (transmission electron microscopy), thermal behavior by TG (thermogravimetry) coupled with DSC (differential scanning calorimetry). Thermal behavior of nanostructured TiO₂ was compared with three commercial TiO₂ samples. The sequence of brookite–anatase–rutile phase transformation in TiO₂ samples was investigated. The heat capacity of anatase and rutile in a large temperature range are reported.     

Synthesis and characterization of TiO<Subscript>2</Subscript>-montmorillonite nanocomposites and their photocatalytic activity

TiO₂ nanoparticles have been synthesized on the surface of exfoliated montmorillonite at a low temperature in benzyl alcohol medium. According to X-ray diffraction (XRD), N₂ adsorption-desorption isotherm and transmisson electron microscopy (TEM), it was found that the intercalation of TiO₂ nanoparticles destroyed the ordered structure of montmorillonite to some extent, and the crystallites of the nanocomposites are assembled to form a house-of-cards structure. The size of the nanoparticles in the interlamellar space is about 4 nm. The nanocomposites exhibited excellent photocatalytic activity in methylene blue degradation due to the synergetic effect of the adsorptive ability to organic compound of cetyl trimethylammonium bromide—montmorillonite and the catalytic ability of TiO₂ nanoparticles in it.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Influence of pH on the incorporation and growth of Pb<Subscript>2</Subscript>CrO<Subscript>5</Subscript> crystallites in silica matrix

Pb₂CrO₅ nanoparticles were embedded in an amorphous SiO₂ matrix by the sol–gel process. The pH and heat treatment effects were evaluated in terms of structural, microstructural and optical properties from Pb₂CrO₅/SiO₂ compounds. X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM), energy dispersive spectroscopy (EDS), and diffuse reflectance techniques were employed. Kubelka–Munk theory was used to calculate diffuse reflectance spectra that were compared to the experimental results. Finally, colorimetric coordinates of the Pb₂CrO₅/SiO₂ compounds were shown and discussed. In general, an acid pH initially dissolves Pb₂CrO₅ nanoparticles and following heat treatment at 600 °C crystallized into PbCrO₄ composition with grain size around 6 nm in SiO₂ matrix. No Pb₂CrO₅ solubilization was observed for basic pH. These nanoparticles were incorporated in silica matrix showing a variety of color ranging from yellow to orange.     

Characterization of NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles synthesized by various methods

Microwave-induced combustion with glycine, CTAB-assisted hydrothermal process with NaOH and NH3, EDTA assisted-hydrothermal methods have been applied to prepare NiFe₂O₄ nanoparticles for the first time. Structural and magnetic properties of the products were investigated by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmison electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and electron spin resonance spectrometry (EPR). TEM measurements showed that morphology of the product depends on the synthesis method employed. The average cystallite size of NiFe₂O₄ nanoparticles was in the range of 14–59 nm as measured by XRD. The uncoated sample (Method A) had an EPR linewidth of 1973 Oe, the coated samples reached lower values. The magnetic dipolar interactions existing among the Ni ferrite nanoparticles are reduced by the coatings, which could cause the decrease in the linewidth of the EPR signals. Additionally, the linewidth increases with an increase in the size and the size distribution of nanoparticles.     

Synthesis of Nanocrystalline TiO<Subscript>2</Subscript> Particles and Their Structural Characteristics

Controlled nanosized TiO₂ particles of 4–10 nm were synthesized by a simple hydrolysis method followed by calcination at different temperatures. These particles were investigated using X-ray diffraction (XRD), Photoacoustic/Fourier transform infrared (PA/FTIR) spectroscopy, Raman spectroscopy and electron spin resonance (ESR) spectroscopy to understand their structural properties. X-ray diffraction studies confirmed the anatase phase of the particles where as the PA/FTIR revealed the bands around 1,500 and 3,300 cm⁻¹ due to –OH bands. ESR spectroscopic investigations carried out from 5 to 300 K indicated the presence of an ESR line at g = 2.00 emerging from radical species. It is significant to note that the intensity of the ESR line decreased as the particle size increased.     

