Highly efficient modification of DNA polymerase β under conditions of direct and sensitized activation of photoreactive DNAs. Modification of cell extract proteins

dUTP and dCTP derivatives containing a 4-azido-2,3,5,6-tetrafluorobenzylideneaminooxy group were incorporated into the 3′-end of the DNA primer within complexes with the DNA-matrix as analogs of natural dTTP by virtue of catalytic activity of DNA polymerase β or endogenous DNA polymerases of the cell extract. The photoreactive DNAs synthesized in situ were used for affinity modification of DNA polymerase β and DNA-binding proteins of the cell extract. For the photoreactive DNA based on these analogs, the efficiency of formation of covalent adducts with DNA polymerase β under the highest degree of DNA complexation with the enzyme was determined. The yield of covalent DNA adducts with the enzyme was 28–47%, depending on the type of the analog. The effect of the sequence of the DNA template near the localization of the photoreactive group on the redistribution of covalent cross-links between the possible targets was demonstrated. A possibility of increasing the efficiency of DNA polymerase β modification in the presence of a substantial excess of photoreactive DNA using a sensitizer, a dUTP derivative containing a pyrene residue, was studied. When photoreactive DNA containing a 2,3,5,6-tetrafluoro-4-azidobenzoyl (FAB) group was used, about 60% of DNA polymerase β was covalently attached to DNA. Photoreactive dNTP analogs ensuring a high level of protein modification in the cell extract were found. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1273–1283, May, 2005.     

Cloning,Sequence Analysis and Three-dimensional Structure Prediction of DNA Pol I from Thermophilic <Emphasis Type="Italic">Geobacillus</Emphasis> sp. <Emphasis Type="Italic">MKK</Emphasis> Isolated from an Iranian Hot Spring

Molecular phylogenetic analysis of a novel thermophilic eubacterium isolated from an Iranian hot spring using 16S rDNA sequence showed that the new isolate belongs to genera Geobacillus. DNA pol I gene from this isolate was amplified, cloned, sequenced, and the three-dimensional (3D) structure of deduced amino acid sequence was predicted. Sequence analysis revealed the gene is 2,631 bp long, encodes a protein of 876 amino acids with a calculated molecular mass of 99 kDa, and belongs to family A DNA polymerases. Comparison of 3′–5′exonuclease domain of Klenow fragment (KF) with corresponding region of newly identified DNA pol I (MF), the large fragment of Bacillus stearothermophilus DNA pol I (BF) and Klentaq1, revealed not only deletions in three regions compared to KF, but that three of the four critical metal-binding residues in KF (Asp355, Glu357, Asp424, and Asp501) are altered in MF as well. Predicted 3D structure and sequence alignments between MF and BF showed that all critical residues in the polymerase active site are conserved.     

An Isosteric and Fluorescent DNA Base Pair Consisting of 4‐aminophthalimide and 2,4‐diaminopyrimidine as C‐Nucleosides

A 13mer DNA duplex containing the artificial 4‐aminophthalimide:2,4‐diaminopyrimidine (4AP:DAP) base pair in the central position was characterized by optical and NMR spectroscopy. The fluorescence of 4AP in the duplex has a large Stokes shift of Δλ =124 nm and a quantum yield of Φ _F=24 %. The NMR structure shows that two interstrand hydrogen bonds are formed and confirms the artificial base pairing. In contrast, the 4‐N ,N ‐dimethylaminophthalimide moiety prefers the syn conformation in DNA. The fluorescence intensity of this chromophore in DNA is very low and the NMR structure shows no significant interaction with DAP. Primer‐extension experiments with DNA polymerases showed that not only is the 4AP C nucleotide incorporated at the desired position opposite DAP in the template, but also that the polymerase is able to progress past this position to give the full‐length product. The observed selectivity supports the NMR results.     

