压电压磁复合材料中裂纹对反平面简谐弹性波的散射问题

分析了压电压磁复合材料中裂纹对反平面简谐弹性波的散射问题。利用傅立叶变换,使问题的求解转换为对一对以裂纹表面上的位移差为未知变量的对偶积分方程的求解。为了求解对偶积分方程,把裂纹面上的位移差展开为雅可比多项式形式,进而得到了裂纹长度、入射波波速及入射波频率对裂纹应力强度因子的影响。从数值结果可以看出,压电压磁复合材料中可导通裂纹的反平面问题的动应力奇异性与一般弹性材料中的反平面断裂问题动应力奇异性相同。     

Basic solution of two parallel mode-I permeable cracks in functionally graded piezoelectric materials

The basic solution of two parallel mode-I permeable cracks in functionally graded piezoelectric materials was studied in this paper using the generalized Almansi’s theorem. To make the analysis tractable, it was assumed that the shear modulus varies exponentially along the horizontal axis parallel to the crack. The problem was formulated through a Fourier transform into two pairs of dual integral equations, in which unknown variables are jumps of displacements across the crack surface. To solve the dual integral equations, the jumps of displacements across the crack surfaces were directly expanded as a series of Jacobi polynomials. The solution of the present paper shows that the singular stresses and the singular electric displacements at the crack tips in functionally graded piezoelectric materials carry the same forms as those in homogeneous piezoelectric materials; however, the magnitudes of intensity factors depend on the gradient of functionally graded piezoelectric material properties. It was also revealed that the crack shielding effect is also present in functionally graded piezoelectric materials.     

Scattering of harmonic anti-plane shear waves by an interface crack in magneto-electro-elastic composites

IntroductionCompositematerialconsistingofapiezoelectricphaseandapiezomagneticphasehasdrawnsignificantinterestinrecentyears,duetotherapiddevelopmentinadaptivematerialsystems .Itshowsaremarkablylargemagnetoelectriccoefficient,thecouplingcoefficientbetweenst…     

DYNAMIC BEHAVIOR OF TWO PARALLEL SYMMETRY CRACKS IN MAGNETO-ELECTRO-ELASTIC COMPOSITES UNDER HARMONIC ANTI-PLANE WAVES

The dynamic behavior of two parallel symmetry cracks in magneto-electro-elastic composites under harmonic anti-plane shear waves is studied by Schmidt method. By using the Fourier transform, the problem can be solved with a pair of dual integral equations in which the unknown variable is the jumps of the displacements across the crack surfaces. To solve the dual integral equations, the jumps of the displacements across the crack surface were expanded in a series of Jacobi polynomials. The relations among the electric filed, the magnetic flux and the stress field were obtained. From the results, it can be obtained that the singular stresses in piezoelectric/piezomagnetic materials carry the same forms as those in a general elastic material for the dynamic anti-plane shear fracture problem. The shielding effect of two parallel cracks was also discussed.     

The interaction of two parallel Mode-I limited-permeable cracks in a functionally graded piezoelectric material

In this paper, the interaction of two parallel Mode-I limited-permeable cracks in a functionally graded piezoelectric material was investigated by using the generalized Almansi's theorem. In the analysis, the electric permittivity of the air inside the crack was considered. The problem was formulated through Fourier transform into two pairs of dual integral equations, in which unknown variables are jumps of displacements across the crack surface. To solve the dual integral equations, the jumps of displacements across the crack surfaces were directly expanded as a series of Jacobi polynomials. The solution of the present paper shows that the singular stresses and the singular electric displacements at the crack tips in functionally graded piezoelectric materials carry the same forms as those in homogeneous piezoelectric materials; however, the magnitudes of intensity factors depend on the electric permittivity of the air inside the crack and the gradient parameter of functionally graded piezoelectric material properties. It was also revealed that the crack shielding effect is also present in functionally graded piezoelectric materials.     

INVESTIGATION OF ANTI-PLANE SHEAR BEHAVIOR OF TWO COLLINEAR CRACKS IN PIEZOELECTRIC MATERIALS BY A NEW METHOD

In this paper, the interaction between two collinear cracks in piezoelectric materials under anti-plane shear loading was investigated for the impermeable crack face conditions. By using the Fourier transform, the problem can be solved with two pairs of triple integral equations. These equations are solved using Schmidt's method. This process is quite different from that adopted previously. This study makes it possible to understand the two collinear cracks interaction in piezoelectric materials. The authors are grateful for financial support from the Post-Doctoral Science Foundation and the Natural Science Foundation of Heilongjiang Province.     