Preparation of nanocrystalline Fe-doped TiO<Subscript>2</Subscript> powders as a visible-light-responsive photocatalyst

Nanocrystalline Fe-doped TiO₂ powders were prepared using TiOSO₄, urea, and Fe(NO₃)₃ · 9H₂O as precursors through a hydrothermal method. The as-synthesized yellowish-colored powders are composed of anatase TiO₂, identified by X-ray diffraction (XRD). The grain size ranged from 9.7 to 12.1 nm, calculated by Scherrer’s method. The specific surface area ranged from 141 to 170 m²/g, obtained by the Brunauer–Emmett–Teller (BET) method. The transmission electron microscopy (TEM) micrograph of the sample shows that the diameter of the grains is uniformly distributed at about 10 nm, which is consistent with that calculated by Scherrer’s method. Fe³⁺ and Fe²⁺ have been detected on the surface of TiO₂ powders by X-ray photoelectron spectroscopy (XPS). The UV–Vis diffuse reflection spectra indicate that the light absorption thresholds of the Fe-doped TiO₂ powders have been red-shifted into the visible light region. The photocatalytic activity of the Fe-doped TiO₂ was evaluated through the degradation of methylene blue (MB) under visible light irradiation. The Fe-doped TiO₂ powders have shown good visible-light photocatalytic activities and the maximum degradation ratio is achieved within 4.5 h.     

Silver Nanoparticles Filling in TiO2 Hollow Nanofibers by Coaxial Electrospinning

This study investigated the coaxial electrospinning process of silver filling in TiO₂ ultrafine hollow fibers using polyvinyl pyrrolidone (PVP) sol/titanium n-butyloxide (Ti(OC₄H₉)₄) and PVP sol/silver nanoparticles as pore-directing agents. The bicomponent fibers were heat treated at 200 °C and calcined at 600 °C. Silver particles having diameters of 5 to 40 nm were deposited on the inner surface of the long hollow TiO₂ nanofibers (outer diameter of 150.300 nm) with mesoporous walls (thickness of 10.20 nm). The morphological structure of the filled ultrafine hollow fibers has been studied by means of infrared (IR) spectrum, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The diameters and wall thicknesses of the hollow fibers could be tuned by adjusting the electrospinning parameters. Compared with other nanostructured TiO₂ materials, such as mesoporous Ag-TiO₂ blending fibers, TiO₂ hollow nanofibers, TiO₂ nanofibers, and TiO₂ powders, the silver filled TiO₂ hollow fibers exhibited a higher photocatalytic activity toward the degradation of methylene blue.     

Synthesis and characterization of radiation sensitive TiO<Subscript>2</Subscript>/monazite photocatalyst

A TiO₂/monazite photocatalyst was prepared by embedding TiO₂ nanoparticles into a monazite substrate surface. TiCl₄ hydrolysis/citric acid chelating procedure under acidic conditions were used to synthesize the nanophase TiO₂ particles. The anatase TiO₂/monazite photocatalyst surface area, morphology, crystalline and elemental concentrations were characterized using Brunauer-Emmett-Teller (BET) method, scanning electron microscopy (SEM), X-ray diffraction (XRD), and inductively coupled plasma-atomic emission spectrometry (ICP-AES). Monazite contains a large amount of Ce-, La-, Nd- and Th-PO₄ compounds; it has been known as a natural mineral material with minor radioactivity. TiO₂-CeO₂ composite is a kind of radiation sensitive photocatalyst in which the radiations of thorium nuclides give energy to trigger TiO₂ and cerium ions which play an energy absorber with charge separator. The result showed that methylene blue and phenol were spontaneously photocatalytic decomposed by TiO₂/monazite composite even in a dark environment. A synergistic effect was also examined with applied exterior UV or ⁶⁰Co irradiation. A hybrid mechanism is proposed; according by the radioluminescence (RL) from excited Ce ion by γ-radiation soliciting CeO₂/TiO₂ heterojunction (HJ). This seems to be a possible mechanism to explain this self-activated photo-catalytic behavior.     

