Size and pH effect on electrical and conformational behavior of poly(acrylic acid): Simulation and experiment

Monte Carlo simulations, experimental titrations and fluorescence correlation spectroscopy experiments were used to investigate the conformational and electrical properties of polyacrylic acids (PAA). On the one hand, titration curves were calculated to get an insight into the role of pH on the degree of ionization and conformation of PAA chains. On the other hand, experimental potentiometric titrations of PAA were also achieved for different PAA molecular weights and compared to the calculated titration curves obtained by Monte Carlo coarse grained simulations. It was found that for a large range at intermediate PAA ionizations, a good correlation is obtained between experimental and simulations data thanks to the prominence of electrostatic interactions in this domain. The effect of ionic concentration and PAA molecular weight on the titration curves was also investigated. In order to get a better understanding of PAA conformational behavior, we also investigated PAA diffusion properties in aqueous solutions as a function of pH and ionic strength by fluorescence correlation spectroscopy (FCS), thanks to its high sensitivity to measure diffusion coefficients of tracer solutes. Good qualitative agreements were observed between experimental diffusivities and polymer properties calculated from MC simulations. It was shown that the high molecular weight PAA chains display more significant changes in diffusivity in agreement with the ionization degrees and conformational changes observed in the simulations.     

以聚阳离子三甲基烯丙基氯化铵与丙烯酰胺共聚物为基础的高分子复合物的合成和表征

以不同阳离子度及分子量的三甲基烯丙基氯化铵及丙烯酰胺共聚物［Ｐ（ＴＭ ｃｏ ＡＡｍ）］为基础与不同分子量的聚丙烯酸（ＰＡＡ）作用生成相应高分子复合物，进行了结构表征，探讨了ｐＨ值、组份聚合物分子量、阳离子度等对生成复合物的影响，阐述了其形成机制及ｐＨ敏感特性．     

Enzymatic hydrolysis of alpha- and beta-oligo(L-aspartic acid)s by poly(aspartic acid) hydrolases-1 and 2 from Sphingomonas sp. KT-1

The enzymatic hydrolysis of alpha- and beta-oligo(L-aspartic acid)s by PAA hydrolase-1 and PAA hydrolase-2 (purified from Sphingomonas sp. KT-1) was performed to elucidate the mechanism of the microbial degradation by Sphingomonas sp. KT-1 of the thermally synthesized alpha,beta-poly(D,L-aspartic acid) (tPAA). GPC analysis of the hydrolyzed products of alpha- and beta-tetra(L-aspartic acid)s by PAA hydrolase-1 has showed that PAA hydrolase-1 is capable of hydrolyzing only the specific amide bonds between beta-aspartic acid units. The RP-HPLC analysis of the enzymatic hydrolysis of beta-oligo(L-aspartic acid)s (4 and 5 mers) by PAA hydrolase-1 has suggested that the enzymatic hydrolysis of beta-oligo(L-aspartic acid)s occurs via an endo-mode cleavage. In contrast, PAA hydrolase-2 hydrolyzed both alpha- and beta-oligo(L-aspartic acid)s via an exo-mode cleavage to yield L-aspartic acid as a final product. A kinetic study on the enzymatic hydrolysis of alpha-oligo(L-aspartic acid)s (3 to 7 mers) by PAA hydrolase-2 has indicated that Km values are almost independent of the number of monomer units in oligomers of 4 to 7 mers, while that Vmax values are markedly dependent on the chain length and show a maximum value at 5 mer.     

Characterization of the collagen–vinyl graft copolymers prepared by the ceric ion method. I. Solution properties

Graft copolymerization of vinyl monomers on to collagen was carried out by the ceric ion method. The grafted vinyl polymer chains were isolated by both acid and enzymatic hydrolysis of the collagen backbone in order to characterize the graft copolymers. Proof of grafting was obtained through the detection of amino acid endgroups in the grafts isolated by both the methods. The grafts isolated gave the characteristic blue color normally associated with the presence of amino acids. The presence of amino acid endgroups was further confirmed by dinitrophenylation of the isolated grafts. The absorption spectra of the dinitrophenylated(DNP) grafts showed absorption maximum in the ultraviolet region of 340–360 mμ, characteristic of DNP-amino acids. Soluble collagen grafted with polyacrylamide(PAA) formed fibrils on heating to 37°C at neutral pH but, unlike the native collagen, these fibrils did not redissolve on cooling at 2°C. These results show that the redispersion property of soluble collagen was impaired, probably by attachment of the PAA side chains to the collagen molecule. The turbidimetric titration behavior of the grafts, their general behavior of swelling in different solvents, and the intrinsic viscosity of the copolymers in mixed solvents also provided additional proof of grafting.     

