Dry ice-originated supercritical and liquid carbon dioxide extraction of organic pollutants from environmental samples

Packed in a high-pressure vessel and under calculated conditions, dry ice can be used as a source of carbon dioxide for supercritical CO₂ extraction or liquid CO₂ of organic compounds from environmental samples. Coupled with a fluid modifier such as toluene, dry ice-originated supercritical CO₂ (Sc CO₂) achieves quantitative extraction of many volatile organic compounds (VOCs) and semivolatile organic compounds (SOCs) including polycyclic aromatic hydrocarbons (PAHs), n-alkanes, and polychlorinated biphenyls (PCBs) from solid matrices. Compared to contemporary manual or automated supercritical fluid extraction (SFE) technologies, this novel technique simplifies SFE to a minimum requirement by eliminating the need of a high-pressure pump and any electrical peripherals associated with it. This technique is highly suitable to analytical areas where sample preservation is essential but difficult in the sampling field, or where sample collection, sample preparation, and analysis are to be done in the field.     

The use of alternative fluids in on-line supercritical fluid extraction – capillary gas chromatography

A key feature differentiating analytical supercritical fluid extraction (SFE) from conventional liquid extraction is the possibility of varying the solvent strength of a supercritical fluid to achieve selective extractions of specific target compounds, or functional classes of compound, from complex matrices. This can be accomplished by using supercritical fluids other than carbon dioxide, for example, sulfur hexafluoride, nitrous oxide, or sulfur hexafluoride-modified carbon dioxide. The use of these fluids will be demonstrated by the characterization of complex environmental and petroleum matrices by directly coupled SFE – capillary GC. On-line SFE-GC involves the decompression of pressurized extraction fluid directly into the heated, unmodified capillary split injection port of the chromatograph. This paper will also show how, by adjustment of the extraction temperature and pressure, SFE selectivity may be further enhanced.     

Monitoring polychlorinated biphenyls in pine needles using supercritical fluid extraction as a pretreatment method

This paper reports on the first use of supercritical fluid extraction (SFE) of polychlorinated biphenyls (PCBs) from pine needles. Supercritical carbon dioxide was used as extraction fluid, and exhibited good extraction efficiencies and recoveries (>90%). GC-MS (selected ion monitoring mode) achieved both accurate identification and quantification of the PCBs. Compared with traditional time consuming multi-step sample preparation methods, SFE with carbon dioxide is easier to perform, and is a feasible alternative extraction procedure for the monitoring of PCBs in pine needle samples.     

Supercritical fluid extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin from sediment samples

Supercritical fluid extraction (SFE) is a promising technique for the extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) from environmental matrices such as contaminated sediments. The ability of SFE to solubilize many organic contaminants is well documented in industrial processes but its analytical applications were exploited just recently. In this study supercritical carbon dioxide and nitrous oxide and their mixtures with 2% methanol were used to extract 2,3,7,8-TCDD from aquatic sediments. An attractive feature of this process is that the carbon dioxide, being a virtually inert fluid, leaves no solvent residue on the processed sediment. Almost 100% of the 2,3,7,8-TCDD can be extracted from a sediment spiked with 200 μg/kg 2,3,7,8-TCDD in 30 minutes by using supercritical carbon dioxide + 2% methanol. Cleanup procedure is compared with the Soxhlet extraction procedure currently used as a standard method for extracting dioxins from sediment samples.     

Collection in analytical-scale supercritical fluid extraction

This review is a comprehensive summary of available collection techniques in supercritical fluid extraction (SFE), with emphasis on which parameters are especially important for a successful analyte collection. Environmental, biological and agricultural applications, including several types of sample matrices and analyte groups, are discussed with respect to choice of collection mode and optimization of collection conditions. This review also includes discussions about collection when a modifier is used or when the sample contains large amounts of fat or water, as well as possibilities to achieve enhanced selectivity.     

Mass balance of metal species in supercritical fluid extraction using sodium diethyldithiocarbamate and dibutylammonium dibutyldithiocarbamate.