Preparation of Cd-doped SnO<Subscript>2</Subscript> nanoparticles by sol–gel route and their optical properties

Nanocrystalline cadmium doped tin oxide (SnO₂) powders of about 2.5–4.5 nm in size have been synthesized by using different solvents via sol–gel method. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Energy dispersive X-ray analysis (EDX), Transmission electron spectroscopy (TEM), UV-Vis absorption and Photoluminescence (PL) spectroscopy. The PL emission spectra revealed that the band centered at 452 nm might be related with oxygen vacancies. A spherical, small rod and slice like morphologies of the prepared Cd-SnO₂ nanoparticles were observed in the SEM and TEM studies. The presence of Cd modifies the structural, morphological and optical properties of the tin oxide nanoparticles.     

Sustainable fabrication of silver-titania nanocomposites using goji berry (Lycium barbarum L.) fruit extract and their photocatalytic and antibacterial applications

Silver-titania nanocomposites (Ag-TiO₂ NCs) have unique functional attributes due to their photocatalytic and antibacterial properties. In this study, titania nanoparticles (TiO₂-NPs) were successfully in-situ decorated with silver nanoparticles (Ag-NPs) using the aqueous extract of goji berries (Lycium barbarum L.) as a bioreducing and stabilizing agent. Different Ag-TiO₂ NCs were synthesized by treating different concentrations of silver nitrate with a specific concentration of TiO₂-NPs in the presence of fruit extract. The green-synthesized NCs were characterized using several techniques viz., ultraviolet–visible spectrophotometry, X-ray diffractometry (XRD), scanning electron microscopy, field-emission transmission electron microscopy (FE-TEM), Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. XRD analysis revealed the formation of face-centered cubic (fcc) crystals, and FE-TEM analysis revealed the embedment of Ag-NPs throughout the surface of TiO₂-NPs. The average size of Ag-NPs on TiO₂-NPs increased from 11.2 ± 3.05 nm to 16.4 ± 4.5 nm with an increase in the concentration of silver ions, and the morphology of Ag-NPs was predominantly quasi-spherical and hexagonal. These NCs exhibited an excellent photocatalytic degradation of an azo dye, methylene blue (MB). The synthesized Ag-TiO₂ NCs (3:1) showed higher photocatalytic degradation efficiency of ∼ 93.4% for MB in 130 min under visible light irradiation. Ag-TiO₂ NC_S also exhibited good antibacterial activities towards Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). Therefore, the formation of Ag-NPs on the surface of TiO₂-NPs to form Ag-TiO₂ NCs exhibits eco-friendly photocatalytic degradation of azo dye contaminants as well as antibacterial activity.     

Sol-gel preparation and spectroscopic study of the pyrophanite MnTiO<Subscript>3</Subscript> nanoparticles

The nanosized xerogel of titanium dioxide (TiO₂) and manganese oxides (MnO₂, Mn₂O₃, Mn₃O₄) was prepared by the sol-gel method using manganese chloride (MnCl₂·4H₂O) and titanium isopropoxide (Ti(O-iPr)₄) as precursors in cetyltrimethylammonium bromide (CTAB)/ ethanol/H₂O/HCl micelle solutions, following the calcinations of the produced powders at difference temperatures. The nanostructure and phase composition of these nanoparticles were characterized with X-ray powder diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS). The spectroscopic characterizations of these nanoparticles were also done with UV-Vis spectroscopy and laser Raman spectroscopy (LRS). XRD patterns show that the pyrophanite MnTiO₃ phase was formed at the calcinations temperature of 900°C. The TEM images show that the nanoparticles are almost spherical or slight ellipose and the sizes are 50 nm on average. The UV-Vis spectra show that the nanosized MnTiO₃ have significant absorption bands in the visible region. There are new absorption peaks of MnTiO₃ nanoparticles in LRS compared with the pure TiO₂ powder.     