反相悬浮与非均相水解法合成阴离子聚丙烯酰胺的研究

采用反相悬浮与非均相水解相结合的方法合成了分子量大于 １０７ 的阴离子聚丙烯酰胺（ＡＰＡＡ）。研究了水解度（ＨＤ）与水解时间及体系 叫的关系、不同水醇比（Ｖ＿水／Ｗ＿醇）条件下 ＨＤ与时间的关系，ＨＤ与温 度的关系，同时研究了ＡＰＡＡ在溶液中的粘性行为，讨论了分子量的 测定方法。     

Interactions between poly(acrylic acid) and sodium dodecyl sulfate: isothermal titration calorimetric and surfactant ion-selective electrode studies

Interaction between a monodispersed poly(acrylic acid) (PAA) (M(W) = 5670 g/mol, M(w)/M(n) = 1.02) with sodium dodecyl sulfate (SDS) was investigated using isothermal titration calorimetry (ITC), ion-selective electrode (ISE), and dynamic light scattering measurements. Contrary to previous studies, we report for the first time evidence of interaction between SDS and PAA when the degree of neutralization (alpha) of PAA is lower than 0.2. Hydrocarbon chains of SDS cooperatively bind to apolar segments of PAA driven by hydrophobic interaction. The interaction is both enthalpy and entropy favored (deltaH is negative but deltaS is positive). In 0.05 wt % PAA solution, the SDS concentration corresponding to the onset of binding (i.e., CAC) is approximately 2.4 mM and the saturation concentration (i.e., C(S)) is approximately 13.3 mM when alpha = 0. When PAA was neutralized and ionized, the binding was hindered by the enhanced electrostatic repulsion between negatively charged SDS and PAA chains and improved solubility of the polymer. With increasing alpha to 0.2, CAC increases to approximately 6.2 mM, C(S) drops to 8.6 mM, and the interaction is significantly weakened where the amount of bound SDS on PAA is reduced considerably. The values of CAC and C(S) derived from different techniques are in good agreement. The binding results in the formation of mixed micelles on apolar PAA coils, which then expands and dissociates into single PAA chains. The majority of unneutralized PAA molecules exist as single polymer chains stabilized by bound SDS micelles in solution after the saturation concentration.     

Surface-grafted poly(acrylic acid) brushes as a precursor layer for biosensing applications: effect of graft density and swellability on the detection efficiency

Carboxyl groups along poly(acrylic acid) (PAA) brushes attached to the surface of a gold-coated substrate served as the precursor moieties for the covalent immobilization of amino-functionalized biotin or bovine serum albumin (BSA) to form a sensing probe for streptavidin (SA) or anti-BSA detection, respectively. Surface-grafted PAA brushes were obtained by acid hydrolysis of poly(tert-butyl acrylate) brushes, formerly prepared by surface-initiated atom transfer radical polymerization of tert-butyl acrylate. As determined by surface plasmon resonance, the PAA brushes immobilized with functionalized biotin or BSA probes not only showed good binding with the designated target analytes but also maintained a high resistance to nonspecific protein adsorption, especially those PAA brushes with a high surface graft density. Although the probe binding capacity can be raised as a function of the graft density of the PAA brushes or the amount of carboxyl groups along the PAA chains, the accessibility of the target analyte to the immobilized probe was limited at the high graft density of the PAA brushes. The effect was far more apparent for the BSA-anti-BSA probe-analyte pair than for the much smaller biotin-SA probe-analyte pair. The impact of the swellability of the PAA brushes, as tailored by the degree of carboxyl group activation, on both the sensing probe immobilization and analyte detection was also addressed. This investigation demonstrated that PAA brushes having a defined graft density have a promising potential as a precursor layer for biosensing applications.     

