Preparation, properties and characterizations of halogen-free nitrogen-phosphorous flame-retarded glass fiber reinforced polyamide 6 composite

Halogen free nitrogen-phosphorous flame retardants (PMOP) were prepared through reaction of melamine and polyphosphoric acid in the presence of flame retardant modifier CM with silicotungistic acid as a catalyst in aqueous solution. FT-IR, XRD, DSC and TGA techniques were used to characterize the reaction product PMOP. The obtained flame retardants were then used to prepare flame retardant (FR) polyamide 6 (PA6) composite reinforced with glass fiber (GF) and the factors affecting the flame retardancy of the material were also investigated. The FR GF reinforced PA6 composite and the obtained charred layers were analyzed by utilizing TGA, SEM, FT-IR and XRD. The properties of the charred layer were connected with the flame retardancy of the corresponding material to reveal the flame retarding mechanism of FR GF reinforced PA6 composite. The experimental results show that PMOP flame retardant consists of melamine polyphosphate, melamine phosphate and possible melamine pyrophosphate. The presence of CM was found to improve the flame retardancy of FR GF reinforced PA6 composite. It was experimentally found that PMOP flame retardant, which is comparatively stable in the range of processing temperatures of PA6, is particularly suitable for flame retarding PA6 reinforced with GF. With increasing the flame retardant content, the flame retardancy of the FR reinforced material is not improved so obviously. However, the increase in the GF content greatly improves the flame retardancy of the composite, because GF greatly increases the char yield of material, decreases the maximal thermal decomposition rate, promotes the formation of charred layer with (PNO)_x structure and greatly increases the strength of the charred layer. The prepared FR GF reinforced PA6 composites have good comprehensive properties with flame retardancy 1.6 mm UL 94 V-0 level, tensile strength 76.8 MPa, Young's modulus 11.7 GPa, Izod notched impact strength 4.5 kJ/m², flexural strength 98.0 MPa and flexural modulus 7.2 GPa, showing a better application prospect.     

Flammability and Thermal Oxidative Degradation Kinetics of Magnesium Hydroxide and Expandable Graphite Flame Retarded Polypropylene Composites

The flammability and the thermal oxidative degradation kinetics of expandable graphite (EG) with magnesium hydroxide (MH) in flame‐retardant polypropylene (PP) composites were studied by limiting oxygen index (LOI), UL‐94 test, and thermogravimetric analysis (TGA). The results show that EG is a good synergist for improving the flame retardancy of PP/MH composite and the effect is enhanced with decreasing EG particle size. The Kissinger method and Flynn‐Wall‐Ozawa method were used to determine the apparent activation energy (E) for degradation of PP and flame retarded PP composites. The data obtained from the TGA curve indicate that EG markedly increases the thermal degradation temperature of PP/MH composites and improves the thermal stability of the composites. The kinetic results show that the values of E for degradation of flame retarded PP composites is much higher than that of neat PP, especially PP/MH composites with suitable amount of EG, which indicates that the flame retardants used in this work have a great effect on the mechanisms of pyrolysis and combustion of PP.     

Influence of oxidation state of phosphorus on the thermal and flammability of polyurea and epoxy resin

The focus of this study is an investigation of the effect of oxidation state of phosphorus in phosphorus-based flame retardants on the thermal and flame retardant properties of polyurea and epoxy resin. Three different oxidation states of phosphorus (phosphite, phosphate and phosphine oxide) additives, with different thermal stabilities at a constant phosphorus content (1.5 wt.%) have been utilized. Thermal and flame retardant properties were studied by TGA and cone calorimetry, respectively. The thermal stability of both polymers decreases upon the incorporation of phosphorus flame retardants irrespective of oxidation state and a greater amount of residue was observed in the case of phosphite. Phosphate was found to be better flame retardant in polyurea, whereas phosphite is suitable for epoxy resin. Phosphite will react with epoxy resin by trans-esterification, which is demonstrated by FTIR and ³¹P NMR. Further, TG–FTIR and XPS studies also provide information on flame retardancy of both polymers with phosphorus flame retardants.     

