Local environment in Ba2In2−xWxO5+3x/2 oxide ion conductors

The actual oxygen environment of the tungsten dopant in the Ba₂In_2−xW_xO_5+3x/2 solid solution was revealed by combining X-ray absorption spectroscopy at the tungsten L_I and L_III edges and at the indium L_I edge. Whatever the substitution ratio, the tungsten atoms exhibit a regular octahedral environment. When the substitution ratio increases, the oxygen vacancies are progressively filled until their total occupancy for x=2/3. For x?0.3, the perovskite structure is stabilised; the tungsten atoms are randomly distributed in the structure. Although X-ray diffraction revealed a cubic symmetry for these compositions, a local distortion of the indium environment is observed when a tungsten atom is in its surrounding.     

Magnetic diphase nanostructure of ZnFe2O4/γ-Fe2O3

Magnetic diphase nanostructures of ZnFe₂O₄/γ-Fe₂O₃ were synthesized by a solvothermal method. The formation reactions were optimized by tuning the initial molar ratios of Fe/Zn. All samples were characterized by X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, and Raman spectra. It is found that when the initial molar ratio of Fe/Zn is larger than 2, a diphase magnetic nanostructure of ZnFe₂O₄/γ-Fe₂O₃ was formed, in which the presence of ZnFe₂O₄ enhanced the thermal stability of γ-Fe₂O₃. Further increasing the initial molar ratio of Fe/Zn larger than 6 destabilized the diphase nanostructure and yielded traces of secondary phase α-Fe₂O₃. The grain surfaces of diphase nanostructure exhibited a spin-glass-like structure. At room temperature, all diphase nanostructures are superparamagnetic with saturation magnetization being increased with γ-Fe₂O₃ content.     

Intercalation behavior of n-alkylamines into an A-site defective layered perovskite H2W2O7

Intercalation behavior of n-alkylamines into a protonated form of an A-site defective layered perovskite H₂W₂O₇ has been investigated. Results from XRD indicate these materials are layered with the corresponding interlayer spacing governed by the n-alkylamine chain length, and a reversible intercalation and deintercalation property is observed among these intercalation compounds. The IR spectra of the intercalation compounds with n-alkylamines clearly show that n-alkyl chains possess an all-trans conformation, and H₂W₂O₇ accommodate n-alkylamines (C_nH_2n+1NH₂: n=3, 4, 7, 8, 12, 16) to form intercalation compounds via an acid-base mechanism. A linear relationship between the interlayer distance and the number of carbon atoms in n-alkyl chains is observed to show a bilayer arrangement of the n-alkyl chains with a tilt angle of ∼71.6°. Elemental analysis studies reveal that the amounts of intercalated n-alkylamines are about 2.0 mol per [W₂O₇]. Despite the surface geometry of H₂W₂O₇ is almost identical to those of layered perovskites H₂[A_n−1B_nO_3n+1], the amounts of intercalated n-alkylamines of them are different. A reasonable explanation is given through our research.     

Structure and properties of a novel cobaltate La0.30CoO2

The layered cobaltate La_0.30CoO₂ was prepared from Na_xCoO₂ precursor by a solid-state ionic exchange and was characterized by means of X-ray and neutron diffraction, magnetic, thermal and electric transport measurements. The compound consists of hexagonal sheets of edge-sharing CoO₆ octahedra interleaved by lanthanum monolayers. Compared to Na⁺ in the parent system, the La³⁺ ions occupy only one-third of available sites, forming a 2-dimensional superstructure. The deviation from the ideal stoichiometry La_1/3CoO₂ introduces extra hole carriers into the diamagnetic LS Co³⁺ matrix making the sample Pauli paramagnetic. The temperature dependence of the electrical conductivity in La_0.30CoO₂ follows Mott's T^−1/3 law up to about 400 K, which is in contrast with the standard metallic behavior in the Na⁺ homolog possessing the same formal doping. The experiments are complemented by electronic structure calculations for La_0.30CoO₂ and related Na_xCoO₂ systems.     