O6‐Alkylguanine DNA Alkyltransferase Repair Activity Towards Intrastrand Cross‐Linked DNA is Influenced by the Internucleotide Linkage

Oligonucleotides containing an alkylene intrastrand cross‐link (IaCL) between the O⁶‐atoms of two consecutive 2′‐deoxyguanosines (dG) were prepared by solid‐phase synthesis. UV thermal denaturation studies of duplexes containing butylene and heptylene IaCL revealed a 20 °C reduction in stability compared to the unmodified duplexes. Circular dichroism profiles of these IaCL DNA duplexes exhibited signatures consistent with B‐form DNA. Human O⁶‐alkylguanine DNA alkyltransferase (hAGT) was capable of repairing both IaCL containing duplexes with slightly greater efficiency towards the heptylene analog. Interestingly, repair efficiencies of hAGT towards these IaCL were lower compared to O⁶‐alkylene linked IaCL lacking the 5′‐3′‐phosphodiester linkage between the connected 2′‐deoxyguanosine residues. These results demonstrate that the proficiency of hAGT activity towards IaCL at the O⁶‐atom of dG is influenced by the backbone phosphodiester linkage between the cross‐linked residues.     

Biochemical Properties and PCR Performance of a Family B DNA Polymerase from Hyperthermophilic Euryarchaeon <Emphasis Type="Italic">Thermococcus peptonophilus</Emphasis>

The Thermococcus peptonophilus (Tpe) DNA polymerase gene was expressed under the control of the T7lac promoter on pET-22b(+) in Escherichia coli BL21-CodonPlus(DE3)-RIL in order to fully elucidate its biochemical properties and evaluate its feasibility in polymerase chain reaction (PCR) application. The expressed enzyme was then purified by heat treatment followed by two steps of column chromatography after which optimum pH and temperature of the enzyme were evaluated to be 7.0 and 75 °C, respectively. The optimal buffer for PCR with Tpe DNA polymerase consisted of 50 mM Tris–HCl (pH 8.0), 2 mM MgCl₂, 80 mM KCl, and 0.02% Triton X-100. Tpe DNA polymerase revealed a 3.6-fold higher fidelity (3.37 × 10⁻⁶) than Taq DNA polymerase (12.13 × 10⁻⁶) and performed significantly more efficiently in PCR amplification than both Taq and Pfu DNA polymerases. Ratios of 31:1 of Taq to Tpe DNA polymerases allowed PCR amplification of targets up to 15 kb in length with a 2.2-fold higher fidelity than Taq DNA polymerase. The results of the PCR experiments indicate that Tpe DNA polymerase may provide a higher fidelity DNA amplification in a shorter reaction time.     

Squaramate‐Modified Nucleotides and DNA for Specific Cross‐Linking with Lysine‐Containing Peptides and Proteins

Squaramate‐linked 2′‐deoxycytidine 5′‐O‐triphosphate was synthesized and found to be good substrate for KOD XL DNA polymerase in primer extension or PCR synthesis of modified DNA. The resulting squaramate‐linked DNA reacts with primary amines to form a stable diamide linkage. This reaction was used for bioconjugations of DNA with Cy5 and Lys‐containing peptides. Squaramate‐linked DNA formed covalent cross‐links with histone proteins. This reactive nucleotide has potential for other bioconjugations of nucleic acids with amines, peptides or proteins without need of any external reagent.     

Primer Extension Reaction Assays for Incorporation of Deoxynucleotide Analogue into DNA

Incorporation of deoxynucleotide analogues into DNA is important for the expansion of DNA functions. Primer extension reactions are commonly used for the assay of such reaction events. However, current assay protocols generally rely on radiolabeling, fluorescence reporter labeling, or removal of specific deoxynucleotide triphosphate in the reaction mixture. Herein we report on the design of two novel assay protocols that utilize a dideoxynucleotide‐terminated template strand and a phosphorothiolate‐modified deoxynucleotide‐terminated template strand. We designed and synthesized a deoxyuridine triphosphate analogue (dU*TP) containing 2‐bromoisobutyryl group and demonstrated that it could be well recognized by ?29DNA polymerase, E. coli DNA polymerase I Klenow Fragment, Bst DNA polymerase Large Fragment, and E. coli DNA polymerase I Klenow Fragment (exo⁽), which translated to effective incorporation of dU*TP into DNA. dU*TP was also successfully incorporated into extremely long single‐stranded DNA at high‐density using ?29 DNA polymerase by rolling circle amplification.     