Mechanism and kinetics of the stabilization reactions of itaconic acid-modified polyacrylonitrile

The structural evolution and thermal behavior of polyacrylonitrile (PAN) homopolymer and copolymer [P(AN-IA)] containing about 1.5 mol% itaconic acid (IA) during stabilization in air were studied by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and thermogravimetry (TG). A new parameter Es=A1595cm⁻¹/A2243cm⁻¹ was defined to evaluate the extent of stabilization. The kinetic parameters, viz. activation energy (E_a) and pre-exponential factor (A) of the stabilization reactions were calculated by Kissinger method and Ozawa method. FTIR analysis indicated that the cyclization of nitrile groups was initiated at a lower temperature by the IA comonomer and the stabilization proceeded at a more moderate pace in P(AN-IA) than in PAN, while an IA additive was found to be decomposed and failed to initiate the cyclization at a lower temperature. The improvement effect of IA comonomer on the stabilization reactions was further confirmed by the dynamic thermal analysis and kinetic study.     

Synthesis and applications of biscyclic phosphorus flame retardants

The influence of structural effects of organo-phosphorus flame retardants (FRs) on their flame retardant action was investigated. A series of spirobisphosphorus compounds including 3,9-dibutyl-3,9-dioxo-2,4,8,10-tetraoxa-3,9-diphosphaspiro-5,5-undecane were prepared using various synthetic methods such as the Arbuzov reaction. The chemical structure of the product was confirmed by ¹H and ³¹P NMR. Thermogravimetric analysis (TGA) results reveal that these cyclic phosphorus compounds show a single step degradation in the range of 250-400 °C and act in the gas phase rather than in the condensed phase. The obtained products were blended with an acrylonitrile-butadiene-styrene copolymer (ABS) or polycarbonate (PC) and their flame retardant behavior was evaluated using a UL-94 vertical test. V-0 ratings are achieved at 15-35 wt% loading of FR for ABS and at a much lesser amount of loading for PC. In both cases, it is apparent that the flame retardancy is strongly dependent on the P content of the flame retardant.     

Synthesis and thermal degradation behaviors of hyperbranched polyphosphate

A novel epoxy-terminated hyperbranched polyphosphate (E-HBPP) was synthesized by employing an A₂ + B₃ polycondensation and characterized by FTIR, ¹H NMR and GPC. E-HBPP was used as a reactive-type flame retardant for diglycidyl ether of bisphenol-A/m-phenylene diamine (DGEBA/mPDA) system. A series of flame retardant resins were prepared and their flame retardancy was monitored by the limiting oxygen index (LOI). The results showed that the LOI value of the cured samples and the degree of expansion of the formed char after burning increased along with the E-HBPP content. Their thermal degradation behaviors were investigated by thermogravimetric analysis and in situ FTIR and showed that the phosphate group of E-HBPP first degraded to form poly(phosphoric acid)s at around 300 °C, which had a major contribution to form the compact char to protect the sample from further degradation. The dynamic mechanical thermal properties were studied by dynamic mechanical thermal analysis (DMTA) and the results showed a good miscibility between E-HBPP and DGEBA. The mechanical properties of the cured films were also investigated. Less than 20% E-HBPP addition improved both the tensile strength and elongation at break.     

A highly sensitive and selective immunoassay for the detection of tetrabromobisphenol A in soil and sediment

Tetrabromobisphenol A is the most widely used brominated flame retardant. A sensitive and selective enzyme-linked immunosorbent assay (ELISA) for the detection of tetrabromobisphenol A was developed. The limit of detection and the inhibition half-maximum concentration of tetrabromobisphenol A in phosphate buffered saline with 10% methanol were 0.05 and 0.87 ng mL⁻¹, respectively. Cross-reactivity values of the ELISA with a set of important brominated flame retardants including tetrabromobisphenol A-bis(2,3-dibromopropylether), 2,2′,6,6′-tetrabromobisphenol A diallyl ether, hexabromocyclododecane, 1,2-bis(pentabromodiphenyl) ethane, 1,2-bis(2,4,6 tribromophenoxy) ethane, bis(2-ethylhexyl)-3,4,5,6-tetrabromophthalate, 2-ethylhexyl-2,3,4,5-tetrabromobenzoate, and polybrominated diphenyl ethers were <0.05%. Concentrations of tetrabromobisphenol A determined by ELISA in the soils from farmlands, the soils from an e-waste recycling site, and the sediments of a canal were in the range of non-detectable–5.6 ng g⁻¹, 26–104 ng g⁻¹ and 0.3–22 ng g⁻¹ dw, respectively, indicating the ubiquitous pollution of tetrabromobisphenol A. The results of this assay for 16 real world samples agreed well with those of the liquid chromatography–tandem mass spectrometry method, indicating this ELISA is suitable for screening of tetrabromobisphenol A in environmental matrices.     