Structure and magnetic properties of RE2Cu2Cd

The ternary intermetallic compounds RE₂Cu₂Cd (RE=Y, Sm, Gd-Tm, Lu) were synthesized by induction-melting of the elements in sealed tantalum tubes. The samples were characterized by X-ray powder diffraction. The structure of Gd₂Cu₂Cd was refined from single crystal X-ray diffractometer data: Mo₂FeB₂ type, space group P4/mbm, a=756.2(3), c=380.2(3) pm, wR2=0.0455, 321 F² values, 12 variables. The structures are 1:1 intergrowth variants of slightly distorted CsCl and AlB₂ related slabs of compositions RECd and RECu₂. The copper and cadmium atoms build up two-dimensional [Cu₂Cd] networks (257 pm Cu-Cu and 301 pm Cu-Cd in Gd₂Cu₂Cd) which are bonded to the rare earth atoms via short RE-Cu contacts (290 pm in Gd₂Cu₂Cd). Temperature dependent susceptibility measurements of RE₂Cu₂Cd with RE=Gd, Tb, Dy, and Tm show experimental magnetic moments which are close to the free RE³⁺ ion values. The four compounds show ferromagnetic ordering at T_C=116.7(2), 86.2(3), 48.4(1), and 14.5(1) K, respectively, as confirmed by heat capacity measurements. Dy₂Cu₂Cd shows a spin reorientation at T_N=16.9(1) K.     

Ion-beam irradiation of lanthanum compounds in the systems La2O3-Al2O3 and La2O3-TiO2

Thin crystals of La₂O₃, LaAlO₃, La_2/3TiO₃, La₂TiO₅, and La₂Ti₂O₇ have been irradiated in situ using 1 MeV Kr²⁺ ions at the Intermediate Voltage Electron Microscope-Tandem User Facility (IVEM-Tandem), Argonne National Laboratory (ANL). We observed that La₂O₃ remained crystalline to a fluence greater than 3.1×10¹⁶ ions cm⁻² at a temperature of 50 K. The four binary oxide compounds in the two systems were observed through the crystalline-amorphous transition as a function of ion fluence and temperature. Results from the ion irradiations give critical temperatures for amorphisation (T_c) of 647 K for LaAlO₃, 840 K for La₂Ti₂O₇, 865 K for La_2/3TiO₃, and 1027 K for La₂TiO₅. The T_c values observed in this study, together with previous data for Al₂O₃ and TiO₂, are discussed with reference to the melting points for the La₂O₃-Al₂O₃ and La₂O₃-TiO₂ systems and the different local environments within the four crystal structures. Results suggest that there is an observable inverse correlation between T_c and melting temperature (T_m) in the two systems. More complex relationships exist between T_c and crystal structure, with the stoichiometric perovskite LaAlO₃ being the most resistant to amorphisation.     

Synthesis and characterization of La2Mo2O9 obtained from freeze-dried precursors

La₂Mo₂O₉ ceramics have been prepared from freeze-dried precursors and their properties compared to those of lantanum molybdate obtained by conventional solid state (SS) reaction. All materials have been characterized by X-ray diffraction, scanning electron microscopy and thermal analysis (TGA/DTA/DSC and dilatometry) to characterize the phase formation and phase transition. When the freeze-dried method was applied, the synthesis temperature required to obtain dense samples was much lower than that for powders obtained by SS reaction. The morphology and structure of the oxide particle are significantly dependent on the synthesis method. The grain size is smaller, whereas the density of sintered pellets is higher for the freeze-dried precursor powder when compared with the SS reaction method. Impedance spectroscopy was used to measure the electrical conductivity of La₂Mo₂O₉ from 548 to 1123 K, in air, and to characterize the blocking effects of grain boundaries.     