O6-Alkylguanine DNA Alkyltransferase Mediated Disassembly of a DNA Tetrahedron

Tetrahedron DNA structures were formed by the assembly of three-way junction ( TWJ ) oligonucleotides containing O⁶-2′-deoxyguanosine-alkylene-O⁶-2′-deoxyguanosine (butylene and heptylene linked) intrastrand cross-links (IaCLs) lacking a phosphodiester group between the 2′-deoxyribose residues. The DNA tetrahedra containing TWJs were shown to undergo an unhooking reaction by the human DNA repair protein O⁶-alkylguanine DNA alkyltransferase (hAGT) resulting in structure disassembly. The unhooking reaction of hAGT towards the DNA tetrahedra was observed to be moderate to virtually complete depending on the protein equivalents. DNA tetrahedron structures have been explored as drug delivery platforms that release their payload in response to triggers, such as light, chemical agents or hybridization of release strands. The dismantling of DNA tetrahedron structures by a DNA repair protein contributes to the armamentarium of approaches for drug release employing DNA nanostructures.     

Synthesis of Deoxynucleoside Triphosphates that Include Proline,Urea, or Sulfonamide Groups and Their Polymerase Incorporation into DNA

To expand the chemical array available for DNA sequences in the context of in vitro selection, I present herein the synthesis of five nucleoside triphosphate analogues containing side chains capable of organocatalysis. The synthesis involved the coupling of L ‐proline‐containing residues (dU^tPTP and dU^cPTP), a dipeptide (dU^FPTP), a urea derivative (dU^BpuTP), and a sulfamide residue (dU^BsTP) to a suitably protected common intermediate, followed by triphosphorylation. These modified dNTPs were shown to be excellent substrates for the Vent (exo^?) and Pwo DNA polymerases, as well as the Klenow fragment of E. coli DNA polymerase I, although they were only acceptable substrates for the 9°N_m polymerase. All of the modified dNTPs, with the exception of dU^BpuTP, were readily incorporated into DNA by the polymerase chain reaction (PCR). Modified oligonucleotides efficiently served as templates for PCR for the regeneration of unmodified DNA. Thermal denaturation experiments showed that these modifications are tolerated in the major groove. Overall, these heavily modified dNTPs are excellent candidates for SELEX.     

The Role of Bound Water on the Energetics of DNA Duplex Melting

A combination of common and low-temperature differential scanning calorimetry (DSC) techniques was used to detect the thermodynamic parameters of heat denaturation and of ice-water phase transitions for native and denaturated DNA, at different low water contents. We suggest that the main contribution to the enthalpy of the process of the heat denaturation of DNA duplex (35±5 kJ/mol bp) is the enthalpy of disruption of the ordered water structure in the hydration shell of the double helix (26±1 kJ/mol bp). It is possible that this part of the energy composes the non-specific general contribution (70%) of the enthalpy of transition of all type of duplexes. For DNA in the condensed state the ratioα=ΔC _p/ΔS ~2 is smaller than for DNA in diluted aqueous solutions (α≅2–4). This means that there are other sources for the large heat capacity change in diluted solutions of DNA – for example the hydrophobic effects and unstacking(unfolding) of single polynucleotide chains. This revised version was published online in July 2006 with corrections to the Cover Date.     

Simulation of interactions between DNA and diglycerides

Calculations by molecular mechanics methods showed that diglycerides containing stearic, oleic, linoleic, or linolenic acids can bind to DNA. The binding energy of diglycerides to the DNA minor groove is higher than that to the major groove. The bond energies of diglycerides to DNA were calculated as the sums of the contributions of the binding energies between DNA and two fatty acid residues. These energies depend on the structure of the fatty acid and the nucleotide composition of DNA and vary from 20 to 120 kcal mol⁻¹. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1741–1744, August, 2008.     