Effect of a novel charring-foaming agent on flame retardancy and thermal degradation of intumescent flame retardant polypropylene

A new triazine polymer was synthesized by using cyanuric chloride, ethanolamine and ethylenediamine as raw materials. It is used both as a charring agent and as a foaming agent in intumescent flame retardants, designated as charring-foaming agent (CFA). Effect of CFA on flame retardancy, thermal degradation and mechanical properties of intumescent flame retardant polypropylene (PP) system (IFR-PP system) has been investigated. The results demonstrated that the intumescent flame retardant (IFR) consisting of CFA, APP and Zeolite 4A is very effective in flame retardancy of PP. It was found that when the weight ratio of CFA to APP is 1:2, that is, the components of the IFR are 64 wt% APP, 32 wt% CFA and 4 wt% Zeolite 4A, the IFR presents the most effective flame retardancy in PP systems. LOI value of IFR-PP reaches 37.0, when the IFR loading is 25 wt% in PP. It was also found that when the IFR loading is only 18 wt% in PP, the flame retardancy of IFR-PP can still pass V-0 rating, and its LOI value reaches 30.2. TGA data obtained in pure nitrogen demonstrated that CFA has a good ability of char formation itself, and CFA shows a high initial temperature of the thermal degradation. The char residue of CFA can reach 35.7 wt% at 700 °C. APP could effectively promote the char formation of the APP-CFA system. The char residue reaches 39.7 wt% at 700 °C, while it is 19.5% based on calculation. The IFR can change the thermal degradation behaviour of PP, enhance T_max of the decomposition peak of PP, and promote PP to form char, based upon the results of the calculation and the experiment. This is attributed to the fact that endothermic reactions took place in IFR charring process and the char layer formed by IFR prevented heat from transferring into inside of IFR-PP system. TGA results further explained the effective flame retardancy of the IFR containing CFA.     

Determination of arsenic and antimony in seawater by voltammetric and chronopotentiometric stripping using a vibrated gold microwire electrode

The oxidation potentials of As⁰/As^III and Sb⁰/Sb^III on the gold electrode are very close to each other due to their similar chemistry. Arsenic concentration in seawater is low (10–20 nM), Sb occurring at ∼0.1 time that of As. Methods are shown here for the electroanalytical speciation of inorganic arsenic and inorganic antimony in seawater using a solid gold microwire electrode. Anodic stripping voltammetry (ASV) and chronopotentiometry (ASC) are used at pH ≤ 2 and pH 8, using a vibrating gold microwire electrode. Under vibrations, the diffusion layer size at a 5 μm diameter wire is 0.7 μm. The detection limits for the As^III and Sb^III are below 0.1 nM using 2 min and 10 min deposition times respectively. As^III and Sb^III can be determined in acidic conditions (after addition of hydrazine) or at neutral pH. In the latter case, oxidation of As⁰ to As^III was found to proceed through a transient As^III species. Adsorption of this species on the gold electrode at potentials where Sb^III diffused away is used for selective deposition of As^III. Addition of EDTA removes the interfering effect of manganese when analysing As^III. Imposition of a desorption step for Sb^III analysis is required. Total inorganic arsenic (iAs = As^V + As^III) can be determined without interference from Sb nor mono-methyl arsenious acid (MMA) at 1.6 < pH < 2 using E_dep = −1 V. Total inorganic antimony (iSb = Sb^V + Sb^III) is determined at pH 1 using E_dep = −1.8 V without interference by As.     

Synthesis and characterization of a novel arylacetylene oligomer containing POSS units in main chains

A novel arylacetylene oligomer containing octamethyl POSS units in main chains was prepared from difluoride octamethyl POSS (diexo-(CH₃)₈Si₈O₁₁F₂) and diethynylbenzene (DEB) by Grignard reaction and characterized by FT-IR, NMR, WAXD, GPC, DSC, and TGA. The curing reaction kinetic of the oligomer was studied by Kissinger and Ozawa methods and the kinetic parameters were obtained. The cured polymer had good thermal and thermal-oxidative properties. TGA analyses demonstrated that the thermal decomposition temperature (T_d5) of the cured polymer in nitrogen and air were 503 and 479 °C, respectively.     

