Analysis of dynamic stress intensity factors of thick-walled cylinder under internal impulsive pressure

Dynamic stress intensity factors are evaluated for thick-walled cylinder with a radial edge crack under internal impulsive pressure. Firstly, the equation for stress intensity factors under static uniform pressure is used as the reference case, and then the weight function for a thick-walled cylinder containing a radial edge crack can be worked out. Secondly, the dynamic stresses in uncracked thick-walled cylinders are solved under internal impulsive pressure by using mode shape function method. The solution consists of a quasi-static solution satisfying inhomogeneous boundary conditions and a dynamic solution satisfying homogeneous boundary condi- tions, and the history and distribution of dynamic stresses in thick-walled cylinders are derived in terms of Fourier-Bessel series. Finally, the dynamic stress intensity factor equations for thick-walled cylinder containing a radial edge crack sub- jected to internal impulsive pressure are given by dynamic weight function method. The finite element method is utilized to verify the results of numerical examples, showing the validity and feasibility of the proposed method.     

Analysis of dynamic stress intensity factors of three-point bend specimen containing crack

A new formula is obtained to calculate dynamic stress intensity factors of the three-point bending specimen containing a single edge crack in this study. Firstly, the weight function for three-point bending specimen containing a single edge crack is derived from a general weight function form and two reference stress intensity factors, the coefficients of the weight function are given. Secondly, the history and distribution of dynamic stresses in uncracked three-point bending specimen are derived based on the vibration theory. Finally, the dynamic stress intensity factors equations for three-pointing specimen with a single edge crack subjected to impact loadings are obtained by the weight function method. The obtained formula is verified by the comparison with the numerical results of the finite element method (FEM). Good agreements have been achieved. The law of dynamic stress intensity factors of the three-point bending specimen under impact loadings varing with crack depths and loading rates is studied.     

Analysis of dynamic stress intensity factors of three-point bend specimen containing crack

A new formula is obtained to calculate dynamic stress intensity factors of the three-point bending specimen containing a single edge crack in this study. Firstly, the weight function for three-point bending specimen containing a single edge crack is derived from a general weight function form and two reference stress intensity factors, the coefficients of the weight function are given. Secondly, the history and distribution of dynamic stresses in uncracked three-point bending specimen are derived based on the vibration theory. Finally, the dynamic stress intensity factors equations for three-pointing specimen with a single edge crack subjected to impact loadings are obtained by the weight function method. The obtained formula is verified by the comparison with the numerical results of the finite element method (FEM). Good agreements have been achieved. The law of dynamic stress intensity factors of the three-point bending specimen under impact loadings varing with crack depths and loading rates is studied.     

Dual boundary element analysis of wave scattering from singularities

The dual boundary element method is used to obtain an efficient solution of the Helmholtz equation in the presence of geometric singularities. In particular, time-harmonic waves in a membrane which contains one or more fixed edge stringers (or cracks) are investigated. The hypersingular integral equation is used in the procedure to ensure a unique solution for the problem with a degenerate boundary. The method yields a solution for the entire membrane as well as the dynamic stress intensity factor. Numerical results are presented for a circular membrane containing a single edge stringer, two edge stringers and an internal stringer. Also, the first three critical wave numbers of the membrane with the homogeneous boundary condition are determined, and the dynamic stress intensity factors are found for problems with the nonhomogeneous boundary condition. Good agreement is found after comparing the results with exact solutions, and with results obtained using DtN-FEM and ABAQUS.     

孔边裂纹对SH波的散射及其动应力强度因子

采用Ｇｒｅｅｎ函数法研究任意有限长度的孔边裂纹对ＳＨ波的散射和裂纹尖端场动应力强度因子的求解．取含有半圆形缺口的弹性半空间水平表面上任意一点承受时间谐和的出平面线源荷载作用时位移函数的基本解作为Ｇｒｅｅｎ函数,采用裂纹“切割”方法并根据连接条件建立起问题的定解积分方程,得到动应力强度因子的封闭解答．最后给出了孔边裂纹动应力强度因子的算例和结果,并讨论了圆孔的存在对动应力强度因子的影响     

Thermal shock analyses for a strip containing an infinite row of periodically distributed cracks normal to its edge

The transient thermal stress problem of a semi-infinite plate containing an infinite row of periodically distributed cracks normal to its edge is investigated in this paper. The elastic medium is assumed to be cooled suddenly on the crack-containing edge. By the superposition principle, the formulation leads to a mixed boundary value problem, with the negating tractions arisen from the thermal stresses for a crack-free semi-infinite plate. The resulting singular integral equation is solved numerically. The effects on the stress intensity factors due to the presence of periodically distributed cracks in a semi-infinite plate are illustrated. For both the edge crack and the embedded crack arrays, the stress intensity factors increase, due to the reduction of the shielding effect, as the stacking cracks are more separated. For the case of embedded crack array, one has the further conclusion that the stress intensity factors decline as the crack array shifts from the plate edge.     