FeII Metallohelices Stabilize DNA G-Quadruplexes and Downregulate the Expression of G-Quadruplex-Regulated Oncogenes

DNA G-quadruplexes (G4s) have been identified within the promoter regions of many proto-oncogenes. Thus, G4s represent attractive targets for cancer therapy, and the design and development of new drugs as G4 binders is a very active field of medicinal chemistry. Here, molecular biophysics and biology methods were employed to investigate the interaction of chiral metallohelices with a series of four DNA G4s (hTelo, c-myc, c-kit1, c-kit2) that are formed by the human telomeric sequence (hTelo) and in the promoter regions of c-MYC and c-KIT proto-oncogenes. We show that the investigated water-compatible, optically pure metallohelices, which are made by self-assembly of simple nonpeptidic organic components around Fe^II ions and exhibit bioactivity emulating the natural systems, bind with high affinity to G4 DNA and much lower affinity to duplex DNA. Notably, both enantiomers of a metallohelix containing a m-xylenyl bridge ( 5 b ) were found to effectively inhibit primer elongation catalyzed by Taq DNA polymerase by stabilizing G4 structures formed in the template strands containing c-myc and c-kit2 G4-forming sequences. Moreover, both enantiomers of 5 b downregulated the expression of c-MYC and c-KIT oncogenes in human embryonic kidney cells at mRNA and protein levels. As metallohelices also bind alternative nucleic acid structures, they hold promise as potential multitargeted drugs.     

A DNA electrochemical sensor prepared by electrodepositing zirconia on composite films of single-walled carbon nanotubes and poly(2,6-pyridinedicarboxylic acid), and its application to detection of the PAT gene fragment

Carboxyl group-functionalized single-walled carbon nanotubes (SWNTs) and 2,6-pyridinedicarboxylic acid (PDC) were electropolymerized by cyclic voltammetry on a glassy-carbon electrode (GCE) surface to form composite films (SWNTs/PDC). Zirconia was then electrodeposited on the SWNTs/PDC/GCE from an aqueous electrolyte containing ZrOCl₂ and KCl by cycling the potential between −1.1 V and +0.7 V at a scan rate of 20 mV s⁻¹. DNA probes with a phosphate group at the 5′ end were easily immobilized on the zirconia thin films, because of the strong affinity between zirconia and phosphate groups. The sensors were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). EIS was used for label-free detection of the target DNA by measuring the increase of the electron transfer resistance (R _et) of the electrode surface after the hybridization of the probe DNA with the target DNA. The PAT gene fragment and polymerase chain reaction (PCR) amplification of the NOS gene from transgenically modified beans were satisfactorily detected by use of this DNA electrochemical sensor. The dynamic range of detection of the sensor for the PAT gene fragment was from 1.0 × 10⁻¹¹ to 1.0 × 10⁻⁶ mol L⁻¹ and the detection limit was 1.38 × 10⁻¹² mol L⁻¹.     

Interaction of water-soluble bridged porphyrin with DNA

A water-soluble porphyrin dimer (Por Dimer) containing eight positive charges, bridged by 4,4′-dicarboxy-2,2′-bipyridine, has been synthesized. With Meso-tetrakis(N-methyl-pyridium-4-yl)porphyrin (H₂TMPyP) as the reference compound, the water-soluble porphyrin dimer was investigated for its interaction with DNA by absorption, fluorescence, and circular dichroism (CD) spectroscopy. The apparent affinity binding constant (K _app = 1.2 × 10⁶) of Por Dimer binding to CT DNA was measured by a competition method with ethidium bromide (EB) (that of H₂TMPyP was 6.9 × 10⁶). The cleavage ability of Por Dimer to pBR322 plasmid DNA was studied by gel electrophoresis. The results suggest that the binding modes of Por Dimer were complex and involve both intercalation and outside binding. __________ Translated from Acta Chimica Sinica, 2007, 65(22): 2597–2603     

ATP‐Releasing Nucleotides: Linking DNA Synthesis to Luciferase Signaling

A new strategy is reported for the production of luminescence signals from DNA synthesis through the use of chimeric nucleoside tetraphosphate dimers in which ATP, rather than pyrophosphate, is the leaving group. ATP‐releasing nucleotides (ARNs) were synthesized as derivatives of the four canonical nucleotides. All four derivatives are good substrates for DNA polymerase, with K_m values averaging 13‐fold higher than those of natural dNTPs, and k_cat values within 1.5‐fold of those of native nucleotides. Importantly, ARNs were found to yield very little background signal with luciferase. DNA synthesis experiments show that the ATP byproduct can be harnessed to elicit a chemiluminescence signal in the presence of luciferase. When using a polymerase together with the chimeric nucleotides, target DNAs/RNAs trigger the release of stoichiometrically large quantities of ATP, thereby allowing sensitive isothermal luminescence detection of nucleic acids as diverse as phage DNAs and short miRNAs.     