Comparison of methodologies for determination of residual peracetic acid in wastewater disinfection

The use of peracetic acid (PAA) in the disinfection of sanitary effluents provides an opportunity for the study of analytic methods that permit the determination of the residual concentration of the disinfectant in the effluent. The object of the present study is to compare different methodologies for the determination of residual PAA in concentrations recommended for disinfection of wastewater. The methodologies adopted in this study include three redox titration methods and one spectrophotometric method. Preliminary tests were performed by adding PAA (0.1; 0.5; 1.0; 5.0 and 10.0?mg?L^?1) to distilled water, and later reevaluated by applying the same concentrations of the disinfectant in wastewater. The results obtained were statistically evaluated and showed that the concentrations between 0.5 and 10?mg?L^?1 of PAA could be determined both by the cerimetric/iodometric titration method and by the spectrophotometric method using DPD chromophore with catalase. For concentrations between 0.1 and 0.5?mg?L^?1, only the spectrophotometric method provided satisfactory results.     

Interpolymer complex between poly(ethylene oxide) and poly(carboxylic acid)

An interpolymer complex was prepared by mixing aqueous solutions of poly(ethylene oxide) (PEO) and of a poly(carboxylic acid), i.e., poly(acrylic acid)(PAA), poly(methacrylic acid)(PMAA), or styrene-maleic acid copolymer(PSMA). The complexation mechanism was discussed on the basis of results of such experimental methods as viscosity, potentiometric titration, and turbidimetry. The hydrogen bond is primarily involved in these complexations, but the influence of hydrophobic interaction on complexation can not be ignored. If the degree of dissociation α of carboxylic acid or the degree of polymerization P_n of PEO was perceptibly changed, a stable complex was obtained at about α 0.1 or P_n (PEO) = 40 for PMAA, 200 for PAA. This fact indicates that more than a definite number of binding sites are necessary for a stable interpolymer complex to be formed and that cooperative interaction among active sites plays an important role in complex formation.     

Investigation of Hydrolysis in Poly（ethylene terephthalate） by FTIR-ATR

The hydrothermal aging of poly(ethylene terephthalate)(PET) was investigated at 70 95 °C. A new method to investigate the hydrolysis degree of PET by Fourier transform infrared spectroscopy(FTIR) was proposed. The spectra during the hydrothermal aging were measured using attenuated total reflection accessory(ATR). Peak resolving of carbonyl regions was performed, and the ratio of two groups of bands representing carboxylic acids and esters respectively were calculated to show the hydrolysis degree of ester groups in PET. The acid/ester ratio shows exactly the same trend as the average chain scission number per unit mass at various temperatures and thus can be used as a parameter to characterize the hydrolysis and random chain scission of PET. This method related to the hydrolysis mechanism directly, is simple, fast and convenient compared to the traditional methods such as viscometry, end-group titration and size exclusion chromatography(SEC). It may also be useful in hydrolysis characterization of other polyesters.     

Structural changes of polyacids initiated by their neutralization with various alkali metal hydroxides. Diffusion studies in poly(acrylic acid)s

The changes in the three-dimensional structure of the poly(acrylic acid), PAA, induced by incorporation of various alkali-metal counterions have been evaluated by studying diffusion of an uncharged probe (1,1'-ferrocenedimethanol) in the polymeric media. The studies are supported by the measurements of conductivity and viscosity of the polymeric media. Solutions of linear PAA of four different sizes (molecular weights: 450,000, 750,000, 1,250,000, 4,000,000) were neutralized with hydroxides of alkali metals of group 1 of the periodic table (Li, Na, K, Rb, Cs) to the desired neutralization degree. The transport properties of the obtained polyacrylates were monitored by measuring the changes in the probe diffusion coefficient during the titration of the polyacids. The probe diffusivity was determined from the steady-state current of the probe voltammetric oxidation at disk microelectrodes. Diffusivity of the probe increases with the increase in the degree of neutralization and with the increase in viscosity. It reaches the maximum value at about 60-80% of the polyacid neutralization. The way the probe diffusion coefficients change is similar in all polyacid solutions and gels. The increase in the size of a metal cation causes, in general, an enhancement in the transport of probe molecules. The biggest differences in the probe diffusivities are between lithium and cesium polyacrylates. The differences between the results obtained for cesium and rubidium are not statistically significant due to lack of good precision of the voltammetric measurements. The measurements of the electric conductivity of polyacrylates and the theoretical predictions supplemented the picture of electrostatic interactions between the polyanionic chains and the metal cations of increasing size. In all instances of the PAAs, the viscosity of the solutions rapidly increases in the 0-60% range of neutralization and then becomes constant in the 60-100% region. With the exception of the shortest chain polyacid, the formation of a rigid medium (gel) has been observed in the experiments with all cations. After the end point of the titration was passed, a sudden drop in the viscosity and the disappearance of the gelatinous structure were seen. The largest value of viscosity has been recorded for the longest chain polyacid. The change in the cation of the strong base used did not affect the viscosity of the polymeric system.     