矩形压电体中反平面裂纹的电弹性场

基于线性压电理论,本文获得了含有中心反平面裂纹的矩形压电体中的奇异应力和电场。利用Fourier积分变换和Fourier正弦级数将电绝缘型裂纹问题化为对偶积分方程,并进一步归结为易于求解的第二类Fred-holm积分方程。获得了裂纹尖端应力、应变、电位移和电场的解析解,求得了裂纹尖端场的强度因子及能量释放率。分析了压电矩形体的几何尺寸对它们的影响。结果表明,对于电绝缘型裂纹,裂纹尖端附近的各个场变量都具有-1/2阶的奇异性,能量释放率与电荷载的方向及大小有关,并且有可能为负值。     

The closed form solution of a Mode-I crack in the piezoelectric/piezomagnetic materials

In this paper, the behavior of a Mode-I crack in the piezoelectric/piezomagnetic materials subjected to a uniform tension loading is investigated by the generalized Almansi’s theorem. Through the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations, in which the unknown variables are the jumps of the displacements across the crack surfaces. To solve the dual integral equations, the displacement jumps are directly expanded in a series of Jacobi polynomials. Then the closed form solution of this problem can be obtained.     

Indentation responses of piezoelectric films

Frictionless indentation responses of transversely isotropic piezoelectric film/rigid substrate systems under circular cylindrical indenter (i.e., punch), conical indenter (i.e., cone), and spherical indenter (i.e., sphere) are investigated. Both insulating and conducting indenters are considered. The technique of Hankel transformation is employed to derive the corresponding dual integral equations for the mixed boundary value indentation problems. For the two limiting cases of infinitely thick and infinitely thin piezoelectric films, closed-form solutions are obtained. For piezoelectric films of finite thickness, a numerical method is constructed to solve the dual integral equations and semi-empirical models having only two unknown parameters are proposed for the responses of indentation force, electric charge and electric potential, and contact radius. With the two parameters inferred from the numerical results, the semi-empirical formulae are found to provide good estimates of the indentation responses for the two limiting cases of infinitely thick and thin piezoelectric films, as well as those in between. The inferred parameters in the proposed semi-empirical formulae for normalized indentation force and electric charge are checked against four different piezoelectric materials and are found to be insensitive to the selection of piezoelectric materials. It is believed that the proposed semi-empirical indentation formulae are useful in developing experimental indentation techniques to extract the material properties of piezoelectric films.     

A 3-D rectangular permeable crack or two 3-D rectangular permeable cracks in a piezoelectric material

The solutions of a 3-D rectangular permeable crack and two 3-D rectangular permeable cracks in a piezoelectric material were investigated by using the generalized Almansi’s theorem and the Schmidt method. The problem was formulated through Fourier transform into three pairs of dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces. To solve the dual integral equations, the displacement jumps across the crack surfaces were directly expanded as a series of Jacobi polynomials. Finally, the effects of the shape of the rectangular crack and the distance between two rectangular cracks on the stress and electric displacement intensity factors in a piezoelectric material were analyzed. These results can be used for the strength and the coupling effect evaluation of cracked piezoelectric materials.     

Two parallel limited-permeable mode-I cracks or four parallel limited-permeable mode-I cracks in the piezoelectric materials

In this paper, the basic solutions of two parallel mode-I cracks or four parallel mode-I cracks in the piezoelectric materials were investigated by means of the Schmidt method for the limited-permeable electric boundary conditions. The electric permittivity of air in the crack was considered. Through the Fourier transform, the problems can be solved with the help of two pairs of dual integral equations, in which the unknown variables were the jumps of the displacements across the crack surfaces, not the dislocation density functions. To solve the dual integral equations, the jumps of the displacements across the crack surfaces were directly expanded in a series of Jacobi polynomials. Finally, the effects of the distance between two parallel cracks, the distance between two collinear cracks and the electric boundary conditions on the stress and the electric intensity factors in the piezoelectric materials are analyzed. These results can be used for the strength evaluation of the piezoelectric materials with multi-cracks. The crack shielding effect is also present in the piezoelectric materials.     

Basic solutions of a 3-D rectangular limited-permeable crack or two 3-D rectangular limited-permeable cracks in?piezoelectric materials

The solutions of a 3-D rectangular limited-permeable crack or two 3-D rectangular limited-permeable cracks in piezoelectric materials were given by using the generalized Almansi’s theorem and the Schmidt method. At the same time, the electric permittivity of the air inside the rectangular crack was considered. The problem was formulated through Fourier transform as three pairs of dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces. To solve the dual integral equations, the displacement jumps across the crack surfaces were directly expanded as a series of Jacobi polynomials. Finally, the effects of the electric permittivity of the air inside the rectangular crack,the shape of the rectangular crack and the distance between two rectangular cracks on the stress and electric displacement intensity factors in piezoelectric materials were analyzed.     

Eccentric crack in a piezoelectric strip bonded to half planes

We consider the problem of determining the singular stresses and electric fields in a piezoelectric ceramic strip containing an eccentric Griffith crack off the centre line bonded to two elastic half planes under anti-plane shear loading using the continuous crack-face condition. Fourier transforms are used to reduce the problem to the solution of two pairs of dual integral equations, which are then expressed to a Fredholm integral equation of the second kind. Numerical values on the stress intensity factor and energy release rate are obtained.     