Polymerase Synthesis of Photocaged DNA Resistant against Cleavage by Restriction Endonucleases

5‐[(2‐Nitrobenzyl)oxymethyl]‐2′‐deoxyuridine 5′‐O‐triphosphate was used for polymerase (primer extension or PCR) synthesis of photocaged DNA that is resistant to the cleavage by restriction endonucleases. Photodeprotection of the caged DNA released 5‐hydroxymethyluracil‐modified nucleic acids, which were fully recognized and cleaved by restriction enzymes.     

Thermodynamic and Mechanistic Insights into Translesion DNA Synthesis Catalyzed by Y‐Family DNA Polymerase Across a Bulky Double‐Base Lesion of an Antitumor Platinum Drug

To determine how the Y‐family translesion DNA polymerase η (Polη) processes lesions remains fundamental to understanding the molecular origins of the mutagenic translesion bypass. We utilized model systems employing a DNA double‐base lesion derived from 1,2‐GG intrastrand cross‐links of a new antitumor Pt^II complex containing a bulky carrier ligand, namely [PtCl₂(cis‐1,4‐dach)] (DACH=diaminocyclohexane). The catalytic efficiency of Polη for the insertion of correct dCTP, with respect to the other incorrect nucleotides, opposite the 1,2‐GG cross‐link was markedly reduced by the DACH carrier ligand. This reduced efficiency of Polη to incorporate the correct dCTP could be due to a more extensive DNA unstacking and deformation of the minor groove induced in the DNA by the cross‐link of bulky [PtCl₂(cis‐1,4‐dach)]. The major products of the bypass of this double‐base lesion produced by [PtCl₂(cis‐1,4‐dach)] by Polη resulted from misincorporation of dATP opposite the platinated G residues. The results of the present work support the thesis that this misincorporation could be due to sterical effects of the bulkier 1,4‐DACH ligand hindering the formation of the Polη–DNA–incoming nucleotide complex. Calorimetric analysis suggested that thermodynamic factors may contribute to the forces that governed enhanced incorporation of the incorrect dATP by Polη as well.     

Electrochemical Studies of the Interaction of 2‐Nitroacridone with DNA and Determination of DNA

A new acridone derivate 2‐nitroacridone (NAD) was synthesized and a new method of electrochemical probe has been proposed for the determination of salmon sperm DNA based on its interaction with NAD. The electrochemical behavior of interaction of NAD with DNA was investigated on glassy carbon electrode (GCE). In the presence of DNA, the peak current of NAD decreases and the peak potential shifts to a more positive potential without appearance of a new peak. The binding ratio between NAD and salmon sperm DNA was calculated to be 2 : 1 and the binding constant was 3.19×10⁵ L/mol. The decrease of the peak current (ΔI_p) of NAD was proportional to the concentration of DNA in the range from 1.55×10^?7 M to 2.02×10^?6 M with the detection limit of 3.10×10^?8 M, and DNA of synthetic sample was determined satisfactorily. Additionally, the binding mechanism was preliminarily discussed. The mode of interaction between NAD and DNA was found to be intercalation binding.     

Direct selective detection of genomic DNA from coliform using a fiber optic biosensor

Fiber optic biosensors operated in a total internal reflection format were prepared based on covalent immobilization of 25mer lacZ single-stranded nucleic acid probe. Genomic DNA from Escherichia coli was extracted and then sheared by sonication to prepare fragments of approximately 300mer length. Other targets included a 25mer fully complementary lacZ sequence, 100mer polymerase chain reaction (PCR) products containing the lacZ sequence at various locations, and non-complementary DNA including genomic samples from salmon sperm. Non-selective adsorption of non-complementary oligonucleotides (ncDNA) was found to occur at a significantly faster rate than hybridization of complementary oligomers (cDNA) in all cases. The presence of ncDNA oligonucleotides did not inhibit selective interactions between immobilized DNA and cDNA in solution. The presence of high concentrations of non-complementary genomic DNA had little effect on extent or speed of hybridization of complementary oligonucleotides. Detection of genomic fragments containing the lacZ sequence was possible in as little as 20 s by observation of the steady-state fluorescence intensity increase or by time-dependent rate of fluorescence intensity changes.