Thermal decomposition of polymer mixtures of PVC,PET and ABS containing brominated flame retardant: Formation of chlorinated and brominated organic compounds

The thermal decomposition of various mixtures of acrylonitrile butadiene styrene copolymer (ABS), ABS containing brominated epoxy resin flame retardant and Sb₂O₃, poly(ethylene terephthalate) (PET) and poly(vinyl chloride) (PVC) has been studied in order to clarify the reactions between the components of mixed polymers. More than 40 halogen-containing molecules have been identified among the pyrolysis products of mixed samples. Brominated and chlorinated aromatic esters were detected from the mixtures containing PET and halogen-containing polymers. A series of chlorinated, brominated and mixed chlorinated and brominated phenols and bisphenol A molecules have been identified among the pyrolysis products of polymer mixtures containing flame retarded ABS and PVC. It was established that the decomposition rate curves (DTG) of the mixtures were not simple superpositions of the individual components indicating interactions between the decomposition reactions of the polymer components. The maximal rate of thermal decomposition of both ABS and PET decreases significantly if the mixture contains brominated epoxy flame retardant and Sb₂O₃ synergist. The dehydrochlorination rate of PVC is enhanced in the presence of ABS or PET.     

High-temperature thermoelectric studies of A11Sb10 (A=Yb, Ca)

Large samples (6-8 g) of Yb₁₁Sb₁₀ and Ca₁₁Sb₁₀ have been synthesized using a high-temperature (1275-1375 K) flux method. These compounds are isostructural to Ho₁₁Ge₁₀, crystallizing in the body-centered, tetragonal unit cell, space group I4/mmm, with Z=4. The structure consists of antimony dumbbells and squares, reminiscent of Zn₄Sb₃ and filled Skutterudite (e.g., LaFe₄Sb₁₂) structures. In addition, these structures can be considered Zintl compounds; valence precise semiconductors with ionic contributions to the bonding. Differential scanning calorimetry (DSC), thermogravimetry (TG), resistivity (ρ), Seebeck coefficient (α), thermal conductivity (κ), and thermoelectric figure of merit (zT) from room temperature to at minimum 975 K are presented for A₁₁Sb₁₀ (A=Yb, Ca). DSC/TG were measured to 1400 K and reveal the stability of these compounds to ∼1200 K. Both A₁₁Sb₁₀ (A=Yb, Ca) materials exhibit remarkably low lattice thermal conductivity (∼10 mW/cm K for both Yb₁₁Sb₁₀ and Ca₁₁Sb₁₀) that can be attributed to the complex crystal structure. Yb₁₁Sb₁₀ is a poor metal with relatively low resistivity (1.4 mΩ cm at 300 K), while Ca₁₁Sb₁₀ is a semiconductor suggesting that a gradual metal-insulator transition may be possible from a Ca_11−xYb_xSb₁₀ solid solution. The low values and the temperature dependence of the Seebeck coefficients for both compounds suggest that bipolar conduction produces a compensated Seebeck coefficient and consequently a low zT.     

Combustion properties and thermal degradation behavior of polylactide with an effective intumescent flame retardant

An intumescent flame retardant spirocyclic pentaerythritol bisphosphorate disphosphoryl melamine (SPDPM) has been synthesized and its structure was characterized by Fourier transformed infrared spectrometry (FTIR), ¹H and ³¹P nuclear magnetic resonances (NMR). A series of polylactide (PLA)-based flame retardant composites containing SPDPM were prepared by melt blending method. The combustion properties of PLA/SPDPM composites were evaluated through UL-94, limiting oxygen index (LOI) tests and microscale combustion calorimetry (MCC) experiments. It is found that SPDPM integrating acid, char and gas sources significantly improved the flame retardancy and anti-dripping performance of PLA. When 25 wt% flame retardant was added, the composites achieved UL-94 V0, and the LOI value was increased to 38. Thermogravimetric analysis (TGA) showed that the weight loss rate of PLA was decreased by introduction of SPDPM. In addition, the thermal degradation process and possible flame retardant mechanism of PLA composites with SPDPM were analyzed by in situ FTIR.     