The objective of this work is to track the amount of metal complexes distributed in the extraction cell, collection vial, and tubing used in supercritical fluid extraction (SFE) systems after progressive removal of metal ions in supercritical carbon dioxide (SC-CO2). Sodium diethyldithiocarbamate (NaDDC) and dibutylammonium dibutyldithiocarbamate (DBDC) ligands were used to form complexes with Cd, Cu, Pb, and Zn and CO(2)/5% methanol as a supercritical fluid. The mass balance of metal complexes were obtained before and after extraction, and metals in different locations in the system were flushed out using an organic solvent and nitric acid (HNO3). These results infer that the stability constant (beta) of the metal-ligand complex has a strong correlation with SFE. Because of the composition of the stainless-steel cell, Fe, Cr, and Ni or other trace elements in the cell might interfere with the mass balance of metal complexes in SFE due to an exchange mechanism taking place between the cell and the sample.     

Supercritical fluid extraction of polychlorinated biphenyls and pesticides from soil. Comparison with other extraction methods.

A comparison is made of supercritical fluid extraction (SFE) with two other techniques widely used for the extraction of polychlorinated biphenyls (PCBs) and organochlorine pesticides in soil. Extraction conditions for the SFE of PCBs and pesticides were first determined. An experimental approach was set up to determine the influence of different extraction parameters such as pressure, extraction time, static and dynamic extraction, restrictor type and collection solvent for off-line SFE. The use of carbon dioxide at 50 degrees C and 20 MPa, 10 min static followed by 20 min dynamic extraction with collection in iso-octane were been found to be the optimum conditions. Two types of soil, with a low and high content of organic carbon, respectively, spiked with 16 PCBs and organochlorine pesticides with a wide range of volatility and polarity at a level of 5 ng/g dry matter, were used as test materials. Conventional solvent extraction gives a good extraction yield for soil with a low content of organic carbon, but for peat soil the recoveries decrease dramatically to 30% for DDE, DDT and PCB 138 and 153. The recoveries with Soxhlet extraction are good, but an extra clean-up step before analysis is necessary. SFE gives good extraction yields for PCBs and organochlorine pesticides, varying between 85 and 105% with a reproducibility of 5% for each component for both types of soil. SFE is a fast, clean and reproducible method for the extraction of PCBs and organochlorine pesticides from these two soil matrices.     

Supercritical fluid extraction

Supercritical fluid extraction (SFE) provides for the first time a viable option to conventional and widely used Soxhlet extraction. The ability to change the solvating power of a single supercritical fluid by changing its density is an exceedingly attractive feature. An environmentally safe alternative such as supercritical carbon dioxide to organochlorine solvents which are widely used today in many government and industrial analytical laboratories for sample preparation is desirable. SFE may also constitute a viable alternative to other popular sample preparation techniques such as liquid-liquid extraction, solid phase extraction and purge/trap. Much research, however, must be done in order to understand, optimize and apply this technology. For example, (a) automation of extraction, (b) matrix effects, (c) new fluids/modifiers/additives, (d) trapping efficiency, (e) recovery of extracted analytes, and (f) extraction kinetics are some areas which need a greater understanding. This review is concerned with many of these topics as they relate to trace organic analysis wherein SFE is the primary sample preparation technique.     

Extraction of chromium(III) and chromium(VI) species from solid matrices using green solvent supercritical carbon dioxide.

Supercritical fluid extraction (SFE) provides an environmentally green technique to decontaminate chromium species from solid matrices using supercritical fluid carbon dioxide (ScCO2). Methanol and a small amount of water were found to significantly improve the extraction efficiency. The fluorinated chelating agent lithium bis(trifluoroethyl)-dithiocarbamate (LiFDDC) was effective in removing Cr ions in methanol-modified CO2 via in situ chelation/SFE technique. This paper indicates that the extraction efficiencies of Cr(III) and Cr(VI) from solid matrices can be greatly increased to more than 92% in the presence of a small amount of water, using 5% methanol-modified CO2 containing LiFDDC as an extractant. Chromium species in a wood waste sample in the form of chromated copper arsenate (CCA) can be extracted, but the extraction efficiency is not as good as expected, possibly due to the complications of the chemistry of Cr species in different oxidation states and to matrix effects.     