EuZn2Si2 and EuZn2Ge2 Grown from Zn or Ga(ln)/Zn Flux

Single crystals of the novel ternary compounds EuZn₂Si₂ and EuZn₂Ge₂ were grown from pure gallium, indium, or zinc metal used as a flux solvent. Crystal properties were characterized using X-ray single-crystal analyses via Gandolfi and Weissenberg film techniques and by four-circle X-ray single-crystal diffractometry. The new compounds crystallize with ternary derivative structures of BaAl₄, i.e., EuZn₂Si₂ with ThCr₂Si₂-type (a=0.42607(2) nm, c=1.03956(5) nm, I4/mmm, R₁=0.038) and EuZn₂Ge₂ with CaBe₂Ge₂-type (a=0.43095(2) nm, c=1.07926(6) nm, P4/nmm, R₁=0.067). XAS and magnetic measurements on EuZn₂Si₂ and EuZn₂Ge₂ revealed in both compounds the presence of Eu²⁺ ions carrying large magnetic moments, which order magnetically at low temperatures. The magnetic phase transition occurs at T_N=16 and 7.5 K for the silicide and the germanide, respectively. In EuZn₂Si₂ there occurs a spin reorientation at 13 K and furthermore some canting of antiferromagnetically ordered moments below about 10 K. In EuZn₂Ge₂ a canted antiferromagnetic structure is formed just at T_N.     

High-pressure transitions in MgAl2O4 and a new high-pressure phase of Mg2Al2O5

Phase transitions in MgAl₂O₄ were examined at 21-27 GPa and 1400-2500 °C using a multianvil apparatus. A mixture of MgO and Al₂O₃ corundum that are high-pressure dissociation products of MgAl₂O₄ spinel combines into calcium-ferrite type MgAl₂O₄ at 26-27 GPa and 1400-2000 °C. At temperature above 2000 °C at pressure below 25.5 GPa, a mixture of Al₂O₃ corundum and a new phase with Mg₂Al₂O₅ composition is stable. The transition boundary between the two fields has a strongly negative pressure-temperature slope. Structure analysis and Rietveld refinement on the basis of the powder X-ray diffraction profile of the Mg₂Al₂O₅ phase indicated that the phase represented a new structure type with orthorhombic symmetry (Pbam), and the lattice parameters were determined as a=9.3710(6) Å, b=12.1952(6) Å, c=2.7916(2) Å, V=319.03(3) Å³, Z=4. The structure consists of edge-sharing and corner-sharing (Mg, Al)O₆ octahedra, and contains chains of edge-sharing octahedra running along the c-axis. A part of Mg atoms are accommodated in six-coordinated trigonal prism sites in tunnels surrounded by the chains of edge-sharing (Mg, Al)O₆ octahedra. The structure is related with that of ludwigite (Mg, Fe²⁺)₂(Fe³⁺, Al)(BO₃)O₂. The molar volume of the Mg₂Al₂O₅ phase is smaller by 0.18% than sum of molar volumes of 2MgO and Al₂O₃ corundum. High-pressure dissociation to the mixture of corundum-type phase and the phase with ludwigite-related structure has been found only in MgAl₂O₄ among various A²⁺B³⁺₂O₄ compounds.     

Synthesis, structural characterization and optical properties of a new cesium aluminum borate, Cs2Al2B2O7

A new borate, Cs₂Al₂B₂O₇, was synthesized by solid-state reaction. It crystallizes in the monoclinic space group P2₁/c with a=6.719(1) Å, b=7.121(1) Å, c=9.626(3) Å, β=115.3(1)°, and Z=2. In the structure, two AlO₄ tetrahedra and two BO₃ planar triangles are connected alternately by corner-sharing to from nearly planar [Al₂B₂O₁₀] rings, which are further linked via common O1 atom to generate layers in the bc plane. These layers then share the O3 atoms lying on a center of inversion to form a three-dimensional framework with Cs atoms residing in the channels. The IR spectrum confirms the presence of both BO₃ and AlO₄ groups and the UV-vis-IR diffuse reflectance spectrum indicates a band gap of about 4.13(2) eV.     