s-Triazine containing flame retardant hyperbranched polyamines: Synthesis, characterization and properties evaluation

A s-triazine containing hyperbranched polyamine (HBPA) has been synthesized from cyanuric chloride and aromatic diamine, 4,4′-(1,4-phenylenediisopropylidene) bis-aniline by nucleophilic displacement polymerization technique using an A₂ + B₃ approach with high yield (>80%). The synthesized polymer has been characterized by ¹H NMR, ¹³C NMR, FT-IR spectroscopic studies, elemental analysis, solubility and measurement of solution viscosity. The thermogravimetric (TG) analysis and differential scanning calorimetric (DSC) studies indicate that the polymer is thermostable upto 290 °C without any decomposition and has glass transition temperature of 243 °C. The flame retardancy of the pure powder polymer and the blends with linear commercial polymers such as plasticized PVC and LDPE with this hyperbranched polymer were investigated by the measurement of limiting oxygen index (LOI) value. The results show that the polymer has self-extinguishing characteristic (LOI = 38) and acts as an effective flame retardant additive for the above linear base polymers. The synergistic effect of this hyperbranched flame retardant was observed with triphenyl phosphine oxide in the same base polymers. The flammability efficiency of the hyperbranched polyamine is also evaluated by help of thermogravimetric (TG) analysis. The heat aging and leaching in different chemical media did not influence the flame retardancy of the blends.     

Bestimmung von bromierten Dibenzofuranen, die bei der Thermolyse von Polymeren mit Decabromdiphenylether als Flammschutzmittel gebildet werden

Summary Several plastics (polyester and hardened epoxideresins) with flame retardants as additives were tested for the formation of brominated dibenzofurans and dibenzodioxins under temperatures from 400 °C to 800 °C under aerobic conditions. 2,3,7,8-Tetrabromodibenzodioxin was not formed at a detection limit of 10 ppm (g·g^–1). At 400 °C, polymers containing decabromodiphenylether and antimony trioxide as flame retardant yield up to 4,000 ppm tetrabromodibenzofurans (TBrDF), besides other brominated dibenzofurans.In contrast, formation of polybrominated dibenzofurans does not occur with polymers containing decabromodiphenylether without antimony trioxide. 2,3,7,8-Tetrabromodibenzufuran could not be found at a detection limit of 20 ppm. Under the given thermolytical conditions, polymers with brominated flame retardants such as tetrabromobisphenol-A, polytribromostyrene, hydroxyethylated tetrabromobenzimidazolone, poly(pentabromobenzyl)acrylate or N,N-ethylene-bis-tetrabromophthalimide snowed no tendency to form polybrominated dibenzodioxins or dibenzofurans, even in the presence of antimony trioxide.     

The synthesis and properties of a reactive flame‐retardant unsaturated polyester resin from a phosphorus‐containing diacid

A transparent flame‐retardant unsaturated polyester resin (FR‐UPR) was obtained by reacting propylene glycol (PG) with maleic anhydride (MA), phthalic anhydride (PA), and 9,10‐dihydro‐10[2,3‐di(hydroxy carbonyl)propyl]‐10‐phosphaphenanthrene‐10‐oxide (DDP) synthesized from 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide (DOPO) and itaconic acid (ITA). The chemical structure of the resulting FR‐UPR was confirmed by FTIR, ¹H‐NMR and ³¹P‐NMR. The average molecular weight and viscosity of the FR‐UPR were determined by gel permeation chromatography (GPC) and viscometer, respectively. Thermal stability was studied by thermogravimetric analysis (TGA) both in air and nitrogen to determine the thermal decomposition mechanism, and the apparent activation energy (E_a) was calculated by both the Kissinger and Ozawa methods. Compared to unsaturated polyester resin (UPR), the higher E_a of FR‐UPR3 implied an improved thermal stability. According to variations of the limited oxygen index (LOI) values, the UL 94 rating of vertical burning test and scanning electron microscopy (SEM) photographs of char residues, the flame retardance of cured FR‐UPR was enhanced with increasing DDP content. The study of fire reaction tests, using a cone calorimeter, suggested that there was a significant reduction of flammability in the FR‐UPR. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermal degradation kinetics of polyimide containing 2,6-benzobisoxazole units