Three-dimensional non-axisymmetric behavior of a penny shaped crack in a piezoelectric strip subjected to in-plane loads

The behavior of a penny shaped crack in a three-dimensional piezoelectric ceramic strip under non-axisymmetric in-plane normal mechanical and electrical loads is analyzed based on the continuous electric boundary conditions of the crack surface. The potential theory, Hankel transform and Fourier series are used to obtain the systems of dual integral equations, which are then expressed as Fredholm integral equations. The singular mechanical and electric fields and all mode-I field intensity factors are obtained, and the numerical values of various field intensity factors for PZT-6B piezoelectric ceramic are shown graphically for an uniform load and a pair of concentrated load, respectively.     

On anti-plane shear behavior of a Griffith permeable crack in piezoelectric materials by use of the non-local theory

In this paper, the non-local theory of elasticity is applied to obtain the behavior of a Griffith crack in the piezoelectric materials under anti-plane shear loading for permeable crack surface conditions. By means of the Fourier transform the problem can be solved with the help of a pair of dual integral equations with the unknown variable being the jump of the displacement across the crack surfaces. These equations are solved by the Schmidt method. Numerical examples are provided. Unlike the classical elasticity solutions, it is found that no stress and electric displacement singularity is present at the crack tip. The non-local elastic solutions yield a finite hoop stress at the crack tip, thus allowing for a fracture criterion based on the maximum stress hypothesis. The finite hoop stress at the crack tip depends on the crack length and the lattice parameter of the materials, respectively. The project supported by the National Natural Science Foundation of China (50232030 and 10172030)     

功能梯度压电带中裂纹对SH波的散射

研究功能梯度压电带中裂纹对SH波的散射问题,为了便于分析,材料性质假定为指数模型,并假设裂纹面上的边界条件为电渗透型的.根据压电理论得到压电体的状态方程,利用Fourier积分变换,问题转化为对偶积分方程的求解.用Copson方法求解积分方程.求得了裂纹尖端动应力强度因子、电位移强度因子的解析表达式,最后数值结果显示了标准动应力强度因子与入射波数、材料参数、带宽、波数以及入射角之间的关系.     

ELECTROELASTIC INTENSIFICATION NEAR ANTI-PLANE CRACK IN A FUNCTIONALLY GRADIENT PIEZOELECTRIC CERAMIC STRIP

Following the theory of linear piezoelectricity, we consider the electro-elastic problems of a finite crack in a functionally gradient piezoelectric ceramic strip. By the use of Fourier transforms we reduce the problem to solving two pairs of dual integral equations. The solution to the dual integral equations is then expressed in terms ofa Fredholm integral equation of the second kind. Numerical calculations are carried out for piezoelectric ceramics. The electric field intensity factors and the energy release rate are shown graphically, and the electroelastic interactions are illustrated.     

ELECTROELASTIC INTENSIFICATION NEAR ANTI-PLANE CRACK IN A FUNCTIONALLY GRADIENT PIEZOELECTRIC CERAMIC STRIP

Following the theory of linear piezoelectricity,we consider the electro-elastic prob-lems of a finite crack in a functionally gradient piezoelectric ceramic strip.By the use of Fouriertransforms we reduce the problem to solving two pairs of dual integral equations.The solution tothe dual integral equations is then expressed in terms of a Fredholm integral equation of the secondkind.Numerical calculations are carried out for piezoelectric ceramics.The electric field intensityfactors and the energy release rate are shown graphically,and the electroelastic interactions areillustrated.     

Interactions of multiple parallel symmetric permeable mode-III cracks in a piezoelectric material plane

In this paper, the interactions of multiple parallel symmetric and permeable finite length cracks in a piezoelectric material plane subjected to anti-plane shear stress loading were studied by the Schmidt method. The problem was formulated through Fourier transform into dual integral equations, in which the unknown variables are the jumps of displacements across the crack surfaces. To solve the dual integral equations, the jumps of displacements across the crack surfaces were directly expanded as a series of Jacobi polynomials. Finally, the relation between the electric field and the stress field near the crack tips was obtained. The results show that the stress and the electric displacement intensity factors at the crack tips depend on the lengths and spacing of the cracks. It is also revealed that the crack shielding effect presents in piezoelectric materials.     

Damage analysis of thermopiezoelectric properties: Part I - crack tip singularities

This is Part I of the work on a two-dimensional analysis of thermal and electric fields of a thermopiezoelectric solid damaged by cracks. It deals with finding the singular crack tip behavior for the temperature, heat flow, displacements, electric potential, stresses and electric displacements. By application of Fourier transformations and the extended Stroh formalism, the problem is reduced to a pair of dual integral equations for the temperature field with the aid of an auxiliary function. The electroelastic field is governed by another pair of dual integral equations. The inverse square root singularity is found for the heat flow field while the logarithmic singularity prevailed for the electroelastic field regardless of whether the crack lies in a homogeneous piezoelectric solid or at an interface of two dissimilar piezoelectric materials. Results are given for the energy release rate and a finite length crack oriented at an arbitrarily angle with reference to the external disturbances. Part II of this paper considers the modelling of a piezoelectric material containing microcracks. A representative cracked area element is used to obtain the effective conductivity and electroelastic modulus. Numerical results are given for a peizoelectric Bati O₃ ceramic with cracks.