XRD and Si MAS-NMR spectroscopy across the β-Lu2Si2O7-β-Y2Si2O7 solid solution

Samples in the system Lu_2−xY_xSi₂O₇ (0?x?2) have been synthesized following the sol-gel method and calcined to 1300 °C, a temperature at which the β-polymorph is known to be the stable phase for the end-members Lu₂Si₂O₇ and Y₂Si₂O₇. The XRD patterns of all the compositions studied are compatible with the structure of the β-polymorph. Unit cell parameters are calculated as a function of composition from XRD patterns. They show a linear change with increasing Y content, which indicates a solid solubility of β-Y₂Si₂O₇ in β-Lu₂Si₂O₇ at 1300 °C. ²⁹Si MAS NMR spectra of the different members of the system agree with the XRD results, showing a linear decrease of the ²⁹Si chemical shift with increasing Y content. Finally, a correlation reported in the literature to predict ²⁹Si chemical shifts in silicates is applied here to obtain the theoretical variation in ²⁹Si chemical shift values in the system Lu₂Si₂O₇-Y₂Si₂O₇ and the results compare favorably with the values obtained experimentally.     

Fe2(SO4)3·xH2O-catalyzed per-O-acetylation of sugars compatible with acid-labile protecting groups adopted in carbohydrate chemistry

Fully acetylated saccharides are inexpensive and very useful starting materials for the synthesis of many naturally occurring glycosides, oligosaccharides, and glycoconjugates. Ferric sulfate hydrate (Fe₂(SO₄)₃·xH₂O) was found to be a valuable Lewis acid promoter in the per-O-acetylation reaction of saccharides with acetic anhydride in 100% of conversion rate and 88-99% yields. Interestingly, the procedure is perfectly compatible with the presence of a variety of acid-labile protecting groups, such as isopropylidene, benzylidene, trityl, and TBDMS groups. The reactions were simply performed by stirring the mixture of a sugar with a slight excessive acetic anhydride in the presence of 2.0 mol % of Fe₂(SO₄)₃·xH₂O at rt and the pure products were obtained by a simple dilution of the reaction mixture with dichloromethane and washings with aqueous Na₂CO₃.     

Reduction of Eu to Eu in MAl2Si2O8 (M=Ca, Sr, Ba) in air condition

In general, the reduction of Eu³⁺ to Eu²⁺ in solids needs an annealing process in a reducing atmosphere. In this paper, it is of great interest and importance to find that the reduction of Eu³⁺ to Eu²⁺ can be realized in a series of alkaline-earth metal aluminum silicates MAl₂Si₂O₈ (M=Ca, Sr, Ba) just in air condition. The Eu²⁺-doped MAl₂Si₂O₈ (M=Ca, Sr, Ba) powder samples were prepared in air atmosphere by Pechini-type sol-gel process. It was found that the strong band emissions of 4f⁶5d¹-4f⁷ from Eu²⁺ were observed at 417, 404 and 373 nm in air-annealed CaAl₂Si₂O₈, SrAl₂Si₂O₈ and BaAl₂Si₂O₈, respectively, under ultraviolet excitation although the Eu³⁺ precursors were employed. In addition, under low-voltage electron beam excitation, Eu²⁺-doped MAl₂Si₂O₈ also shows strong blue or ultraviolet emission corresponding to 4f⁶5d¹-4f⁷ transition. The reduction mechanism from Eu³⁺ to Eu²⁺ in these compounds has been discussed in detail.     