与两相材料界面接触的裂纹对SH波的散射

利用积分变换方法得出了两相材料中作用简谐集中力时的格林函数．根据所得的格林函数并利用Betti-Rayleigh互易定理得出了与界面接触裂纹的散射波场．裂纹的散射波场可分解为两部分，一部分为奇异的散射场，另一部分为有界的散射场．利用分解后的散射场，可得裂纹在SH波作用下的超奇异积分方程．根据裂纹散射场的奇异部分和Cauchy型奇异积分的性质得出了裂纹和界面接触点处的奇性应力指数和接触点角形域内的奇性应力．利用所得的奇性应力定义了裂纹和界面接触点处的动应力强度因子．对所得超奇异积分方程的数值求解可得裂纹端点和接解点处的应力强度因子。     

The Problem of an External Circular Crack Under Asymmetric Loadings

ＩｎｔｒｏｄｕｃｔｉｏｎＷｈｅｎｔｈｅｂｏｕｎｄａｒｙｉｎｔｅｇｒａｌｅｑｕａｔｉｏｎｍｅｔｈｏｄｉｓａｐｐｌｉｅｄｔｏｃｒａｃｋａｎａｌｙｓｉｓ,ｏｎｌｙｎｕｍｅｒｉｃａｌｓｏｌｕｔｉｏｎｓｃａｎｂｅｏｂｔａｉｎｅｄ ,ｓｕｃｈａｓ:ｔｈｅｔｙｐｉｃａｌｗｏｒｋｓｏｆＳｎｙｄｅｒａｎｄＣｒｕｓｅ[1],Ｃｒｏｕｃｈ[2 ],Ｂｌａｎｄｆｏｒｄｅｔａｌ.[3],Ｐｏｒｔｅｌａｅｔａｌ.[4 ],Ｂｕｉ[5 ],Ｗｅａｖｅｒ[6 ]ａｎｄＷＡＮＧｅｔａｌ.[7- 9].Ｉｔｉｓｖｅｒｙｄｉｆｆｉｃｕｌｔｔｏａｐｐｌｙｔｈｅｂｏｕｎｄａｒ…     

Deformations and stresses in annular disks made of functionally graded materials subjected to internal and/or external pressure

In this paper, an analytical solution is developed to determine deformations and stresses in circular disks made of functionally graded materials subjected to internal and/or external pressure. Taking mechanical properties of the materials of circular disks to be linear variations, the governing equation is derived from basic equations of axisymmetric, plane stress problems in elasticity. By transforming the governing equation into a hypergeometric equation, an accurate analytical solution of deformations and stresses in circular disks is obtained. The comparison with the numerical solution indicates that both approaches give very agreeable results, indicating correctness of the proposed analytical solution. The obtained analytical solution is employed to determine the radial displacement and stresses in circular disks subjected to external pressure, internal pressure, and internal and external pressure, respectively. How the radius ratio of circular disks affects deformations and stresses is also investigated.     

压电体中孔边Ⅲ型界面裂纹的动应力强度因子

采用Green函数法研究界面上含圆孔边界径向有限长度裂纹的两半无限压电材料对SH波的散射和裂纹尖端动应力强度因子问题.首先构造出具有半圆型凹陷半空间的位移Green函数和电场Green函数,然后采用裂纹"切割"方法构造孔边裂纹,并根据契合思想和界面上的连接条件建立起求解问题的定解积分方程.最后作为算例,给出了孔边界面裂纹尖端动应力强度因子的计算结果图并进行了讨论.     

爆炸载荷下板条边界斜裂纹的动态扩展行为

为了研究爆炸应力波作用下板条边界斜裂纹的动态扩展行为,首先分析了爆炸应力波在含边界斜裂纹板条中的传播,其次采用动态焦散线实验方法,进行了爆炸载荷下板条边界斜裂纹扩展规律的实验研究.研究结果表明,爆炸应力波作用下,板条试件边界斜裂纹的扩展过程中,裂纹扩展速度、扩展加速度和裂尖动态应力强度因子随时间波动变化,扩展速度最大值...     

Scattering of SH-wave by cracks originating at an elliptic hole and dynamic stress intensity factor

The method of complex function and the method of Green‘s function are used to investigate the problem of SH-wave scattering by radial cracks of any limited length along the radius originating at the boundary of an elliptical hole, and the solution of dynamicstress intensity factor at the crack tip was given. A Green‘s function was constructed for the problem, which is a basic solution of displacement field for an elastic half space containing a half elliptical gap impacted by anti-plane harmonic linear source force at any point of its horizontal boundary. With division of a crack technique, a series of integral equations can be established on the conditions of continuity and the solution of dynamic stress intensity factor can be obtained. The influence of an elliptical hole on the dynamic stress intensity factor at the crack tip was discussed.     