The determination of penicillins by titrations with mercury(II) solution.

A simple technique, involving two titrations with mercury(II) solutions, is described for the determination of penicillins and their degradation products. The first titration, at pH 4–5 on an untreated penicillin solution, gives the amount of degradation products; the second titration, on a hydrolysed solution at the same pH, gives the sum of the degradation products and penicillin degraded during the hydrolysis. Enzymic hydrolysis is superior to alkaline hydrolysis for penicillinase-sensitive penicillins. Enzyme-resistant penicillins should be hydrolysed with alkali at optimum conditions, e.g. for cloxacillin at pH 13.5 for 5 min. A standard deviation of less than 0.5 % was obtained for the penicillins investigated. The method is absolute; calibration with standard penicillin is not necessary.     

热重法测定水解聚丙烯酰胺的水解度

本文研究了利用热重法测定水解聚丙烯酰胺的水解度.测定结果与定氮法和电位滴定法作了比较,发现此法较后两种方法准确、简便.     

High-capacity binding of proteins by poly(acrylic acid) brushes and their derivatives

Polymeric coatings with high protein-binding capacities are important for increasing the output of affinity-based protein purification and decreasing the detection limits of antibody microarrays. This report describes the use of thick poly(acrylic acid) (PAA) brushes to immobilize as much as 80 monolayers of protein. The brushes were prepared using a recently developed procedure that allows polymerization of 100-nm-thick poly(tert-butyl acrylate) films from a surface in just 5 min along with hydrolysis of these films to PAA in 15 min. Covalent binding of bovine serum albumin (BSA) to PAA brushes that were activated using standard coupling agents, however, resulted in immobilization of less than two monolayers of BSA because of competitive hydrolysis of the esters in the activated film. In contrast, derivatization of PAA with nitrilotriacetate (NTA)-Cu2+ complexes yielded films capable of binding many monolayers of protein via metal-ion affinity interactions. For example, derivatization of 55-nm-thick PAA films with NTA-Cu2+ allowed immobilization of about 15 monolayers (5.8 microg/cm2 or 58 nm) of BSA. The binding capacity was even higher for myoglobin (7.7 microg/cm2) and anti-IgG (9.6 microg/cm2). Remarkably, electrostatic adsorption of lysozyme in 55-nm-thick, underivatized PAA resulted in as much as 80 monolayers (16.2 microg/cm2 or 162 nm) of adsorbed protein. Polymer synthesis, derivatization, and swelling, as well as BSA immobilization kinetics and thermodynamics were characterized using reflectance FT-IR spectroscopy, ellipsometry, and protein assays.     

Synthesis of Poly(acrylic acid) Nanogels and Application in Loading and Release of an Oligothiophene Fluorophore and Its Bovine Serum Albumin Conjugate

Summary: Nanometer-sized poly(acrylic acid) (PAA) hydrogels were synthesized by emulsion polymerization of methyl acrylate and subsequent acid hydrolysis, and their pH-dependent swelling behaviour was studied by dynamic light scattering. To determine the suitability of PAA nanogels as pH-sensitive carriers for biomedical applications, loading and release of an oligothiophene fluorophore and its albumin conjugate onto the PAA nanogels were investigated as a function of pH by absorption and photoluminescence measurements. It was observed that loading and release processes of both the oligothiophene and its conjugate could be controlled by changing pH of their solutions.     