Pressure-induced structural transformations in lanthanide titanates: La2TiO5 and Nd2TiO5

The structure of orthorhombic rare earth titanates of La₂TiO₅ and Nd₂TiO₅, where Ti cations are in five-fold coordination with oxygen, has been studied at high pressures by X-ray diffraction (XRD), Raman scattering measurements, and quantum mechanical calculations. Both XRD and Raman results indicated two pressure-induced phase transitions during the process. An orthorhombic super cell (a×b×2c) formed at a pressure between 6 and 10 GPa, and then transformed to a hexagonal high-pressure phase accompanied by partial decomposition. The hexagonal high-pressure phase is quenchable. Detailed structural analysis indicated that the five-coordinated TiO₅ polyhedra remain during the formation of super cell, but the orthorhombic-to-hexagonal phase transition at high pressures is a reconstructive process, and the five-fold Ti-O coordination increased to more than 6. This phase transition sequence was verified by quantum mechanical calculations.     

Interactions of Ba2YCu3O6+y with the Gd3NbO7 buffer layer in coated conductors

A systematic study of the chemical interaction of Ba₂YCu₃O_6+y and Gd₃NbO₇ was conducted under two processing conditions: purified air (21% p_o2), and 100 Pa p_o2 (0.1% p_o2). Phases present along the pseudo-binary join Ba₂YCu₃O_6z and Gd₃NbO₇ were found to be in two five-phase volumes within the system. Three common phases that are present in all samples are (Y,Gd)₂Cu₂O₅, Ba(Y,Gd)₂CuO₅ and Cu₂O or CuO (depending on the processing conditions). The assemblies of phases can be categorized in three regions, with Ba₂YCu₃O_6+y: Gd₃NbO₇ ratios of (I)<5.5:4.5; (II)=5.5:4.5; and (III)>5.5:4.5. The lowest melting temperature of the system was determined to be ≈938 °C in air, and 850 °C at 100 Pa p_o2. Structure determinations of two selected phases, Ba₂(Gd_xY_1−x)NbO₆ (Fm3¯m, No. 225), and (Gd_xY_3−x)NbO₇ (C222₁, No. 20 and Ccmm, No. 63), were completed using the X-ray Rietveld refinement technique. Reference X-ray powder diffraction patterns for selected phases of Ba₂(Gd_xY_1−x)NbO₆ (x=0.2, 0.4, 0.6, and 0.8) and (Gd_xY_3−x)NbO₇ (x=0.6, 1.2, 1.8, 2.4 and 3) have been prepared for inclusion in the Powder Diffraction File (PDF).     

The crystal structure determinations and refinements of K2S2O7, KNaS2O7 and Na2S2O7 from X-ray powder and single crystal diffraction data

The crystal structures of K₂S₂O₇, KNaS₂O₇ and Na₂S₂O₇ have been solved and/or refined from X-ray synchrotron powder diffraction data and conventional single-crystal data. K₂S₂O₇: From powder diffraction data, monoclinic C2/c, Z=4, a=12.3653(2), b=7.3122(1), , β=93.0792(7)°, R_Bragg=0.096. KNaS₂O₇: From powder diffraction data; triclinic , Z=2, a=5.90476(9), b=7.2008(1), , α=101.7074(9), β=90.6960(7), γ=94.2403(9)°, R_Bragg=0.075. Na₂S₂O₇: From single-crystal data; triclinic , Z=2, a=6.7702(9), b=6.7975(10), , α=116.779(2), β=96.089(3), γ=84.000(3)°, R_F=0.033. The disulphate anions are essentially eclipsed. All three structures can be described as dichromate-like, where the alkali cations coordinate oxygens of the isolated disulphate groups in three-dimensional networks. The K-O and Na-O coordinations were determined from electron density topology and coordination geometry. The three structures have a cation-disulphate chain in common. In K₂S₂O₇ and Na₂S₂O₇ the neighbouring chains are antiparallel, while in KNaS₂O₇ the chains are parallel. The differences between the K₂S₂O₇ and Na₂S₂O₇ structures, with double-, respectively single-sided chain connections and straight, respectively, corrugated structural layers can be understood in terms of the differences in size and coordinating ability of the cations.     