Supercritical fluid extraction in herbal and natural product studies - a practical review

Due to increasingly stringent environmental regulations, supercritical fluid extraction (SFE) has gained wide acceptance in recent years as an alternative to conventional solvent extraction for separation of organic compounds in many analytical and industrial processes. In the past decade, SFE has been applied successfully to the extraction of a variety of organic compounds from herbs and other plants. This review article presents the practical aspects of SFE applications in sample preparation, selection of modifiers, collection methods, on-line coupling techniques, means for avoiding mechanical problems, and approaches to optimization of SFE conditions. SFE can also be used to clean up pesticides from herb medicines. SFE processes can be modeled to acquire useful information for better understanding of the extraction, mechanisms and optimization of the extraction procedures. With increasing public interest in natural products, SFE may become a standard extraction technique for studying herbal, food and agricultural samples.     

Pesticide multiresidue analysis of 303 compounds using supercritical fluid extraction.

Compared to generally used solvent extraction methods, supercritical fluid extraction (SFE) with carbon dioxide has the advantages of automation and simple operation in preparing samples for pesticide residue analysis. This report is the outcome of our evaluation of the practicality of SFE for the preparation of samples for pesticide residue analysis. We studied the recovery of 303 compounds with several crops by a simultaneous analytical method of SFE, cartridge column purification, followed by GC/MS determination. We achieved 70 to 120% recovery for more than 80% of the examined compounds.     

Applications of supercritical fluid extraction (SFE) of palm oil and oil from natural sources

Supercritical fluid extraction (SFE), which has received much interest in its use and further development for industrial applications, is a method that offers some advantages over conventional methods, especially for the palm oil industry. SC-CO? refers to supercritical fluid extraction (SFE) that uses carbon dioxide (CO?) as a solvent which is a nontoxic, inexpensive, nonflammable, and nonpolluting supercritical fluid solvent for the extraction of natural products. Almost 100% oil can be extracted and it is regarded as safe, with organic solvent-free extracts having superior organoleptic profiles. The palm oil industry is one of the major industries in Malaysia that provides a major contribution to the national income. Malaysia is the second largest palm oil and palm kernel oil producer in the World. This paper reviews advances in applications of supercritical carbon dioxide (SC-CO?) extraction of oils from natural sources, in particular palm oil, minor constituents in palm oil, producing fractionated, refined, bleached, and deodorized palm oil, palm kernel oil and purified fatty acid fractions commendable for downstream uses as in toiletries and confectionaries.     

A Unified Sample Preparation System for Extraction of Various Analyte/Matrix Combinations

A supercritical fluid extraction/enhanced solvent extraction system (SFE/ESE) was used to remove polar and non-polar analytes from various matrices. Extraction of environmental pollutants from soil, additives from low density polyethylene, sulfa drugs from animal tissue, and drug from tablet was performed using both SFE and ESE. Results showed that a single instrumental system can be used to perform both ESE with organic solvents and SFE with carbon dioxide-based fluids. Each method has its own unique advantages and applications. The ability to carry out both solvent extraction and supercritical fluid extraction with one system has obvious economical advantages.     

Analysis of volatiles in polymers,part II. Supercritical fluid extraction/open tubular GC/MS

Summary Supercritical fluid extraction (SFE) connected to open tubular gas chromatography has been used for the analysis of non-polar to medium polar volatiles entrained in polymers. This polymer sheets, prepared with the aid of a microtome, have been extracted with supercritical carbon dioxide. The influence of sample area/weight ratio and extraction cell volume on the SFE performance has been investigated. Further, quantitative analysis was executed by stepwise extractions.A set of polybutylene terephthalate polymers, originating from different manufactures, has been analysed regarding entrained volatiles.     

Direct coupling of CO2 fluid extraction with capillary supercritical fluid chromatography

Summary An interface described in the literature was modified to accommodate small sample quantities. The simple and inexpensive method can be used to obtain rapid qualitative sample information of complex matrices by extraction in sub- or supercritical conditions (SFE) with a concurrent separation by capillary supercritical fluid chromatography (CSFC). Compared to traditional solvent extraction methods the potential for analyte degradation and contamination is minimized resulting in reduced sample amount necessary for extraction and separation, and also in faster extractions. Complex matrices of a plastic material, a natural product and a soil spiked with a substituted hydrocarbon test mixture were analyzed to show the usefulness of the interface.     