Metamagnetic DyAlO<Subscript>3</Subscript> nanoparticles with very low magnetic moment

Nanocrystalline dysprosium monoaluminate (DyAlO₃) has been synthesized by modified sol–gel method after sintering the precursor gel at 950 °C. The micro-structural features have been verified by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy. The XRD pattern confirms the formation of single-phase DyAlO₃; the average size of the nanoparticles is 50 nm. X-Ray photoelectron spectroscopy has been used to study the chemical composition and bonding in the samples. The binding energies of core-level electrons in Dy, Al and O in DyAlO₃ nanopowder have been found slightly shifted compared to the respective values of the same elements. Both AC and DC magnetic susceptibilities have been measured in the temperature range 2–300 K. Unusually low effective magnetic moment of Dy³⁺, μ_eff = 0.38, has been derived from the inverse magnetic susceptibility–temperature plot between 4 and 252 K. The Nèel temperature, T_N = 3.920 K and exchange interaction constant J/k = −1.74 K, have been also determined.     

Sol-gel preparation and characterization of Co/TiO<Subscript>2</Subscript> nanoparticles: Application to the degradation of methyl orange

Cobalt doped titania nanoparticles were synthesized by sol-gel method using titanium(IV) isopropoxide and cobalt nitrate as precursors. X-Ray diffraction (XRD) results showed that titania and Co/TiO₂ nanoparticles only include anatase phase. The framework substitution of Co in TiO₂ nanoparticles was established by XRD, scanning electron microscopy equipped with energy dispersive X-ray microanalysis (SEM-EDX) and Fourier transform infrared (FT-IR) techniques. Transmission electron microscopy (TEM) images confirmed the nanocrystalline nature of Co/TiO₂. The increase of cobalt doping enhanced “red-shift” in the UV-Vis absorption spectra. The dopant suppresses the growth of TiO₂ grains, agglomerates them and shifts the band absorption of TiO₂ from ultraviolet (UV) to visible region. The photocatalytic activity of samples was tested for degradation of methyl orange (MO) solutions. Although the photocatalytic activity of undoped TiO₂ was found to be higher than that of Co/TiO₂ under UV irradiation, the presence of 0.5% Co dopant in TiO₂ resulted in a catalyst with the highest activity under visible irradiation.     

The Preparation and Properties of Polyurethane/Nano-CeO<Subscript>2</Subscript> Hybrid Aqueous Coating

To improve the ultraviolet resistance and thermal stability of waterborne polyurethane, stable waterborne polyurethane/nano-cerium oxide hybrid dispersions were obtained by adding nano-cerium colloids to previously synthesized waterborne polyurethane dispersions. The dried ceria colloid was characterized by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). The XRD results indicated the prepared CeO₂ was a face-centered cubic structure. The prepared polyurethane/CeO₂ dispersions were studied by dynamic light scattering (DLS), transmission electron microscopy (TEM), UV–Vis spectroscopy and accelerated weathering test. The dried polyurethane/CeO₂ films were characterized using thermogravimetric analysis (TGA). The DLS analysis indicated the particles average diameter of hybrids emulsion was bigger than that of the pure waterborne polyurethane dispersion. TG analysis and accelerated weathering test suggested the hybrid latex films had better thermal stability and mechanical properties than those of the pure waterborne polyurethane. The UV–Vis absorption capacity of the dispersions prepared was increasing with the amount of CeO₂ colloid increased.     

Electrospinning fabrication of mesoporous nano Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript>@activated carbon fiber membrane for hybrid removal of phenol from waste water

A mesoporous iron–titanium mixed-oxides@activated carbon(AC) fiber membrane was fabricated by an electrospinning method and applied to the treatment of phenol waste water. The physical and chemical properties of the composite fiber membrane were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N2 adsorption/desorption, UV–Vis light diffuse reflectance spectroscopy (DRS), Raman spectroscopy, respectively. The results indicate that the composite nanofiber membrane is composed of α-Fe₂O₃, anatase TiO₂ and activated carbon phases with a specific surface area of 231 m² g^–1 and narrow pore size distribution of 3–6 nm. DRS reveals that the composite membrane has high photons absorption from both ultraviolet light and visible light irradiation owing to the combination of Fe₂O₃, TiO₂ and carbon. The prepared nano Fe₂O₃–TiO₂@AC fiber membrane can act as an efficient reusable photocatalyst and adsorbent for 100% remo val of phenol pollutant. This hybrid technique is hopeful to be widely used in the treatment of various organic waste waters.