Electronic structure and photocatalytic properties of ABi2Ta2O9 (A=Ca, Sr, Ba)

A new series of layered perovskite photocatalysts, ABi₂Ta₂O₉ (A=Ca, Sr, Ba), were synthesized by the conventional solid-state reaction method and the crystal structures were characterized by powder X-ray diffraction. The results showed that the structure of ABi₂Ta₂O₉ (A=Ca, Sr) is orthorhombic, while that of BaBi₂Ta₂O₉ is tetragonal. First-principles calculations of the electronic band structures and density of states (DOS) revealed that the conduction bands of these photocatalysts are mainly attributable to the Ta 5d+Bi 6p+O 2p orbitals, while their valence bands are composed of hybridization with O 2p+Ta 5d+Bi 6s orbitals. Photocatalytic activities for water splitting were investigated under UV light irradiation and indicated that these photocatalysts are highly active even without co-catalysts. The formation rate of H₂ evolution from an aqueous methanol solution is about 2.26 mmol h^-1 for the photocatalyst SrBi₂Ta₂O₉, which is much higher than that of CaBi₂Ta₂O₉ and BaBi₂Ta₂O₉. The photocatalytic properties are discussed in close connection with the crystal structure and the electronic structure in details.     

Thermoelectric properties of Ag-doped n-type (Bi2Te3)0.9-(Bi2−xAgxSe3)0.1 (x=0-0.4) alloys prepared by spark plasma sintering

Ag-doped n-type (Bi₂Te₃)_0.9-(Bi_2−xAg_xSe₃)_0.1 (x=0-0.4) alloys were prepared by spark plasma sintering and their physical properties evaluated. When at low Ag content (x=0.05), the temperature dependence of the lattice thermal conductivity follows the trend of (Bi₂Te₃)_0.9-(Bi₂Se₃)_0.1; while at higher Ag content, a relatively rapid reduction above 400 K can be observed due possibly to the enhancement of scattering of phonons by the increased defects. The Seebeck coefficient increases with Ag content, with some loss of electrical conductivity, but the maximum dimensionless figure of merit ZT can be obtained to be 0.86 for the alloy with x=0.4 at 505 K, about 0.2 higher than that of the alloy (Bi₂Te₃)_0.9-(Bi₂Se₃)_0.1 without Ag-doping.     

Synthesis, structure and magnetic properties of the S=1/2, one-dimensional antiferromagnet, Y5Re2O12

Single crystals of Y₅Re₂O₁₂ have been grown, and the crystal structure has been determined by X-ray diffraction. This compound crystallizes in space group C2/m with cell dimensions of a=12.4081(10) Å b=5.6604(5)Å, c=7.4951(6) Å, β=107.837(3)°, Z=2. The final refinement led to R1=0.0238, WR2=0.0459 for 1053 observed reflections with F>4σ(F₀). Edge-sharing ReO₆ octahedra form infinite linear [ReO₂O_4/2]_n chains along the b direction with alternating short and long Re-Re distances. Three crystallographically independent yttrium atoms surround O2 to form OY₄ tetrahedra, which share edges and corners in the ab plane to form a two-dimensional Y₅O₄ network which separates the [ReO₂O_4/2]_n magnetic chains. This compound is therefore isostructural with the series Ln₅Re₂O₁₂Ln=Gd-Lu, which have been known since 1969. The average Re oxidation state is +4.5 in the chains and a reasonable, if qualitative MO scheme results in one unpaired electron per Re dimer. Consistent with this, magnetic susceptibility data can be fitted to the one-dimensional antiferromagnetic Heisenberg model with S=1/2 and parameters J^intra/k=−89(1)K, g=2.15(4) and χ(TIP)=5(1)×10⁻⁴ emu/mol. There is no sign of long-range magnetic order down to 2 K. These results are contrasted with those for the isostructural Y₅Mo₂O₁₂.