A novel polyimide (PI) based on 2,6-bis(p-aminophenyl)-benzo[1,2-d;5,4-d′]bisoxazole has been synthesized via a conventional two-stage procedure with bis(ether anhydrides) (HQDPA). The intermediate poly(amic acid) had inherent viscosities of 1.70 dl/g and could be thermally converted into light yellow polyimide film. The resulted polyimide showed excellent thermal stability, and the glass transition temperatures (T_g) were above 283 °C, the 5% weight loss temperature of the polymer was at 572 °C in N₂. The thermal degradation of the polyimide was studied by thermogravimetric analysis (TGA) in order to determine the actual reaction mechanisms of the decomposition process. The activation energy of the solid-state process was determined using Flynn-Wall-Ozawa method, which does not require knowledge of the reaction mechanism, which resulted to be 361.36 kJ/mol. The activation energy of different mechanism models and pre-exponential factor (A) were determined by Coats-Redfern method. Compared with the value obtained from the Ozawa method, the actual reaction mechanism obeyed nucleation and growth model, Avrami-Erofeev function (A₃) with integral form g(X) = [−ln(1−X)]³.     

Synergistic effects of layered double hydroxide with hyperfine magnesium hydroxide in halogen-free flame retardant EVA/HFMH/LDH nanocomposites

The synergistic effects of layered double hydroxide (LDH) with hyperfine magnesium hydroxide (HFMH) in halogen-free flame retardant ethylene-vinyl acetate (EVA)/HFMH/LDH nanocomposites have been studied by X-ray diffraction (XRD), transmission electron spectroscopy (TEM), thermogravimetric analysis (TGA), limiting oxygen index (LOI), mechanical properties' tests, and dynamic mechanical thermal analysis (DMTA). The XRD results show that the exfoliated EVA/HFMH/LDH can be obtained by controlling the LDH loading. The TEM images give the evidence that the organic-modified LDH (OM-LDH) can act as a disperser and help HFMH particles to disperse homogeneously in the EVA matrix. The TGA data demonstrate that the addition of LDH can raise 5-18 °C thermal degradation temperatures of EVA/HFMH/LDH nanocomposite samples with 5-15 phr OM-LDH compared with that of the control EVA/HFMH sample when 50% weight loss is selected as a point of comparison. The LOI and mechanical tests show that the LDH can act as flame retardant synergist and compatilizer to apparently increase the LOI and elongation at break values of EVA/HFMH/LDH nanocomposites. The DMTA data verify that the T_g value (−10 °C) of the EVA/HFMH/LDH nanocomposite sample with 15 phr LDH is much lower than that (T_g = −2 °C) of the control EVA/HFMH sample without LDH and approximates to the T_g value (−12 °C) of pure EVA, which indicates that the nanocomposites with LDH have more flexibility than that of the EVA/HFMH composites.     

Synthesis and curing of new aromatic azomethine epoxies with alkoxy side groups

Four new aromatic epoxies containing azomethine unit as a backbone linkage and alkoxy group as a flexible side chain were synthesized and characterized by means of IR and NMR spectrometry, and differential scanning calorimetry (DSC). The carbon number (n) of the alkoxy group was varied from hexyloxy (6) to nonyloxy (9). The cure kinetics for an epoxy/diamine-system was investigated by a DSC technique. From a multi-temperature scan method, developed by Ozawa and Kissinger, the activation energy (E) and the frequency factor (A) were determined and compared for the epoxies with different lengths of alkoxy group. The E and A value from Kissinger method are higher than those from Ozawa method for all side chain lengths. Each method shows that E increases slightly but A increases greatly when the length of the side chain increases. The large increase in A overriding the small increase in E may lead to the acceleration of the cure reaction as the side chain becomes longer.     

The formation of antimony oxychloride in flame retardant mixtures and its influence on flame retardant efficiency

Interaction of Sb₂O₃ with HCl vapour and chlorine-containing organic flame retardants in the presence and absence of polymers (polypropylene, polyethylene) has been studied at 473–773 K. It has been shown that SbOCl is formed in thermally degrading mixtures in the condensed phase. The influence of SbOCl formation on flame retardant efficiency is discussed.