粘弹性双材料界面裂缝的缝端位移场及动态断裂分析

本文研究的是经常在实际工程中遇到的粘弹性双材料界面裂缝的动断裂问题.由于粘弹性自身的复杂性,使得粘弹性双材料界面裂缝缝端应力的奇异性较弹性呈现出更为复杂的形式,从而使动断裂问题的分析变得更为困难.根据此情况,本文采用复阻尼理论反映粘弹性体的运动规律,用复势理论和平面问题复变函数解答的科洛索夫公式推导了粘弹性双材料界面裂缝缝端位移场及动态应力强度因子的求解公式,利用特解边界元进行了粘弹性双域耦合动力响应计算,按求得的公式用位移外推法计算了单边裂纹板在动荷载作用下的动态应力强度因子.分析了粘性,弹模比和缝长对动态应力强度因子的影响,得出了一些有益的结论.     

异弹模界面裂缝的动态实验研究

本文利用电测法测量异弹模界面裂缝缝端的应力,进而推算出动态应力强度因子,并与特解边界元的计算结果作了比较,结果表明,两者的一致性较好.     

Boundary element weight function analysis of a strip yield crack in a rotating disk

The boundary element method combined with subtration of Bueckner singular fields are used to obtain weight functions for an internal edge crack in a rotating annular disk. A previously developed, general representation of the weight function is used which leads to integrals that can be evaluated analytically to obtain the stress intensity factor and surface displacements of the crack. The determination of crack tip opening displacements for the strip yield crack is reduced to a non-singular integral which can be evaluated in closed form. The strip yield zone length and crack tip opening displacement are determined for an internal radial crack in a rotating annular disk for a range of crack lengths and rotational speeds.     

Anti-plane dynamic hole–crack interaction in a functionally graded piezoelectric media

The anti-plane dynamic problem of a functionally graded piezoelectric plane containing a hole–crack system is treated by a non-hypersingular traction-based boundary integral equation method. The material parameters vary exponentially in the same manner in an arbitrary direction. The system is loaded by an incident SH-type wave, and impermeable boundary conditions are assumed. Using a frequency-dependent fundamental solution of the wave equation, the boundary value problem is transformed into a system of integro-differential equations along the boundary of the hole and on the crack line. Its numerical solution yields the dynamic stress intensity factors and stress concentration factors. A parametric study reveals their dependence on the hole–crack scenario and its geometry, characteristics of the dynamic load and magnitude and direction of material inhomogeneity.     

含圆形嵌体弹性平面中径向裂纹问题的超奇异积分方程方法

根据含圆形嵌体平面问题在极坐标下的弹性力学基本解,使用Betti互换定理,在有限部积分意义下将问题归结为两个以裂纹岸位移间断为基本未知量、对于Ⅰ型和Ⅱ型问题相互独立的超奇异积分方程,对含圆形嵌体弹性平面中的径向裂纹问题进行了研究.根据有限部积分原理,建立了问题的数值算法.计算结果表明,嵌体半径、裂纹位置及材料剪切弹性模量等都对裂纹应力强度因子具有较为明显的影响.     

各向异性双材料界面裂纹扩展裂尖场

应用界面断裂力学理论和Stroh方法,研究了广义平面变形下动态裂纹沿着各向异性双材料界面扩展时的裂尖奇异应力及动态应力强度因子.双材料界面的动态裂尖区域特性主要由两个实矩阵W和D确定,且裂尖奇异应力和动态应力强度因子可以由包含这两个矩阵的柯西奇异积分方程确定,同时给出了动态应力强度因子和能量释放率的显示表达式.算例得出当裂纹以小速度扩展时,裂尖振荡因子ε与静态时几乎相同,当界面裂纹扩展速度接近瑞利波速时,ε趋于无穷大;同时得出应力强度因子及能量释放率随裂纹扩展速度的变化关系.     

Axisymmetric elastodynamic response from normal and radial impact of layered composites with embedded penny-shaped cracks

A method is developed for the dynamic stress analysis of a layered composite containing an embedded penny-shaped crack and subjected to normal and radial impact. Quantitatively, the timedependent stresses near the crack border can be described by the dynamic stress intensity factors. Their magnitude depends on time, on the material properties of the composite and on the relative size of the crack compared to the composite local geometry. Results obtained show that, for the same material properties and geometry of the composite, the dynamic stress intensity factors for an embedded (pennyshaped) crack reach their peak values within a shorter period of time and with a lower magnitude than the corresponding dynamic stress factors for a through-crack.     

Photoelastic validation of a theoretical solution for an edge cracked disk

In this paper, the theoretical solution developed by Vaughan and Wu for the stress analysis of a circular disk with a radial edge crack extending to its center is validated by photoelasticity. The photoelastic results include the fullfield isochromatics as well as measurements of the maximum shear stress at a number of test points. Additionally, the experimental stress intensity factor is extracted from the photoelastic data by Irwin's two-parameter method. Good agreement is observed when the theoretical stress field and stress intensity factor are compared with the experimental results. It is concluded that the Vaughan-Wu solution can be confidently applied in fracture mechanics analyses. The application of such a solution to the stress analysis of two-dimensional bodies with complex geometries subjected to complex loading is also noted.