Rheological behavior of PAA–C n TAB complex: influence of PAA charge density and surfactant tail length in PAA semidilute aqueous solution

Interactions between anionic polyelectrolyte, poly(acrylic acid) (PAA), and cationic surfactant, alkyltrimethylammonium bromide (C _n TAB), were investigated by rheological measurements in semidilute PAA solution. The dependences of the rheological behavior on the chain length of the surfactant, PAA neutralization degree, and temperature were discussed. The results revealed that both dodecyl and cetyltrimethylammonium bromides (C₁₂TAB and C₁₆TAB) could increase the viscosity of PAA solution when the surfactant amounts surpassed a critical surfactant concentration (C _c), and C _c of C₁₆TAB was lower than that of C₁₂TAB at same PAA neutralization degree. The increase of viscosity is attributed to the surfactant micelles bridging of the polymer chains and confine the mobility PAA chain. On the other hand, it is found that the hydrogen bonding also played an important role in the PAA–C _n TAB system, especially in lower neutralization degree PAA solution, which results in the viscosity increase rapidly with the added surfactant into lower neutralization degree PAA solution.     

Synthesis and aggregation behavior of pluronic F87/poly(acrylic acid) block copolymer in the presence of doxorubicin

Poly(acrylic acid) (PAA) was polymerized on both termini of Pluronic F87 copolymer using the atom transfer radical polymerization technique to produce a novel block copolymer, PAA-b-F87-b-PAA (F87PAA). The loading of a cationic anticancer drug, doxorubicin (DOX), to F87PAA at different pH values was investigated using isothermal titration calorimetry (ITC), laser light scattering techniques, and UV-vis spectroscopy. At pH of 4.3-7.1, the ITC profile exhibited a significant exothermic peak, which indicated that the drug loading is an enthalpically driven process. At a pH of 4.3, the enthalpy maximum was significantly reduced in the presence of 2 M urea, indicating the existence of hydrogen bonds between the DOX and F87PAA copolymer. At a pH of 7.1, the fraction of bound DOX was close to the stoichiometric proportion of 1:1 to the molar concentration of carboxyl groups in the copolymer, where the drug loading is governed by electrostatic and stacking interactions. The TEM image of the complex indicated the formation of large compound micelles induced by the binding of DOX to the PAA segments.     

Interaction of metal ions with polypyrrole on polyacrylic acid matrix

The oxidative matrix polymerization of pyrrole (Py) by Fe(III), Cu(II), Ni(II), Co(II), and Zn(II) in the presence of polyacrylic acid (PAA) was studied and water‐soluble products along with insoluble products were obtained. The metal (Me) content of the insoluble part was determined by using atomic absorption spectroscopy (AAS). The effects of the oxidation potential of Me ions and ligands on the aggregation of polypyrrole (PPy) on the matrix polymer were measured by ultraviolet (UV)‐visible spectra. These findings also were checked by cyclic voltammetry (CV) measurements on PAA–Cu and PAA–PPy–Cu interactions. The conductometric titration results of PAA–PPy–Me ternary solutions were explained in the light of the interaction of Me ions with Py to polymerize on the PAA matrix resulting in some free carboxyl groups with a possibility of having Me–polymer complexes and a ternary complex (PAA–Me–PPy). The insoluble products were characterized by Fourier transform infrared (FTIR), elemental analysis, scanning electron microscopy (SEM), and four point probe conductivity measurements. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1115–1123, 1999     

凝胶渗透色谱用聚丙烯酸标样的制备

以二氧六环为良溶剂,石油醚为沉淀剂,通过等温沉淀分级,制得8种不同分子量的聚丙烯酸标样。 采用渐近校正法测定了它们的峰值分子量和分子量分布,建立了GPC校正曲线,并将其用于聚丙烯酸试样的测定。 结果表明,由渐进校正法测得的粘均分子量与粘度法测得的分子量之间的平均相对误差为7%,由渐进校正法测得的数均分子量与端基滴定法测得分子量之间的平均相对误差为9%。 将上述标样用于实际聚丙烯酸试样的测定,测得试样的粘均分子量与粘度法测定结果之间平均相对误差小于10%,优于以聚乙二醇为标样测定的平均相对误差（30%左右）。 本标样可用于具有与聚丙烯酸相似结构的阴离子聚电解质分子量分布的测定。     

新型线状-树枝状两亲嵌段共聚物的合成

本文设计合成了一系列由不同链长的聚丙烯酸(PAA)为亲水嵌段和不同代数聚苄醚树枝体(Dendr.PBE)为疏水嵌段的杂化共聚物(PAA-Dendr.PBE)。