Supercritical carbon dioxide extraction and gas chromatography–mass spectrometry analysis of Gymnema sylvestre R.Br. roots

Supercritical fluid extraction (SFE) achieves a wide range of applications since the past decade as a sustainable green technology. The present study investigates the process for producing high yield by supercritical carbon dioxide (Sc-CO₂) extraction form Gymnema sylvestre R.Br. roots. The effect of temperature and pressure on the percentage of accumulative yield is demonstrated. It is found that the highest yield is obtained at the temperature of 60°C and the pressure of 10?MPa. A proper review showed that there is a lack in the study of Sc-CO₂ extraction of this plant especially for optimization of SFE process which makes this study useful and valuable. For more benefit, the extract which achieves highest percentage is subjected to gas chromatography–mass spectrometry to study its chemical composition and detect the active principle compounds which present with high concentration and expected to be responsible of the pharmaceutical properties of the extract.     

Direct continuous supercritical fluid extraction as a novel method of wine analysis. Comparison with conventional indirect extraction and implications for wine variety identification

Direct supercritical fluid extraction (SFE) of wines with carbon dioxide was compared to SFE of the sorbent used for solid-phase extraction of the same wine samples (SPE-SFE). Compared to SPE-SFE, the direct SFE results in amore specific and representative gas chromatographic fingerprint of the wine sample. The multivariate statistical processing of the direct SFE-GC data provides a clear-cut and sharp discrimination among the individual wine varieties while the discrimination based on the SPE-SFE-GC data is relatively poor. This finding reflects the adverse effects of additional analyte-sorbent interactions and sorption/desorption steps involved in SPE-SFE.     

并行捕集柱SFE-HPLC在线联用系统的构建及应用

在前期研究的基础上, 发展了采用自动十通阀/并行捕集柱接口构建了SFE和HPLC在线联用的新装置, 并利用该系统对灵芝子实体的超临界萃取过程进行实时监测.     

Comparison of solid-phase microextraction, supercritical fluid extraction, steam distillation, and solvent extraction techniques for analysis of volatile consituents in Fructus Amomi

Four sampling techniques, solid-phase microextraction (SPME), supercritical fluid extraction (SFE), steam distillation (SD), and solvent extraction (SE), were compared for the analysis of volatile constituents from a traditional Chinese medicine (TCM) of the dried ripe fruit of Fructus Amomi (Sha Ren). A total of 38 compounds were identified by gas chromatography/mass spectrometry. Different SFE and SPME parameters (modifier content, extraction pressure, and temperature for SFE and fibers, extraction temperature, and time for SPME) were studied. The results by SFE and SPME were compared with those obtained by conventional SD and SE methods. The results showed that SFE and SPME are better sample preparation techniques than SD and SE. Due to SFE's requirement for expensive specialized instrumentation, the simplicity, low cost, and speed of SPME make it a more appropriate technique for extraction of volatile constituents in TCMs.     

Determination of sunscreen agents in cosmetic products by supercritical fluid extraction and high-performance liquid chromatography

A rapid supercritical fluid extraction (SFE) procedure for the isolation of five of the most common sunscreen agents (2-ethylhexyl-p-dimethylaminobenzoate, 2-hydroxy-4-methoxybenzophenone, 2-ethylhexyl-p-methoxycinnamate, 4-methylbenzylidene camphor and 4-tert.-butyl-4′-methoxydibenzoylmethane) from cosmetic products is described. Investigation of the factors affecting the extraction efficiency in SFE indicated that sunscreen recoveries were affected mainly by the supercritical CO₂ pressure and by the trapping method. The sunscreens were analyzed by reversed-phase high-performance liquid chromatography after a 10-min extraction of the cosmetic product with CO₂ at 250 bar and 40°C, using sequential glass surface and C₁₈ sorbent as collection system. A quantitative comparison of SFE with a liquid extraction procedure was performed on commercial cosmetics. The SFE method yielded recoveries higher than 94.8% compared with conventional liquid extraction and exhibited a precision better than 5.3% relative standard deviation. Moreover, SFE minimized sample handling, reduced the consumption of harmful solvents and afforded a more effective purification of the cosmetic matrices.